Journal of Applied Electrochemistry (1971-2011)

Volume 1, Number 1 / February 1971

1-7	The kinetics of the silver (I)/silver (II) couple at a platinum electrode in perchloric and nitric acids	M. Fleischmann, D. Pletcher and A. Rafinski
9-17	Reaction in the silver zinc cell	M. I. Gillibrand, L. Langrish and G. R. Lomax
19-26	The effect of oxygen and SO₃ on corrosion of steels in molten sulphates	A. J. B. Cutler
27-33	Voltage decay at passivated zinc anodes	T. P. Dirkse
35-39	The concentration profiles in solution at dissolving anode surfaces (1) zinc, copper and brasses by the freezing techniques	R. K. Flatt, R. W. Wood and P. A. Brook
41-44	Electrochemical methods for SO₂ flue gas treatment	A. T. Kuhn
45-52	Discharge performance of electrodeposited manganese dioxides in Leclanché cells	A. Agopsowicz and F. L. Tye
53-63	Electrochemical behaviour and glass formation in molten bisulphates	M. D. Ingram, J. A. Duffy and S. M. Forbes
65-71	Magnesium-lead chloride batteries	J. R. Coleman
73-78	An electroanalytical study of the composition of molten sodium metaphosphate	E. Franks and D. Inman
81	Why another journal?	D. Inman

Volume 1, Number 2 / May 1971

79-90	Parametric study of the anode of an implantable biological fuel cell	A. J. Appleby, D. Y. C. Ng and H. Weinstein
99-101	The anodic behaviour of zinc in KOH solution. V: Galvanostatic polarization with an interruption	C. J. Bushrod and N. A. Hampson
103-112	Fluidized bed electrodes Part IV. Electrodeposition of copper in a fluidized bed of copper-coated spheres	M. Fleischmann, J. W. Oldfield and L. Tennakoon
113-126	Investigations in platinum metal group electrochemistry: I some iridium (IV) — iridium (III) systems	E. Jackson and D. A. Pantony
127-136	Screening of manganese dioxides for battery activity by thermogravimetric analysis	D. S. Freeman, P. F. Pelter, F. L. Tye and L. L. Wood
137-139	Electrochemistry of polycyclic aromatic hydrocarbons in molten tetrabutylammonium nitrate	G. R. Davies and B. J. Woodhall
141-146	The mercury/mercuric oxide electrode in high temperature aqueous solutions	B. Case and G. J. Bignold
147-151	The area-calibration of mercury electrodes	J. Broadhead, G. J. Hills and D. R. Kinnibrugh

Volume 1, Number 3 / August 1971

153-161	Ionic conductivity in lithium compounds	S. Pizzini
163-166	Chlorine production with highly reduced mercury emission	R. Johnsen and E. Böhm
167-177	The application of electrochemical methods to the study of the electroless nickel deposition from hypophosphite solutions	C. Gabrielli and F. Raulin
179-183	An impedance method for the characterization of porous carbons	R. D. Armstrong, D. Eyre, W. P. Race and A. Ince
185-188	Electrocatalytic production of OH radicals and their oxidative addition to benzene	R. Tomat and E. Vecchi
189-206	The mechanism of anodic oxidation of alloys	G. C. Wood and S. W. Khoo
207-212	Large-scale preparation of perchlorates directly from sodium chloride	H. V. K. Udupa, K. C. Narasimham, M. Nagalingam, N. Thiagarajan and G. Subramanian, et al.
213-217	The anodic behaviour of porous zinc electrodes	R. N. Elsdale, N. A. Hampson, P. C. Jones and A. N. Strachan
219-230	Residence time distributions and reaction kinetics in a fuel cell anode	M. Duduković, H. Weinstein and D. Y. C. Ng

Volume 1, Number 4 / November 1971

ii	Erratum
231-243	Fundamental and applied aspects of the electrochemistry of chlorine	G. Bianchi
245-251	The recovery of chlorine from hydrogen chloride Part 1: new method using a molten salt as the electrolyte	S. Yoshizawa, Z. Takehara, Y. Ito and K. Oka
253-259	The recovery of chlorine from by-product hydrogen chloride Part 2: Molten metal cathode method	S. Yoshizawa, A. Takehara, Y. Ito and K. Oka
261-268	The decomposition voltage of aluminium reduction cells. The influence of the alumina content in the bath	J. Thonstad, A. Solbu and A. Larsen
269-274	An evaluation of integration procedures for improving the precision of a.c. polarography	B. Fleet and R. D. Jee
275-278	The effect of pulsating potential on the morphology of metal deposits obtained by mass-transport controlled electrodeposition	A. R. Despic and K. I. Popov
279-281	Inhibition of sintering in molten carbonate fuel cell anodes	A. C. C. Tseung
283-291	Investigations in platinum metal group electrochemistry: II The Pd(II)-Pd° reduction	E. Jackson and D. A. Pantony
293-296	Effect of ionic strength on the passivation of zinc electrodes in KOH solutions	T. P. Dirkse and D. J. Kroon

Volume 2, Number 1 / February 1972

1-14	Electrical properties of soda lime silica glass using electrolysis at 600°C between molten tin and lead electrodes	J. K. Higgins
15-21	Electrolytic extraction of pure bismuth from an industrial residue from the treatment of an auriferous mineral	J. Amosse, P. Gueorguiev and M. J. Barbier
23-29	An optical cell for photographic studies of gas evolution during molten salt electrolysis	P. L. King and B. J. Welch
31-35	Anodic discharge of chloride ions on oxide electrodes	G. Faita and G. Fiori
37-42	Electron conduction in passive films on nickel	H. Yoneyama, S. Tanabe and H. Tamura
43-49	Carbon electrodes: Part 1. Hydrogen evolution in acidic solution	M. P. J. Brennan and O. R. Brown
51-57	Solid state ionics. High ionic conductivity solid in silver halide-silver sulphate system	T. Takahashi, E. Nomura and O. Yamamoto
59-69	Electrosynthesis of adiponitrile in undivided cells	F. Beck
71-79	Use of impedance measurements for the determination of the instant rate of metal corrosion	I. Epelboin, M. Keddam and H. Takenouti
81-82	Electrolytic preparation of an isomer pair of cobalt (III) mixed complexes	L. Campanella and V. Carunchio

Volume 2, Number 2 / May 1972

83-90	A mathematical model for platinum/ PTFE/porous nickel fuel cell oxygen diffusion electrodes	P. D. Power and M. J. R. Adams
91-96	Nouveau type de piles Leclanché	J. Augustynski, F. Dalard and J. Y. Machat
97-104	High oxide ion conduction in sintered Bi₂O₃ containing SrO, CaO or La₂O₃	T. Takahashi, H. Iwahara and Y. Nagai
105-112	On the distribution of current generation in porous gas electrodes	K. J. Euler
113-122	Electrochemical removal of copper ions from very dilute solutions	Douglas N. Bennion and John Newman
123-136	Zinc passivation and the effect of mass transfer in flowing electrolyte	E. D. Farmer and A. H. Webb
137-141	A study of electrolyte-phobic molten carbonate fuel cell electrodes	A. C. C. Tseung
143-149	The anodic oxidation of the binary compounds of the transition elements in sulphuric acid	R. D. Armstrong and A. F. Douglas
151-156	Ionic mass transfer in parallel plate electrochemical cells	D. J. Pickett and B. R. Stanmore
157-159	Semi-aqueous lithium-mercury oxide battery	G. Pistoia and M. Marinelli
161-162	Book review	J. G. Waller
163	International conference

Volume 2, Number 3 / August 1972

165-167	Voltammetric investigations of negative lead battery electrodes: The effect of organic expanders	H. Niklas and H. Jakobljevich
169-173	Preliminary studies on the electrolytic reduction of nitrobenzene to aniline	K. Swaminathan, P. N. Anantharaman, G. S. Subramanian and H. V. K. Udupa
175-181	Anodic pickling of stainless steels in sulphuric acid	A. Tamba and N. Azzerri
183-191	Galvanic corrosion resulting from rupture of a protective metallic coating	Keith B. Oldham and Florian Mansfeld
193-200	Evaluation of organic battery electrodes: Voltammetric study of the redox behaviour of solid quinones	H. Alt, H. Binder, G. Klempert, A. Köhling and G. Sandstede
201-210	Anodic chlorate formation on platinized titanium	D. Landolt and N. Ibl
211-215	The preparation and characterization of high performance Ag/C oxygen electrocatalysts	A. C. C. Tseung and Lucille L. Wong
217-222	The electrodeposition of aluminium from molten aluminium chloride/sodium chloride	R. C. Howie and D. W. Macmillan
223-229	Studies on a new method of preparation of zinc sulphide useful for luminescent phosphors	Alice Kurian and C. V. Suryanarayana
231-238	Recent advances in lithium solid state batteries	B. Scrosati
239-249	Proton migration in solids	J. Bruinink
ii	Errata

Volume 2, Number 4 / November 1972

251-263	Recent trends in the storage battery industry of Japan	H. Tagawa
265-273	The mechanism of discharge of sintered plate cadmium electrodes	R. D. Armstrong, A. D. Sperrin, F. L. Tye and G. D. West
275-281	The performance of a forced-flow parallel plate electrochemical reactor with dilute solutions	A. T. Kuhn and B. Marquis
283-287	The efficiency of chlorine evolution in dilute brines on ruthenium dioxide electrodes	A. T. Kuhn and C. J. Mortimer
289-299	Electrolytic removal of oxygen from gases by means of solid electrolyte	C. B. Alcock and S. Zador
301-308	Oxygen evolution during recharging of positive nickel oxide sinter electrodes	E. Buder
309-313	Irreversible behaviour of an electrochemical device for the monitoring of carbon in liquid sodium	C. Aksaranan and D. R. Morris
315-325	Mass exchange in a hydrogen-oxygen fuel cell with a capillary membrane	V. S. Bagotzky and Yu. M. Volfkovich
327-336	Engineering aspects of hydrazine-air fuel-cell power systems	M. R. Andrew, W. J. Gressler, J. K. Johnson, R. T. Short and K. R. Williams
337-343	The effect of kinetic and hydrodynamic factors on current efficiency in the chlorate cell process	A. R. Despić, M. M. Jakšić and B. Ž. Nikolić
345	The structure of anodic oxide films formed on pre-hydrated Al	N. F. Jackson and P. D. S. Waddell
347-348	A chronopotentiometric determination of D_Ag+ in α-Li₂ SO₄	D. Inman and M. Johnson
349-351	Indirect high current density reductions using cathodically generated solvated electrons	L. A. Avaca and A. Bewick
353-354	Electrochemical performance of boron carbide electrodes	E. Jackson and D. A. Pantony
ii	Erratum

Volume 3, Number 1 / February 1973

1-15	The electrochemical characterization of n-type gallium arsenide	T. Ambridge, C. R. Elliott and M. M. Faktor
17-22	Effects of mercury on the surfaces of polycrystalline copper, tin and zinc	R. Barnard
23-29	Solid state ionics—The ionic conductivity of the Ag₂S-Ag_1.70Te-AgX system (AgX; Ag₄P₂O₇, Ag₃PO₄ and AgPO₃)	Takehiko Takahashi, Eiichi Nomura and Osamu Yamamoto
31-36	Polarization effects in a porous air cathode due to the influence of the anode in an alkaline air-metal cell	J. Mrha, N. -E. Bärring and S. U. Falk
37-44	A system for accurate and fast measurement of the gas phase H/D ratio in electrolytic H/D separation factor experiments	M. Hammerli and W. J. Olmstead
45-52	Electrolysis of molten salt solutions containing PbSO₄
53-60	Electrolysis of molten salt solutions containing PbSO₄
61-64	Cathodic polarization of pure iron in concentrated alkaline solution	N. A. Hampson, R. J. Latham, A. N. Oliver, R. D. Giles and P. C. Jones
65-72	High oxide ion conduction in sintered oxides of the system Bi₂O₃-WO₃	Takehiko Takahashi and Hiroyasu Iwahara
73-75	Electrochemical oxidation of the surface of graphite fibres	N. L. Weinberg and T. B. Reddy
77-78	Book review	K. R. Williams

Volume 3, Number 2 / May 1973

79-90	Solid silver ion conductors	Takehiko Takahashi
91-98	Field crystallization of anodic films on tantalum	N. F. Jackson
99-102	Cathodic polarization characteristics of poly (4-vinylpyridine) bromine complex	T. Saito, H. Ikeda, Y. Matsuda and H. Tamura
103-112	An investigation into the recovery of zinc from zinc chloride-sodium chloride mixtures by electrolysis	D. J. Fray
113-121	Prediction of metal distribution in electroplating systems	H. Y. Cheh and C. C. Wan
123-127	New concepts in the scale-up of chlorine-caustic mercury cells	P. Gallone
129-135	Solid state ionics—the electrochemical analog memory cell with solid electrolyte	Takehiko Takahashi and Osamu Yamamoto
137-141	Electron micrographic examination of electrodeposited dispersion-hardened nickel	V. O. Nwoko and L. L. Shreir
143-151	An electrosynthesis of tetrafluoroethylene in molten salts	R. Dietz and M. E. Peover
153-159	On the influence of the annealing temperature and heavy current treatments on the porous structure of platinum electrodes and on the kinetics of the oxygen reaction at high temperatures	S. Pizzini, M. Bianchi, P. Colombo and S. Torchio
161-167	Time optimal electrodeposition of metals with a pulsating current	K. I. Popov, B. J. Lazarević and M. Kostić
168	24th meeting of I.S.E.
ii	Errata

Volume 3, Number 3 / August 1973

169-177	Permselective membrane separators for organic electrolyte batteries	F. W. Dampier
179-184	Anion distribution in alkaline silicates	E. Franks and A. Mukherjee
185-191	Corrosion of pure iron in fused sodium methaphosphate	S. Belcadi, J. J. Rameau and M. J. Barbier
193-200	The effect of foreign atoms on the properties of electrolytic zinc powders	I. N. Justinijanović, J. N. Jovićević and A. R. Despić
201-211	Electrical characteristics of soda lime silica glass at Pb, Pb/Cu and Bi/Cu anodes at high temperatures	J. K. Higgins and F. V. Roué
213-218	Carbon electrodes with phthalocyanine catalyst in acid medium	M. Musilová, J. Mrha and J. Jindra
219-225	The effect of pH on graphite wear in a chlorate cell process	Milan M. Jakšić
227-230	Electrochemical curing of epoxy resins	N. L. Weinberg, G. M. Blank, H. A. Aulich, A. Kentaro Hoffmann and T. B. Reddy
231-239	Carbon electrodes: Part 2. The anodic oxidation of N-propylamine	M. P. J. Brennan and O. R. Brown
241-249	The electrochemical behaviour of cobalt in alkaline nitrate melts at different temperatures	J. J. Podestá, R. C. V. Piatti and A. J. Arvía
251	Solid state batteries	J. G. Gibson
253	Book review	Graham Hills

Volume 3, Number 4 / November 1973

255-259	Investigation of the properties of the material zone below alloy surfaces prepared by electrolytic belt grinding or electrochemical machining	M. W. Breiter
261-270	A mathematical model for the porous lead dioxide electrode	Daniel Simonsson
271-283	Carbon-air electrode with regenerative short time overload capacity: Part 1. Effect of manganese dioxide	P. Żółtowski, D. M. Dražić and L. Vorkapić
285-289	Influence of surface treatment on the hysteresis effect in anodic polarization of stainless steels	N. Azzerri and G. Bombara
291-296	An electrosynthesis of sulphones	D. Knittel and B. Kastening
297-301	Zinc-air cell with neutral electrolyte	J. Jindra, J. Mrha and M. Musilová
303-305	Electronic property of photosensitive film formed during corrosion of copper in aqueous and non-aqueous solutions of bromine	J. Franco and N. K. Patel
307-314	Individual ionic activities and mass transfer in anodic chlorate formation	Milan M. Jakšić
315-319	Double layer capacity of graphite in cryolite-alumina melts and surface area changes by electrolyte consumption of graphite and baked carbon	J. Thonstad
321-325	High-rate plating of aluminium from the bath containing aluminium chloride and lithium aluminium hydride in tetrahydrofuran	Masaki Yoshio and Nobuhiko Ishibashi
327-335	Ionic conductivity of oxides based on Li₄SiO₄	A. R. West
337-339	The deleterious effect of high phosphoric acid concentrations on the kinetics of anodic hydrocarbon oxidation	S. B. Brummer, S. Kirkland and M. J. Turner
341	Electronic property of photosensitive film on copper in solutions of potassium iodide	Judas Franco and N. K. Patel
343-346	Comments on the paper ‘The performance of a forced-flow parallel plate electrochemical reactor with dilute solutions’ by A. T. Kuhn and B. Marquis	D. J. Pickett, A. T. Kuhn and B. Marquis
349	Conference on ‘Electrodes in Industrial Applications’
ii	Erratum

Volume 4, Number 1 / February 1974

1-6	The discharge capacity of the lead-lead dioxide couple in fluoboric and hydrofluosilicic acid	N. A. Hampson and C. J. Bushrod
7-16	Influence of cell geometry on the shape of polarization curves of porous Pt electrodes on a YSZ electrolyte	S. Pizzini, M. Bianchi, A. Corradi and C. Mari
17-23	A study of the production of glyoxylic acid by the electrochemical reduction of oxalic acid solutions	D. J. Pickett and K. S. Yap
25-48	Blackening in yttria stabilized zirconia due to cathodic processes at solid platinum electrodes	R. E. W. Casselton
49-52	The rôle of antimony in the lead-acid battery: Part 1. The effect of antimony on the anodic behaviour of lead	M. P. J. Brennan, B. N. Stirrup and N. A. Hampson
53-56	Anodic polarization of aluminium in organic electrolytes	Y. Matsuda, Y. ŌOuchi and H. Tamura
57-67	Ruthenium dioxide: a new electrode material. I. Behaviour in acid solutions of inert electrolytes	Dario Galizzioli, Franco Tantardini and Sergio Trasatti
69-73	Antimony removal from dilute solutions using a restrained bed electrochemical reactor	A. T. Kuhn and R. W. Houghton
75-80	The anodic behaviour of porous zinc electrodes. II. The effects of specific surface area of the zinc compact material	G. Coates, N. A. Hampson, A. Marshall and D. F. Porter
81-85	Recovery of electric power by direct chlorination of hydrogen or hydrocarbons in a high temperature fuel cell	S. Yoshizawa, Z. Takehara, Y. Ito, Y. Nakanishi and Y. Koyama
87-89	Problem of scale-up in electrochemical systems	A. S. Rao

Volume 4, Number 2 / May 1974

91-108	The rotating cylinder electrode	D. R. Gabe
109-115	A mathematical model for the porous lead dioxide electrode. II. The pseudo-steady state approach for low rates of discharge	Daniel Simonsson
117-124	The use of surface-active additives in electrochemical machining electrolytes	J. Bannard
125-134	The distribution of potential and electrochemical reaction rate in molten polysulphide electrodes	J. G. Gibson
135-142	Electrochemical capacitance characterization of n-type gallium arsenide	T. Ambridge and M. M. Faktor
143-154	Behaviour of nitrate impurity in nickelcadmium cells	R. Barnard, J. A. Lee and A. D. Sperrin
155-161	Transpassive dissolution of mild steel in NaNO₃ electrolytes	D. -T. Chin and K. -W. Mao
163-167	The anodic dissolution of iron-chromium alloys	J. P. Simpson and P. A. Brook
169-170	Proceedings of Electrochemical Engineering symposium-Newcastle 1971	D. J. Pickett
171	Book review	Giulio Milazzo
172	9th International power sources symposium

Volume 4, Number 3 / August 1974

173-190	Mass-transport problems and some design concepts of electrochemical reactors	R. W. Houghton and A. T. Kuhn
191-200	Thermodynamic diagrams of the copper/ molten potassium nitrate system	S. L. Marchiano and A. J. Arvia
201-209	Substitution of silver by various metal ions in modified AgI solid electrolytes	B. Scrosati, G. Pistoia, M. Lazzari and L. Peraldo Bicelli
211-218	Electrocatalytic activation of tungsten and tungstic oxide doped with platinum by means of ion implantation	M. Grenness, M. W. Thompson and R. W. Cahn
219-228	An electrochemical study of mass transfer in free convection at vertical arrays of horizontal cylinders	A. F. J. Smith and A. A. Wragg
229-234	Effect of surface finish obtained by electrochemical machining on the fatigue life of some titanium alloys	John Bannard
235-247	Possibility of utilizing electrochemical techniques for the evaluation of the content of organic impurities in water	A. De Battisti, L. Formaro and S. Trasatti
249-257	Analysis of porous alkaline Cd-electrodes. I. Anodic high rate transients	Per Selånger
259-262	Analysis of porous alkaline Cd-electrodes. II. Potential recovery transients after a period of discharge	Per Selånger
263-266	Analysis of porous alkaline Cd-electrodes. III. The application of charge porosity diagrams in electrode design	Per Selånger
267-273	The relationship between the effective current density and the effective overpotential in copper deposition by the pulsating potential	K. I. Popov, M. V. Vojnović, L. J. M. Vračar and B. J. Lazarević
275-277	Enhanced mass transfer on a rotating disc — electrode surface in coupled electric and magnetic fields	T. Z. Fahidy
279	Advanced instrumental methods in electrode kinetics

Volume 4, Number 4 / November 1974

279-288	Monitoring of impurities in molten lead by e.m.f. measurements. Application to the Harris process of lead refining	C. Grange and L. Heerman
289-292	Electrochemical perfluorination of organic acids. Contribution to the knowledge of the mechanism	Ch. Comninellis, Ph. Javet and E. Plattner
293-303	Consumption of graphite anodes in chlorine manufacture by brine electrolysis	J. H. Entwisle
305-315	Measurement and regulation of oxygen content in selected gases using solid electrolyte cells. I. Discontinuous use of gauges	J. Fouletier, H. Seinera and M. Kleitz
317-321	The mechanism of manganese electrodeposition	P. Radhakrishnamurthy and A. K. N. Reddy
323-330	Packed bed electrodes. I. The electrochemical extraction of copper ions from dilute aqueous solutions	A. K. P. Chu, M. Fleischmann and G. J. Hills
331-336	Packed bed electrodes. II. Anodic stripping and the recovery of copper from dilute solutions	A. K. P. Chu and G. J. Hills
337-345	Electrochemical behaviour of iron in alkaline sulphate solutions	D. Geana, A. A. El Miligy and W. J. Lorenz
347-350	Effect of vibration on the rate of mass transfer	M. I. Ismail, A. M. Al-Taweel and M. Z. El-Abd
351-356	Evaluation of expanders used in the negative lead battery electrode	A. A. Abdul Azim and A. A. Ismail
357-358	Letter to the editor: on optimization of electrolysis	T. Z. Fahidy, K. I. Popov and B. J. Lazarević
359	Notice Fourth Australian Electrochemistry Conference

Volume 5, Number 1 / February 1975

1-15	The electrochemistry of indium	R. Piercy and N. A. Hampson
17-38	Electrochemical aspects of solar energy conversion	M. D. Archer
39-41	A novel method of current efficiency determination	P. Radhakrishnamurthy and A. K. N. Reddy
43-53	Effect of density on the electrical conductance of aqueous sodium chloride solutions	J. E. Bannard
55-62	Halogen discharge on graphite electrodes from silver halide solid electrolytes	D. O. Raleigh
63-69	Ion-conductive macromolecular gels and membranes for solid lithium cells	G. Feuillade and Ph. Perche
71-78	Electrochemical studies on gold electrodes in acidic solutions of thiourea containing gold (I) thiourea complex ions	T. Groenewald
79-87	Carbon air electrode with regenerative short time overload capacity. II. Effects of duroquinone and 2-amino-1.4 naphthoquinone	P. Zóltowski, D. M. Dražić and L. Vorkapić
89-90	The use of electrochemical machining in biomedical engineering	J. Bannard
91-92	Book Review	J. O Bockris
93	Notices

Volume 5, Number 2 / May 1975

95-99	An experimental study of a single layer packed bed cathode in an electrochemical flow reactor	D. J. Pickett and B. R. Stanmore
101-103	An approximate design relationship for a fluidized bed electrode operating under conditions of mass transfer control	D. J. Pickett
105-109	Graphite electrodes for conductivity measurements on beta alumina	W. Baukal and R. Knoedler
111-120	Measurement and regulation of oxygen content in gases using solid electrolyte cells. III. Oxygen pump-gauge	J. Fouletier, G. Vitter and M. Kleitz
121-124	The effect of microstructure on the anodic behaviour of Cu-Be-Ni-Zr alloy system	A. Mihajlović, A. Mance and B. Djurić
125-128	Electroreduction of benzonitrile	V. Krishnan, K. Ragupathy and H. V. K. Udupa
129-135	Electrodeposition from a fluidized bed electrolyte. II. Effects of bed porosity and particle size	D. C. Carbin and D. R. Gabe
137-143	Electrodeposition from a fluidized bed electrolyte. III. Electrodeposit structure	D. C. Carbin and D. R. Gabe
145-150	Application of Electron Spectroscopy for Chemical Analysis (ESCA) to the study of iron-based battery electrodes	I. Olefjord
151-154	Study of electrodeposition on moving wires by potentiostatic pulses	A. Tvarusko
155-158	Platinum-iridium catalyzed titanium anode. I. Properties and use in chlorate electrolysis	R. T. Atanasoski, B. Ž. Nikolić, M. M. Jakšic and A. R. Despić
159-163	Platinum-iridium catalyzed titanium anode. II. Oxygen evolution	R. T. Atanasoski, B. Ž. Nikolić, M. M. Jaksić and A. R. Despić
165-167	Automatic scanning of log conductivity versus temperature: a time saving technique in solid electrolyte research	P. H. Bottelberghs, H. Erkelens, L. Louwerse and G. H. J. Broers
169-171	On the anodic dissolution of a high Si-Cr iron alloy (Durichlor 51)	D. L. Schwieg and T. Z. Fahidy
173-175	The effect of axial dispersion on the concentration distribution in an electrochemical reactor	T. Z. Fahidy
94	Erratum

Volume 5, Number 3 / August 1975

177-185	Measurement and regulation of oxygen content in selected gases using solid electrolyte cells. II. Differential gauge	J. Fouletier, H. Seinera and M. Kleitz
187-195	High oxide ion conduction in sintered oxides of the system Bi₂O₃-Y₂O₃	T. Takahashi, H. Iwahara and T. Arao
197-202	High oxide ion conduction in the sintered oxides of the system Bi₂O₃-Gd₂O₃	T. Takahashi, T. Esaka and H. Iwahara
203-214	Ruthenium dioxide: a new electrode material. II. Non-stoichiometry and energetics of electrode reactions in acid solutions	D. Galizzioli, F. Tantardini and S. Trasatti
215-220	Electrochemical drilling using alternating current	C. F. Noble and S. J. Shine
221-228	Limiting current on porous graphite electrodes under flow conditions	R. E. Sioda
229-235	Pit formation in relation to the etching of aluminium in chloride solutions	B. N. Stirrup, N. A. Hampson and I. S. Midgley
237-248	Effects of additives on the practical electrolytic separation of H and D isotopes. I. Pt and Fe	B. Dandapani and B. E. Conway
249-254	Concentrating, refining and purification by means of rotating bipolar electrode cell	P. R. Nadebaum and T. Z. Fahidy
255-262	Analysis of porous alkaline Cd-electrodes. IV. Optimization of current efficiency	P. Selånger
263-269	The use of alkali carbonates in carbon concentration cells	M. R. Hobdell and J. R. Gwyther

Volume 5, Number 4 / November 1975

271-277	Anodic behaviour of α-PbO₂ substrates containing different percentages of lower lead oxides	I. M. Issa, M. S. Abdelaal and A. A. Miligy
279-290	Electrodeposition of the alkali metals from propylene carbonate	J. Jorné and C. W. Tobias
291-297	Influence of mass transport on the performance of carbon gas-diffusion air electrodes in alkaline solution	I. Iliev, S. Gamburzev, A. Kaisheva and J. Mrha
299-303	Optimizing of a Zn/KOH/O₂ cell with silver cathode	I. Solacolu, M. Mavrodin-Tarabic and I. Onaca
305-312	Comparative investigations of packed and fluidized bed electrodes with non-conducting and conducting particles	G. Kreysa, S. Pionteck and E. Heitz
313-318	Materials balance in primary batteries. I. Lithium inorganic cells at low discharge rates	N. Marinčić
319-328	An automatic carrier concentration profile plotter using an electrochemical technique	T. Ambridge and M. M. Faktor
329-341	Conduction électrique du carbonate de propylène en champs électriques élevés: méchanismes de création de porteurs de charge en liaison avec l'électrochimie	B. Gosse, J. P. Gosse and N. Felici
343-349	The effect of silicate ion on the anodic behaviour of zinc in concentrated alkali	R. W. Lewis and J. Turner
351-358	Mössbauer spectroscopy investigation of the iron electrode during cycling in alkaline solution	Y. Geronov, T. Tomov and S. Georgiev
359-361	Transient and optical studies of free convective mass transfer during electrodeposition at single and multi-cylinder cathodes	A. A. Wragg, M. A. Patrick and L. H. Mustoe
362	Book review	J. Braunstein

Volume 6, Number 1 / January 1976

1-7	On the effects of antimony and glue on zinc electrocrystallization behaviour	D. J. Robinson and T. J. O'keefe
9-13	Electrochemical investigation of an illuminated TiO₂-electrode	W. Gissler, P. L. Lensi and S. Pizzini
15-22	Significance of logarithmic throwing index: a theoretical approach	R. Subramanian
23-32	The electrochemical fluorination of propene	F. G. Drakesmith and D. A. Hughes
33-36	Mechanical and corrosion properties of low antimony lead alloys	T. Rogatchev, St. Ruevski and D. Pavlov
37-43	Electrochemical dissolution of nickel in sulphuric acid by alternating current	K. Deo, S. G. Mehendale and S. Venkatachalam
45-49	Nouveau type de piles Leclanché. II. Etude en regime fort intermittent	F. Dalard, B. Le Gorrec, J. Y. Machat and J. Guitton
51-58	Materials balance in primary batteries. II. Lithium inorganic batteries at high discharge rates	N. Marinčić
59-65	Iron carburization in a calcium carbide molten salt solution	A. Bonomi, M. Parodi and C. Gentaz
67-77	Propriétés électrochimiques des solutions solides La₂O₃-SrO	F. Vanbaelinghem, A. Pelloux and C. Deportes
79-84	Galvanostatic polarizations of some Sn-Cd alloys in some carboxylic acids	M. S. Abdelaal, I. M. Issa and A. Zedan
85-88	The properties of some mixed organic electrolyte solutions and their effects on the anodic performances of Mg electrodes	T. Saito, H. Ikeda, Y. Matsuda and H. Tamura
89-92	On the generation of electrolyte flow by alternating electric and magnetic fields	R. Sunderman and T. Z. Fahidy
93	Book review	D. Pletcher
94	Notices

Volume 6, Number 2 / March 1976

95-98	Determination of the double-layer capacity of porous nickel in KOH in the presence of faradaic current	E. G. Gagnon
99-106	The characterization of Pt/Sn catalyst for the electrochemical oxidation of methanol	M. R. Andrew, J. S. Drury, B. D. McNicol, C. Pinnington and R. T. Short
107-118	Cyclic charge-discharge behaviour of sintered plate and planar cadmium electrodes	R. Barnard, K. Edmondson, J. A. Lee and F. L. Tye
119-126	Titration of aqueous solutions of phenols and determination of their bromination rate constants by means of ring-disc electrodes	F. Rauwel and D. Thévenot
127-134	A special type of raney-alloy catalyst used in compact biofuel cells	U. Gebhardt, J. R. Rao and G. J. Richter
135-138	Activated nickel anodes for average power fuel cells	M. Mavrodin-Tărăbîc, I. Onaca and I. Solacolu
139-146	Corrosion rate measurements by polarization resistance on hindered surfaces exhibiting pseudo-capacitance	N. Azzerri
147-153	Formation of a high polymer of acrylamide by utilizing Kolbe's electrolysis	S. Yoshizawa, Z. Takehara, Z. Ogumi and C. Nagai
155-157	The effect of pulsating potential electrolysis on the porosity of metal deposits	K. I. Popov, D. N. Keča, D. A. Drašković and B. I. Vuksanović
159-162	Electrochemical behaviour of indium in H₂SO₄	C. K. Watanabe and K. Nobe
163-169	Corrosion in alkali hydroxide solutions of electrolytic zinc powder containing codeposited lead	R. V. Moshtev and R. Stoicheva
171-181	Calculations on the effect of gas evolution on the current-overpotential relation and current distribution in electrolytic cells	Z. Nagy
183-188	Degagement anodique du chlore a une électrode de carbone vitreux dans un mélange fondu de NaCl et FeCl₃	M. Abraham, M. C. Trudelle and M. Poirier

Volume 6, Number 3 / May 1976

189-198	The effect of the additive cetyl trimethyl ammonium bromide on the electrodeposition of lead dioxide	K. S. A. Gnanasekaran, K. C. Narasimham and H. V. K. Udupa
199-209	Electrolytic manganese metal from chloride electrolytes. I. Study of deposition conditions	J. E. Lewis, P. H. Scaife and D. A. J. Swinkels
211-220	The hydrodynamics of a magnetoelectrolytic cell	S. Mohanta and T. Z. Fahidy
221-227	Pt/Sn bimetallic catalysts for the electro-oxidation of methanol: poisoning by silicate and phosphate unions	B. D. McNicol, A. G. Chapman and R. T. Short
229-235	The electrolytic reduction of chalcopyrite in acid solution	T. Biegler and D. A. Swift
237-242	Electrochemical properties of a new solid electrolyte in the system silver iodide — silver dichromate	B. Scrosati, A. Ricci and M. Lazzari
243-250	Electrodeposition of high purity manganese from low temperature (∼ −16° C) chloride electrolyte	S. Tajima, N. Baba and T. Midorikawa
251-255	AgI — Ag oxysalt electrolytes for solid state cells	A. Schiraldi, G. Chiodelli and A. Magistris
257-261	Electrochemical production of OH^. radicals and their reaction with toluene	R. Tomat and A. Rigo
263-268	Materials balance in primary batteries. III. Computer aided design for standard size lithium — thionyl chloride high power cells	N. Marinčić and D. B. Koffman
269-274	A study of some charge transfer complexes as electrodes in solid-state cells	M. Pampallona, A. Ricci, B. Scrosati and C. A. Vincent
275-277	Electrochemical grinding of a stainless steel felt	J. R. Duncan
279-282	Recovery of electric power by hydrocarbon chlorination in a fuel cell containing molten salt electrolyte using a redox system as anolyte	S. Yoshizawa, Z. Takehara, H. Inoguchi and Y. Ito

Volume 6, Number 4 / July 1976

283-291	Electrochemical reactions by tunnel current through thin insulating anodic oxide films on tantalum	H. Yoneyama, K. Ochi and H. Tamura
293-299	Anodic oxidation of zircaloy-2	A. Conte, A. Borello and A. Cabrini
301-310	Electrodeposited manganese dioxide with preferred crystal growth	E. Preisler
311-320	Semiconductor properties of manganese dioxide	E. Preisler
321-331	Electrodeposition of binary alloys: an account of recent developments	R. D. Srivastava and R. C. Mukerjee
333-338	Anodic behaviour of titanium in concentrated sulphuric acid solutions. Influence of some oxidizing inhibitors	Z. Abdel Hady and J. Pagetti
339-345	Dependence of the properties of the lead-acid battery positive plate paste on the processes occurring during its production	D. Pavlov and G. Papazov
347-352	Potentiostatic pickling: a new technique for improving stainless steel processing	N. Azzerri and A. Tamba
353-360	The active dissolution of tin in acidic chloride electrolyte solutions — a rotating disc study	B. N. Stirrup and N. A. Hampson
361-364	A new method for the electrolysis of sodium chloride using a β-alumina-molten salt system	Yasuhiko Ito, Shiro Yoshizawa and Shuji Nakamatsu
365-370	Mathematical model and digital simulation of pulsating overpotential copper electrodeposition	K. I. Popov, D. N. Keča, S. I. Vidojković, B. J. Lazarević and V. B. Milojković
371-376	Investigation of Hydrophobic porous electrodes. I. Differential capacitance by a low frequency a.c. impedance technique	J. McHardy, J. M. Baris and P. Stonehart

Volume 6, Number 5 / September 1976

377-384	Catalytic and inhibitory effects of dissolved Cd²⁺ on C₃H₈ electro-oxidation	S. B. Brummer, M. J. Turner and H. Feng
385-396	Electrochemical concentrating and purifying from dilute copper solutions	R. S. Wenger and D. N. Bennion
397-401	The influence of ultrasonics on the electrodeposition of lead dioxide	K. C. Narasimham, P. S. Gomathi and H. V. K. Udupa
403-409	Application of a circulating suspended particle-electrode to electrochemical hydrodimerization of acrylonitrile	S. Yoshizawa, Z. Takehara, Z. Ogumi, M. Matsubara and T. Tsuji
411-415	A Cu(I) ion conductor obtained by replacement of Ag(I) in α-AgI	J. C. Bazán and J. A. Schmidt
417-423	Study of the effectiveness of fixed flow-through electrodes	F. Coeuret, D. Hutin and A. Gaunand
425-429	The mechanism of formation of a surface film of silver on a platinum electrode	K. I. Popov, D. N. Keča and G. R. Ostojić
431-444	Effects of charge rate and cycling on the morphology of Cd and Cd(OH)₂ in sintered plate electrodes	R. Barnard, G. S. Edwards, J. A. Lee and F. L. Tye
445-451	Hydrogen half-cells in molten salts. A potentiometric investigation of the systems (Pt or Au) H₂O/H₂, OH⁻ in fused alkali nitrates	E. Desimoni, F. Paniccia, L. Sabbatini and P. G. Zambonin
453-462	Electrolytic manganese metal from chloride electrolytes. II. Effect of additives	I. E. Lewis, P. H. Scaife and D. A. J. Swinkels
463-468	Materials balance in primary batteries. IV. Lithium batteries with organic electrolytes	N. Marinčić
469	Notices

Volume 6, Number 6 / November 1976

471-476	Natural convection mass transfer at horizontal screens	L. W. Shemilt and G. H. Sedahmed
477-483	On the electrochemical machining of some titanium alloys in bromide electrolytes	J. Bannard
485-505	Macrokinetics of processes in hydrogen-oxygen fuel cells and electrolysers	L. M. Pismen, Yu. M. Volfkovich and V. S. Bagotzky
507-514	Electrochemical behaviour of copper in a NaF-AlF₃-BaCl₂ ternary melt at 750° C	J. Chryssoulakis, J. Lepinay and M. J. Barbier
515-519	Degradation of liquid crystal devices under d.c. excitation and their electrochemistry	B. Gosse and J. P. Gosse
521-526	Electrochemical synthesis of tetraethyl lead and tetraethyl tin via ethyl zinc intermediates	G. Mengoli and S. Daolio
527-542	Electrochemical properties of aluminium alloys containing indium, gallium and thallium	A. R. Despić, D. M. Dražić, M. M. Purenović and N. Ciković
543-550	Effect of an industrial expander on the discharge process of a lead microelectrode in 4.5M sulphuric acid	A. Mehaute
551-557	An apparatus for rapid measurements in aqueous electrolytes at high temperatures and pressures	M. L. Brown and G. N. Walton
559-564	Comparative analysis of mass transfer at vibrating electrodes	A. M. Al Taweel and M. I. Ismail

Volume 7, Number 1 / January 1977

1-29	Electrochemical machining	J. Bannard
31-35	Oxide ion conduction in the sintered oxides of MoO₃-doped Bi₂O₃	T. Takahashi, T. Esaka and H. Iwahara
37-43	Solid-state ionics-solid electrolyte cells with copper ion conductors	T. Takahashi and O. Yamamoto
45-50	The electrodeposition of aluminium on brass from a molten aluminium chloride-sodium chloride bath	B. Nayak and M. M. Misra
51-55	Kinetics of hydrogen evolution reaction on a stainless steel electrode	P. Radhakrishnamurthy, S. Sathyanarayana and A. K. N. Reddy
57-64	Investigation of hydrophobic porous electrodes. II. Pseudocapacitance changes during underpotential copper deposition	J. McHardy
65-76	Interactions de la reduction du proton solvate et de l'oxygene dissous, sur une electrode de fer en solution sulfurique	A. Caprani and P. Morel
77-80	Formation of powdered copper deposits by constant and pulsating overpotential electrolysis	K. I. Popov, D. N. Keča and M. D. Maksimović
81-90	The effect of chloride ion in the electrowinning of copper	V. I. Lakshmanan, D. J. Mackinnon and J. M. Brannen
91-92	Pit propagation in aluminium under anodic polarization in aqueous chloride electrolyte	B. N. Stirrup and N. A. Hampson
93	Notices

Volume 7, Number 2 / March 1977

95-106	Structural, electrical and electrochemical characterization of Ni-Pr oxide thick films	C. Mari, V. Scolari, G. Fiori and S. Pizzini
107-112	Hydrodynamic effects on the efficiency of porous flow-through electrodes	B. G. Ateya, E. A. S. Arafat and S. A. Kafafi
113-117	Mechanism of action of selenious acid in the electrodeposition of manganese	P. Radhakrishnamurthy and A. K. N. Reddy
119-125	On the effect of some inorganic additives on the cycle life of the positive electrodes in the lead-acid cell	A. A. Abdul Azim and A. A. Ismail
127-133	The effect of thiourea, LIX65N and chloride ion on the morphology of electrowon copper	V. I. Lakshmanan, D. J. Mackinnon and J. M. Brannen
135-137	Axial dispersion in flow porous electrodes	R. E. Sioda
139-145	Anodic polymerization of methyl methacrylate in CH₃OH-H₂SO₄ solutions	A. Aurizi, V. Filippeschi and G. Pistoia
147-151	Electroanalysis of iron in molten slags	E. Franks
153-160	Electrolytes for methanol-air fuel cells. I. The performance of methanol electro-oxidation catalysts in sulphuric acid and phosphoric acid electrolytes	M. R. Andrew, B. D. McNicol, R. T. Short and J. S. Drury
161-174	Electrolytes for methanol-air fuel cells. 11. The electro-oxidation of methanol in trifluoromethane-sulphonic acid monohydrate and aqueous solutions of trifluoromethane-sulphonic acid	V. B. Hughes, B. D. McNicol, M. R. Andrew, R. B. Jones and R. T. Short
175-179	Continuous electrolytic reduction of a chalcopyrite slurry	T. Biegler and D. C. Constable
181-182	Photo-electrochemical energy conversion: electrocatalytic sulphur electrodes	G. Hodes, J. Manassen and D. Cahen
183	Angewandte Electrochemie — Grundlagen der electrolytischen Produktionverfahren	D. Pletcher
184	Notice

Volume 7, Number 3 / May 1977

185-188	The effect of the overpotential of deposition on the porosity of metal deposits	K. I. Popov, D. N. Keča and B. I. Vuksanović
189-195	The effect of a surface-active additive on the dissolution efficiency and surface finish in ECM	J. Bannard
197-209	On the role of the anions on the anomalous anodic dissolution of aluminium	M. Garreau and P. L. Bonora
211-214	The reason for the loss of activity of titanium anodes coated with a layer of RuO₂ and TiO₂	T. Loučka
215-223	On the accurate calibration of an electrochemical oxygen meter in the 10⁻⁷ bar range	C. M. Mari, S. Pizzini, T. A. Giorgi, L. Rosai and M. Borghi
225-233	Correlation entre les courbes courant-tension et la morphologie des dépôts électrolytiques d'étain	Ph. Aubrun, F. Wenger and R. Wiart
235-238	The effect of anodic bubble formation on cathodic mass transfer under natural convection conditions	S. Mohanta and T. Z. Fahidy
239-245	The redox mechanism of the chelate-catalysed oxygen cathode	F. Beck
247-252	On the influence of electrolyte concentration, pH and temperature on surface brightening of nickel under ECM conditions	M. Datta and D. Landolt
253-256	High-conductivity solid copper ion conductors: the sulphonium halide-copper(I) halide systems	T. Takahashi, N. Wakabayashi and O. Yamamoto
257-265	An investigation of the surface structure of some lead dioxide and related electrodes	P. Casson, N. A. Hampson, K. Peters and P. Whyatt
267-270	Effect of flow on the dissolution efficiency of mild steel during ECM	J. Bannard
271-273	The point of passivation of a zinc electrode in alkali	A. Marshall and N. A. Hampson
275	Notice

Volume 7, Number 4 / July 1977

277-286	Temperature distribution along the gap in electrochemical machining	W. G. Clark and J. A. McGeough
287-297	A thermodynamic estimation of the minimum concentration attainable in a flow-through porous electrode reactor	J. A. Trainham and J. Newman
299-302	Conduction in Bi₂O₃-based oxide ion conductors under low oxygen pressure. I. Current blackening of the Bi₂O₃-Y₂O₃ electrolyte	T. Takahashi, T. Esaka and H. Iwahara
303-308	Conduction in Bi₂O₃-based oxide ion conductor under low oxygen pressure. II. Determination of the partial electronic conductivity	T. Takahashi, T. Esaka and H. Iwahara
309-314	The continuous deposition of metal powders in a pump cell	R. E. W. Jansson and G. A. Ashworth
315-321	Electrode behaviour of insoluble suspensions of metal-free phthalocyanines in methylene chloride	R. O. Loutfy and J. H. Sharp
323-330	Electrolytic recovery of metals from waste waters with the ‘Swiss-roll’ cell	P. M. Robertson and N. Ibl
331-337	Formation of powdered copper deposits by square-wave pulsating overpotential	K. I. Popov, M. D. Maksimović, M. G. Pavlović and G. R. Ostojić
339-343	Potassium ion conduction in the β-alumina type compound K₂O·(5−x)Ga₂O₃·xFe₂O₃	K. Kuwabara and T. Takahashi
345-353	The anodic dissolution of lead in oxygenated and deoxygenated sulphuric acid solutions	R. D. Armstrong and K. L. Bladen
355-361	Electrochemical mass transfer in solutions containing drag-reducing polymers	G. H. Sedahmed, B. A. Abd-El-Nabey and A. Abdel-Khalik
363-365	Natural convection at planar and mesh electrodes in the ferro-ferricyanide system	A. A. Wragg
367	Book review	J. O'M Bockris

Volume 7, Number 5 / September 1977

369-378	Electrolytic studies on the system Ag/Ag₂O/AgO in alkaline chloride solutions	J. Turner
379-382	Photoelectrolysis	K. Nobe, G. L. Bauerle and M. Braun
383-393	Reduction electrocatalytique de l'oxygene sur electrodes solides d'oxydes mixtes contenant des ions manganese. I. Cas des manganites de cuivre Cu_xMn_3−xO₄ (0	H. Nguyen Cong, P. Chartier and J. Brenet
395-406	Reduction electrocatalytique de l'oxygene sur electrodes solides d'oxydes mixtes contenant des ions manganese. II. Rôle du couple Mn³⁺-Mn⁴⁺en sites octaédriques	H. Nguyen Cong, P. Chartier and J. Brenet
407-416	Electrochemical reduction of Pt(CN)₄²⁻ ions in molten sodium-potassium cyanide eutectic	E. Th. Kouwe and A. Gruenewaldt
417-425	Die Druckabhängigkeit der elektrischen Leitfähigkeit von pulverförmigen Oxiden im System Bleidioxid/Mennige	P. Herger
427-435	Calculation of local current densities and terminal voltage for a monopolar sandwich electrolyser: application to chlorate cells	I. Roušar, V. Cezner, J. Nejepsová, M. M. Jackšić and M. Spasojević, et al.
437-443	The production of hypobromite and of propylene oxide in an electrochemical pump cell	J. Ghoroghchian, R. E. W. Jansson and D. Jones
445-450	A study of semiconducting oxide-glass coatings on mild steel	A. S. W. Johnson and A. C. C. Tseung
451-459	Zinc deposit structures obtained from high purity synthetic and industrial acid sulphate electrolytes with and without antimony and glue additions	D. J. Mackinnon and J. M. Brannen
461	Notices

Volume 7, Number 6 / November 1977

463-471	Experimental study of copper deposition in a fluidized bed electrode	D. Hutin and F. Coeuret
473-484	Enhanced mass transfer in electrochemical cells using turbulence promoters	F. B. Leitz and L. Marinčić
485-494	Electrodissolution of nickel sulphide concentrates in ferrous chloride solutions	E. L. Ghali, B. Girard and D. V. Subrahmanyam
495-500	Borate buffer equilibria in nickel refining electrolytes	B. V. Tilak, A. S. Gendron and M. A. Mosoiu
501-504	The use of electrogenerated hypobromite for the phase transfer catalysed oxidation of benzyl alcohols	D. Pletcher and N. Tomov
505-510	Use of impedance measurements for the control of the dendritic growth of zinc electrodeposits	J. Bressan and R. Wiart
511-515	Effect of electrolyte composition on the properties of mercury electrochemical coulometers	J. Kotowski and Z. Koczorowski
517-530	Kinetics and mechanism for the hydrothermal decomposition of sodium amalgam promoted on graphite electrodes containing iron	R. L. Dotson and A. Jenkins
531-537	Ion implanted silicon-electrolyte interface	M. T. Pham and J. Hueller
539-544	Impedance measurement on Pb/H₂SO₄ batteries	M. Keddam, Z. Stoynov and H. Takenouti
545-548	Mass transport in a rotating parallel plate cell	A. R. Despić, M. N. Konjović and M. Mitrović
553	Notices

Volume 8, Number 1 / January 1978

1-4	Electrokinetic phenomena at the α-Al₂ O₃ mixture of polar liquids interface	S. Minc, J. Dabkowski and B. Kostrzewa
5-10	Hydrodynamic and mass transport phenomena in a multiple-electrode magnetoelectrolytic cell	S. Mohanta and T. Z. Fahidy
11-17	Materials balance in primary batteries. V. Scaling up of lithium inorganic batteries	N. Marinčić and F. Goebel
19-23	Electrodeposition of zinc on copper from alkaline zincate solutions	K. I. Popov, D. N. Keča and M. D. Andjelić
25-32	Anodic dissolution of galena concentrate in perchloric acid	J. W. Johnson, J. Chang, R. A. Narasagoudar and T. J. O'Keefe
33-39	Effect of some plating variables on the electrodeposition of Cu-Zn alloys from alkaline tartrate baths	S. S. Abd El Rehim and M. E. Ayashy
41-47	Electrodeposition of ternary nickel-iron-molybdenum alloys from an acetate bath	V. B. Singh and P. K. Tikoo
49-59	Non-linear electric analogues of the current distribution in porous electrodes	K. J. Euler and B. Seim
61-65	The effect of pulsating overpotential on the morphology of electrodeposited silver powder particles	M. G. Pavlović, M. D. Maksimović, K. I. Popov and M. B. Kršul
67-70	The potentiodynamic behaviour of nickel in potassium hydroxide solutions	R. S. Schrebler Guzmán, J. R. Vilche and A. J. Arvía
71-74	Electrodeposition of tin-cadmium alloys from a chloride-fluoride bath	R. D. Srivastava, D. Tripathi and A. K. Agarwal
75-79	A computer simulation of copper depostion by pulsating overpotential	K. I. Popov, M. D. Maksimović, R. R. Adžić, G. R. Ostojić and V. B. Milojković
81-85	Electrocatalysis on solid oxide electrolytes	C. John Wen and David M. Mason

Volume 8, Number 2 / March 1978

87-102	Mecanismes de la reduction electrochimique en milieu non aqueux de materiaux cathodiques utilises dans les piles au lithium	R. Messina, J. Perichon, M. Broussely and G. Gerbier
103-108	Electrochemical behaviour of pure iron in the aluminium refining electrolyte	J. Chryssoulakis, J. Bouteillon and J. C. Poignet
109-119	The effect of antimony, chloride ion, and glue on copper electrorefining	T. J. O'keefe and L. R. Hurst
121-134	The potentiodynamic behaviour of copper in NaOH solutions	A. M. Castro Luna De Medina, S. L. Marchiano and A. J. Arvía
135-143	Ruthenium dioxide-based film electrodes	G. Lodi, E. Sivieri, A. Battisti and S. Trasatti
145-160	Corrosion of nickel in sodium sulphate-sodium chloride melts. Part I	C. A. C. Sequeira and M. G. Hocking
161-164	Solid-state ionics: the phase diagram and high ionic conductivity of the system CuCl-TlCl	T. Takahashi, O. Yamamoto and A. Sawai
165-168	β-AgVO₃· 4AgI and AgNbO₃· 4AgI: two new solid silver electrolytes at room temperature	B. B. Scholtens, A. Brouwer and G. H. J. Broers
169-171	Electroreduction of cyanoacetic acid	V. Krishnan, K. Ragupathy and H. V. K. Udupa
173-175	Impedance measurements on platinum in sulphuric acid solutions	N. A. Hampson, M. J. Willars and B. D. McNicol
177	Notice

Volume 8, Number 3 / May 1978

179-193	Corrosion of nickel in sodium sulphate-sodium chloride melts. II. Potential-time and topochemical studies	C. A. C. Sequeira and M. G. Hocking
195-205	Characterization of reticulate, three — dimensional electrodes	A. Tentorio and U. Casolo-Ginelli
207-211	Studies in Kolbe electrosynthesis. I. Electrolysis of capric acid	V. G. Gurjar
213-222	Kinetics of growth of zinc dendrite precursors in zincate solutions	R. V. Moshtev and P. Zlatilova
223-234	The effect of glue, LIX65N and chloride ion on the morphology of electrowon copper	D. J. Mackinnon, V. I. Lakshmanan and J. M. Brannen
235-245	The effect of additives on the practical electrolytic separation of hydrogen and deuterium. II. Separation factor at Hg in aqueous and non-aqueous media	B. Dandapani and B. E. Conway
247-252	A comparative study of electrochemical and photoelectrochemical reactions at semiconducting oxidized Ti and TiO₂ single crystal electrodes in view of energy conversion applications	E. C. Dutoit, F. Cardon, F. Vanden Kerchove and W. P. Gomes
253-263	A mechanism for alkaline cell leakage	L. M. Baugh, J. A. Cook and J. A. Lee
265-267	Magnetoelectrolysis in non-uniform solenoidal fields	S. Mohanta and T. Z. Fahidy
269-272	I. A chronopotentiometric study of iron in LiCl-KCl	D. Inman, J. C. Legey and R. Spencer
273-276	II. A potentiometric study of alumina solubility and the influence of complexing by fluoride ions in LiCl-KCl	D. Inman, J. C. Legey and R. Spencer
277-279	The effect of anodic bubble formation on cathodic mass transfer under natural convection conditions	V. A. Ettel, A. S. Gendron, T. Z. Fahidy and S. Mohanta

Volume 8, Number 4 / July 1978

281-285	The rotating electrolyser. I. The velocity field	R. E. W. Jansson, R. J. Marshall and J. E. Rizzo
287-291	The rotating electrolyser. II. Transport properties and design equations	R. E. W. Jansson and R. J. Marshall
293-295	Electrochemical dissolution of mild steel by alternating current	M. J. Reuben and S. Venkatachalam
297-304	Criterion of completeness of electrolysis at flow porous electrodes	R. E. Sioda
305-311	Aspects of nickel-cadmium cells in single cycle applications. I. The effects of long term storage	B. S. Hobbs, T. Keily and A. G. Palmer
313-326	Dissolution of nickel (74%)-copper (4%)-sulphide matte anode in acidic chloride solutions	D. V. Subrahmanyam and E. L. Ghali
327-332	The preparation and behaviour of magnetite anodes	M. Hayes and A. T. Kuhn
333-345	Electro-oxidation of ammonia in waste water	L. Marinčić and F. B. Leitz
347-352	Analysis of the performance of packed-bed electrochemical reactors	Y. Volkman
353-359	Behaviour of metallic copper in the KNO₃-NaNO₃ eutectic mixture at 300° C	A. Fiegna
361-363	A microscopic examination of Ti-doped Fe₂O₃-glass coatings on mild steel	D. F. Nuttall, A. C. C. Tseung and M. Phillips
365-367	Application of SEM for monitoring morphological changes on the surface of secondary cell electrodes during cycling	I. Mohyla and J. Marek
369-371	Silver arsenate as the cathodic material in lithium batteries	B. Scrosati, B. Pietro and M. Lazzari
373	Notices

Volume 8, Number 5 / September 1978

375-390	The production of refractory metals by the electrolysis of molten salts; design factors and limitations	D. Inman and S. H. White
391-398	The rotating cylinder electrode	D. J. Matić, B. Lovreček and D. Skansi
399-404	Mass transfer enhancement by the counter-electrode gases in a new cell design involving a three-dimensional gauze electrode	G. H. Sedahmed
405-416	Mécanismes de la réduction electrochimique en milieu non aqueux de materiaux cathodiques utilisés dans les piles au lithium. II. Mécanisme de la réduction electrochimique du chromate d'argent dans le mélange carbonate de propylene-1,2-dimethoxyethane	R. Messina, J. Perichon, M. Broussely and G. Gerbier
417-425	Microstructural investigations on mixed RuO₂-TiO₂ coatings	W. A. Gerrard and B. C. H. Steele
427-436	A quantitative study of shape change in zinc secondary electrodes	S. -P. Poa and C. H. Wu
437-443	A multi-purpose microprocessor-based electrochemical apparatus	D. Gosden, M. Hayes, A. T. Kuhn and D. Whitehouse
445-454	Solid-state storage batteries	C. C. Liang, A. V. Joshi and N. E. Hamilton
455-465	Sur le choix d'un critère de determination de la vitesse de corrosion d'un acier au carbone dans une solution à 3% de chlorure de sodium aérée et agitée	M. Duprat, N. Bui and F. Dabosi
467-472	Concentration-time behaviour in a recirculating electrochemical reactor system using a dispersed plug-flow model	L. H. Mustoe and A. A. Wragg
473-478	Effect of drag-reducing additives on the rate of mass transfer in diffusion-controlled electrochemical processes	G. H. Sedahmed, B. A. Abd El Nabey and A. Abdel-Khalik
479-482	Orthogonal components of the impedance of batteries by a simple technique	S. Sathyanarayana, S. Venugopalan and M. L. Gopikanth

Volume 8, Number 6 / November 1978

483-490	Current density optimization in the copper electrorefining process	T. Dabroś and M. Jaskuła
491-501	The current distribution and shape change of zinc electrodes in secondary silver-zinc cells	S. -P. Poa and C. H. Wu
503-514	The comparison of galvanostatic and potentiostatic copper powder deposition on platinum and aluminium electrodes	K. I. Popov, M. G. Pavlović, M. D. Maksimović and S. S. Krstajić
515-522	Application of DSA-type electrodes to a positive grid in lead-acid batteries	M. Inai, C. Iwakura and H. Tamura
523-529	Electrochemical solar cell based on a sprayed CdS film photoanode	M. Tsuiki, H. Minoura, T. Nakamura and Y. Ueno
531-535	The mechanism of formation of a surface film of silver on a platinum electrode in galvanostatic deposition	K. I. Popov, M. G. Pavlović and M. D. Maksimović
537-544	Electrochemical reactions of halohydrins. I. Attempt at reductive coupling	D. Cipris
545-547	Electrochemical reactions of halohydrins. II. Olefins formation	D. Cipris
549-555	Energy efficiency in metal electrowinning	R. O. Loutfy and R. L. Leroy
557-562	Data acquisition system for electrochemical applications	U. v. Alpen, K. Graf and M. Hafendörfer
563-567	The differential capacitance of solid tantalum in some aqueous solutions	N. A. Hampson, J. Holloway and M. J. Jaycock
569-572	The effect of superimposed a.c. on d.c. on the electrodeposition of Cu-Zn alloys	S. S. Abd El Rehim

Volume 9, Number 1 / January 1979

1-6	The role of natural convection mass transfer in the kinetics of electropolishing of horizontal surfaces	G. H. Sedahmed, M. Z. El-abd, I. A. S. Mansour, A. M. Ahmed and A. A. Wragg
7-13	Electrodeposition of aluminium-copper alloys from alkyl benzene electrolytes	G. A. Capuano, R. Ducasse and W. G. Davenport
15-20	Packed-bed reactor with continuous recirculation of electrolyte	Dj. Matić
21-27	Voltage drop and current distribution using metal anodes in chlorine-caustic cells	L. E. Vaaler
29-35	A study of electrochemical kinetics of copper deposition under pulsed current conditions	C. C. Wan, H. Y. Cheh and H. B. Linford
37-41	Mass transfer behaviour of gas-evolving particulate-bed electrode	G. H. Sedahmed
43-53	Inhibited zinc electrodeposition: electrode kinetics and deposit morphology	J. Bressan and R. Wiart
55-70	The effect of lead on zinc deposit structures obtained from high purity synthetic and industrial acid sulphate electrolytes	D. J. Mackinnon, J. M. Brannen and R. C. Kerby
71-79	The effect of cadmium on zinc deposit structures obtained from high purity industrial acid sulphate electrolyte	D. J. Mackinnon, J. M. Brannen and R. C. Kerby
81-87	Electrochemical behaviour and solubility study of hydrogen and acetic acid in molten alkali acetates	R. Marassi, V. Bartocci, M. Gusteri and P. Cescon
89-100	Negative electrodes for nickel-cadmium accumulators: their properties as determined by impregnation procedure	J. Marek, I. Mohyla, J. Kos and M. Krček
101-108	Electrolysis in an annular flow cell with gas generation	T. Z. Fahidy
109-116	The electrochemical reduction of 2,5-dichlorobenzenesulphonyl chloride and the corresponding disulphide	D. Cipris and D. Pouli
117-123	Hydrogen peroxide production in trickle-bed electrochemical reactors	C. Oloman and A. P. Watkinson
125-139	Impedance parameters and the state-of charge. I. Nickel-cadmium battery	S. Sathyanarayana, S. Venugopalan and M. L. Gopikanth
141	Notices

Volume 9, Number 2 / March 1979

143-145	Hellmuth Fischer 1902–1976	H. Gerischer
147-153	Effect of codeposition of polymer on the morphology of electrodeposited copper	A. R. Despić, G. Savić Maglić and M. Jaćović
155-160	Steps and kinks on {211} iron surfaces and the kinetics of the iron electrode	W. Allgaier and K. E. Heusler
161-169	Influence of lead and thallium underpotential adsorbates at silver single crystal surfaces on different redox reactions	C. Mayer, K. Jüttner and W. J. Lorenz
171-181	The influence of Cl⁻on the passivity of Fe and Ni in acid organic solvents	K. Schwabe and M. Berthold
183-189	Non-equilibrium effects in the nickel hydroxide electrode	R. S. Schrebler Guzmán, J. R. Vilche and A. J. Arvía
191-199	Applying critical potential data to avoid stress corrosion cracking of metals	H. H. Uhlig
201-207	Electrochemical and eclipsometric study of iron corrosion inhibition in sodium sulphate solutions containing aliphatic acids	G. Mrowczynski and Z. Szklarska-Smialowska
209-217	Electrochemical investigations on the decomposition of solid compounds by applying an electrical potential difference	V. Lehmann and H. Rickert
219-232	On the electrodeposition of hard gold	H. Angerer and N. Ibl
233-242	Inhibition and nickel electrocrystallization	J. Amblard, I. Epelboin, M. Froment and G. Maurin
243-253	Investigation of hydrodynamic test systems for the selection of high flow rate resistant materials	E. Heitz, G. Kreysa and C. Loss
255-267	Principles of electrocatalysis and inhibition by electrosorbates and protective layers	J. W. Schultze and M. A. Habib

Volume 9, Number 3 / May 1979

269-283	Advances in water electrolysis technology with emphasis on use of the solid polymer electrolyte	P. W. T. Lu and S. Srinivasan
285-289	Electrodeposition of ternary nickel-iron-cadmium alloys	V. B. Singh
291-299	Potential distribution model for rechargeable sulphur electrodes in sodium-sulphur cells	M. W. Breiter and B. Dunn
301-305	Oxidation of polymethylated benzenes promoted by^.OH radicals	R. Tomat and A. Rigo
307-313	Experimental optimization of alkaline zinc-silver oxide primary cell with respect to the zinc electrode preparation and composition	S. P. Poa and S. J. Lee
315-320	Electrochemical formation of lithium iron(copper)silicide alloys	G. Eichinger
321-327	Electrochemical and chemical reactions involving non-equilibrium species at the nickel hydroxide electrode	R. S. Schrebler Guzmán, J. R. Vilche and A. J. Arvía
329-335	Mécanisme de la réduction electrochimique en milieu non aqueux de materiaux cathodiques utilisés dans les piles au lithium, III. Réduction électrochimique d'électrodes membranaires de sulfures et oxydes de cuivre dans le mélange carbonate de propylène-1,2-diméthoxyéthane	R. Fournie, R. Messina and J. Perichon
337-341	The electrochemical characteristics of a methanol stabilized electroless copper-plating solution	D. J. Lax and P. A. Maughan
343-349	Evaluation of factors affecting the radical electropolymerization of methylmethacrylate in the presence of HNO₃	G. Pistoia, O. Bagnarelli and M. Maiocco
351-359	Local study of wall to liquid mass transfer in fluidized and packed beds. I. Mass transfer in fluidized beds	D. Hutin and A. Storck
361-367	Local study of wall to liquid mass transfer in fluidized and packed beds. II. Mass transfer in packed beds	D. Hutin, A. Storck and F. Coeuret
369-379	Impedance parameters and the state-of-charge. II. Lead-acid battery	M. L. Gopikanth and S. Sathyanarayana
381-387	The formation of Planté cells using a nitrate process	W. H. Edwards and N. A. Hampson
389-393	The resistance of electrodeposited layers of rubber and resins	S. Guruswamy
395-398	Widerstand und Wassergehalt von Batteriebraunsteinen	K. -J. Euler
399-401	On the determination of oxygen potentials and O/M ratios in mixed U-Pu oxides by means of solid state galvanic cells	F. Toci, L. Manes, F. T. Ewart and C. M. Mari
403-406	Fundamentals of lead-acid cells. VIII. Potential step studies on the oxidation of porous lead electrodes in sulphuric acid	N. A. Hampson and J. B. Lakeman
407-410	Periodic reverse current electroplating and surface finishing	M. I. Ismail

Volume 9, Number 4 / July 1979

411-426	Electrocoating from molten salts	R. S. Sethi
427-435	Dispersion in electrochemical cells with radial flow between parallel electrodes. I. A dispersive plug flow mathematical model	M. Fleischmann and R. E. W. Jansson
437-444	Dispersion in electrochemical cells with radial flow between parallel electrodes. II. Experimental results for capillary gap cell and pump cell configurations	M. Fleischmann, J. Ghoroghchian and R. E. W. Jansson
445-455	Coloured coatings on aluminium produced by varying the duration of a.c. electrolysis treatment I. Thin coatings	K. Wada, T. Hatano and K. Uchida
457-464	Coloured coatings on aluminium produced by varying the duration of a.c. electrolysis treatment. II.Thick coatings	K. Wada, T. Hatano and K. Uchida
465-469	The effect of certain ions on the internal stress of bright copper electrodeposits	R. E. Gana, M. G. Figueroa and R. J. Larraín
471-473	The electrobrightening of copper in orthophosphoric acid	M. I. Ismail
475-481	The conversion of thermal energy into electrical energy using cells having a reversal of potential with temperature	J. Vedel, M. Soubeyrand and H. Quan
483-493	Anodic formation of thick polyoxyphenylene coatings onto Fe plates from phenol-ethylene diamine systems	G. Mengoli, S. Daolio, U. Giulio and C. Folonari
495-500	Pyrolytically coated carbon cloth electrodes	E. Sutzkover, C. Zur and M. Ariel
501-510	Aspects of nickel-cadmium cells in single cycle applications. II. Operational temperature effects	B. S. Hobbs, T. Keily and A. G. Palmer
511-515	Partially immersed gas-diffusion electrodes	A. Kaisheva, I. Iliev and S. Gamburzev
517-525	Nucleation phenomena in the electrodeposition of lead onto glassy carbon electrodes	F. Palmisano, E. Desimoni, L. Sabbatini and G. Torsi
527-531	The critical overpotential for copper dendrite formation	K. I. Popov, Lj. M. Djukić, M. G. Pavlović and M. D. Maksimović
533-536	The critical overpotential for zinc dendrite formation	K. I. Popov, M. G. Pavlović, M. D. Spasojević and V. M. Nakić

Volume 9, Number 5 / September 1979

537-543	The application of pulsed potential and pulsed current to a rotating disc electrode system	K. Viswanathan and H. Y. Cheh
545-554	Anodic electrochemistry of chalcopyrite	T. Biegler and D. A. Swift
555-562	The influence of PbO modification on the kinetics of the 4PbO·PbSO₄ lead-acid battery paste formation	V. Iliev and D. Pavlov
563-566	Mass transfer at rotating finned cylinders	G. H. Sedahmed, A. Abdel Khalik, A. M. Abdallah and M. M. Farahat
567-572	Mass transfer between rough surfaces and solutions containing drag-reducing polymers	G. H. Sedahmed, A. Abdel Khalik, A. M. Abdallah and M. M. Farahat
573-579	The zinc-chlorine battery: half-cell overpotential measurements	J. Jorné, J. T. Kim and D. Kralik
581-585	Impedance parameters and the state-of-charge. III. Zinc-manganese dioxide and magnesium-manganese dioxide dry batteries	M. L. Gopikanth and S. Sathyanarayana
587-593	Electrolytic deposition of lithium from non-aqueous solutions	T. Takei
595-601	The electrochemical production of cobaltic sulphate	Ch. Comninellis, E. Plattner and Ph. Javet
603-613	Zinc deposit structures obtained from synthetic zinc chloride electrolyte	D. J. Mackinnon, J. M. Brannen and V. I. Lakshmanan
615-621	Diffusion controlled inhibition of electrodeposition: impedance measurements	J. Bressan and R. Wiart
623-628	A. c. impedance studies on sodium β-alumina tubes for use in sodium-sulphur cells	R. D. Armstrong and D. P. Sellick
629-634	Distribution profiles of antimony as a function of depth in corrosion films on a Pb-Sb alloy	F. Arifuku, H. Yoneyama and H. Tamura
635-640	The distribution of antimony in the oxide layer formed by potentiostatic oxidation of Pb-Sb alloy	F. Arifuku, H. Yoneyama and H. Tamura
641-642	The i.r. analysis of water traces in electrolytes for Li/SOCl₂ cells	Y. Geronov, B. Puresheva, R. Moshtev and B. Iordanov
643-645	The electrochemical behaviour of a molten CF₃COOK-CF₃COONa eutectic	R. Dallenbach, O. John and P. Tissot
647-651	Oxygen and chlorine electrodes on semiconductive SnO₂ in molten LiCl-KCl eutectic	I. Uchida and S. Toshima
653-655	Anodic behaviour of gold in cyanide solution	T. P. Pan and C. C. Wan
657-659	The electroreduction of benzyl cyanide on iron and cobalt cathodes	V. Krishnan, A. Muthukumaran and H. V. K. Udupa
661	Energy efficiency in metal electrowinning	R. O. Loutfy and R. L. Leroy
662	Notices

Volume 9, Number 6 / November 1979

663-669	Voltage delay in lithium non-aqueous battery systems	A. Leef and A. Gilmour
671-676	Direct calculation of the sulphur electrode resistance in sodium-sulphur cells	M. W. Breiter and B. Dunn
677-684	Mécanismes de la réduction électrochimique en milieu non aqueux de materiaux cathodiques utilisés dans les piles au lithium. IV. Réduction d'électrodes membranaires d'hexacyanoferrates (II et III) d'argent dans le mélange carbonate de propylène-1,2-diméthoxyéthane	R. Messina, J. Perichon and M. Broussely
685-697	The electrochemical fluorination of octanoyl chloride	F. G. Drakesmith and D. A. Hughes
699-706	The electrodeposition of aluminium on mild steel from a molten aluminium chloride-sodium chloride bath	B. Nayak and M. M. Misra
707-713	The preparation of high surface area nickel oxide electrodes for synthesis	K. Manandhar and D. Pletcher
715-719	Electrochemical behaviour of manganese in the aluminium electrorefining bath	J. Chryssoulakis, J. Bouteillon and D. Inman
721-730	The electrodeposition of zinc from acidified zinc sulphate solution	I. W. Wark
731-736	Conversion of ethylene diamine dihydrochloride into ethylenediamine by electrodialytic water-splitting	Y. Chang
737-743	The anodic dissolution of copper in a fluidized bed electrode	J. Y. Bareau and F. Coeuret
745-751	The improvement of the characteristics of DSA — type positive grids in lead-acid batteries by surface treatment of the titanium base	M. Inai, C. Iwakura and H. Tamura
753-755	The oxidation of o-nitrotoluene to o-nitrobenzaldehyde with electrogenerated cobaltic sulphate	Ch. Comninellis, E. Plattner and Ph. Javet
757-763	New design of brine electrolyser with a membrane and a mercury cathode	E. Hermana, L. A. S. Infanzon, J. Cervello, M. Baile and E. D. Nogueira
765-775	The role of electrode structure and surface texture in the performance of gas evolving electrodes	A. T. Kuhn, J. Bin Yusof and P. Hogan
777-782	Current efficiency losses in indirect electrochemical processing	A. T. Kuhn and M. Birkett

Volume 10, Number 1 / January 1980

1	Editorial	Derek Pletcher
3-11	The impedance of electrical storage cells	N. A. Hampson, S. A. G. R. Karunathilaka and R. Leek
13-24	Design of electrochemical reactors via a sequential factorial costing technique	P. R. Nadebaum and T. Z. Fahidy
25-27	A simplified calculation procedure of concentration distribution in electrochemical systems	T. Z. Fahidy
29-36	Indirect electrolytic oxidation of some aromatic derivatives	K. Kramer, P. M. Robertson and N. Ibl
37-41	Electrolysis by intermittent potential	K. Viswanathan, H. Y. Cheh and G. L. Standart
43-47	Diffusion-controlled current distributions near cell entries and corners	A. A. Wragg, D. J. Tagg and M. A. Patrick
49-53	Proton diffusion in crystalline ruthenium dioxide	J. E. Weston and B. C. H. Steele
55-60	Scale-up studies of the electrolytic reduction of oxalic to glyoxylic acid	F. Goodridge, K. Lister, R. E. Plimley and K. Scott
61-70	The cause of residual capacity in nickel oxyhydroxide electrodes	R. Barnard, G. T. Crickmore, J. A. Lee and F. L. Tye
71-74	A high output power (70 V, 1.5 A) potentiostat-galvanostat	M. Froelicher, C. Gabrielli and J. P. Toque
75-80	Electrochemical silver microcoulometers with fluoroborate electrolyte	Z. Koczorowski and I. Zagórska
81-90	High oxygen ion conduction in sintered oxides of the Bi₂O₃-Er₂O₃ system	M. J. Verkerk, K. Keizer and A. J. Burggraaf
91-96	Fundamentals of lead-acid cells. IX. The effect of alloying with antimony on the electrochemical properties of solid lead	N. A. Hampson, S. Kelly and K. Peters
97-107	Anodic oxidation of N-anions. III. Anodic oxidation of the N-anions of diacylimides: A search for a new electrochemical synthesis of hydrazine	Z. Ali, R. Bauer, W. Schön and H. Wendt
109-125	Studies concerning charged nickel hydroxide electrodes I. Measurement of reversible potentials	R. Barnard, C. F. Randell and F. L. Tye
127-141	Studies concerning charged nickel hydroxide electrodes. II. Thermodynamic considerations of the reversible potentials	R. Barnard, C. F. Randell and F. L. Tye

Volume 10, Number 2 / March 1980

143-149	The characterization of three-dimensional electrodes using an electrochemical tracer method	I. N. Justinijanovic and M. Fleischmann
151-156	Electrical measurements in bipolar trickle reactors	M. Fleischmann and Z. Ibrisagić
157-168	Examination of flow models for bipolar trickle reactors	M. Fleischmann and Z. Ibrisagić
169-172	Performance of bipolar trickle reactors	M. Fleischmann and Z. Ibrisagić
173-178	Improvements to the marker pulse technique of characterizing electrochemical reactors	R. E. W. Jansson and J. Overstall
179-184	Electrocapillary elements. I. Electrocapillary acceleration meters with electrolyte, especially in a gel form	J. Kotowski, Z. Koczorowski and Z. Figaszewski
185-190	Electrocapillary elements. II. The choice of electrolyte composition for acceleration meters	Z. Figaszewski, E. Kucharska-Giziewicz, K. Lisowska, J. Kotowski and Z. Koczorowski
191-196	Electrocapillary elements. III. Properties and applications to variable pressure manometers	Z. Koczorowski, E. Kucharska-Giziewicz and Z. Figaszewski
197-202	Electrocapillary elements. IV. Constant pressure manometers with a frequency read out	Z. Figaszewski, Z. Koczorowski and J. Mrowczynski
203-211	Pressure effects on the performance and the e.m.f. of the Mg-AgCl seawater battery	M. Hiroi
213-222	The electrocatalytic oxidation of methanol in acid electrolyte: preparation and characterization of noble metal electrocatalysts supported on pre-treated carbon-fibre papers	P. A. Attwood, B. D. McNicol and R. T. Short
223-228	On the conductivity and void fraction of gas dispersions in electrolyte solutions	L. Sigrist, O. Dossenbach and N. Ibl
229-231	Thermogalvanic measurement of low partial pressures of oxygen with oxygen ion conductors: a disregarded possibility?	G. H. J. Broers, H. T. Cahen, A. Honders and J. H. W. Wit
233-237	Electrical leakage currents in bipolar cell stacks	A. T. Kuhn and J. S. Booth
239-244	Electrochemical investigation on the contact in solid state cells with an RbAg₄ I₅ electrolyte	G. Eichinger
245-250	A comparative study of the effect of different drag-reducing polymers on electrochemical mass transfer	G. H. Sedahmed and A. Abdel-Khalik
251-260	Thermal battery cells utilizing molten nitrates as the electrolyte and oxidizer	M. H. Miles and A. N. Fletcher
261-267	Fundamentals of lead-acid cells. X. The formation of PbO₂ on lead and antimonial lead	N. A. Hampson, S. Kelly and K. Peters
269-274	Absorption of hydrogen in reduced nickel oxide	W. Visscher and E. Barendrecht
275-283	A study of the Ag(s)/Ag₂ SO₄+Na₂ SO₄(l)1102 reference electrode	D. A. Shores and R. C. John
284	Errata

Volume 10, Number 3 / May 1980

285-290	Prospects for further industrial applications of organic electrosynthesis	M. M. Baizer
291-297	ß-Al₂O₃ synthesis from m-Al₂O₃	T. Takahashi and K. Kuwabara
299-308	The mechanism of copper powder formation in potentiostatic deposition	K. I. Popov, M. D. Maksimović, D. T. Lukić and M. G. Pavlović
309-313	Preparation and characterization of doped manganese dioxides	W. E. Mourad, M. W. Rophael and L. B. Khalil
315-319	Kinetics of the reduction of doped manganese dioxides by hydrazine	M. W. Rophael, W. E. Mourad and L. B. Khalil
321-334	The effects of chloride ion and organic extradants on electrowon zinc deposits	D. J. Mackinnon, J. M. Brannen and V. I. Lakshmanan
335-344	Anodic behaviour of lead sulphide in hydrochloric acid	E. Ghali and B. Dandapani
345-349	Photochemical properties of sintered iron (III) oxide	M. Gori, H. -R. Grüniger and G. Calzaferri
351-355	Mass transfer at vertical cylinders under forced convection induced by the counter electrode gases	G. H. Sedahmed
357-363	The impedance of the Ledanché cell. I. The treatment of experimental data and the behaviour of a typical undischarged cell	S. A. G. R. Karunathilaka, N. A. Hampson, R. Leek and T. J. Sinclair
365-377	The anodic formation and cathodic reduction of cuprous oxide films on copper in sodium hydroxide solutions	S. L. Marchiano, C. I. Elsner and A. J. Arvia
379-384	Charge storage in cells of the type gold/solid electrolyte/gold	J. M. Aceves and A. R. West
385-391	An experimental study of mass transfer to ring — disc jet electrode	H. Do Duc
393-404	An electrochemically regenerative hydrogen-chlorine energy storage system: electrode kinetics and cell performance	R. S. Yeo, J. McBreen, A. C. C. Tseung, S. Srinivasan and J. McElroy
405-408	Electrolysis of liquid hydrogen sulphide	T. D. Gregory, D. L. Feke, J. C. Angus, C. B. Brosilow and U. Landau
409-414	The thermoelectric power in Bi₂O₃	A. Honders and J. H. W. Wit
415-416	An electrochromic cell using a solid proton conductor	T. Takahashi, S. Tanase and O. Yamamoto
417-418	A simple voltage sensor and switch	M. Hayes

Volume 10, Number 4 / July 1980

419-425	A molten salt electrolytic process for recovering chlorine and ammonia from ammonium chloride. I	Y. Ito, T. Ohmori, S. Nakamatsu and S. Yoshizawa
427-432	A molten salt electrolytic process for recovering chlorine and ammonia from ammonium chloride. II	Y. Ito, T. Ohmori, T. Matsuki and S. Yoshizawa
433-439	Comportement électrocatalytique vis à vis de la réduction d'oxygène des oxydes mixtes A_xB_yMn_3−(x+y)O₄	H. Nguyen Cong and J. Brenet
441-448	Electronic conductivity of lead dioxide powder: separation of core and surface resistance of the particles	H. Braun, K. -J. Euler and P. Herger
449-457	Surface treatments of silicon to enhance thermal nucleation	R. G. Frieser and M. D. Reeber
459-471	The influence of amines on the anodic coupling of phenols to polyoxyphenylene films	G. Mengoli, S. Daolio and M. M. Musiani
473-479	A multi-electrode charge injector for selective metal deposition	Ch. Yarnitzky, M. Ariel and C. Zur
481-488	Retardation of electrolytic mass transport in collinear electric-magnetic fields	T. Z. Fahidy and T. S. Rutherford
489-494	Electrosynthesis of sulphones: coupled cathodic-anodic process	H. J. Wille, D. Knittel, B. Kastening and J. Mergel
495-504	Evaluation of zinc sulphate electrolytes containing certain impurities and additives by cyclic voltammetry	D. R. Fosnacht and T. J. O'Keefe
505-510	Substituted tertiary arsine and phosphines as interfacial adsorption inhibitors for corrosion of zinc in perchloric acid	H. B. Rudresh and S. M. Mayanna
511-525	The electrodeposition of lead dioxide on titanium	D. Gilroy and R. Stevens
527-533	An electrochemical sewage treatment process	M. Della Monica, A. Agostiano and A. Ceglie
535-541	Structure and corrosion resistance of electrolytic nickel coatings containing codeposited nonconducting particles	St. Rashkov and N. Atanassov
543-547	The role of mass transfer in the kinetics of anodic dissolution of gas-evolving metallic surfaces	G. H. Sedahmed, I. A. S. Mansour, A. A. Zatout and N. A. Abdel-Hay
549-552	Oxidation of cyclohexane to cyclohexanone via the electrochemical reduction of molecular oxygen: the HCl effect	R. Tomat and A. Rigo

Volume 10, Number 5 / September 1980

553-565	Electro-oxidation of benzene in a fixed bed reactor	C. Oloman
567-573	A study of the electrochemical reduction of nitrobenzene to p-aminophenol	J. Marquez and D. Pletcher
575-582	The electrochemical preparation of 3-bromothiophen	D. Pletcher and M. Razaq
583-586	Comparison of the phase transfer oxidation of benzyl alcohol in a pump cell and stirred-tank reactor	R. E. W. Jansson and N. R. Tomov
587-592	Inhibitive effects of isatin, thiosemicarbazide and isatin-3-(3-thiosemicarbazone) on the corrosion of aluminium alloys in nitric acid	D. D. N. Singh, M. M. Singh, R. S. Chaudhary and C. V. Agarwal
593-596	Electrochemical studies in a molten CF₃COOK-CF₃COONa eutectic at platinum, gold and pyrolytic graphite electrodes	O. John and P. Tissot
597-602	Morphological examination of the effect of antimony on the electrochemistry of lead	N. A. Hampson, S. Kelly, K. Peters and P. Whyatt
603-609	The impedance of the Leclanché cell. II. The impedance of the individual cell components	S. A. G. R. Karunathilaka, N. A. Hampson, R. Leek and T. J. Sinclair
611-621	The influence of temperature on the current peak multiplicity related to the nickel hydroxide electrode	H. Gómez Meier, J. R. Vilche and A. J. Arvia
623-626	Effect of pretreatment on the anodic behaviour of lead alloys for use in electrowinning operations. I	P. Ramachandran, K. Naganathan, K. Balakrishnan and R. Srinivasan
627-634	Effects of radial diffusion on the efficiency of porous flow-through electrodes	B. G. Ateya
635-647	The role of surface texture and anode-cathode size ratios on mass transfer in undivided electrochemical reactors	H. Hamzah and A. T. Kuhn
649-654	Influence of frequency of alternating current on the electrochemical dissolution of mild steel and nickel	S. Z. Fernandes, S. G. Mehendale and S. Venkatachalam
655-663	Mécanisme de la réduction électrochimique en milieu non aqueux de materiaux cathodiques utilises dans les piles au lithium. V. Utilisation des hexacyanoferrates de fer (II et III) comme materiaux cathodiques reversibles	R. Messina and J. Perichon
665-667	A constant-volume gas pump for gas electrodes	C. Contreras-Ortega, L. Silvester and P. A. Rock
669-675	Kinetics of coloration of anodic electrochromic films of WO₃·H₂O	C. Sunseri, F. Quarto and A. Paola
677-681	Free energy of formation of stabilized Bi₂O₃ (fcc) from e.m.f. measurements	M. J. Verkerk and A. J. Burggraaf
683-686	Morphology of sodium polysulphides formed electrolytically on graphite fibres in molten sulphur	L. Suski and J. Kolacz

Volume 10, Number 6 / November 1980

687-696	The fluidized bed electrode for the continuous recovery of metals	F. Coeuret
697-701	The anodic behaviour of copper-based alloys in phosphoric acid	A. Mance and A. Mihajlović
703-708	Influence of chemical composition and temperature on the passivation of some stainless steels and nickel-based alloys in sulphuric acid	K. Vu Quang, M. Traisnel, P. Damie and J. -C. Bavay
709-719	Electrodissolution de la millérite en milieu chlorhydrique	E. Ghali, A. Maruejouls and D. Deroo
721-727	Aspects of nickel-cadmium cells in single cycle applications. III. Effects of electrolyte additives on cadmium hydroxide crystal growth in sintered nickel negative electrodes during discharged storage	B. S. Hobbs, T. Keily and A. G. Palmer
729-740	Consideration of electrodes and electrolytes for electrochemical gasification of coal by anodic oxidation	R. W. Coughlin and M. Farooque
741-747	Perfluorosulphonic acid (Nafion) membrane as a separator for an advanced alkaline water electrolyser	R. S. Yeo, J. McBreen, G. Kissel, F. Kulesa and S. Srinivasan
749-755	Anodization of lead in sulphuric acid solutions containing antimony species	F. Arifuku, H. Yoneyama and H. Tamura
757-763	The Li/TiS₂ cell with LiSCN electrolyte	B. M. L. Rao, D. J. Eustace and J. A. Shropshire
765-774	Effect of nickel impurities on zinc electrodeposition	R. Fratesi, G. Roventi, M. Maja and N. Penazzi
775-784	Influence of charge and discharge of electric double layer in pulse plating	J. Cl. Puippe and N. Ibl
785-788	Mass transfer at the walls of a couette-type cell with small gaps in the laminar vortex regime	F. Coeuret and J. Legrand
789-797	Wetting properties of the sulphur electrolyte in sodium — sulphur batteries	G. J. Janz, R. M. Murphy and W. A. Spiak
799-806	The impedance of the Leclanché cell. III. The impedance of the cell at different stages of discharge and state-of-charge indication by the impedance method	S. A. G. R. Karunathilaka, N. A. Hampson, R. Leek and T. J. Sinclair
807-812	Correspondence	G. Hills, I. Montenegro, B. Scharifker, F. Palmisano and E. Desimoni, et al.
813	Notice

Volume 11, Number 1 / January 1981

1-6	A new model for the nucleation and growth of thick polycrystal films. I Calculation of volume transforms	S. Fletcher and D. B. Matthews
7-10	A new model for the nucleation and growth of thick polycrystal films. II Investigation of i-η-t responses	S. Fletcher and D. B. Matthews
11-21	Behaviour of lead electrodes in sulphate electrolytes. I. Effect of electrode preparation on discriminant curve cyclic voltammograms	S. Fletcher and D. B. Matthews
23-32	Behaviour of lead electrodes in sulphate electrolytes. II. Investigation of the electrode kinetics	S. Fletcher and D. B. Matthews
33-39	A new magnesium — air cell for long-life applications	S. Sathyanarayana and N. Munichandraiah
41-47	Wear of graphite anodes during electrolysis of add sulphate solutions	M. A. Rabah, A. A. Abdul Azim and A. Ismail
49-54	The role of impregnants in determining the behaviour of graphite anodes	M. A. Rabah, A. A. Abdul Azim and A. Ismail
55-59	Reduction of 2-nitropropane in an undivided, flooded, bipolar cell	M. Fleischmann, J. Ghoroghchian and R. E. W. Jansson
61-68	A new type of organic electrosynthesis reactor with a t wo-phase gas-electrolyte stream flowing through a mercury cathode. I. Application in electrochemical preparation of organotin compounds	A. Savall, G. Lacoste and P. Mazerolles
69-75	A new type of organic electrosynthesis reactor with a two-phase gas-electrolyte stream flowing through a mercury cathode, II. Limiting currents and mass-transfer studies in organotin electrosynthesis	A. Savall, J. Mahenc and G. Lacoste
77-82	Synthesis of potassium beta-alumina by thermal decomposition of a complex	T. Takahashi, K. Kuwabara and H. Ohyanagi
83-90	Measurement and regulation of oxygen content in selected gases using solid electrolyte cells. IV. Accurate preparation of CO₂-CO and H₂O-H₂ mixtures	A. Caneiro, M. Bonnat and J. Fouletier
91-102	Heat rejection and thermal efficiency in model hydrogen-halogen fuel cell systems	E. N. Balko
103-110	In situ evaluation of container corrosion in sodium — sulphur batteries	B. Dunn, M. W. Breiter and D. S. Park
111-116	Benzoic acid and substituted benzoic acids as interfacial corrosion inhibitors for copper in HClO₄	R. K. Dinnappa and S. M. Mayanna
117-127	Design of an ion-selective electrode analytical system for monitoring copper in electrochemical reactors	F. C. Walsh and D. R. Gabe
129-134	Effects of anode materials in the electroforming of iron-nickel alloy foil	S. H. F. Lai and J. A. McGeough

Volume 11, Number 2 / March 1981

135-142	Corrosion as a process determining the efficiency of porous nickel plates impregnated with nickel hydroxide	M. Paszkiewicz
143-144	The reasons for the loss of activity of titanium-ruthenium dioxide anodes in sulphuric acid media	T. Loucka
145-152	Transient analysis of a flow-through porous electrode at the limiting current	P. S. Fedkiw
153-163	Electrodissolution de la Heazlewoodite en milieu chlorhydrique	E. Ghali, C. Meric and D. Deroo
165-171	Correlation between structure and properties of cation-exchange membranes prepared by the paste method	M. Nishimura and Y. Mizutani
173-176	Electrolytic reduction of vanillin to vanillyl alcohol at amalgamated copper, lead and zinc electrodes	P. L. Sharma and J. N. Gaur
177-185	An electron microscope investigation of electrolytic copper powders	D. Russev
187-191	Study of Ti(III) solutions in various molten alkali chlorides. I. Chemical and electrochemical investigation	E. Chassaing, F. Basile and G. Lorthioir
193-196	Study of Ti(III) solutions in various molten alkali chlorides. II. Raman spectroscopy investigation	E. Chassaing, F. Basile and G. Lorthioir
197-203	Evaluation of TiO₂-glass composites as interconnector material for solid oxide electrolyte fuel cells	P. G. Russell, H. S. Isaacs, A. C. C. Tseung and S. Srinivasan
205-208	Electrochemical separation of phases in a copper alloy containing beryllium, nickel and zirconium	A. Mance and A. Mihajlović
209-215	An integrated electrochemical-chemical method for the extraction of O₂ from air	A. C. C. Tseung and S. M. Jasem
217-237	Cadmium in alkaline solution	R. Barnard
239-246	Dendritic electrocrystallization and the mechanism of powder formation in the potentiostatic electrodeposition of metals	K. I. Popov, M. D. Maksimović, J. D. Trnjančev and M. G. Pavlović
247-251	Electrochemical behaviour of lithium iodide monohydrate	R. D. Armstrong and K. Landles
253-259	Electrochemical machining as a method of preparing grained aluminium surfaces	J. E. Bannard, J. R. Duncan and G. Lewis
261-267	Formation of sorbitol by cathodic reduction of glucose	A. Bin Kassim, C. L. Rice and A. T. Kuhn
268	Notice

Volume 11, Number 3 / May 1981

269-271	The failure of porous lead dioxide electrodes (positives) to accept recharge during potential step experiments	S. Kelly, N. A. Hampson and K. Peters
273-279	Electrical properties of pyrolytic MnO₂ layers	J. M. Albella, L. Fernández-Navarrete and J. M. Martínez-Duart
281-285	Electrochemical reduction of rubber seed oil to stearic acid	L. M. V. Tillekeratne, N. M. R. U. R. Dharmawardene and S. Hettiarachchi
287-289	Electrodeposition of mercury from the HgNO₃-CH₃OH-H₂O system at low temperature	S. Tajima, S. Morisaki and S. Shimizu
291-297	Electrodeposition of tantalum and tantalum-chromium alloys	I. Ahmad, W. A. Spiak and G. J. Janz
299-303	Selective anodic dissolution of phases in copper-based alloys in citric acid solution	A. Mance and A. Mihajlović
305-312	Analogue storage cells based on a coulometer with solid electrolyte and stoichiometric variation of the storage phase. I. Cells with symmetric electrodes	N. Valverde
313-317	Analogue storage cells based on a coulometer with solid electrolyte and stoichiometric variation of the storage phase. II. Cells with small temperature variation and low overvoltage	N. Valverde
319-323	The mechanism of electrodeposition of acrylic resin on aluminium	Show -An Chen and Chin -Ling Liu
325-333	The breakdown of passive films on active metal anodes by halide ions in oxidizing molten salts	M. H. Miles
335-338	Electrolyte limitations in molten salt batteries	M. J. Willars, J. G. Smith and R. W. Glazebrook
339-346	Metal recovery using a moving-bed electrode	K. Scott
347-355	Recent developments in the technology of sulphur dioxide depolarized electrolysis	P. W. T. Lu, E. R. Garcia and R. L. Ammon
357-360	Oxidation states of lead in anodic oxide films formed in sulphuric acid solutions containing antimony (III) species	F. Arifuku, H. Yoneyama and H. Tamura
361-364	Fundamentals of lead-acid cells. XVI. Phase formation at porous lead electrodes at low temperatures	N. A. Hampson and J. B. Lakeman
365-372	The impedance of the alkaline zinc-manganese dioxide cell. I. Variation with state of charge	S. A. G. R. Karunathilaka, N. A. Hampson, R. Leek and T. J. Sinclair
373-386	Comportement électrochimique des variétés alpha et beta PbO₂ et influence de l'antimoine sur leur reactivité électrochimique en milieu H₂SO₄, 8N	H. Nguyen Cong, A. Ejjenne, J. Brenet and P. Faber
387-393	On the mechanism of electroless plating. I. Oxidation of formaldehyde at different electrode surfaces	J. E. A. M. Meerakker
395-400	On the mechanism of electroless plating. II. One mechanism for different reductants	J. E. A. M. Meerakker
401	Corrigendum	R. Barnard, C. F. Randell and F. L. Tye
402	Notice

Volume 11, Number 4 / July 1981

403-405	Electrogenerative oxidation of sulphur dioxide	R. M. Spotnitz, C. E. Loeffler and S. H. Langer
407-412	Analogue and microprocessor control of an electrochemical waste-acid treatment process	K. Chisholm, A. J. Morris, Y. Nazer and A. J. Wright
413-416	Electrical resistance of polybenzimidazole membranes	J. E. Kuder
417-422	Some aspects of the electrochemical response of iron hydroxide precipitated on different conducting substrates	V. A. Macagno, J. R. Vilche and A. J. Arvia
423-431	Use of multiple regression analysis to develop equations for predicting Li-Al/iron sulphide cell performance	E. C. Gay, W. E. Miller and F. J. Martino
433-442	Experimental problems in the use of solid oxide electrolytes	B. Heshmatpour and D. A. Stevenson
443-446	Impregnation of porous nickel plates by cathodic polarization	M. Paszkiewicz
447-452	Electrocatalytic oxidation of hydrocarbons on a stabilized-zirconia electrolyte employing gold or platinum electrodes	R. A. Goffe and D. M. Mason
453-461	Effects of ionic migration on the concentrations and mass transfer rate in the diffusion layer of dissolving metals	B. G. Ateya and H. W. Pickering
463-471	Electrodeposition of aluminium from a nonaqueous medium consisting of Al₂Br₆ and LiBr in ethylbenzene: The effects of additives	E. Peled, M. Elam and E. Gileadi
473-476	Anodic oxidation ofp-t-butyltoluene in sulphuric acid solution	P. Tissot, H. Do Duc and O. John
477-488	Tritium separation from light and heavy water by bipolar electrolysis	M. Petek, D. W. Ramey and R. D. Taylor
489-492	The electrochemical properties of imidazol-linked iron phthalocyanine—carbon electrodes	R. Larsson, L. Y. Johansson and L. Jönsson
493-502	The electrolytic oxidation of chromic sulphate to chromic acid: The effects of lead anode preparation	D. Pletcher and S. J. D. Tait
503-515	Optimization of an electrochemical hydrogen-chlorine energy storage system	K. L. Hsueh, D. -T. Chin, J. Mcbreen and S. Srinivasan
517-523	Studies concerning charged nickel hydroxide electrodes IV. Reversible potentials in LiOH, NaOH, RbOH and CsOH	R. Barnard, C. F. Randell and F. L. Tye
525-530	Postbreakdown reanodization of tantalum	J. M. Albella, I. Montero, M. Fernández and J. M. Martínez-Duart
531-535	Further studies on the epoxidation of propylene in a bipolar trickle bed	K. G. Ellis and R. E. W. Jansson
536	Notice

Volume 11, Number 5 / September 1981

537-542	Mass transfer characteristics of a novel gas-evolving electrochemical reactor	G. H. Sedahmed and L. W. Shemilt
543-549	Morphological characteristics of copper deposition on stainless steel cathodes	M. I. Ismail and T. Z. Fahidy
551-561	The voltammetric detection of intermediate electrochemical processes related to iron in alkaline aqueous solutions	R. S. Schrebler Guzman, J. R. Vilche and A. J. Arvia
563-571	Bromine chloride as a cathode component in lithium inorganic cells	C. C. Liang, P. W. Krehl and D. A. Danner
573-582	The impedance of the alkaline zinc-mercuric oxide cell. I. Cell behaviour and interpretation of impedance spectra	S. A. G. R. Karunathilaka, N. A. Hampson, T. P. Haas, R. Leek and T. J. Sinclair
583-587	A single-equation experimental model of electrode polarization	M. S. Quraishi and T. Z. Fahidy
589-594	Cupric oxalate-magnesium seawater cells	M. Hiroi
595-600	Electrochemical cycling of pasted antimonial lead electrodes (positives)	S. Kelly, N. A. Hampson and K. Peters
601-603	High current density organic electrosynthesis via metal powders in multiphase systems	D. Pletcher, M. Razaq and G. D. Smilgin
605-612	The perchlorate-assisted formation of lead dioxide on lead	C. Lazarides, N. A. Hampson and M. Henderson
613-623	Impedance measurements during the cycling of a zinc electrode	C. Cachet, U. Ströder and R. Wiart
625-637	A preliminary investigation of some anodes for use in fluidized-bed electrodeposition of metals	D. P. Ziegler, M. Dubrovksy and J. W. Evans
639-644	The use of graphite cloth electrodes for the recovery and separation of gold	C. Zur and M. Ariel
645-651	Electrochemical reduction of ZrCl₄ in molten NaCl, CsCl and KCl-LiCl and chemical reactions coupled to the electrodeposition of zirconium	F. Basile, E. Chassaing and G. Lorthioir
653-660	Photovoltages exceeding the band gap observed with WSe₂/I⁻ solar cells	M. Etman, H. Tributsch and E. Bucher
661-668	Détermination de la séquence de pondération d'une pile Leclanché a l'aide d'une méthode d'intercorrélation	A. Chabli, T. Diaco and J. P. Diard
669	Corrigendum	M. Nishimura and Y. Mizutani
670	Notice

Volume 11, Number 6 / November 1981

671-676	Effects of some thioureas on the dissolution of aluminium alloys in nitric acid	D. D. N. Singh, C. Chakrabarty, R. S. Chaudhary and C. V. Agarwal
677-683	The effect of additives on the morphology of zinc electrodeposited from a zinc chloride electrolyte at high current densities	B. K. Thomas and D. J. Fray
685-689	Interfacial behaviour of various liquid electrode/β″-alumina systems	M. W. Breiter and B. Dunn
691-695	On the relative Coulombic effectiveness and profitability of electrolysis via intermittent current	T. Z. Fahidy and M. S. E. Abdo
697-701	Electrodeposition of nickel-cobalt-zinc alloys from a borate bath	R. K. Shukla, S. K. Jha and S. C. Srivastava
703-713	Kinetics of the polycrystalline iron electrode in dilute acid and neutral aqueous electrolytes under complex fast potentiodynamic perturbations	J. O. Zerbino, J. R. Vilche and A. J. Arvía
715-721	The impedance of the alkaline zinc-manganese dioxide cell. II. An interpretation of the data	S. A. G. R. Karunathilaka, N. A. Hampson, R. Leek and T. J. Sinclair
723-725	Metal deposition in diaphmgmless fluidized-bed electrolytic cells	F. Goodridge, K. Lister and K. Scott
727-733	Mass transfer in agitated vessels: energetic aspects	A. Storck, J. F. Brodberger, D. Hutin and G. Valentin
735-741	Electrolytic deposition of copper-aluminium alloys and certain of their properties	J. Gala, E. Łagiewka and J. Barańska
743-750	The production of oxalic acid from CO₂ and H₂O	J. Fischer, Th. Lehmann and E. Heitz
751-763	Fundamentals of lead-acid cells. XVII. The a.c. impedance of lead dioxide formed in sulphuric acid on some lead alloys	N. A. Hampson, S. Kelly and K. Peters
765-769	A note on the impedance of reduced PbO₂ layers on some lead alloys in sulphuric acid	S. Kelly, N. A. Hampson and K. Peters
771-780	Evaluation of agitation within circuit board through — holes	R. Haak, C. Ogden and D. Tench
781-785	The passivity of ferritic (Fe-18% Cr) stainless steel in methanolic solutions	F. Bellucci, G. Faita, C. A. Farina and F. Olivani
787-796	Carbon supports for phosphoric acid fuel cell electrocatalysts: alternative materials and methods of evaluation	J. McBreen, H. Olender, S. Srinivasan and K. V. Kordesch
797	Notices

Volume 12, Number 1 / January 1982

1-5	The conductivity of aqueous zinc chloride solutions	B. K. Thomas and D. J. Fray
7-11	Effect of drag-reducing additives on the rate of mass transfer in a parallel-plate electrochemical flow reactor	G. H. Sedahmed, H. M. Asfour, M. M. Nassar and O. A. Fadali
13-19	The effect of temperature on the anodic oxidation of lead in 1 M sulphuric acid solutions	P. J. Mitchell, N. A. Hampson and J. Smith
21-31	Evaluation of organic additives as levelling agents for zinc electrowinning from chloride electrolytes	D. J. MacKinnon and J. M. Brannen
33-40	Primary Li/SOCl₂ cells. XII. Performance and safety of super-high-rate cells	A. N. Dey and N. Hamilton
41-51	Chemically regenerative redox fuel cells	D. -G. Oei
53-58	Diffusional kinetics of metalliding zinc into solid copper	A. Sclafani, V. Augugliaro, L. Rizzuti and S. Lucia
59-67	Application of the trickle tower to problems of pollution control. I. The scavenging of metal ions	S. Ehdaie, M. Fleischmann and R. E. W. Jansson
69-73	Application of the trickle tower to problems of pollution control. II. The direct and indirect oxidation of cyanide	E. A. El-Ghaoui, R. E. W. Jansson and C. Moreland
75-80	Application of the trickle tower to problems of pollution control. III. Heavy-metal cyanide solutions	E. A. El-Ghaoui and R. E. W. Jansson
81-85	The effect of reduction potential on charge/discharge reactions on porous lead-bismuth electrodes (positives)	S. Kelly, N. A. Hampson and K. Peters
87-100	A chemically regenerative redox fuel cell	J. T. Kummer and D. -G. Oei
101-108	On the manganese dioxide electrode. V. The evidence indicating the presence of two solid solutions in the range MnO₂-MnO_1·5 with γ-MnO₂ as one end member	W. C. Maskell, J. A. E. Shaw and F. L. Tye
109-114	The behaviour of MnO₂ in strongly acidic solutions	P. Ruetschi and R. Giovanoli
115-120	Non-metallic working electrodes for high temperature systems	I. Uchida, H. Urushibata and S. Toshima
121-126	Potentiodynamic response of the Ni(OH)₂/NiOOH redox couple at the inner layer of the complex interface	R. E. Carbonio, V. A. Macagno, M. C. Giordano, J. R. Vilche and A. J. Arvía
127-133	Oxide anodes in electro-organic oxidation. Oxidation of maleic addon tungsten oxide anodes	G. Filardo, F. Di Quarto, S. Gambino and G. Silvestri
134	Notices

Volume 12, Number 2 / March 1982

135-145	Electrochemical methods for the in situ regeneration of active surface area of aged fuel cell type electrodes	H. Olender, W. E. O'Grady, H. S. Isaacs, S. Srinivasan and A. C. C. Tseung
147-151	DDQ cathodes for seawater cells	M. Hiroi and N. Ichikawa
153-162	Anodic formation of thin CdS films. I. Kinetics and mechanisms under galvanostatic and potentiodynamic conditions	L. -S. R. Yeh, P. G. Hudson and A. Damjanovic
163-169	The approximate costing of electro-organic processes	R. E. W. Jansson
171-183	The breakdown of PbO₂-Ti anodes	D. Gilroy
185-191	Preparation and electrical conductivity of thin films of Rb₄Cu₁₆I₇Cl₁₃	K. Soga and K. Kuwabara
193-204	Electrocatalytic activation of ruthenium electrodes for the Cl₂ and O₂ evolution reactions by anodic/cathodic cycling	M. Vuković, H. Angerstein-Kozlowska and B. E. Conway
205-211	An approximate economic evaluation of three-dimensional chemically modified electrodes	D. A. Cox and R. E. W. Jansson
213-218	Solid electrolyte cell using the electrolyte of the CuCl-CuI-RbCl system	T. Takahashi, K. Kuwabara, M. Miura and M. Nakanishi
219-223	Theory and operation of a steady-state pH differential water electrolysis cell	O. Teschke
225-230	Charge-discharge characteristics of a lead oxide-zinc secondary battery system	M. S. E. Abdo and T. Z. Fahidy
231-234	Selective recovery of gold from spent gold sulphite solutions by electrodeposition on graphite cloth electrodes	C. Zur and M. Ariel
235-240	Oxide ion and electron mixed conduction in sintered oxides of the system Bi₂O₃-Pr₆O₁₁	T. Esaka, H. Iwahara and H. Kunieda
241-251	Optimal design of packed bed cells for high conversion	G. Kreysa and C. Reynvaan
252	Notices

Volume 12, Number 3 / May 1982

253-260	The electrochemical hypochlorination of allyl chloride in dilute HCl solution	Ch. Comninellis and E. Plattner
261-266	Proposed prediction method for the frictional pressure drop of bubble-filled electrolytes	H. Vogt
267-274	Application of volumetric electrodes to the recovery of silver in sulphuric acid solutions. I. Mass transfer and electrochemical rate	A. Ratel and G. Lacoste
275-280	Properties ofSrMO_3-δ(M=Fe, Co) as oxygen electrodes in alkaline solution	Y. Takeda, R. Kanno, T. Kondo, O. Yamamoto and H. Taguchi, et al.
281-290	Anodic reactions of Ni₃S₂, β-NiS and nickel matte	D. C. Price and W. G. Davenport
291-298	An electrochemical technique for the reduction of aromatic nitro compounds	M. Noel, P. N. Anantharaman and H. V. K. Udupa
299-309	Development of the Eco-Cascade- cell reactor	F. C. Walsh, N. A. Gardner and D. R. Gabe
311-315	Electrocapillary elements. V. Acceleration meters working in short-circuit output conditions	Zbigniew Figaszewski
317-321	Comparison of anodic dischargability of Li-B alloy with pure lithium in LiClO₄-propylene carbonate	S. D. James
323-328	Studies on the electrodeposition of nickel from a Wattss' bath in the presence of sodium naphthalene-2-sulphonate and acrylamide additives	B. Nayak and K. Karunakaran
329-334	Electrodeposition of copper on the copper (1 0 0) face in the presence of 2-mercaptoethanol	R. Lakshmana Sarma and S. Nageswar
335-341	The transient response of ZrO₂ oxygen sensors to step changes in gas composition	J. E. Anderson and Y. B. Graves
343-349	Anodic formation of thin CdS films. II. Dependence of the kinetics on S²⁻concentration	A. Damjanovic, L. -S. R. Yeh and P. G. Hudson
351-357	Batterie à combustible métal alcalin-oxydant à solvant organique	Ph. Touzain and B. Kapfer
359-367	Effect of growth parameters on the habit and morphology of silver crystals grown electrolytically in gels	M. T. George and V. K. Vaidyan
369-376	Electrodissolution of synthetic covellite in hydrochloric acid	E. Ghali, B. Dandapani and A. Lewenstam
377-378	Notices

Volume 12, Number 4 / July 1982

379-391	Prospects for applied bioelectrochemistry	G. T. Rogers
393-398	Concentration effects of hydrochloric acid on the anodic behaviour of lead sulphide	B. Dandapani and E. Ghali
399-404	The preparation and behaviour of Ti/Au/PbO₂ anodes	Ch. Comninellis and E. Plattner
405-410	Correlation between specific adsorption and corrosion inhibition. Adsorption of 1-butylpyridinium bromide	L. A. Avaca, E. R. González and A. Rúvolo Filho
411-416	The reaction occurring between gaseous CF₄ and oxides dissolved in different molten fluorides. Some practical aspects	C. E. Castellano and A. J. Calandra
417-423	Metal deposition in magnetoelectrolysis employing low frequency sine-pulse trains	A. Olivier and T. Z. Fahidy
425-434	Catalytic electrodes for the Redox Flow Cell energy storage device	C. Y. Yang
435-438	The electrodeposition of cobalt — molybdenum alloys	N. Krstajić, K. Popov, M. Spasojević and R. Atanasoski
439-447	Current-time behaviour for copper electrodeposition. I. Theoretical analysis based on a surface diffusion model	Y. Ogata, K. Yamakawa and S. Yoshizawa
449-461	Current-time behaviour for copper electrodeposition. II. Experimental examination of surface diffusion and direct incorporation models at hemispherical sites	Y. Ogata, K. Yamakawa and S. Yoshizawa
463-467	Mass transfer effects on ZrO₂ oxygen concentration cells exposed to non-equilibrium H₂-O₂ mixtures	J. E. Anderson and Y. B. Graves
469-478	The electrochemistry of partially discharged Planté electrodes	C. Lazarides and N. A. Hampson
479-485	Effect of drag reducing polymers on the rate of mass transfer in relation to their use as corrosion inhibitors in pipelines under turbulent flow conditions	G. H. Sedahmed, M. Nagy Soliman and N. S. El-Kholy
487-496	Alternating current impedance studies on oxide films in metal/oxide/electrolyte systems: a modified approach	R. Srinivasan and C. S. C. Bose

Volume 12, Number 5 / September 1982

497-500	Some investigations into the anode profile in the transition zone in an electrochemical hole sinking operation	V. K. Jain and P. C. Pandey
501-503	Fusibility study of the magnesium cell electrolyte containing MgCl₂, CaCl₂, NaCl and KCl	J. B. Belavadi, N. Rajagopalan, P. S. Desikan and U. Sen
505-515	Galvanostatic cycling of graphite intercalation electrodes with anions in aqueous acids	F. Beck, H. Krohn and W. Kaiser
517-523	The electrochemical behaviour of light-sensitive electrodes formed by coating a platinum mesh with a powdered semiconductor	R. S. Davidson and C. J. Willsher
525-531	Comparison of the critical conditions for initiation of dendritic growth and powder formation in potentiostatic and galvanostatic copper electrodeposition	K. I. Popov, M. G. Pavlović and M. D. Maksimović
533-535	Lithium ion conducting solids for ambient applications	R. D. Armstrong and K. Landles
537-543	The Faradaic impedance of the lithium-sulphur dioxide system. A kinetic interpretation	M. Hughes, S. A. G. R. Karunathilaka, N. A. Hampson and T. J. Sinclair
545-548	Decomposition voltage for the electrolysis of alumina at low temperatures	R. C. Dorward
549-555	Electrochemical carboxylation of organic substrates. Synthesis of carboxylic derivatives of acenaphthylene	S. Gambino, G. Filardo and G. Silvestri
557-565	Preparation electrolytique des alliages plomb-calcium	J. -P. Millet, H. Pham, G. Pourcelly and M. Rolin
567-573	Séparation électrolytique des métaux alcalinoterreux sous forme d'alliages avec d'autres métaux	A. Callet, J. -P. Esson, J. -P. Millet, H. Pham and G. Pourcelly, et al.
575-584	Etude du dégagement anodique de chlore sur anode de graphite en milieu de sels fondus halogénés	J. -P. Millet, H. Pham, G. Pourcelly and M. Rolin
585-590	Mesure du paramétre de dispersion d'une pile Leclanché a l'aide de sa séquence de pondération	A. Chabli, J. P. Diard and B. Gorrec
591-597	High temperature voltammetry on gold electrodes in halide melts	G. Stehle, J. J. Duruz and D. Landolt
599-605	Solid state Li/MnO₂ cells	M. Kanda, S. Yamada, T. Shirogami, Y. Sato and T. Takamura
607-612	Electrolytic synthesis and properties of potassium oxalatotungstate (V)	N. Baba and T. Yoshino
613-618	Surface charge and function of cellulose battery separators	B. Lovereček, B. Derniković and J. Čaja
619-626	Tensile properties and morphology of pyrophosphate copper deposits	C. Ogden, D. Tench and J. White
627-630	The behaviour of PbO₂ in concentrated sulphuric acid	J. A. Bialacki, N. A. Hampson and K. Peters

Volume 12, Number 6 / November 1982

631-644	Membrane cells for chlor-alkali electrolysis	D. Bergner
645-651	Steam concentration cell using a high temperature type proton conductive solid electrolyte	H. Uchida, N. Maeda and H. Iwahara
653-658	The electrolysis of Al₂S₃ in AlCl₃-MgCl₂-NaCl-KCl melts	N. Q. Minh, R. O. Loutfy and N. P. Yao
659-667	Electrolytic mass transport at a rotating outer cylinder electrode with developing axial flow in the annulus	Z. -H. Gu and T. Z. Fahidy
669-680	Studies of the kinetics of the lithium/aluminium electrode in molten LiCl-KCl by linear sweep voltammetry	Y. S. Fung, D. Inman and S. H. White
681-685	Rechargeable solid electrolyte cells with a copper ion conductor, Rb₄Cu₁₆I_7−δCl_13+δ, and a titanium disulphide cathode	R. Kanno, Y. Takeda, M. Imura and O. Yamamoto
687-691	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst. I. The anodic cyanation of naphthalene	S. R. Ellis, D. Pletcher, P. Gough and S. R. Korn
693-699	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst. II. Aromatic nuclear acyloxylation	S. R. Ellis, D. Pletcher, P. H. Gamlen and K. P. Healy
701-710	Etude physicochimique et electrochimique de la protection d'un acier au carbone par les monofluorophosphates. I. Influence d'un traitement de conversion chimique	J. J. Robin, J. Durand, L. Cot, A. Bonnel and M. Duprat, et al.
711-720	Etude physicochimique et electrochimique de la protection d'un acier au carbone par les monofluorophosphates. II. Influence de l'application d'une couche de peinture sur les surfaces pre-traitees	A. Bonnel, M. Duprat, F. Dabosi, J. Durand and L. Cot
721-734	Computerized design and evaluation of improved electrodes for lead-acid batteries	L. E. Vaaler, E. W. Brooman and H. A. Fuggiti
735-742	The effect of electrolytically formed gas bubbles on ionic mass transfer at a plane vertical electrode	C. I. Elsner and S. L. Marchiano
743-757	Anodic dissolution of n-type and p-type chalcopyrite	R. S. McMillan, D. J. MacKinnon and J. E. Dutrizac
758	Erratum

Volume 13, Number 1 / January 1983

1	Announcement
3-21	The rotating cylinder electrode: a review of development	D. R. Gabe and F. C. Walsh
23-26	Coproduction of sulphuric acid and hydrogen by sulphur-assisted water electrolysis process	Y. S. Shih and M. J. Jong
27-38	Studies concerning charged nickel hydroxide electrodes. VI. Voltammetric behaviour for pre-cycled electrodes	R. Barnard and C. F. Randell
39-53	Zinc electrowinning from aqueous chloride electrolytes	D. J. Mackinnon, J. M. Brannen and R. M. Morrison
55-67	Sulphur potential measurements with a two-phase sulphideoxide electrolyte	K. T. Jacob, M. Iwase and Y. Waseda
69-71	Scale-up of the deposit ion-threshold voltage in the electrodeposition of bright chromium	T. Z. Fahidy and M. S. E. Abdo
73-78	Electrochemical properties of graphite fibre/epoxy composite electrodes	L. Nacamulli and E. Gileadi
79-85	Self-stabilizing mount for impedance measurements of solid electrolytes-with special applications to beta-alumina ceramics	F. Harbach and W. Bansemir
87-88	The incremental ohmic resistance caused by bubbles adhering to an electrode	H. Vogt
89-95	Studies concerning charged nickel hydroxide electrodes. VII. Influence of alkali concentration on anodic peak positions	R. Barnard and C. F. Randell
97-101	Studies concerning charged nickel hydroxide electrodes. VIII. The relative potentials of the β-/γ -nickel oxy hydroxide reduction processes	R. Barnard and C. F. Randell
103-104	Morphology of PbSO₄ formed on solid Pb in concentrated sulphuric acid: a note pertaining to a recent paper	J. A. Bialacki, N. A. Hampson, K. Peters and A. K. Williams
105-110	Electroinitiated polymerization of methyl methacrylate in two phase media	B. Nayak and R. C. Bhakta
111-116	Effect of 2-mercaptoethanol on the electrodeposition of lead	C. Radha Krishnan and S. Nageswar
117-120	Electrochemical production of ceric sulphate in concentrated H₂SO₄	Ch. Comninellis and E. Plattner
121-131	Melting-crystallization properties of the sulphur electrolyte in sodium-sulphur batteries	G. J. Janz and D. J. Rogers
133	Notices

Volume 13, Number 2 / March 1983

135-145	A potentiodynamic study of anodic film formation on nickel in borate solutions	L. M. Gassa, J. R. Vilche and A. J. Arvía
147-155	The electrochemical formation of graphitebisulphate intercalation compounds	L. E. A. Berlouis and D. J. Schiffrin
157-167	A hybrid method through faradaic rectification and a.c. impedance measurements for the corrosion rate determination of metal/oxide/electrolyte systems. I. Theory	R. Srinivasan and C. S. C. Bose
169-172	The effect of arsenic on the hydrogen evolution reaction on titanium	P. Millenbach, M. Givon and A. Aladjem
173-176	Determination of equilibrium silver sulphate concentration in the system Cu-H₂SO₄-CuSO₄-H₂O-Ag₂SO₄-Ag as a function of composition	J. Hotloś and M. Jaskuła
177-182	Chemical and electrochemical oxidation of copper in dielectric millimeter waveguide tubes	D. J. Fineberg, R. Haynes, F. J. Jannett and W. E. Rapp
183-188	Dielectric loss of beta-alumina poly crystalline ceramics of low Na₂O content in 30–200 MHz band	B. Kostrzewa, J. Dabkowski, K. Jaszczyński and S. Minc
189-207	pH changes at near-electrode surfaces	A. T. Kuhn and C. Y. Chan
209-215	The effect of electrode material resistance on potential distribution in disc electrode cells	K. Scott
217-220	The impedance of the alkaline zinc—manganese dioxide cell. III. The identification of a state-of-charge test	M. Hughes, S. A. G. R. Karunathilaka, N. A. Hampson and T. J. Sinclair
221-233	The role of sintering time on reversibility of Ni(s)—NiO(s) electrodes for high temperature solid oxide electrolyte galvanic cells	D. Gozzi and P. L. Cignini
235-243	The electrochemical study of a chromium plating bath. I. Reactions leading to solution-free species	Jiang Lin-Cai and D. Pletcher
245-252	The electrochemical study of a chromium plating bath. II. Chromium metal and surface film formation	Jiang Lin-Cai and D. Pletcher
253-267	Mineralogical and electrochemical stability of the nickel-iron sulphides—pentlandite and violarite	M. R. Thornber
268	Notices

Volume 13, Number 3 / May 1983

269-275	Electrophoretic painting	G. E. F. Brewer
277-288	The electrodeposition of silicon in fluoride melts	R. Boen and J. Bouteillon
289-293	Mass transfer from cylinders rotating in Newtonian fluids and dilute polymer solutions	Y. Kawase and J. J. Ulbrecht
295-306	Anodic characteristics of amorphous ternary palladium-phosphorus alloys containing ruthenium, rhodium, iridium, or platinum in a hot concentrated sodium chloride solution	M. Hara, K. Hashimoto and T. Masumoto
307-315	High efficiency hypochlorite generation	P. M. Robertson, W. Gnehm and L. Ponto
317-323	Les monofluorophosphates de zinc et de potassium en tant qúinhibiteurs de la corrosion d'un acier au carbone en solution de NaCl a 3%	M. Duprat, A. Bonnel, F. Dabosi, J. Durand and L. Cot
325-335	Aspects of the deposition of nickel on iron powder in a fluidized bed	L. Cifuentes and A. J. Fletcher
337-340	Transition metal catalysts for porous carbon air-electrodes in neutral chloride electrolytes	D. M. Dražić, Z. V. Ledinski and S. K. Zečević
341-350	The operation of long-life anodes in amalgam cells	D. Bergner and S. Kotowski
351-354	A state-of-charge test for the Li-CuO cell	S. A. G. R. Karunathilaka, R. Leek, N. A. Hampson, M. Hughes and T. J. Sinclair
355-363	X-ray photoelectron spectra and electrochemical properties of imidazol-linked iron phthalocyanine carbon electrode systems	B. Folkesson, L. Y. Johansson, R. Larsson and B. Yom Tov
365-370	Galvanic cell-type humidity sensor using high temperature-type proton conductive solid electrolyte	H. Iwahara, H. Uchida and J. Kondo
371-376	Test cell simulating the operating conditions of water electrolysers for the evaluation of gas evolving electrocatalysts	O. Teschke, D. M. Soares and C. A. P. Evora
377-382	Polycrystalline In₂O₃ and In₂O₃/Y₂O₃ photoanodes	F. -T. Liou, C. Y. Yang, K. Hakim and S. N. Levine
383-393	Cyclic voltammetry of group VIII metals in cyanide melts	E. TH. Kouwe and D. J. Muller
395-400	Hysteresis effects with ZrO₂ oxygen sensors exposed to non-equilibrium oxygen-hydrocarbon mixtures	J. E. Anderson and Y. B. Graves
401	Erratum	M. Hughes, S. A. G. R. Karunatthilaka, N. A. Hampson and T. J. Sinclair
401	Erratum

Volume 13, Number 4 / July 1983

403-409	Electrochemical production of heterogeneous nickel catalysts for organic hydrogenations	G. Filardo, F. Rosa, G. Alfeo, S. Gambino and G. Silvestri
411-416	Reduction of chalcopyrite with copper (I)	I. D. Macleod and D. M. Muir
417-427	Effect of radial diffusion on the polarization at porous flow-through electrodes	B. G. Ateya
429-438	Nodulation of electrodeposited copper due to suspended particulate	T. N. Andersen, C. H. Pitt and L. S. Livingston
439-449	The technology of the Li/Cl₂ in SO₂Cl₂ cell system IV. high temperature performance, storability, and safety characteristics	R. M. Murphy and C. C. Liang
451-458	The technology of the Li/BrCl in SOCl₂ inorganic battery system: performance and self-discharge characteristics following long-term storage	P. W. Krehl and C. C. Liang
459-468	Corrosion of oxide-coated titanium (DSA) anodes in organic solvents (especially methanol)	L. D. Burke, J. F. Healy and O. J. Murphy
469-472	Decomposition of β-alumina in an oxygen potential gradient	K. T. Jacob
473-487	Water desalting by means of electrochemical parametric pumping	Y. Oren and A. Soffer
489-505	Water desalting by means of electrochemical parametric pumping. II. Separation properties of a multistage column	Y. Oren and A. Soffer
507-517	Effect of flow rate and constant operating current on the behaviour of a recirculating electrochemical reactor system	L. H. Mustoe and A. A. Wragg
519-529	Current mode operation: a technique for improving the reliability of zirconia oxygen probes in reducing atmospheres	W. E. Borbidge and P. T. Whelan
531-533	Robotic electroplating of gold on quaternary semiconductors	G. Beni and S. Hackwood
535-540	Electrogenemtion of Mn(III) in an undivided cell	J. H. Wagenknecht, J. P. Coleman, R. C. Hallcher, D. E. McMackins and T. E. Rogers, et al.
541-548	Electrochemical aspects of the codeposition of gold and copper with inert particles	C. Buelens, J. P. Celis and J. R. Roos
549-551	On the microstructure of teflon-bonded platinum—carbon electrodes	R. Holze and A. Maas

Volume 13, Number 5 / September 1983

553-563	Magnetoelectrolysis	T. Z. Fahidy
565-568	Coelectrodeposition of aluminium and cadmium from aqueous sulphate solutions	L. Laming, G. G. Perrault and J. Reby
569-575	Energy consumption of aluminium smelting cells containing solid wetted cathodes	R. C. Dorward
577-586	The prediction of the state-of-charge of some commercial primary cells	S. A. G. R. Karunathilaka, N. A. Hampson, M. Hughes, W. G. Marshall and R. Leek, et al.
587-591	Influence of SO₂ on the electrolytic domain of yttria stabilized zirconia	F. K. Moghadam and D. A. Stevenson
593-602	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst III. Characterisation of thin film contactor cells	M. Fleischmann, C. L. K. Tennakoon, H. A. Bampfield and P. J. Williams
603-610	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst IV. Electrosynthesis using thin film contactor cells	M. Fleischmann, C. L. K. Tennakoon, P. Gough, J. H. Steven and S. R. Korn
611-617	Concentration dependence of the morphology of electrodeposits and a criterion for the morphological change of copper electrodeposits	Y. Ogata, K. Yamakawa and S. Yoshizawa
619-622	Studies of phenolic resin-based microporous separator materials	L. Yankov, S. Philipova, I. Zlatanov and L. Ivanova
623-635	Corrosion and polarization characteristics of zinc in battery electrolyte analogues and the effect of amalgamation	L. M. Baugh, F. L. Tye and N. C. White
637-649	The economic evaluation of the electrochemical o-nitrotoluene/o,o-azoxytoluene reduction process	R. H. H. P. Jaeger, L. J. J. Janssen, J. G. Wijers and E. Barendrecht
651-656	Selectivity in the electrochemical epoxidation of propylene	K. G. Ellis and R. E. W. Jansson
657-661	The indirect electrochemical epoxldation of butenes and ethylene in a bipolar trickle tower	K. G. Ellis and R. E. W. Jansson
663-667	A new electrochemical technique for bleaching cellulose pulp	M. M. Nassar, O. A. Fadaly and G. H. Sedahmed
669-678	The impedance of the lithium-thionyl chloride primary cell	M. Hughes, S. A. G. R. Karunathilaka, N. A. Hampson and T. J. Sinclair
679-686	Electroplating of Fe-Ni alloys: a sulphate-amine bath	S. N. Srimathi and S. M. Mayanna
687	Notices

Volume 13, Number 6 / November 1983

689-692	A novel electrochemical method for visual detection of surface inclusions in metallic substrates	I. Rubinstein
693-703	A new lead acid cell concept for traction applications	A. Lindholm
705-707	Frictional pressure drop of pure and contaminated bubble-electrolyte dispersions in electrochemical reactors	H. Vogt
709-724	The rôle of diffusion on the performance of porous electrodes	K. Scott
725-730	Absorption of CO₂ by alkaline electrolyte and its effect on electrical discharge	Hsien-Wen Ko and Hsun-Kai Juang
731-733	Electroreductlon of cyclohexanone oxime	N. Ayyaswami and V. Krishnan
735-741	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst. V. The anodic chlorination of naphthalene	S. R. Ellis, D. Pletcher, W. N. Brooks and K. P. Healy
743-750	Photoelectrochemical reactions of FeS₂ (pyrite) with H₂O and reducing agents	W. Jaegermann and H. Tributsch
751-764	Studies concerning the growth of cadmium dendrites. I. Morphology in alkaline media	R. Barnard, G. S. Edwards, J. Holloway and F. L. Tye
765-773	Studies concerning the growth of cadmium dendrites. II. Morphology in acidic media	R. Barnard, G. S. Edwards, J. Holloway and F. L. Tye
775-782	The mechanism of spongy electrodeposits formation on inert substrate at low over potentials	K. I. Popov and N. V. Krstajić
783-794	An investigation of the deposition and reactions of sulphur on gold electrodes	I. C. Hamilton and R. Woods
795-802	Electrochemical saw using pulsating voltage	M. Datta and D. Landolt
803-806	The estimation of the charge transfer resistance by graphical analysis of inclined semicircular complex impedance diagrams	L. Lemaitre, M. Moors and A. P. Peteghem
807-812	Tungstate induced corrosion of some aluminium alloys in acidic chloride solution — An approach for controlling it with morpholine	R. S. Chaudhary, P. N. S. Yadav and C. V. Agarwal
813	Notices

Volume 14, Number 1 / January 1984

1-8	Electrochemical oxidation of toluene promoted by OH radicals	R. Tomat and A. Rigo
9-14	Dielectric characteristics of miniature aluminium electrolytic capacitors under stressed voltage conditions	J. M. Albella, C. Gómez-Aleixandre and J. M. Martinez-Duart
15-22	Distribution of reaction in a cell with gas-evolving electrodes. I. Magnesium/silver chloride seawater battery	R. E. W. Jansson and R. J. Marshall
23-37	A hybrid method through Faradaic rectification and a.c. impedance measurements for the corrosion rate determination of metal/oxide/electrolyte systems. II. Experimental results for anodized aluminium	C. S. C. Bose and R. Srinivasan
39-46	Thermal properties of sodium-sulphur cells	Reinhard Knödler
47-50	The impedance of the Li/SOCl₂, BrCl primary cell	M. Hughes, S. A. G. R. Karunathilaka and N. A. Hampson
51-62	Overall mass transfer between electrodes and normal impinging submerged multijets of electrolyte	J. Nanzer, A. Donizeau and F. Coeuret
63-74	Investigation of the surface oxidation of bornite by linear potential sweep voltammetry and X-ray photoelectron spectroscopy	A. N. Buckley, I. C. Hamilton and R. Woods
75-78	Inhibition of diffusion controlled corrosion in pipelines by drag reducing polymers under turbulent flow conditions	G. H. Sedahmed, H. A. Farag, M. S. E. Abdo and S. G. Tantawy
79-81	Electrical conductivity of praseodymia doped ceria	Y. Takasu, T. Sugino and Y. Matsuda
83-90	A profilometric study of levelling in electroplating	D. J. Tidke and N. Ramaswamy
91-95	Natural convection mass transfer at spheres	G. H. Sedahmed, I. A. S. Mansour, T. H. El-Sherify and A. Khalaf Hussein
96	Corrigendum	T. Z. Fahidy
97-106	Reactions at lead electrodes in 5 mol dm⁻³H₂SO₄ near the equilibrium potential	J. Garche, P. J. Mitchell and N. A. Hampson
107-115	Plasma-sprayed nickel cathode coatings for hydrogen evolution in alkaline electrolytes	D. E. Hall
116	Notices
117-122	Electrolyte absorption capacity of conducting carbon blacks used in Leclanché type batteries	J. Lahaye, M. J. Wetterwald and J. Messiet
123-130	Mass transfer characteristics of electrochemical reactors employing gas evolving mesh electrodes	G. H. Sedahmed and L. W. Shemilt
131-134	Lanthanum-molybdenum coating for hydrogen evolution on titanium	N. V. Krstajić, M. D. Spasojević and R. T. Atanasoski

Volume 14, Number 2 / March 1984

135-143	Model of the isotropic anode in the molten carbonate fuel cell	J. Jewulski and L. Suski
145-149	The effect of ferric ions on the behaviour of a nickelous hydroxide electrode	G. Młynarek, M. Paszkiewicz and A. Radniecka
151-164	Electrodissolution de la galène en milieu suifamique	E. Ghali, M. Toedtemeier and B. Dandapani
165-175	The mechanism of oxidation of copper in alkaline solutions	M. R. Gennero Chialvo, S. L. Marchiano and A. J. Arvía
177-186	Hypochlorite electro-generation. I. A parametric study of a parallel plate electrode cell	G. H. Kelsall
187-196	Studies concerning the growth of cadmium dendrites III. Theoretical treatment	R. Barnard, J. Holloway, C. F. Randell and F. L. Tye
197-208	Electrochemical conversion of 2,3-butanediol to 2-butanone in undivided flow cells: a paired synthesis	M. M. Baizer, T. Nonaka, K. Park, Y. Saito and K. Nobe
209-220	The paired electrochemical synthesis of sorbitol and gluconic acid in undivided flow cells. I	P. N. Pintauro, D. K. Johnson, K. Park, M. M. Baizer and K. Nobe
221-230	Electrolytic nickel—molybdenum—vanadium alloy coatings as a material with a decreased hydrogen overvoltage	J. Gala, A. Małachowski and G. Nawrat
231-240	Stability and transient response of an electrolytic reactor	Thomas Z. Fahidy
241-246	'Electrodes minces de CdO préparées par pulvérisation réactive (‘spray’) ou par oxydation de cadmium déposé par metallisation sous vide. I. Préparation des films de CdO	J. F. Koenig, A. Sehili, M. Hamdani and P. Chartier
247-255	Électrodes minces de CdO préparées par pulvérisation réactive (‘spray’) ou par oxydation de cadmium déposé par metallisation sous vide. II. Hydratation et réduction des films de CdO	M. Hamdani, J. F. Koenig and P. Chartier
257-263	Electrode kinetics of antimony in alkaline solutions	L. L. Wikstrom and Ken Nobe
265-266	The evolution of hydrogen on cobalt-molybdenum coating: polarization characteristics	M. Spasojević, N. Krstajić, P. Despotov, R. Atanasoski and K. Popov
267	Notices

Volume 14, Number 3 / May 1984

269-275	A parametric study of copper deposition in a fluidized bed electrode	M. Fleischmann and G. H. Kelsall
277-284	A feasibility study of mercury deposition in a lead fluidized bed electrode	M. Fleischmann and G. H. Kelsall
285-291	Studies of pyrrole black electrodes as possible battery positive electrodes	G. Mengoli, M. M. Musiani, M. Fleischmann and D. Pletcher
293-303	Evolution de l'impédance d'un générateur en fonction de son état de charge: application au système V₂O₅/LiClO₄+C.P./Li	R. Mauger, M. Elkordi, J. C. Pariaud, F. Dalard and D. Deroo
305-314	Effect of add and base additions on the corrosion behaviour of nickel in (Na,K)NO₃ melts	A. Baraka and R. M. S. Baraka
315-322	Hydrogen insertion (intercalation) and light induced proton exchange at TiO₂(B) -electrodes	G. Betz, H. Tributsch and R. Marchand
323-327	Electrochromic properties of the n-heptyl viologen-ferrocyanide system	A. Yasuda, H. Mori, Y. Takehana, A. Ohkoshi and N. Kamiya
329-340	Electrochemical characteristics of the lithium/carbon monofluoride battery and its component half-cells	James R. Sandifer and Mary R. Suchanski
341-347	Effective conductivities of an FeS positive in LiCl-KCl eutectic electrolyte at different states of charge	M. Hiroi and H. Shimotake
349-355	Transpassive dissolution of iron in sulphuric acid solution	R. S. Chaudhary and W. A. Schultze
357-366	Applications of porous flow through electrodes. II. Hydrogen evolution and metal ion removal at packed metal wool electrodes	B. G. Ateya, A. A. Ateya and M. E. El-Shakre
367-371	Applications of porous flow-through electrodes. III. Effect of gas evolution on the pore electrolyte resistance	B. G. Ateya and M. E. El-Shakre
373-377	Single and multi-layerbuilt solid electrolyte cells with a copper ion conductor	K. Kuwabara, H. Yoshizaki and K. Sugiyama
379-387	Electrochemical behaviour of the surface treated composite-electrolyte/electrode interface	S. P. S. Badwal
389-399	The influences of the electrolyte and the physical conditions on ozone production by the electrolysis of water	Jordanis C. G. Thanos, Heinz P. Fritz and Dietrich Wabner
400-401	Book reviews	D. Pletcher, M. Eddowes and N. A. Hampson
402	Calendar

Volume 14, Number 4 / July 1984

403-415	Electrocatalysis: present and future	Derek Pletcher
417-423	Effect of halides on the corrosion behaviour of nickel in molten (Na, K)NO₃	A. Baraka and R. M. S. Baraka
425-436	Some theoretical considerations on the design of a practical anode in an electrochemical reactor	Oscar Lanzi, Robert F. Savinell and Richard E. Horn
437-448	Impedance of a porous electrode with an axial gradient of concentration	Michel Keddam, Christiane Rakotomavo and Hisasi Takenouti
449-458	Solid state electro-oxidation processes on lead and lead alloys in the PbO₂/PbSO₄ regions	E. Hameenoja and N. A. Hampson
459-466	The effect of small additions of indium and thallium on the corrosion behaviour of aluminium in sea water	A. Mance, D. Cerović and A. Mihajlović
467-474	The effect of germanium on zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon and P. L. Fenn
475-480	Aluminium as anode in primary alkaline batteries. Influence of additives on the corrosion and anodic behaviour of 2S aluminium in alkaline citrate solution	K. B. Sarangapani, V. Balaramachandran, V. Kapali, S. Venkatakrishna Iyer and M. G. Potdar, et al.
481-488	Oxygen reaction on titanium catalysed by gold, platinum and palladium	R. Zejnilović, M. Pješčić, M. Šljukić and A. R. Despić
489-494	Electrodeposition of copper on copper in the presence of dithiothreitol	Y. N. Sadana and S. Nageswar
495-504	Photoelectrochemical response of TiO₂ pigmented membranes	J. Li, L. M. Peter and R. Potter
505-510	Electrodeposition of lead alloys from fluoborate baths	R. Fratesi, G. Roventi, M. Maja and N. Penazzi
511-520	A study of transport of hydroxyl ion in a chlor-alkali diaphragm	R. R. Chandran, D. -T. Chin and K. Viswanathan
521-531	Concentration, mobility and thermodynamic behaviour of the quasi-free electrons in lead dioxide	Jürgen P. Pohl and Gerd L. Schlechtriemen
533-536	Preparation of dihydroxyviolanthrone with electrogenerated Mn⁺³	Ch. Comninellis and E. Plattner
537-545	Diphosphate coatings for protection of galvanized steel: quality control by impedance measurements	A. Jardy, R. Rosset and R. Wiart
547-549	The use of a clock reaction to measure the porosity of coatings on iron	Thomas C. Franklin and Barry C. Mirtsching
550-553	The determination of urea and carbamate herbicides using a wall jet electrode	W. John Albery, Bernard Fleet and Ana M. Oliveira Brett
554-556	A preliminary investigation of the electrodeposition of iron from partially neutralized simulated spent pickle liquor	D. J. Pickett and D. J. Howes
557-559	Behaviour of oximes at a nickel black cathode	N. Ayyaswami and V. Krishnan
560	Corrigendum

Volume 14, Number 5 / September 1984

545-553	Influence of carbon black properties on the behaviour of the cathode of a Leclanché-type battery	J. Lahaye, M. J. Wetterwald and J. Messiet
554	Announcement
555-564	Enhanced mass transfer at the rotating cylinder electrode. I. Characterization of a smooth cylinder and roughness development in solutions of constant concentration	D. R. Gabe and F. C. Walsh
565-572	Enhanced mass transfer at the rotating cylinder electrode. II. Development of roughness for solutions of decreasing concentration	D. R. Gabe and F. C. Walsh
573-585	Electrochemical etching of titanium alloy castings	J. C. Griess, S. A. David and R. J. Gray
587-594	Electroplating of cadmium from acidic bromide baths	A. M. Abd El-Halim
595-604	A flow-by packed-bed electrode for removal of metal ions from waste waters	Daniel Simonsson
605-613	The electrodeposition of copper-silver and copper-nickel alloy powders from aqueous ammoniacal solutions	A. T. Kuhn, P. Neufeld and K. Young
615-621	A particulate vortex bed cell for electrowinning: operational modes and current efficiency	V. D. Stanković and A. A. Wragg
623-626	Intermittent turbulence and period doubling at the corrosion-passivity transition in iron	G. Beni and S. Hackwood
627-638	Distribution of local mass transfer coefficients over one electrode bombarded by submerged multijets of electrolyte	J. O. Nanzer and F. Coeuret
639-643	Use of ion exchange membranes in preparative organic electrochemistry. L Anodic methoxylation of some olefins	E. Raoult, J. Sarrazin and A. Tallec
645-652	The potentiodynamic response of polycrystalline nickel electrodes in 0.5mK₂CO₃	A. E. Bohé, J. R. Vilche and A. J. Arvía
653-661	Primary current distribution in a two-dimensional model cell composed of an electrode with an open part	Yoshinori Nishiki, Koichi Aoki, Koichi Tokuda and Hiroaki Matsuda
663-674	Influence of current distribution on electrode potentials in bipolar water electrolysis cells of the ‘sandwich’ type	J. Divisek
675-678	Mass transfer to a rotating horizontal cylinder electrode with full and partial immersion	A. Meštrović-Markovinović and Dj. Matić

Volume 14, Number 6 / November 1984

679-686	Hydrous oxide formation on gold in base under potential cycling conditions	Laurence D. Burke and Gemma P. Hopkins
687-692	Ionic conduction in solid solution of the system La₂O₃-CaF₂	H. Iwahara, T. Esaka and T. Takahashi
693-700	Effect of anodically evolved gas bubbles on the rate of cathodic mass transfer in a vertical cylinder cell	G. H. Sedahmed
701-707	The effect of tin on zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon and P. L. Fenn
709-713	Anin situ method for determination of internal resistances in fuel cells	P. W. T. Lu
715-719	Electrodissolution de la galène en présence d'une induction magnétique inhomogéne	C. Nicollin, E. Ghali and B. Dandapani
721-729	Electrochemical reactivity of aromatic compounds for use in Li cells	Shin-Ichi Tobishima, Jun-Ichi Yamaki and Akihiko Yamaji
731-739	Reduction of Zr (IV) in (KCl/NaCl) eutectic (50/50 mol%) containing KF/ZrCl₄ in molar ratios of 6/1 or 4/1 at 750° C. Characterization of the dissolved species by IR spectroscopy	F. Basile, E. Chassaing and G. Lorthioir
741-748	Anodic substitutions in emulsions under phase transfer catalysis conditions. I. Cyanation of dimethoxybenzenes	Eliane Laurent, Govind Rauniyar and Marc Thomalla
749-754	A quantitative assessment of bubble-curtain effects upon interelectrode resistance of a conductimetric cell	S. Kisdnasamy and P. S. Neelakantaswamy
755-757	Effective conductivities of a negative electrode in an Li-Al/FeS cell at different states of charge	M. Hiroi and H. Shimotake
759-763	A solid state lithium concentration cell with Li_xV₂O₅	Katsumi Kuwabara, Motoki Itoh and Kohzo Sugiyama
765-768	The temperature dependence of the electrochemistry of the lithium-sulphur dioxide system	N. F. Harman, N. A. Hampson, S. A. G. R. Karunathilaka and D. Eyre
769-777	The behaviour of a two-compartment stirred-tank electrochemical reactor with two anodic reactions and with continuous flows of both anolyte and catholyte	D. J. Pickett and S. J. Sudall
779-790	Preliminary examination of an electrochemical process for converting olefins to ketones	Hugh H. Horowitz
791-796	The electrolytic reduction of carbon dioxide and monoxide for the production of carboxylic acids	F. Goodridge and G. Presland
797-801	The effect of additives on the electrodeposition of copper studied by the impedance technique	G. Fabricius and G. Sundholm
803-806	Surface resistivity of different silylated glasses	F. Deyhimi and J. -L. Munoz

Volume 15, Number 1 / January 1985

1-22	Materials aspects of photoelectrochemical energy conversion	K. Rajeshwar
23-27	Influence of variables in nickel-manganese-zinc alloy plating from a sulphate bath	R. Kashyap, S. N. Srivastava and S. C. Srivastava
29-38	Oxygen evolution on NiCo₂O₄ electrodes	J. G. D. Haenen, W. Visscher and E. Barendrecht
39-52	The effect of the expander upon the two types of negative active mass structure in lead-acid batteries	V. Iliev and D. Pavlov
53-62	The electrosorption of phenol onto activated carbon	Joseph McGuire, Carlton F. Dwiggins and Peter S. Fedkiw
63-70	Activation of hydrochloric acid-CrCl₃ · 6H₂ solutions with N-alkyfamines	D. Sh. Cheng, A. Reiner and E. Hollax
71-76	Influence of tartaric acid on the electrodeposition of silver from aqueous AgNO₃ solutions	G. Papanastasiou, D. Jannakoudakis, J. Amblard and M. Froment
77-84	Effect of method of preparation of FePc oxygen reduction catalyst on the activity of practical air electrodes	Toshiro Hirai, Jun -Ichi Yamaki and Akihiko Yamaji
85-91	Use of ion exchange membranes in preparative organic electrochemistry. II. Anodic dimethoxylation of furan	E. Raoult, J. Sarrazin and A. Tallec
93-97	Polarization at Pt electrodes of a fuel cell with a high temperature-type proton conductive solid electrolyte	H. Uchida, S. Tanaka and H. Iwahara
99-105	Potentiostatic step experiments on pasted Pb-Sb and Pb-Sn-Ca electrodes	J. A. Bialacki, N. A. Hampson and F. Wilson
107-112	Electrodeposition of cobalt-nickel alloys from Watts-type baths	S. S. Abd El-Rehim, A. M. Abd El-Halim and M. M. Osman
113-119	Studies of the discharge mechanisms in electrochemical arc machining	I. M. Crichton and J. A. McGeough
121-127	Anodic substitution in emulsions under phase transfer catalysis conditions. II. Acetoxylation of dimethoxybenzenes	Eliane Laurent, Govind Rauniyar and Marc Thomalla
129-137	The impedance of 23 Ah Ni-Cd cells with sintered electrodes: measurements in the range 10 kHz-0.001 Hz as an indication of residual capacity	M. Hughes, R. T. Barton, S. A. G. R. Karunathilaka, N. A. Hampson and R. Leek
139-144	Response behaviour of oxygen sensing solid electrolytes	A. J. A. Winnubst, A. H. A. Scharenborg and A. J. Burggraaf
145-150	Electrochemical synthesis of pyrido[1,2-a]pyrimidine derivatives. II. Electrochemical reduction of 2,6-dimethyl-3-ethyl-4-oxo-4H-pyrido[1,2-a]pyrimidine in aqueous media	E. Szebényi-Győry, V. Kovács-Mindler, I. Hermecz, B. Podányi and J. Brlik
151-154	The morphology of cadmium deposits obtained on foreign substrates at high overpotentials	K. I. Popov, N. V. Krstajić and S. R. Popov
154-155	Scanning electron microscopic study of some nickel electroplates	K. Karunakaran and B. Nayak
156	Book reviews	L. M. Peter
157-158	Calendar

Volume 15, Number 2 / March 1985

159-166	Positive polyacetylene electrodes in aqueous electrolytes	K. H. Dietz and F. Beck
167-173	Electrochemical oxidation of aliphatic hydrocarbons promoted by inorganic radicals. I. OH radicals	Renato Tomat and Adelio Rigo
175-179	Performance criteria and nomenclature in electrochemical engineering	G. Kreysa
181-190	Mass transfer at the electrodes of the ‘falling-film cell’	F. Coeuret and J. Legrand
191-200	Design characteristics of an aluminium-air battery with consumable wedge anodes	A. R. Despić
201-207	Copper(II) formate cathodes for seawater batteries	M. Hiroi
209-215	Electrode heat balances of electrochemical cells: application to NaCl electrolysis	Yasuhiko Ito, Ryuichi Takeda, Shiro Yoshizawa and Yukio Ogata
217-223	Electrodeposition of catalytically active nickel-thallium alloy powders from sulphate baths	A. M. Abd El-Halim and R. M. Khalil
225-229	Oxygen depolarized electrolysis of sodium chloride by the use of a β-alumina-molten salt system	Hidetaka Hayashi, Shiro Yoshizawa and Yasuhiko Ito
231-235	Permeation of vanadium cations through anionic and cationic membranes	Djong-Gie Oei
237-249	The film model for determining the effect of ionic migration in electrochemical systems	J. M. Hornut, G. Valentin and A. Storck
251-257	Faradaic impedance measurements of small magnitudes encountered in high capacity electrical storage cells	S. A. G. R. Karunathilaka, R. Barton, M. Hughes and N. A. Hampson
259-265	Electrochemical reduction of niobium ions in molten LiF-NaF	Qiao Zhiyu and Taxil Pierre
267-278	Etude du mécanisme réactionnel de réduction électrolytique de l'aluminium dans le mélange NaCl-KCl-LiCl-LiF fondu à 450° C	Yannis Chryssoulakis and Sofia Kalogeropoulou
279-284	Electroreduction of nitric oxide to ammonia at chemically modified electrodes	Kotaro Ogura and Shinji Yamasaki
285-292	Anodic oxidation of aniline for waste water treatment	D. W. Kirk, H. Sharifian and F. R. Foulkes
293-306	Determination of state-of-discharge of zinc-silver oxide button cells. I. Galvanostatic measurements	Jean-Paul Randin
307-311	Méthode simple de résolution des équations intégrais décrivant les courbes de la voltampérométrie cyclique ou triangulaire	Yannis Chryssoulakis, Maria Iatrelli, Sofia Kalogeropoulou and Athina Alexopoulou
313-315	Book reviews	D. Pletcher, A. A. Wragg and H. Gerault

Volume 15, Number 3 / May 1985

317-324	Lithium cycling efficiency and conductivity for γ-lactone-based electrolytes	Shin-Ichi Tobishima and Takeshi Okada
325-334	Analysis of the principal component of external casing corrosion in deep wells	Leendert Witte
335-349	Mechanistic study of C1₂ evolution at Ti-supported Co₃O₄ anodes	R. Boggio, A. Carugati, G. Lodi and S. Trasatti
351-363	Studies on chemically precipitated Mn(IV) oxides. IV. Effect of dopants/impurities on the discharge behaviour of chemical manganese dioxide in alkaline medium and the applicability of Atlung-Jacobsen model to the (MnO₂)_1-r(MnOOH)_r system	Julio B. Fernandes, Buqui D. Desai and V. N. Kamat Dalal
365-377	Determination of state-of-discharge of zinc-silver oxide button cells. II. Impedance measurements	Jean-Paul Randin
379-386	Sodium activity determinations in molten 99.5% aluminium using solid electrolytes	P. C. Yao and D. J. Fray
387-392	e.m.f. and impedance of Na-S cells and sodium poly sulphides during freeze-thaw cycles	Reinhard Knödler and Werner Bansemir
393-398	Electrochemical deposition of aluminium on tungsten in cryolite based melts	J. J. Duruz and D. Landolt
399-404	Impedance of the sintered nickel positive electrode	R. T. Barton, M. Hughes, S. A. G. R. Karunathilaka and N. A. Hampson
405-413	Electrochemical mass transfer studies in open cavities	E. F. C. Somerscales and M. Kassemi
415-420	The effect of gallium and phosphorus on the corrosion behaviour of aluminium in sodium chloride solution	A. Mance, D. Cerović and A. Mihajlović
421-429	Grilles négatives composites pour accumulateurs au plomb	J. C. Viala, M. El Morabit, J. Bouix, D. Micheaux and G. Dalibard
431-439	Concentration of carbon dioxide by a high-temperature electrochemical membrane cell	M. P. Kang and J. Winnick
441-445	The influence of catalyst-supporting methods on electrochemical activity and the resultant stability of air electrodes activated with iron phthalocyanine	Toshiro Hirai, Jun-Ichi Yamaki and Akihiko Yamaji
447-451	Oxide ion and electron mixed conduction in the fluorite-type cubic solid solution in the system Bi₂O₃-Tb₂O_3.5	T. Esaka and H. Iwahara
452	Corrigendum	O. Lanzi, R. F. Savinell and R. E. Horn
452	Erratum	D. Sh. Cheng, A. Reiner and E. Hollax
453-458	Ideally rechargeable cadmium electrodes for alkaline storage batteries	S. Sathyanarayana
459-468	Behaviour of Li₄SiO₄ and its solid solutions during d.c. and a.c. measurements	K. Jackowska and A. R. West
469-470	Electvosynthesis of organic compounds. IV. Synthesis of some arylnitromethane compounds	M. T. Ismail, M. F. El-Zohry and A. A. Abdel-Wahab
471-472	Improvement of current efficiency in the cathodic formation of metal powders	A. T. Kuhn, P. Neufeld and K. Young

Volume 15, Number 4 / July 1985

473	Editorial
475-484	Growth kinetics of bubbles electrogenerated at microelectrodes	N. P. Brandon and G. H. Kelsall
485-493	Interfacial electrical properties of electrogenerated bubbles	N. P. Brandon, G. H. Kelsall, S. Levine and A. L. Smith
495-501	The application of the methods of electrode kinetics, especially the impedance, to the study of gas evolving reactions at electrodes	J. A. Harrison
503-508	Characterization of electrolytic bubble evolution by spectral analysis. Application to a corroding electrode	C. Gabrielli, F. Huet and M. Keddam
509-515	Effect of operational parameters on gas evolution in electrolyte bulk: possibilities for lowering interelectrode resistance	B. Krause and H. Vogt
517-526	Modelling of gas evolving electrolysis cells. I. The gas voidage problem	G. Kreysa and M. Kuhn
527-536	Mass diffusion-controlled bubble behaviour in boiling and electrolysis and effect of bubbles on ohmic resistance	S. J. D. Stralen and W. M. Sluyter
537-548	The effect of the gas void distribution on the ohmic resistance during water electrolytes	B. E. Bongenaar-Schlenter, L. J. J. Janssen, S. J. D. Van Stralen and E. Barendrecht
549-555	Mass transfer at gas evolving electrodes	L. J. J. Janssen and E. Barendrecht
557-566	Mass and momentum transfer enhancement due to electrogenerated gas bubbles	F. Giron, G. Valentin, M. Lebouche and A. Storck
567-574	Potential distribution along gas evolving electrodes	C. Elsner and F. Coeuret
575-580	Gas evolution on porous electrodes	A. C. C. Tseung
581-590	Bubble characteristics and aerosol formation in electrowinning cells	A. Papachristodoulou, F. R. Foulkes and J. W. Smith
591-601	Determination of state-of-discharge of zinc-silver oxide button cells. III. In situ impedance measurements of each electrode	Jean -Paul Randin
603-607	Studies on the lithium and potassium uptake of nickel hydroxide electrodes	R. D. Armstrong, Anil K. Sood and M. Moore
609-618	An investigation of sulphite ion oxidation as an alternative anodic reaction in fluidized bed electrowinning or other high rate electrolysis cells	K. A. Spring and J. W. Evans
619-629	A chemically regenerative redox fuel cell. II	J. T. Kummer and D. -G. Oei

Volume 15, Number 5 / September 1985

631-637	Tensile properties of acid copper electrodeposits	Dennis Anderson, Ron Haak, Cameron Ogden, Dennis Tench and John White
639-647	Fundamental studies on a new concept of flue gas desulphurization	G. Kreysa, J. M. Bisang, W. Kochanek and G. Linzbach
649-658	Factors affecting the structure of copper deposits electrowon from aqueous chloride electrolyte	D. J. Mackinnon, J. M. Brannen and R. S. McMillan
659-670	Recycle reactor models for complex electrochemical/chemical reaction systems	Keith Scott
671-674	Single electrode heat of molten NaCl electrolysis: measurement by electrolytic calorimeter and heat flux transducer (HFT)	Yasuhiko Ito, Hidetaka Hayashi, Norio Hayafuji and Shiro Yoshizawa
675-683	Electrochemical behaviour of pure iron in concentrated sodium hydroxide solutions at different temperatures: a triangular potential sweep voltammetric study	V. S. Muralidharan and M. Veerashanmugamani
685-696	The electrochemical behaviour of copper in alkaline solutions containing sodium sulphide	M. R. Gennero De Chialvo and A. J. Arvia
697-704	On the use of pyrrole black in zinc-halogen batteries	Giuliano Mengoli, Marco M. Musiani, Renato Tomat, Sergio Valcher and Derek Pletcher
705-710	Effect of manganese (II) added to the electrolyte on the properties of lead anodes used in oxidation of ferrous sulphate to ferric sulphate	B. Kołodziej and Z. Adamski
711-717	The dissolution of iron from the negative material in pocket plate nickel-cadmium batteries	M. Z. A. Munshi, A. C. C. Tseung and J. Parker
719-725	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst. VI. The influence of zinc chloride on the chlorination of naphthalene	Z. Ibrisagic, D. Pletcher, W. N. Brooks and K. P. Healy
727-735	Preparation and reproducibility of a thermal silver-silver chloride electrode	A. Arévalo, R. M. Souto and M. C. Arévalo
737-744	Effect of an organic additive on the impedance of cadmium in alkaline solution	M. Z. A. Munshi, A. C. C. Tseung, J. Parker and J. L. Dawson
745-754	Adsorption on packed bed electrodes	P. J. Mayne and R. Shackleton
755-766	An a.c. impedance study of steel in concrete	P. Lay, P. F. Lawrence, N. J. M. Wilkins and D. E. Williams
767-770	Adsorption and corrosion inhibition properties of thymol	L. J. Aljinović and V. Gotovac
771-773	The electrochemical reduction of anthraquinone to anthrone in concentrated H₂SO₄	Ch. Comninellis and E. Plattner
774-777	High efficiency cathodes for alkaline air electrodes	A. K. Shukla, R. Manoharan, C. Paliteiro, A. Hamnett and J. B. Goodenough
777-780	A model for correlating mass transfer data in parallel plate gas sparged electrochemical reactors	G. H. Sedahmed
781-783	Electron-beam-induced crystallization of anodic barrier films on aluminium: influence of incorporated anions	K. Shimizu, K. Kobayashi, G. E. Thompson and G. C. Wood
784	Book review	P. N. Bartlett
785-787	Calendar

Volume 15, Number 6 / November 1985

789-805	Advances and future prospects in copper electrowinning	W. Charles Cooper
807-824	Enhanced mass transfer at the rotating cylinder electrode: III. Pilot and production plant experience	D. R. Gabe and F. C. Walsh
825-836	Potentiodynamic electrodeposition of paint (EDP)	Fritz Beck and Harald Guder
837-858	Reactor engineering models of complex electrochemical reaction schemes. III. Galvanostatic operation of parallel reactions in batch reactors	Keith Scott
859-864	Reactor engineering models of complex electrochemical reaction schemes IV. Galvanostatic operation of series reactions with solvent decomposition	Keith Scott
865-878	The importance of cathode zinc morphology as an indicator of industrial electrowinning performance	P. A. Adcock, A. R. Ault and O. M. G. Newman
879-886	Recovery and recrystallization of electrodeposited bright copper coatings at room temperature. I. Microhardness in relation to coating structure	D. S. Stoychev, I. V. Tomov and I. B. Vitanova
887-894	Recovery and recrystallization of electrodeposited bright copper coatings at room temperature. II. X-ray investigation of primary recrystallization	I. V. Tomov, D. S. Stoychev and I. B. Vitanova
895-900	Measurements of a.c. impedance of sodium-sulphur cells with symmetric and asymmetric resistance behaviour	G. Staikov, P. D. Yankulov, B. S. Savova-Stoynov and Z. B. Stoynov
901-906	Effects of quinoneimine dyes on lithium cycling efficiency for LiClO₄-propylene carbonate	Shin -Ichi Tobishima and Takeshi Okada
907-911	Anodic formaldehyde oxidation on Pt, Pd, Au and Pd-Au alloy electrodes in NaOH and Na₂CO₃ solutions	M. Enyo
913-924	Impédances de cellules de conductivité. I. Détermination des plages de fréquence de mesure de la conductivité	G. Barral, J. P. Diard, B. Gorrec, Lu Dac Tri and C. Montella
925-935	Modelling of a continuous parallel plate plug flow electrochemical reactor: electrowinning of copper	F. Lapicque and A. Storck
937-945	Inhibition of PbO₂ formation during lead electrowinning	P. Ramachandran, K. V. Venkateswaran and R. Srinivasan
947-952	Electrochemical alloying of nickel with niobium in molten fluorides	Pierre Taxil and Qiao Zhi Yu
953-960	The effect of copper on zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon
961-967	Effect of mesh size on the performance of Teflon bonded oxygen-evolving electrodes	J. C. Botejue Nadesan and A. C. C. Tseung
969	Use of bromide and thiocyanate ion-sensitive electrodes in the presence of quaternary ammonium ions	Simi A. Khan and Bryan G. Reuben
970	Book review	Derek Pletcher
971-972	Calendar

Volume 16, Number 1 / January 1986

1-7	Information sources for electrochemistry	C. W. Moulton
8-14	Electrochemical oxidation of aliphatic hydrocarbons promoted by inorganic radicals. II. NO₃ radicals	Renato Tomat and Adelio Rigo
15-22	Electrochemical behaviour of graphite-epoxy composite materials (GECM) in aqueous salt solutions	F. Bellucci, A. Di Martino and C. Liberti
23-27	An investigation of the solid-state cell Cu/Rb₄Cu₁₆I₇Cl₁₃/Cu_xTiS₂	K. Kuwabara and K. Sugiyama
28-40	Performance of zirconia membrane oxygen sensors at low temperatures with nonstoichiometric oxide electrodes	S. P. S. Badwal and F. T. Ciacchi
41-52	Interactions between large organic cations and cation exchange membranes	Toshikatsu Sata, Kuniaki Takata and Yukio Mizutani
53-61	The effects of nickel and cobalt and their interaction with antimony on zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon, R. M. Morrison and J. M. Brannen
62-68	The electrodeposition of metals onto polypyrrole films from aqueous solution	G. K. Chandler and D. Pletcher
69-74	Electroplating of Fe-Ni alloys: Effects of sulphamic acid and sulphosalicylic acid	S. N. Srimathi and S. M. Mayanna
75-81	Etude des propriétés électriques et électrochimiques d'un réseau de polyuréthanne à base de polyéther chargé de perchlorate de lithium	J. F. Le Nest, H. Cheradame, F. Dalard and D. Deroo
82-92	Stability of an electrolytic alloy deposition process	E. J. Derhun and T. Z. Fahidy
93-100	Behaviour of a copper-AISI 304 stainless steel mixed anode in electrolytic copper refining with periodic current reversal	A. Rojo and J. González
101-108	The electrochemistry of nitrate-amide melts: Reactions of the calcium anode in room temperature nitrate-amide melts	G. E. McManis, A. N. Fletcher, D. E. Bliss and M. H. Miles
109-115	Pressure build-up in aluminium electrolytic capacitors under stressed voltage conditions	C. Gómez-Aleixandre, J. M. Albella and J. M. Martínez-duart
116-120	The effect of electro-osmosis on the synthesis of lead and tin fluoroborates	Chang C. Sun and Chi C. Wan
121-126	Simultaneous electrochemical removal of copper and chemical oxygen demand using a packed-bed electrode cell	Katsuki Kusakabe, Hiroshi Nishida, Shigeharu Morooka and Yasuo Kato
127-133	Aluminium cathode effects in zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon and J. M. Brannen
134-146	Reaction kinetics and reaction techniques for mediated oxidation of methylarenes to aromatic ketones	H. Wendt and H. Schneider
147-155	Activity of anodic oxide films on metal and cermet anodes in cryolite-alumina melts	P. G. Russell
157-158	Calendar

Volume 16, Number 2 / March 1986

159-167	The lead dioxide electrode	S. R. Ellis, N. A. Hampson, M. C. Ball and F. Wilkinson
168-174	Electrodeposited CdSe_0.5Te_0.5: Photoelectrochemical solar cells	R. N. Bhattacharya
175-188	The cycling behaviour of zinc electrodes in a nickel oxide-zinc accumulator	J. Hendrikx, W. Visscher and E. Barendrecht
189-195	Current levelling behaviour under pulse current electroplating conditions: The role of reaction pseudocapacitance	Harold E. Hager
196-202	Étude de la reduction électrochimique de AlCl₃ dans le dimethylsulfoxyde à 25°C	Yannis Chryssoulakis, Sofia Kalogeropoulou, Alexandra Protopappa and Georgia Manoli
203-212	The electrochemistry of coal and coal liquids. II. Cyclic voltammetry of H-coal liquids	Leonel M. Santos and Richard P. Baldwin
213-222	Electrochemical synthesis using reactant-incorporated graphite powder electrodes: The reduction of p-dinitrobenzene in dilute aqueous acid	R. H. Dahm, R. J. Latham and S. E. Mosley
223-228	Properties and initial discharge behaviour of graphite fluorides decomposed under chlorine	Rika Hagiwara, Tsuyoshi Nakajima, Kaoru Nogawa and Nobuatsu Watanabe
229-238	The electrochemistry of nitrate-amide melts: Reactions of nickel and copper in nitrate-amide melts	G. E. McManis, A. N. Fletcher, D. E. Bliss and M. H. Miles
239-249	The anodic oxidation of poly(N-vinylcarbazole) films	R. G. Compton, F. J. Davis and S. C. Grant
250-258	A model-based analysis of heat transport in electrolytic reactors	Thomas Z. Fahidy
259-264	High ionic conduction in tetragonal solid solution of the system La₂O₃-MgF₂	T. Esaka, A. Aoki and H. Iwahara
265-273	The application of the measurement of impedance to the corrosion of dental amalgams	M. J. Gross and J. A. Harrison
274-280	Studies on the effect of cobalt addition to the nickel hydroxide electrode	Anil K. Sood
281-286	Electrochemical behaviour of CuO-TiO₂ catalysts	A. Tranchant, R. Messina and J. Perichon
287-290	Electrocapillary sensing devices. VI. Displacement meters	Zbigniew Figaszewski and Zbigniew Koczorowski
291-303	Secondary current distribution in a two-dimensional model cell composed of an electrode with an open part	Yoshinori Nishiki, Koichi Aoki, Koichi Tokuda and Hiroaki Matsuda
304-306	Electrochemical chlorination of butadiene using CeCl₃-MeCN anolyte	Y. Takasu, M. Masaki, Y. Matsuda and H. Watanabe
307-308	State-of-charge measurement of the lithium-carbon monofluoride battery by chronopotentiometry	James R. Sandifer
309-311	Effective conductivities of FeS positives in LiCl-LiBr-LiF electrolyte at different states of charge	M. Hiroi and H. Shimotake
313	Book reviews	Derek Pletcher
314-315	Calendar

Volume 16, Number 3 / May 1986

317-331	Recent developments of the chlorine industry in Japan	F. Y. Masuda
332	Announcement
333-338	The nucleation of lead from halide-containing solutions	J. Mostany, J. Parra and B. R. Scharifker
339-344	Electrochemical reduction of potassium from potassium chloride in propylene carbonate electrolyte with aluminium anodes	R. T. Atanasoski, H. H. Law and C. W. Tobias
345-356	Electrochemical machining of refractory materials	Corinne A. Coughanowr, Bernard A. Dissaux, Rolf H. Muller and Charles W. Tobias
357-364	Chemical evolution of CO₂ by electrocatalytic oxidation of vanadium-impregnated coke anode material	H. Gardner, W-C. Lu and L. J. Rogers
365-373	Copper recovery from dilute solutions in the Falling-Film cell	J. Legrand, J. M. Marracino and F. Coeuret
374-378	Mass transfer characteristics of gas-sparged fixed-bed electrodes composed of stacks of vertical screens	G. H. Sedahmed, H. A. Farag, A. A. Zatout and F. A. Katkout
379-386	Electrochemical behaviour of some transition metal oxides in molten dimethylsulphone at 150°C	J. P. Pereira-Ramos, R. Messina and J. Perichon
387-392	The estimation of the coulombic efficiency of zinc electrodeposition by measurement of current efficiencies at a rotating ring disc electrode	E. J. Frazer and I. C. Hamilton
393-402	The role of amines as complexing agents in film growth during electropolymerization of ester substituted phenols onto mild steel	Minh-Chau Pham, Pierre-Camille Lacaze, Philippe Mourcel and Jacques-Emile Dubois
403-412	A study on the swelling of a sintered nickel hydroxide electrode	Masahiko Oshitani, Takashi Takayama, Koichiro Takashima and Shigeo Tsuji
413-421	Characterization of oxide layers on copper by linear potential sweep voltammetry	R. L. Deutscher and R. Woods
422-430	Mass transfer at carbon fibre electrodes	D. Schmal, J. Van Erkel and P. J. Van Duin
431-439	Voltage increase of copper compound electrodes resulting from the addition of sulphur for seawater batteries	M. Hiroi
440-446	Indirect hydroxylation of aromatic rings using electrochemical methods	R. P. Kreh, M. E. Tadros, H. M. Hand, M. P. Cockerham and E. K. Smith
447-456	Electrowinning of zinc from alkaline solutions	Jean St-Pierre and Dominique L. Piron
457-462	An experimental study of a fixed bed chlor-alkali reactor	Colin Oloman and John Radcliffe
463-471	The effect of impurities on the anodic process in an industrial pyrophosphate copper bath	D. De Filippo, A. Rossi and M. A. Spezziga
472-473	Calendar
474	Enhanced mass transfer at the rotating cylinder electrode: III. Pilot and production plant experience	D. R. Gabe and F. C. Walsh

Volume 16, Number 4 / July 1986

475-489	Solid state potentiometric oxygen gas sensors	W. C. Maskell and B. C. H. Steele
490-504	The dissolution and passivation of polycrystalline iron electrodes in boric acid-borate buffer solutions in the 7.5–9.2 pH range	M. E. Vela, J. R. Vilche and A. J. Arvia
505-512	Conductivité électrique totale de sels doubles de type iodure d'argent—polydiiodure de N pentylène N′ alkylène tétraméthyl N, N, N′, N′, diammonium	G. Schmitt and J. J. Rosenberg
513-516	Measurement of short circuit current for low internal resistance batteries	S. Okazaki, S. Higuchi, N. Kubota and S. Takahashi
517-526	Correlation of electrochemical and ellipsometric data in relation to the kinetics and mechanism of Cu₂O electroformation in alkaline solutions	M. R. Gennero De Chialvo, J. O. Zerbino, S. L. Marchiano and A. J. Arvia
527-543	Improved slurry zinc/air systems as batteries for urban vehicle propulsion	P. C. Foller
544-554	Electrochemistry of the chalcocite-xanthate system	C. S. O'Dell, G. W. Walker and P. E. Richardson
555-564	The estimation of the residual capacity of sealed lead-acid cells using the impedance technique	M. Hughes, R. T. Barton, S. A. G. R. Karunathilaka and N. A. Hampson
565-574	Anodic characteristics of amorphorous palladium-base alloys in sodium chloride solutions	N. Kumagai, A. Kawashima, K. Asami and K. Hashimoto
575-582	An electrochemical route to trimethylhylhydroquinone	E. Oberrauch and L. Eberson
583-590	Electrochemical reactions of H₂S in molten sulphide	Ernest K. Banks and Jack Winnick
591-604	Kinetics of copper electrodeposition in citrate electrolytes	E. Chassaing, K. Vu Quang and R. Wiart
605-614	Electrodissolution kinetics of an Fe−Ni alloy in acidic chloride media of 1.0 M ionic strength	N. L. Nguyen and Ken Nobe
615-625	Effect of gas evolution on current distribution and ohmic resistance in a vertical cell under forced convection conditions	Yoshinori Nishiki, Koichi Aoki, Koichi Tokuda and Hiroaki matsuda
626-628	Effect of fluorspar on electrowinning of magnesium	Gopalakrishna M. Rao
629-630	Calendar

Volume 16, Number 5 / September 1986

631-635	Predicted and observed initial short circuit current for lead-acid batteries	S. Okazaki, S. Higuchi, N. Kubota and S. Takahashi
636-642	Factors affecting the discharge lifetime of lithium-molten nitrate thermal battery cells using soluble cathode materials	G. E. McManis, A. N. Fletcher and M. H. Miles
643-653	Process modelling in the porous molten carbonate fuel cell (MCFC) cathode	J. Jewulski
654-662	The coulombic efficiency of zinc electrowinning in high-purity synthetic electrolytes	T. Biegler and E. J. Frazer
663-668	High temperature-type proton conductive solid oxide fuel cells using various fuels	H. Iwahara, H. Uchida and S. Tanaka
669-672	Microthrowing power of electrolytes for the deposition of nickel-iron alloys. I. Components determining the levelling effect of nickel-iron plating electrolytes	M. Chomakova and S. Vitkova
673-677	Microthrowing power of electrolytes for the deposition of nickel-iron alloys. II. Levelling effect of iron in nickel-iron electrolytes and its microdistribution in the alloy coating	M. Chomakova and S. Vitkova
678-682	Measurement of electrolytic conductivity in highly conducting solutions	Robert J. Guanti and Patrick J. Moran
683-692	Photo-electrochemical solar cells with a SnO₂-liquid junction sensitized with highly concentrated dyes	Michiko Shimura, Kiyoaki Shakushiro and Yukio Shimura
693-702	The behaviour of platinized platinum electrodes in acid solutions: correlation between voltammetric data and electrode structure	T. Kessler, A. M. Castro Luna, W. E. Triaca and A. J. Arvia
703-706	Structure of silver electrodeposits plated from different complex electrolytes	I. Kristev and M. Nikolova
707-711	A new bath for the electrodeposition of aluminium. I. conductivity measurements	W. A. Badawy, B. A. Sabrah and N. H. Y. Hilal
712-718	Determination of mixed ionic and electronic conduction in commercial-grade magnesia-stabilized zirconia electrolyte	K. Yamada, M. Murase and M. Iwase
719-731	The electrochemical behaviour of silver sulphide in sulphuric acid solutions	D. W. Price, G. W. Warren and B. Drouven
732-736	Mediated reduction of CO and CO₂ to methanol by surface-confined metal complexes in the presence of homogeneous catalysts	Kotaro Ogura
737-744	High-temperature electroplating of chromium from molten FLINAK	Ronald A. Bailey and Toshinobu Yoko
745-756	A comparative study of the oxidative and reductive dissolution of magnetite in acidified CuSO₄-acetonitrile-H₂O and CuCl₂−NaCl−H₂O leach solutions	Z. -Y. Lu and D. M. Muir
757-767	Indirect electrosynthesis ofp-methoxybenzaldehyde	G. Kreysa and H. Medin
768-770	A note on the effectiveness of fixed bed electrodes	K. Scott
771-774	Spongy electrodeposit formation	K. I. Popov, N. V. Krstajić, S. R. Popov and M. I. Čekerevac
775-780	Electrolytic production of magnesium: Effect of current density	Gopalakrishna M. Rao
781-785	Book reviews	L. M. Peter, O. R. Brown, T. H. Lilley, G. H. Kelsall and Michael L. Hitchman
786-787	Calendar

Volume 16, Number 6 / November 1986

789	Editorial
791-802	The influence of cell design and electrolysis parameters on the cathodic coupling of butadiene and carbon dioxide in acetonitrile. I. Undivided parallel plate configurations	D. Pletcher and J. Tietje Girault
803-811	Hydrogénation électrochimique du dinitronaphtalène: comparaison avec le procédé catalytique	J. Chaussard, R. Rouget and M. Tassin
812-818	Numerical models for reactions catalysed by homogeneous mediators: the case of Fenton's reagent	M. J. Clifton and A. Savall
819-824	An electrolysis cell with close consecutive flow-through porous electrodes for particular organic electrosynthesis	C. Lamoureux, C. Moinet and A. Tallec
825-835	Electrochemical synthesis of 4-aminobenzoic acid from 4-nitrobenzoic acid: fundamental aspects	F. Lapicque and A. Storck
836-850	Selectivity analysis in electrochemical reactors. I. Experimental study of an electro-organic reaction coupled with parasitic homogeneous chemical reactions	L. Weise, G. Valentin, A. Storck, R. Mauge and A. Cohen
851-866	Selectivity analysis in electrochemical reactors. II. Engineering models of a batch reactor with a complex reaction sequence	L. Weise, G. Valentin and A. Storck
867-874	Phase composition and structure of silver-antimony alloy deposits plated from ferrocyanide-thiocyanate electrolytes	I. Kristev and M. Nikolova
875-878	Structural effects during the electrodeposition of silver-antimony alloys from ferrocyanide-thiocyanate electrolytes	I. Kristev and M. Nikolova
879-884	Antimony in lead-acid cells. III. Transport measurements	A. A. Jenkins, W. C. Maskell and F. L. Tye
885-893	An indirect electrochemical process for the production of naphthaquinone	I. M. Dalrymple and J. P. Millington
894-898	Influence of superimposed alternating current on capacity and cycle life for lead-acid batteries	S. Okazaki, S. Higuchi, O. Nakamura and S. Takahashi
899-906	The effects of As(III) and As(V) on zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon, J. M. Brannen and P. L. Fenn
907-912	Electrochemical synthesis of tetra-alkylthiuram disulphides in emulsions	Z. Ibrišagić, V. Mišović, I. Tabaković and I. Šantić
913-919	Electrochemical monitoring of electrogalvanizing solutions	T. J. O'Keefe, S. F. Chen, E. R. Cole and M. Dattilo
920-928	Room temperature discharge characteristics of Li/NH₄NO₃−LiNO₃-amide cells using silver salts as active cathode materials	G. E. McManis, A. N. Fletcher, D. E. Bliss and M. H. Miles
929-934	Extraction of gallium metal by exchange reaction between sodium amalgam and Ga(III): a cyclic voltammetric study	A. Varadharaj and G. Prabhakara Rao
935-940	An electrochemical oxygen separator using an ion-exchange membrane as the electrolyte	Yuko Fujita, Hitoshi Nakamura and Tamotsu Muto
941-946	Current efficiencies and regeneration of poisoned raney nickel in the electrohydrogenation of glucose to sorbitol	K. Park, P. N. Pintauro, M. M. Baizer and K. Nobe
947-963	Electrochemical study of liquid-solid mass transfer in packed bed electrodes with upward and downward co-current gas-liquid flow	A. Storck, M. A. Latifi, G. Barthole, A. Laurent and J. C. Charpentier
964-966	On the duplex layer nature of anodic Al₂O₃ films	C. Gomez-Aleixandre, I. Montero and J. M. Albella
967-970	Reference electrodes and barrier junctions in chloride melts containing magnesium chloride	Gopalakrishna M. Rao
971	Calendar

Volume 17, Number 1 / January 1987

1-21	Potential-pH diagrams for complex systems	John C. Angus, Bei Lu and Michael J. Zappia
22-32	Insoluble anode of porous lead dioxide for electrosynthesis: preparation and characterization	N. Munichandraiah and S. Sathyanarayana
33-48	Kinetics and mechanism of anodic oxidation of chlorate ion to perchlorate ion on lead dioxide electrodes	N. Munichandraiah and S. Sathyanarayana
49-56	Electroplating of bright cadmium from an optimized acetate bath under the influence of superimposed alternating current	A. M. Abd El Halim, S. M. Abd El Wahaab, S. S. Abd El Rehim and E. A. Abd El Meguid
57-66	A mathematical model for non-ideal tank electrolysers	Thomas Z. Fahidy
67-76	Current distribution in a two-dimensional narrow gap cell composed of a gas evolving electrode with an open part	Yoshinori Nishiki, Koichi Aoki, Koichi Tokuda and Hiroaki Matsuda
77-81	Hypochlorite production. I. A model of the cathodic reactions	N. Krstajić, V. Nakić and M. Spasojević
82-90	Impedance analysis of electrodes modified with a reversible redox polymer film	C. Gabrielli, O. Haas and H. Takenouti
91-103	Zinc electrodeposit morphology under conditions of fluctuating current density	V. Jiricny, H. Choi and J. W. Evans
104-112	Comparative study of the potentiodynamic behaviour of aluminium at low potentials in barrier layer and in pore-forming electrolytes	P. Ll. Cabot, F. A. Centellas, J. A. Garrido and E. Pérez
113-122	Simulation and optimization of a packed bipolar cell by means of a combination of conducting paper and an electric model circuit	Yoshinori Miyazaki, Arira Katagiri and Shiro Yoshizawa
123-126	A parameter characterizing the geometry of expanded metal. I. A general mass transfer correlation for flow-by electrodes of expanded metal and wire cloth	S. Piovano and U. Böhm
127-133	A parameter characterizing the geometry of expanded metal. II. Natural convection mass transfer at expanded metal electrodes	S. Piovano and U. Böhm
134-146	Pumping effect due to gas evolution in flow-through electrolysers	Ivo Roušar
147-155	The influence of electrode structure on the adsorption and electro-oxidation of ethylene on platinum	S. M. Piovano, A. C. Chialvo, W. E. Triaca and A. J. Arvia
156-164	Electroplating of antimony and antimony-tin alloys	S. S. Abd El Rehim, A. Awad and A. El Sayed
165-173	The impedance of alkaline manganese cells and their relationship to cell performance. I. Interpretation of the basic impedance spectrum	R. Barnard, L. M. Baugh and C. F. Randell
174-184	The impedance of alkaline manganese cells and their relationship to cell performance. II. Correlation with short-circuit current and initial pulse discharge behaviour	R. Barnard, L. M. Baugh and C. F. Randell
185-195	The impedance of alkaline manganese cells and their relationship to cell performance. III. Correlation with high-rate pulse discharge capacity	R. Barnard, L. M. Baugh and C. F. Randell
196-204	Kinetics of anodic oxide film growth on indium in alkaline solution	S. J. Duncan and G. T. Burstein
205-214	Electropolishing of chromium in phosphoric acid-sulphuric acid electrolytes	L. Ponto and D. Landolt
215-218	Electrochemical behaviour of polypyrrole films as secondary battery electrodes in LiClO₄-propylene carbonate	F. Trinidad, J. Alonso-Lopez and M. Nebot
219	Response of solid-state ion-selective electrodes to quaternary ammonium ions	Walter S. Selig
220-222	Calendar

Volume 17, Number 2 / March 1987

223	Editorial	Douglas Inman
225-242	The chemistry and electrochemistry associated with the electroplating of group VIA transition metals	S. H. White and U. M. Twardoch
243-252	The role of diffusion of ionic species and of interdiffusion in the solid state in electrolytic deposition processes from molten salts	F. Lantelme
253-260	On the electrodeposition and characterization of niobium from fused fluoride electrolytes	G. P. Capsimalis, E. S. Chen, R. E. Peterson and I. Ahmad
261-269	Formation of corrosion-resistant layers by electrodeposition of refractory metals or by alloy electrowinning in molten fluorides	Pierre Taxil and Jean Mahenc
270-282	Controlled nucleation and growth in chromium electroplating from molten LiCl-KCl	T. Vargas and D. Inman
283-293	The corrosion and deposition performance of molten salt electrodeposited chromium coatings	A. M. Emsley and M. P. Hill
294-302	Electroplating silicon and titanium in molten fluoride media	J. Lepinay, J. Bouteillon, S. Traore, D. Renaud and M. J. Barbier
303-314	Characteristics and properties of electrodeposited chromium from aqueous solutions	M. McCormick and S. J. Dobson
315-321	On the electroplating of laminated chromium	E. S. Chen, G. P. Capsimalis and G. R. Weigle
322-328	Utilization of gas-diffusion electrodes catalysed with tungsten carbide as anodes for zinc electrowinning	V. Nikolova, I. Nikolov, T. Vitanov, A. Mobius and W. Schneider, et al.
329-339	Selectivity characteristics of the electrohydrodimerization of acrylonitrile	K. Scott, I. F. McConvey and J. Henderson
340-346	Mass transfer in electrolytic cells with gas stirring	O. N. Cavatorta and U. Böhm
347-356	Anodic characteristics of amorphous nickel-value metal alloys containing small amounts of platinum group elements in 0.5 M NaCl	N. Kumagai, Y. Samata, A. Kawashima, K. Asami and K. Hashimoto
357-369	A new bath for the electrodeposition of aluminium. II. Kinetics and mechanism of the deposition and dissolution processes	W. A. Badawy, B. A. Sabrah and N. H. Y. Hilal
370-384	Enhanced mass transfer using roughened rotating cylinder electrodes in turbulent flow	D. R. Gabe and P. A. Makanjuola
385-397	Electrochemical study of mass transfer in Li-Mg and Li-Mg-Al alloys	Y. Iwadate, M. Lassouani, F. Lantelme and M. Chemla
398-412	Kinetics of the Mn(III)-mediated electrochemical synthesis of sorbic acid precursors from acetic acid and butadiene	Sa Van Ho
413-418	High-performance carbon electrodes for acid methanol—air fuel cells	Ramasamy Manoharan, John B. Goodenough and Andrew Hamnett
419-426	The voidage problem in gas-electrolyte dispersions	H. Vogt
427-433	Effect of an organic additive on the electrocrystallization of cadmium in alkaline solution	M. Z. A. Munshi, A. C. C. Tseung and J. Parker
434-436	Mass transfer at rough surfaces: reconsideration of data reported by Sedahmed et al.	P. A. Makanjuola and D. R. Gabe
437-441	Cyclic voltammetry test for the effectiveness of cathode additives in the sodium-sulphur battery	F. Alessandrini and S. Casadio
442-444	Calendar

Volume 17, Number 3 / May 1987

445-452	Variations of cell resistance and current distribution with current feeder configurations	Yoshinori Nishiki, Koichi Aoki, Koichi Tokuda and Hiroaki Matsuda
453-462	Identification of optimum conditions for zinc electrowinning in high-purity synthetic electrolytes	E. J. Frazer and T. Lwin
463-472	Open circuit voltage recovery of discharged and shorted nickel-cadmium cells	M. Durga Prasad and S. Sathyanarayana
473-479	On the behaviour of carbon black in positive lead-acid battery electrodes	H. Dietz, J. Garche and K. Wiesener
480-488	Simulation of an extractive electrochemical reaction operated under limiting current conditions in a parallel-plate reactor	Yen-Shiang Shih and Jeou-Long Lee
489-494	Miniature oxygen pump-gauge. III. Application of a periodic current waveform	W. C. Maskell, H. Kaneko and B. C. H. Steele
495-504	An oxygen sensor based on the semiconducting properties of (U_0.3Y_0.7)O_2−x	S. P. S. Badwal and F. T. Ciacchi
505-514	Redetermination of the standard potential of the mercuric oxide electrode at temperatures between 283 and 363 K and the solubility product constant of mercuric hydroxide	P. Longhi, T. Mussini, R. Orsenigo and S. Rondinini
515-524	Studies of Zn\|ZnX₂\|polyaniline batteries. I. X.=Cl and Br	Giuliano Mengoli, Marco M. Musiani, Derek Pletcher and Sergio Valcher
525-531	Studies of Zn\|ZnX₂\|polyaniline batteries. II. X=I	Giuliano Mengoli, Marco M. Musiani, Derek Pletcher and Sergio Valcher
532-544	Electrosynthesis of propylene oxide in a bipolar trickle-bed reactor	A. Manji and C. W. Oloman
545-551	Gas phase relations for protonic solid-electrolyte fuel cells	J. D. Canaday, T. A. Wheat, A. Ahmad and A. K. Kuriakose
552-558	Approximate evaluation of cell resistance with resistive electrodes	Koichi Aoki, Yoshinori Nishiki, Koichi Tokuda and Hiroaki Matsuda
559-566	Kinetics of the dissolution behaviour of anodic oxide films on niobium in NaOH solutions	W. A. Badawy, A. G. Gad-Allah and H. H. Rehan
567-573	Electrochromic properties of alkylviologen-cyclodextrin systems	A. Yasuda, H. Mori and J. Seto
574-582	Electrodeposition of zinc-nickel alloys from chloride solution	L. Felloni, R. Fratesi, E. Quadrini and G. Roventi
583-588	Effect of drag-reducing polymer on the rate of mass transfer in fixed-bed reactors	G. H. Sedahmed, I. A. S. Mansour, O. A. Fadali, M. M. Nassar and M. M. El-Shayeb
589-599	Textural and structural studies on nickel hydroxide electrodes. II. Turbostratic nickel (II) hydroxide submitted to electrochemical redox cycling	A. Delahaye-Vidal and M. Figlarz
600-606	Conductivité électrique totale du systeme iodure d'argent-diiodure de diazonia-6,9-dispiro[5.2.5.3]heptadecane	Jacques Estienne and Joseph J. Rosenberg
607-612	Lithium secondary cells using LiX (X=ClO₄, BF₄) as electrolyte and poly(2,5-pyrrolylene) and poly(2,5-thienylene) as materials for positive electrodes	Takakazu Yamamoto, Masanobu Zama, Masakazu Hishinuma and Akio Yamamoto
613-624	Photoelectrochemical properties ofp-RuS₂	S. Piazza and H. Tributsch
625-634	Potentiometric measurements of ionic transport parameters in poly(ethylene oxide)-LiX electrolytes	A. Bouridah, F. Dalard, D. Deroo and M. B. Armand
635-640	Mono-and multilayer formation studies of silver chloride on silver electrodes from chloride-containing solutions	S. Jaya, T. Prasada Rao and G. Prabhakara Rao
641-647	Measurements of electrochemical impedance on the alloy Al 2024T3: an analysis of parameters used to predict the quality of the anodic film	O. E. Barcia, J. L. Camara and O. R. Mattos
649-652	Role of 2-thiouracil as addition agent during the electrodeposition of copper on the copper (III) plane	R. Lekshmana Sarma and S. Nageswar
653-656	Hexacyanoferrate layers as electrodes for secondary cells	E. W. Grabner and S. Kalwellis-Mohn
657-660	Long-term performance of carbon gas-diffusion air electrodes in saline electrolyte	S. K. Zečević, A. R. Despić, D. M. Dražić, A. Kaisheva and S. Gamburzev, et al.
661	Book reviews	D. Pletcher
662-666	Calendar

Volume 17, Number 4 / July 1987

667-674	Electrodeposition of Cd-Ni alloys from acetate baths using a superimposed alternating current	A. M. Abd El-Halim, S. S. Abd El Rehim, S. M. Abd El Wahaab and E. A. Abd El Meguid
675-683	Electrowinning of cobalt from a sulphate bath containing H₃BO₃ and NaF	S. C. Das and T. Subbaiah
684-694	Electrolytic oxidation of cuprocyanide electroplating waste waters under different pH conditions	Jin-Yih Hwang, Yung-Yun Wang and Chi-Chao Wan
695-701	Impédances de cellules de conductivité. II. Utilisation du dioxyde de ruthénium comme matériau d'électrodes	G. Barral, J. -P. Diard, B. Le Gorrec, Lu Dac Tri and C. Montella
702-706	Passivation of porous carbon cathodes in lithium-thionyl chloride cells	A. J. Hills, N. A. Hampson and M. Hayes
707-714	Formation of metal fog during molten salt electrolysis observed in a see-through cell	Qiu Zhuxian, Fan Liman, K. Grjotheim and H. Kvande
715-723	‘Breathing’ of the lead-acid battery negative plate during cycling	D. Pavlov and S. Ignatova
724-730	Recirculating feed operation of bipolar packed-bed and trickle-bed electrode cells equipped with mesh spacers	Katsuki Kusakabe, Takeshi Kimura, Shigeharu Morooka and Yasuo Kato
731-736	Electrochemical approach to the recycling of nitration waste concentrated sulphuric acid	R. N. Gedye, Y. N. Sadana, A. C. E. Edmonds and M. L. Langlois
737-745	Oxygen evolution reaction on thermally treated iridium oxide films	Marijan Vuković
746-752	Mass transfer at packed-bed, gas-evolving electrodes	G. H. Sedahmed
753-759	Paired electro-oxidation. I. Production of benzaldehyde	Jiin-Jiang Jow, An-chen Lee and Tse-Chuan Chou
760-764	Electrochemical behaviour of Cu-Zn-Al oxide catalysts in DMSO₂ at 150°C	A. Tranchant, R. Messina and J. Perichon
765-772	Nucleation and growth of zinc electrodeposited from acidic zinc solutions	A. C. Beshore, B. J. Flori, G. Schade and T. J. O'Keefe
773-778	Performance of a pressurized electrochemical ozone generator	S. Stucki, H. Baumann, H. J. Christen and R. Kötz
779-788	Electrochemical behaviour of copper in aqueous solution containing potassium ethylxanthate	J. Gomez Becerra, R. C. Salvarezza and A. J. Arvia
789-799	Low-temperature charging behaviour of lead-acid cells	T. F. Sharpe and R. S. Conell
800-806	Importance of electrode/zirconia interface morphology in high-temperature solid electrolyte cells	Turgut M. Gür and Robert A. Huggins
807-812	Potentiodynamic behaviour of aluminium in propanedioic acid solutions	P. Ll. Cabot, F. A. Centellas, J. A. Garrido and E. Pérez
813-820	Transport studies on thin films of Ag₇I₄VO₄ solid electrolyte	Rajiv Kaushik, K. Hariharan and S. Radhakrishna
821-827	Hetero-epitaxial growth of zinc electrodeposits on low-carbon steel sheets	Kazuhito Kamel and Yasuya Ohmori
828-840	Electrochemical surface properties of Co₃O₄ electrodes	R. Boggio, A. Carugati and S. Trasatti
841-848	Modelling of tank electrolysers via Markov chains	Thomas Z. Fahidy
849-856	Electrochemical studies of the reaction between titanium metal and titanium ions in the KCl-NaCl molten salt system at 973 K	Chen Guang-Sen, Masazumi Okido and Takeo Oki
857-867	Electrochemical study of aluminium ion reduction in acidic AlCl₃-n-butyl-pyridinium chloride melts	Yannis Chryssoulakis, Jean-Claude Poignet and Georgia Manoli
868-876	On mechanistic differences in methanol oxidation in basic medium induced by the activation of gold electrodes	E. Gonzalez Hernan, C. Alonso and J. Gonzalez-Velasco
877-880	Simulation of a packed bipolar cell involving cathodic limiting current and anodic Tafel behaviour	Yoshinori Miyazaki, Akira Katagiri and Shiro Yoshizawa
881-883	Electrosynthesis of organic compounds. XI. Synthesis of some arylmalononitrile derivatives	M. T. Ismail
884-888	Calendar

Volume 17, Number 5 / September 1987

889-898	Electrokinetic dewatering and thickening. I. Introduction and historical review of electrokinetic applications	J. G. Sunderland
899-904	Anodization of molybdenum. II. Electrical breakdown	H. A. Abd El-Rahman, A. G. Gad-Allah and M. M. Abou-Romia
905-913	Electrosynthesis in systems of two immiscible liquids and a phase transfer catalyst. VII. The chlorination of substituted naphthalenes	S. R. Forsyth, D. Pletcher and K. P. Healy
914-924	Chromium-titanium-antimony oxide composite anodes: Electro-organic oxidations	F. Beck and H. Schulz
925-935	Reactor analysis of series and parallel electrochemical reactions during galvanostatic operation	K. Scott, I. F. McConvey and A. N. Haines
936-940	Preparation of high-purity antimony by electrodeposition	R. K. Iyer and S. G. Deshpande
941-948	Etude de la réaction de réduction électrochimique de l'aluminium dans les mélanges de chlorures alcalins et de chlorures-fluorures alcalins fondus à 450°C	Yannis Chryssoulakis and Sofia Kalogeropoulou
949-955	Comparative e.m.f. study of CaF₂ and β-alumina cells with Ni/NiF₂ and Fe/FeF₂ or Cr/CrF₂ electrodes	A. M. Azad and O. M. Sreedharan
956-964	Electrodeposition of catalytically active Co-Ni-Tl alloy powders from dilute sulphate baths	A. M. Abd El-Halim and R. M. Khalil
965-976	Traitement anodique de suspensions de poudre de graphite sur des électrodes de métal déployé	M. M. Letord-Quemere, F. Coeuret and J. Legrand
977-982	Reverse pulse plating of copper from acid electrolyte: A rotating ring disc electrode study	James R. White
983-996	Evaluation of electroactive intermediate states in anodic O₂ evolution at chemically formed nickel oxide: Comparison with behaviour at nickel metal anodes	Tong-Chang Liu and B. E. Conway
997-1001	Mono- and multilayer formation studies of silver iodide on silver electrode from iodide-containing solutions	S. Jaya, T. Prasada Rao and G. Prabhakara Rao
1002-1020	State of overpotential-deposited H species at electroplated platinum surfaces in comparison with bright platinum	Meir Elam and B. E. Conway
1021-1036	Influence of methylcellulose-coated paper separators on the corrosion, polarization and impedance characteristics of zinc in concentrated ammonium chloride solution. I. Behaviour in flooded electrolyte	L. M. Baugh and N. C. White
1037-1047	Influence of methylcellulose-coated paper separators on the corrosion, polarization and impedance characteristics of zinc in concentrated ammonium chloride solution. II. Comparison of data obtained in flooded electrolyte and battery environments	L. M. Baugh and N. C. White
1048-1056	Electrokinetic dewatering and thickening. II. Thickening of ball clay	J. G. Sunderland
1057-1064	Oxygen electroreduction in perfluorinated sulphonyl imides	M. Razaq, A. Razaq, E. Yeager, Darryl D. Desmarteau and S. Singh
1065-1074	Anodization of molybdenum. I. Galvanostatic anodization	A. G. Gad-Allah and H. A. Abd El-Rahman
1075-1082	Influence of the size of PbSO₄ crystals on their solubility and the significance of this process in the lead-acid battery	D. Pavlov and I. Pashmakova
1083-1092	Triangular potential sweep voltammetric study of porous iron electrodes in alkali solutions	G. Paruthimal Kalaignan, V. S. Muralidharan and K. I. Vasu
1093-1099	Potentiostatic study of the electrochemical nucleation of oxide films on cadmium in alkaline solutions	J. A. Garrido, F. Centellas, P. Ll. Cabot, R. M. Rodríguez and E. Pérez
1100-1103	Dual electrolyte-semiconductor contact CdSe electrochemical photocell	A. K. Tripathy and H. Ti Tien
1104-1109	Calendar

Volume 17, Number 6 / November 1987

1111-1117	Electrochemical polymerization of thionaphthene-indole	G. Casalbore Miceli, G. Beggiato, S. Daolio, P. G. Di Marco and S. S. Emmi, et al.
1118-1128	Mass transfer downstream of nozzles in turbulent pipe flow with varying Schmidt number	S. M. Chouikhi, M. A. Patrick and A. A. Wragg
1129-1143	Characterization of impurity effects in zinc electrowinning from industrial acid sulphate electrolyte	D. J. Mackinnon, J. M. Brannen and P. L. Fenn
1144-1149	Anodic levelling of model profiles with pulsating current	C. Clerc and D. Landolt
1150-1158	Analysis of the inductance influence on the measured electrochemical impedance	B. Savova-Stoynov and Z. B. Stoynov
1159-1170	Use of gas-diffusion electrodes for high-rate electrochemical reduction of carbon dioxide. I. Reduction at lead, indium- and tin-impregnated electrodes	M. N. Mahmood, D. Masheder and C. J. Harty
1171-1176	Electrokinetic dewatering and thickening. III. Electrokinetic cells and their application to a range of materials	J. G. Sunderland
1177-1189	Mass transfer at gas-evolving vertical electrodes	L. J. J. Janssen
1190-1197	Ruthenium dioxide as a hydrogen-evolving cathode	E. R. Kötz and S. Stucki
1198-1202	Conductivity measurements of electrodeposited polypyrrole	B. F. Cvetko, M. P. Brungs, R. P. Burford and M. Skyllas-Kazacos
1203-1212	Double-layer capacitance and polarization potential of baked carbon anodes in cryolite-alumina melts	Stanislaw Jarek and Jomar Thonstad
1213-1222	Electro-oxidation rate ofp-tert-butyltoluene in a bipolar packed-bed electrode cell	Hark Joon Kim, Katsuki Kusakabe, Satoko Hokazono, Shigeharu Morooka and Yasuo Kato
1223-1227	Use of gas-diffusion electrodes for high-rate electrochemical reduction of carbon dioxide. II. Reduction at metal phthalocyanine-impregnated electrodes	M. N. Mahmood, D. Masheder and C. J. Harty
1228-1233	Anodic oxidation of o-toluenesulphonamide to saccharine on a NiO(OH)-coated nickel anode	Jaromír Hlavatý, Viktor Bakos and Jiří Volke
1234-1245	Electrochemical phenomena in aqueous electrowinning of lead	Magdy Gircis and Edward Ghali
1246-1253	Mechanism of cathodic PtCl₆^2- reduction to platinum clusters on electrodes coated with polyvinylpyridinium films	Andrzej Kowal, Karl Doblhofer, Siegfried Krause and Gisela Weinberg
1254-1266	Mechanisms of electroless metal plating. III. Mixed potential theory and the interdependence of partial reactions	Perminder Bindra and Judith Roldan
1267-1280	Mechanism of copper-nickel alloy electrodeposition	E. Chassaing, K. Vu Quang and R. Wiart
1281-1295	Influence of various coated paper separator materials on the corrosion, polarization and impedance characteristics of zinc in concentrated soldium chloride solution	L. M. Baugh and N. C. White
1296-1303	Effects of additives on the suspension of products of discharge of zinc in alkaline solution	Peter C. Foller
1304-1314	Choked two-phase flow during electrochemical machining	I. Roušar
1315-1318	Current efficiency losses in indirect electrochemical processing	Ch. Comninellis and E. Plattner
1319-1320	Book review	A. T. Kuhn
1321-1326	Calendar

Volume 18, Number 1 / January 1988

1-14	Nine years of research and development on advanced water electrolysis. A review of the research programme of the Commission of the European Communities	Hartmut Wendt and Giancarlo Imarisio
15-22	Electrolytic production of silicon	D. Elwell and Gopalakrishna M. Rao
23-26	Etude de la reaction d'oxydo-réduction de l'aluminium dans des bains de chlorures alcalins fondus	Yannis Chryssoulakis, Frédéric Lantelme, Athina Alexopoulou and Sofia Kalogeropoulou
27-31	Electrosynthesis of cobalt (III) ions in concentrated H₃PO₄ medium	A. El Ghazali, S. Belcadi and J. J. Rameau
32-37	Effect of sodium and potassium sulphates on zinc electrowinning	A. R. Ault, E. J. Frazer and G. D. J. Smith
38-42	Evaluation of charge transfer resistance by geometrical extrapolation of the centre of semicircular impedance diagrams	Pierre R. Roberge and Réjean Beaudoin
43-53	Electrocatalytic oxidation of glyoxalate in alkaline medium on platinum adatom electrodes	P. Ocon and J. Gonzalez Velasco
54-61	The effects of metallic impurities and 2-butyne-1,4-diol on zinc electrowinning from chloride solutions	M. Sider and D. L. Piron
62-74	Applicability of four recent models to the discharge behaviour of different phases of MnO₂ in alkaline and acidic/neutral electrolytes	Buqui D. Desai, R. A. S. Dhume and V. N. Kamat Dalal
75-79	Influence of the substrate on the rate of aluminium loss in molten cryolite	J. M. Tellenbach and D. Landolt
80-85	Electrochemical studies of titanium in fluoride-chloride molten salts	Chen Guang-Sen, Masazumi Okido and Takeo Oki
86-91	A kinetic study on the corrodability of anodic oxide films formed on molybdenum in NaOH solutions	A. G. Gad-Allah, H. A. Abd El-Rahman and M. M. Abou-Romia
92-95	Polyaniline: characterization as a cathode active material in rechargeable batteries in aqueous electrolytes	N. L. D. Somasiri and A. G. Macdiarmid
96-103	Calculation of the current density distribution in an amalgam electrolyser by the finite element method	Michal Šimek and Ivo Roušar
104-108	The transient behaviour of a class of semicontinuous tank electrolysers	Thomas Z. Fahidy
109-115	Nickel catalysed electrosynthesis of anti-inflammatory agents. Part I — Synthesis of aryl-2 propionic acids, under galvanostatic conditions	J. F. Fauvarque, A. Jutand and M. Francois
116-119	Nickel catalysed electrosynthesis of anti-inflammatory agents. Part II — Monitoring of the electrolyses by HPLC analysis. Role of the catalyst	J. F. Fauvarque, A. Jutand, M. Francois and M. A. Petit
120-127	Experimental determination of the factors affecting zinc electrowinning efficiency	A. C. Scott, R. M. Pitblado, G. W. Barton and A. R. Ault
128-133	Mass transfer to planar and expanded metal electrodes in bubble columns	S. Piovano, O. N. Cavatorta and U. Böhm
134-141	The electrodeposition of gallium from synthetic Bayer-process liquors	R. Dorin and E. J. Frazer
142-148	Polarization of lead-tin alloys in sulphuric acid	M. N. C. Ijomah
149-153	Fractional-factorial design of a porous-carbon fuel-cell electrode	A. M. Kannan, A. K. Shukla and A. Hamnett
154-161	Crystal structure and morphology of electrodeposited zinc-iron binary alloys	K. Kondo, S. Hinotani and Y. Ohmori
162-165	Experiments on copper recovery in a pulsed granular fixed bed electrode	F. Coeuret and M. Paulin
166	Book review	G. H. Kelsall
167	Bulletin of electrochemistry	A. A. Wragg
168-171	Calendar
172	News item

Volume 18, Number 2 / March 1988

173-177	Mixed conduction and oxygen permeation in the substituted oxides for CaTiO₃	H. Iwahara, T. Esaka and T. Mangahara
178-182	Anodic oxidation of high modulus carbon fibres in sulphuric acid	E. Fitzer, H. Jäger, N. Popovska and F. Von Sturm
183-187	Competitive oxidation of formaldehyde and formate on amorphous copper-palladium-zirconium alloy electrodes in alkaline media	Katsunori Nishimura, Keiiti Yamaguti, Ken-Ichi Machida and Michio Enyo
188-195	Interpretation of the output signal from a zirconia oxygen sensor operating under applied current	P. T. Whelan and W. E. Borbidge
196-199	Natural convection mass transfer at conical surfaces	A. M. Ahmed and G. H. Sedahmed
200-204	Electrodeposition of copper on Cu−Zr metallic glass substrates	M. Shekhar Kumar and S. Nageswar
205-210	Electrochemical investigation on prostaglandin F_2α derivatives. I. Anodic iodination of prostaglandin F_2α and its methylesther	E. Szebényi-Győri, A. Vélin-Prikidánovics, V. Kovács-Mindler and L. Galambos
211-214	Free lewis acid effects in electrolytes for Li/SOCl₂ cells	A. J. Hills and N. A. Hampson
215-219	Some effects of the addition of cobalt to the nickel hydroxide electrode	R. D. Armstrong, G. W. D. Briggs and E. A. Charles
220-224	A new bath for the electrodeposition of aluminium. III. The electrochemical behaviour of the rotating aluminium disc electrode in pure AlCl₃/THF-toluene solutions	W. A. Badawy and B. A. Sabrah
225-231	Corrosion inhibition study of a carbon steel in acidic media containing hydrogen sulphide and organic surfactants	N. Pebere, M. Duprat, F. Dabosi, A. Lattes and A. De Savignac
232-239	Nernstian behaviour of zirconia oxygen sensors incorporating composite electrodes	S. P. S. Badwal, F. T. Ciacchi and J. W. Haylock
240-244	Oxidation of formic acid at a high surface area supported platinum modified by foreign metal adatoms	LJ. V. Minevski and R. R. Adžić
245-251	Use of the Nasicon/Na₂SO₄ couple in a solid state sensor for SO_x (x=2,3)	R. Akila and K. T. Jacob
252-256	The effect of thiourea on zinc electrowinning from industrial acid sulphate electrolyte	D. J. MacKinnon, J. M. Brannen and R. M. Morrison
257-267	Corrosion par piqûres des alliages d'aluminium 5083-H321 et 6061-T651	Mimoun Elboujdaini, Edward Ghali and André Galibois
268-279	Passive films on magnesium anodes in primary batteries	B. V. Ratnakumar
280-287	Evaluation of asbestos composite separators in advanced water test electrolysers	E. Montoneri
288-291	Electrolytic recovery of copper from dilute solutions considering environmental measures	Esref Avci
292-297	Electrodeposition of catalytically active nickel powders from electrolytes of various anionic compositions	R. M. Khalil
298-303	Catalytic effects of the silver ion on the indirect electrochemical oxidation of toluene to benzaldehyde using Ce³⁺/Ce⁴⁺ as mediator	Jiin-Jiang Jow and Tse-Chuan Chou
304-311	L'électrodissolution d'une poudre de galène en milieu d'acétate d'ammonium et d'acide chlorhydrique	G. Deschênes and E. Ghali
312-313	Evidence for anodization kinetics of molybdenum as a valve metal in buffer solutions of pH 9.3	A. G. Gad-Allah and H. A. Abd El-Rahman
314-316	Insoluble anode of α-lead dioxide coated on titanium for electrosynthesis of sodium perchlorate	N. Munichandraiah and S. Sathyanarayana
317	Techniques in electrochemistry, corrosion and metal finishing — A handbook
318-322	Calendar

Volume 18, Number 3 / May 1988

323-332	A voltammetric study of galena immersed in acetate solution at pH 4.6	M. D. Pritzker and R. H. Yoon
333-338	Electrochemical behaviour of viologen-cyclodextrin inclusion complexes. The case of non-alkyl group substituted viologen	A. Yasuda and J. Seto
339-346	High-rate electrochemical copper deposition on bars	L. J. J. Janssen
347-356	Electrocatalytic methods for determination of organic impurities and cations of certain metals in natural, drinking and sewage water	V. E. Kazarinov, V. S. Bagotzky, Yu. B. Vassiliev and O. A. Khazova
357-362	Electrochemical solar cells with polypyrrole-coated CdSe sintered electrodes	K. Jackowska and H. Ti Tien
363-367	Contrôle de l'imprégnation électrochimique d'une électrode d'hydroxyde de nickel par relaxation de potentiel et mesure d'impédance	B. Lafage, M. Comtat and R. Routie
368-373	Preparation and characterization of surface modified electrodes from hydroxyanthraquinones	S. I. Bailey, I. M. Ritchie, N. Searcy and P. Singh
374-383	Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation	Claude Deslouis, Bernard Tribollet, Guiliano Mengoli and Marco M. Musiani
384-393	Electrochemical behaviour of copper in neutral aerated chloride solution. II. Impedance investigation	Claude Deslouis, Bernard Tribollet, Guiliano Mengoli and Marco M. Musiani
394-400	Influence de la pulsation liquide sur le comportement d'un réacteur électrochimique constitué par un lit de particules conductrices. I. Transfert de matière	A. Ratel, P. Duverneuil and G. Lacoste
401-404	Characteristics of a poly(ethylene oxide)-LiBF₄ polymer electrolyte	F. Croce, R. Curini, S. Pantaloni, S. Passerini and A. Selvaggi, et al.
405-409	Indirect electrochemical epoxidation of hexene in a liquid-liquid electrolyte	Richard Alkire and Jürgen Köhler
410-416	Performance and impedance studies of thin, porous molybdenum and tungsten electrodes for the alkali metal thermoelectric converter	B. L. Wheeler, R. M. Williams, B. Jeffries-Nakamura, J. L. Lamb and M. E. Loveland, et al.
417-421	Electrochemical behaviour of the Cr(II)/Cr(III) couple on silver, silver amalgam and silver-based mercury film electrodes	L. M. Yudi, A. M. Baruzzi and V. M. Solis
422-430	Study of the effect of electrode resistance on current density distribution in cylindrical electrochemical reactors	J. M. Bisang and G. Kreysa
431-440	Polymer-coated electrodes: cyclic voltammetry and chronoamperometry of non-ideal systems — the anodic oxidation of poly(4-vinyl-triphenylamine) films	Richard G. Compton, Mark E. Laing, Antony Ledwith and Ideisan I. Abu-Abdoun
441-446	Nature and stability of anodic oxide films formed on molybdenum in chloride solutions	A. G. Gad-Allah and H. A. Abd el-Rahman
447-453	Electrochromic properties of polycrystalline thin films of tungsten trioxide prepared by chemical vapour deposition	O. Bohnke, C. Bohnke, A. Donnadieu and D. Davazoglou
454-458	Electroreduction of nitrate ions in concentrated sodium hydroxide solutions at lead, zinc, nickel and phthalocyanine-modified electrodes	H. -L. Li, J. Q. Chambers and D. T. Hobbs
459-462	Mono- and multilayer formation studies on silver anodic film formation of silver bromide	S. Jaya, T. Prasada Rao and G. Prabhakara Rao
463-468	Electrochemical etch-stop control for silicon structures containing electronic components	R. L. Gealer, R. H. Hammerle, H. Karsten and H. S. Wroblowa
469-472	Potential and current distributions along resistive electrodes	H. S. Wroblowa, R. H. Hammerle and R. L. Gealer
473-483	Current efficiency in aluminium reduction cells	Å. Sterten
484-490	Electrochemical behavior of pyrite in sulfuric acid solutions containing silver ions	J. B. Hiskey and M. D. Pritzker
491-492	Chlorination of toluene by two-phase electrolysis	Masayuki Morita, Shinji Yamamoto and Yoshiharu Matsuda
493-497	Calendar

Volume 18, Number 4 / July 1988

499-503	Analysis of primary and secondary current distributions in a wedge-type aluminum-air cell	Robert F. Savinell and George G. Chase
504-510	A consideration of circulating bed electrodes for the recovery of metal from dilute solutions	K. Scott
511-520	Characterization of electrochemically formed thin layers of binary alloys by linear sweep voltammetry	V. D. Jović, R. M. Zejnilović, A. R. Despić and J. S. Stevanović
521-526	Zinc-manganese dioxide galvanic cell using zinc sulphate as electrolyte. Rechargeability of the cell	Takayuki Shoji, Masakazu Hishinuma and Takakazu Yamamoto
527-531	Oxygen ion conductivity of the ceria-samarium oxide system with fluorite structure	Hidenori Yahiro, Yukari Eguchi, Koichi Eguchi and Hiromichi Arai
532-537	Influence of oxide bond energies on the kinetics of chemical dissolution of anodic oxides on valve metals	A. G. Gad-Allah, H. A. Abd El-Rahman and M. M. Abou-Romia
538-545	Study of the electrooxidation of 1,3-propanediol on a gold electrode in basic medium	C. Alonso and J. Gonzalez-Velasco
546-554	The electrochemical production of hydrogen using a carbonaceous fuel as an anode depolarizer	R. L. Clarke, P. C. Foller and A. R. Wasson
555-560	Valve metal behaviour of bismuth in NaOH	A. A. Mazhar, F. El-Taib Heakal and M. A. Ameer
561-567	Films minces de Co₃O₄ et NiCo₂O₄ obtenus par nébulisation réactive (spray) pour l'électrocatalyse. I. Préparation et analyses physiques	M. Hamdani, J. F. Koenig and P. Chartier
568-576	Films minces de Co₃O₄ et NiCo₂O₄ obtenus par nébulisation réactive (spray) pour l'électrocatalyse. II. Etude par voltampérométrie cyclique	M. Hamdani, J. F. Koenig and P. Chartier
577-582	Electrooxidation of methanol on platinum bonded to the solid polymer electrolyte, Nafion	Akiko Aramata, Takuro Kodera and Makihiko Masuda
583-589	Effects of certain impurities on zinc electrowinning in high-purity synthetic solutions	A. R. Ault and E. J. Frazer
590-594	Simulation of the tubular positive electrode of the lead-acid battery	K. M. Lin, Y. Y. Wang and C. C. Wan
595-600	Studies on the microstructure of the positive lead-acid battery plate and its electrochemical reactivity	Joji Yamashita and Yuji Matsumaru
601-607	Behavior of the corrosion potential and corrosion current of Cu-Ni alloys under erosion corrosion conditions. Effect of oxygen	Pierre R. Roberge and Réjean Beaudoin
608-613	Response rate techniques for zirconia-based Nernstian oxygen sensors	S. P. S. Badwal, M. J. Bannister, F. T. Ciacchi and G. A. Hooshmand
614-618	Nucleation and growth kinetics of Ag₇NO₁₁ on a platinum single crystal electrode	E. Michailova and A. Milchev
619-624	A photoassisted rechargeable cell with a polymer modifiedp-InP semiconductor anode and a polypyrrole cathode	Steven Holdcroft and B. Lionel Funt
625-632	Properties of surface layers formed on lithium in Li-SOCl₂ cells: synergetic effect of SO₂ and LiAl(SO₃Cl)₄	P. Chenebault, D. Vallin, J. Thevenin and R. Wiart
633-638	Depolarization of the hydrogen evolution reaction on cadmium electrodes in alkaline media	S. B. Saidman, J. R. Vilche and A. J. Arvia
639-643	Electrochemical determination of current efficiency for aluminium deposition on solid substrates from cryolitic melts	J. M. Tellenbach and D. Landolt
644-652	The electrodeposition of chromium from chromium(III) solutions — a study using microelectrodes	J. N. Howarth and D. Pletcher
653-656	Corrosion of stainless steel (AISI 316) in molten sodium polysulphide under applied potential	Reinhard Knödler
657-665	Double channel electrodes and the measurement of heterogeneous reaction rates at the solid-liquid interface	Richard G. Compton, Geoffrey M. Stearn, Patrick R. Unwin and Anthony J. Barwise
666-667	A simple and versatile rotating disk electrode design for use in studies of electroless plating	S. W. Orchard
668-671	Calendar

Volume 18, Number 5 / September 1988

673-678	Electrochemical preparation of amorphous Fe-P alloys	St. Vitkova, M. Kjuchukova and G. Raichevski
679-686	Kinetics of formic acid oxidation in advanced porous electrodes	Rudolf Holze and Ana-Maria Castro Luna
687-690	Mediated electrochemical reduction of dibromonorcarane in an emulsified system using Cr(II)	L. M. Yudi, A. M. Baruzzi and V. M. Solis
691-698	Comparative voltammetric behaviour of the silver/silver oxide electrode prepared on vitreous carbon and silver substrates	M. López Teijelo, J. R. Vilche and A. J. Arvia
699-704	Estimation of current efficiency in ion-exchange membrane chlor-alkali cells	B. V. Tilak, S. R. Fitzgerald and C. L. Hoover
705-709	Solid electrolyte cells with a copper ion conductor Rb₄Cu₁₆I₇Cl₁₃. IV. Mixed-phase cathodes containing metal oxides	K. Kuwabara, K. Hanafusa and K. Sugiyama
710-714	Enhanced mass transfer to a rotating cylinder electrode with axial flow	A. Eklund and D. Simonsson
715-723	Heat treatment of amorphous electrochromic WO₃ thin films deposited onto indium-tin oxide substrates	Cl. Bohnke and O. Bohnke
724-730	An experimental technique employing a high-temperature gas-tight alumina seal for the assessment of the electrical properties of solid electrolytes	M. J. U. T. Van Wijngaarden, J. M. A. Geldenhuis and R. J. Dippenaar
731-738	Aluminium dissolution in NaF-AlF₃-Al₂O₃ systems	E. Sum and M. Skyllas-Kazacos
739-744	Electrochemical characterization of electrodeposited chromium and nickel-chromium layers on a steel substrate	A. Bodin, P. J. B. Overkamp and J. H. W. De Wit
745-750	Investigation of tellurium electrocrystallization by EHD impedance technique	C. Deslouis, G. Maurin, N. Pebere and B. Tribollet
751-756	A rechargeable battery of the type polyaniline/propylene carbonate-LiClO₄/Li-Al	E. M. Genies, P. Hany and Ch. Santier
757-762	Influence of H₂O, CO₂ and various combustible gases on the characteristics of a limiting current-type oxygen sensor	Keiichi Saji, Haruyoshi Kondo, Hideaki Takahashi, Takashi Takeuchi and Isemi Igarashi
763-767	Oxygen reduction on platinum in mixtures of phosphoric and trifluoromethane sulphonic acids	M. A. Enayetullah, E. J. M. O'Sullivan and E. B. Yeager
768-780	Laminar radial flow electrochemical reactors. I. Flow fields	F. B. Thomas, P. A. Ramachandran, M. P. Dudukovic and R. E. W. Jansson
781-790	The role of hydrous oxide in the electrochemical behaviour of platinum	L. D. Burke, M. B. C. Roche and W. A. O'Leary
791	Book reviews	Laurence Peter
792-795	Calendar

Volume 18, Number 6 / November 1988

799-806	Hydrogen production during zinc deposition from alkaline zincate solutions	R. E. F. Einerhand, W. H. M. Visscher and E. Barendrecht
807-814	Stepwise decreasing current modes. I. Electrodeposition of metals from a bath with insoluble anode and limited volume of solution	M. D. Maksimović, K. I. Popov and LJ. N. Nikolić
815-822	In situ activation of cobalt cathodes in alkaline water electrolysis	J. Y. Huot and L. Brossard
823-830	The electrodeposition of improved molybdenum coatings from molten salts by the use of electrolyte additives	Georges J. Kipouros and Donald R. Sadoway
831-838	A.c. corrosion of nickel in sulphate solutions	T. C. Tan and D. T. Chin
839-848	Electrochemistry of anodic F₂ evolution at carbon electrodes: Bubble adherence effects in the kinetics at rotating cone electrodes	Lijun Bai and B. E. Conway
849-852	On the electrochemical behaviour of the anodic oxide film on tungsten in HCOOH and CH₃COOH solutions	M. M. Hefny, A. S. Mogoda and G. A. El Mahdy
853-856	The performance of porous and gauze electrodes in electrolysis with parabolic velocity distribution	Roman E. Sioda and Thomas Z. Fahidy
857-862	Electrochemical characteristics and structural changes of molybdenum trioxide hydrates as cathode materials for lithium batteries	Naoaki Kumagai, Nobuko Kumagai and Kazuo Tanno
863-868	Effects of anode-cathode distance on the cell potential and electrical bath resistivity in an aluminium electrolysis cell with a sloping TiB₂ composite cathode	Djen Kasherman and Maria Skyllas-Kazacos
869-875	Application of the accelerated Tafel plot technique to corrosion kinetics: Role of double layer through simulation	V. Yegnaraman, C. Ahmed Basha and G. Prabhakara Rao
876-884	Electrochemical study of catalytic oxidation of naphthalene in molten sulphate pyrosulphate at 425° C with vanadium pentoxide	M. S. Medimagh and M. L. Bouguerra
885-893	Electrochemical oxidation and polymerization ofN-vinyl-thionaphthene-indole	G. Casalbore-Miceli, G. Beggiato, S. S. Emmi, A. Geri and S. Daolio
894-898	The effect of temperature on the water electrolysis reactions on nickel and nickel-based codeposits	A. C. Ferreira, E. R. Gonzalez, E. A. Ticianelli, L. A. Avaca and B. Matvienko
899-903	A reaction model for the electrochemical production of p-anisidine	J. M. T. Clark, F. Goodridge and R. E. Plimley
904-908	Electro-oxidation of sodium lauryl sulfate aqueous solutions	F. Vigo, C. Uliana and M. Novi
909-914	A rechargeable redox battery utilizing ruthenium complexes with non-aqueous organic electrolyte	Y. Matsuda, K. Tanaka, M. Okada, Y. Takasu and M. Morita, et al.
915	Book reviews	D. J. Schiffrin
916-919	Calendar
919	News item

Volume 19, Number 1 / January 1989

1-9	A high performance molten carbonate fuel cell cathode	Mark Franke and Jack Winnick
10-18	Stibine and arsine generation from a lead-acid cell during charging modes under a utility load-leveling duty cycle	R. Varma, Z. Tomczuk, S. Kazadi and N. P. Yao
19-27	Heat-treated polyacrylonitrile-based catalysts for oxygen electroreduction	S. Gupta, D. Tryk, I. Bae, W. Aldred and E. Yeager
28-36	Electrocatalyse de la réduction de l'oxygène sur oxyde mixte: Cu_1+xMn_2−xO₄ en milieu alcalin. Etude par électrode disque-anneau	J. L. Gautier, A. Restovic and P. Chartier
37-42	Effect of iron(III) and lead(II) on the quality of copper electrodeposited from a pyrophosphate bath	D. De Filippo, L. Dessi' and A. Rossi
43-50	Flow-through and flow-by porous electrodes of nickel foam. I. Material characterization	S. Langlois and F. Coeuret
51-60	Flow-through and flow-by porous electrodes of nickel foam. II. Diffusion-convective mass transfer between the electrolyte and the foam	S. Langlois and F. Coeuret
61-64	Effect of impurities on gallate reduction in alkaline solution — a linear stripping voltammetry study	A. Varadharaj, R. Srinivasan and G. Prabhakara Rao
65-68	Al/Cl₂ battery with slightly acidic NaCl electrolyte. I. Porous graphite chlorine cathodes	J. -F. Equey, S. Müller, A. Tsukada and O. Haas
69-75	Length distribution of aluminum etch tunnels	Theodore R. Beck, Hidenori Uchi and Kurt R. Hebert
76-82	Diffusion and migration in the electropolishing and anodic dissolution of metals	K. Kontturi and D. J. Schiffrin
83-89	Chemical and electrochemical inhibition studies of corrosion and hydrogen surface embrittlement. I. Fe_0.78B_0.13Si_0.09 amorphous alloy in molar HCl	S. Kertit, J. Aride, A. Ben-Bachir, A. Sghiri and A. Elkholy, et al.
90-94	Estimation of optimum anode geometry in chlor-alkali membrane cells	Y. Nishiki, S. Nakamatsu, K. Aoki and K. Tokuda
95-99	On the conductivity of phosphoric acid electrolyte	Der-Tau Chin and Howard H. Chang
100-104	Mass transfer to volumetric electrodes with two-phase flow	L. Coppola, O. N. Cavatorta and U. Böhm
105-107	Efficient oxygen reduction in alkaline solution with platinum phthalocyanine on porous carbon	A. K. Shukla, C. Paliteiro, R. Manoharan, A. Hamnett and J. B. Goodenough
108-112	Electrochemical measurements of mass transfer coefficients in a cell simulating tooth canals	J. Nanzer, S. Langlois and F. Coeuret
113-115	Measurement of the diffusivity of maleic acid by the rotating disc electrode technique	V. G. Gurjar and I. M. Sharma
116-119	A population balance approach to the study of bubble behaviour at gas-evolving electrodes	A. W. Bryson and D. L. Hofman
120-121	Book reviews	Peter C. Foller, Michel Armand and P. N. Bartlett
123-126	Calendar
126	News items

Volume 19, Number 2 / March 1989

127-135	The discharge behaviour of the porous lead electrode in the lead-acid battery. I. Experimental investigations	P. Ekdunge and D. Simonsson
136-141	The discharge behaviour of the porous lead electrode in the lead-acid battery. II. Mathematical model	P. Ekdunge and D. Simonsson
142-146	Cycling of electrodeposited beta lead dioxide	M. Maja and N. Penazzi
147-151	Al/Cl₂ battery with slightly acidic NaCl electrolyte. II. Ti-Ti/Ru oxide chlorine cathodes	J. -F. Equey, S. Müller, A. Tsukada and O. Haas
152-156	Decomposition of citrate in electroless CoP baths	J. Horkans, W. Ng, M. M. Plechaty, U. Stimming and J. B. Mahlke
157-161	Organic electrolytes for corrosion testing of aluminium and Al-Li binary alloys	F. Dalard and A. B. Rais
162-166	New solid polymer electrolyte composites for water electrolysis	P. Millet, M. Pineri and R. Durand
167-173	Ionic conductivity of perfluorinated ionomer solutions and gels	M. Guglielmi, P. Aldebert and M. Pineri
174-182	Evaluation of mass transport in copper and zinc electrodeposition using tracer methods	H. M. Wang, S. F. Chen, T. J. O'Keefe, M. Degrez and R. Winand
183-187	Computation of primary current distribution and cell resistance at model electrodes with circular perforations	Koichi Aoki and Yoshinori Nishiki
188-194	The influence of mass transport on the deposit morphology and the current efficiency in pulse plating of copper	O. Chène and D. Landolt
195-202	Transient regime in a parallelepipedic cell induced by a current or a potential step	F. Lapicque, J. M. Hornut, A. Louchkoff and A. Storck
203-206	Characterization of aluminium alloys in tetrahydrofuran media	A. Faure-Geors, F. Dalard and A. B. Rais
207-212	Electrochemical investigation on prostaglandin F_2α derivatives. II. Cathodic reduction of the iodinated prostaglandin F_2α and its methyl ester	E. Szebényi-Györi, A. Vélin-Prikidánovics, V. Kovács-Mindler, B. Podányi and G. Galambos
213-218	Formation and dissolution of anodic oxide films on zirconium in NaOH: Kinetic studies	A. G. Gad Allah, A. A. Mazhar, F. El-Taib Heakal and M. A. Ameer
219-224	Effect of surfactants on the rate of mass transfer at gas-evolving electrodes	A. M. Ahmed and G. H. Sedahmed
225-230	The development of cerium oxide coatings from cryolite melts. A self-forming anode for aluminum electrowinning	J. K. Walker, J. Kinkoph and C. K. Saha
231-238	Dissolution of tin in the presence of Cl⁻ ions at pH 4	M. Drogowska, L. Brossard and H. Ménard
239-246	Cyclic chronopotentiometric studies of the LiAl anode in methyl acetate	Y. S. Fung and H. C. Lai
247-254	A model for bipolar current leakage in cell stacks with separate electrolyte loops	Min-Zhi Yang, Han Wu and J. Robert Selman
255-262	Hydrogen evolution on iridium oxide cathodes	J. C. F. Boodts and S. Trasatti
263-270	Axial dispersion in electrolyte flow through anisotropic packed beds	P. Legentilhomme, J. Legrand and J. Comiti
271-274	Studies of the kinetics of aluminium incorporation into an iron electrode in molten salts by linear sweep voltammetry	F. Lantelme, E. Cherrat, Y. Chryssoulakis and S. Kalogeropoulou
275-280	Aluminium electrodeposition from AlCl₃-NaCl melts on glassy carbon, platinum and gold electrodes	V. D. Jović and J. N. Jovićević
281-286	A numerical method of calculating secondary current distributions in electrochemical cells	Akira Katagiri and Yoshinori Miyazaki
287-289	Improvement of the discharge capacity of the alkaline MnO₂-Zn cell by using graphite intercalation compounds with CrO₃	J. M. Skowroński
290-292	Viscosity measurements of low temperature molten salts	Francis M. Donahue and John F. Ross
293-295	Preparation of pyrazine 2,3-dicarboxylic acid from its potassium salt by electrodialysis	P. Sridhar and R. Palaniappan
296-300	Calendar
300	News items

Volume 19, Number 3 / May 1989

301-310	Some electrochemical features of thein vivo corrosion of dental amalgams	M. J. Gross and J. A. Harrison
311-316	Removal of chromium from aqueous solutions by treatment with porous carbon electrodes: Electrochemical principles	Daniel Golub and Yoram Oren
317-322	Electrochemical behaviour of AISI 321 stainless steel in methanol-H₂SO₄ mixtures	V. K. Singh and V. B. Singh
323-330	Investigations of a large-capacity medium-power saline aluminium-air battery	E. Budevski, I. Iliev, A. Kaisheva, A. Despić and K. Krsmanović
331-335	Organic/inorganic electrodes (ORINELs) with continuous phase components	B. Aurian-Blajeni, S. C. Holleck and B. H. Jackman
336-340	Dual solution-type HCHO fuel cell systems using an anion exchange resin membrane with electroless-plated Cu or Pd anode	Keiiti Yamaguti, Ken-Ichi Machida, Michio Enyo, Kiyohide Yoshida and Takashi Mori
341-344	Chemical modification of carbon fibres by esterification —optimization of fibre pretreatment	P. D. Jannakoudakis, A. D. Jannakoudakis, E. Theodoridou and J. O. Besenhard
345-348	Scale-up of electrocarboxylation reactions with a consumable anode	J. Chaussard, M. Troupel, Y. Robin, G. Jacob and J. P. Juhasz
349-353	Electrochemical synthesis of 3-amino-4-hydroxybenzoic acid in aqueous base	K. J. Stutts, C. L. Scortichini, T. D. Gregory, S. J. Babinec and C. M. Repucci, et al.
354-360	An experimental study of anodic dissolution of copper in aqueous sodium chloride via laser-induced image processing	Z. H. Gu and T. Z. Fahidy
361-367	Preparation of polycrystalline thin films of CuInSe₂ by electrodeposition	D. Pottier and G. Maurin
368-376	Active-passive behaviour and stress corrosion cracking of A516 steel in Bayer solution	Huy Ha Le and Edward Ghali
377-382	Factors influencing the preferential orientations in zinc coatings electrodeposited from chloride baths	I. Tomov, Chr Cvetkova, V. Velinov, A. Riesenkampf and B. Pawlik
383-386	A Nafion^®-bound platinized carbon electrode for oxygen reduction in solid polymer electrolyte cells	A. K. Shukla, P. Stevens, A. Hamnett and J. B. Goodenough
387-393	Synergistic effects of adsorbed species on the surface morphology and crystal orientation of electrodeposited tin	Norio Kaneko and Hiroyuki Nezu
394-400	Studies on nonisothermal solid state galvanic cells — effect of gradients on EMF	S. K. Ramasesha and K. T. Jacob
401-409	Electrocoating of iron and other metals with polypyrrole	M. Schirmeisen and F. Beck
410-412	Ca₁₂Al₁₄O₃₃ — A possible high-temperature moisture sensor	J. T. S. Irvine and A. R. West
413-420	Impedance analysis of the lithium discharge in Li-SOCl₂ cells: Synergetic effect of SO₂ and LiAl(SO₃Cl)₄	P. Chenebault, D. Vallin, J. Thevenin and R. Wiart
421-428	Electrochemical studies of lithium-boron alloys in non-aqueous media — comparison with pure lithium	P. Sanchez, C. Belin, C. Crepy and A. de Guibert
429-433	Nickel hydroxide film electroformation in alkaline chloride solutions	M. R. Gennero de Chialvo and A. C. Chialvo
434-442	Electrochemically initiated (co)polymerization of acrylamide and acrylonitrile on a steel cathode—electrochemical and impedance study	T. Grchev and M. Cvetkovska
443-447	A rapid test to determine the state of an electrochemical process	Thomas Z. Fahidy
448-452	High-temperature C₁-gas fuel cells using proton-conducting solid electrolytes	H. Iwahara, H. Uchida, K. Morimoto and S. Hosogi
453-455	Electrolytic resistance at a hydrogen-evolving nickel wire electrode	J. -Y. Huot
456-458	On the electrochemically induced release of dioxygen from cobalt(II) complexes	James H. Cameron, Steven Turner and Peter C. Morgan
459-461	Oxidation of phenol to benzoquinone in a CSTER with modulated alternating voltage	D -T. Chin, N. R. K. Vilambi and C. Y. Cheng
462-464	Electrocatalytic oxidation of methanol on platinum dispersed in polyaniline conducting polymers	P. Ocon Esteban, J. -M. Leger, C. Lamy and E. Genies
465-466	Electroreduction of nitrobenzene to p-aminophenol at a TiO₂/Ti electrode	C. Ravichandran, S. Chellammal and P. N. Anantharaman
467-468	Book reviews	G. H. Kelsall and M. G. Hocking
469-473	Calendar

Volume 19, Number 4 / July 1989

473	Editorial	A. A. Wragg
475-484	Factors affecting the functioning of solid state fluoride galvanic cells	A. M. Azad and O. M. Sreedharan
485-494	Aluminium dissolution in the NaF-AlF₃-Al₂O₃ system: Effects of alumina, temperature, gas bubbling and dissolved metal	E. Sum and M. Skyllas-Kazacos
495-499	Voltage delay during constant-current or constant-resistance discharge of Mg-MnO₂ dry cells: A comparative study	S. R. Narayanan and S. Sathyanarayana
500-504	The effect of metal and solution phase resistances on the current distribution in cylindrical electrochemical reactors	José M. Bisang
505-511	The distribution of voltage losses among components of a battery	Hiram Gu
512-518	Chemical and electrochemical inhibition studies of corrosion and hydrogen surface embrittlement. II. Fe_0.81B_0.13Si_0.04C_0.02 amorphous alloy in molar HCl	A. Elkholy, M. Etman, S. Kertit, J. Aride and A. Ben-Bachir, et al.
519-530	Ni and Mo coatings as hydrogen cathodes	J. Divisek, H. Schmitz and J. Balej
531-534	Approximate analytical design procedures for plug flow electrochemical reactors	Keith Scott
535-539	Biomass electrochemistry: Anodic oxidation of an organo-solv lignin in the presence of nitroaromatics	Carmen Smith, James H. P. Utley, Mirella Petrescu and Hans Viertler
540-546	Growth of electrodeposited γ-manganese dioxide from a suspension bath	E. Preisler
547-551	Characterisation of different grades of commercially pure aluminium as prospective galvanic anodes in saline and alkaline battery electrolyte	I. John Albert, M. Anbu Kulandainathan, M. Ganesan and V. Kapali
552	Foreword to the following eight papers	E. Barendrecht and H. Wendt
553-558	Separators for acidic and alkaline batteries	K. Rühling and A. Winsel
559-565	Material problems encountered in anodic MnO₂ deposition	E. Preisler
566-570	Material properties of cation exchange membranes for chloralkali electrolysis, water electrolysis and fuel cells	T. Asawa
571-579	Mass transfer and structure of asbestos and non-asbestos diaphragms for chlorine and caustic production	IR. J. H. G. Van Der Stegen
580-588	Evaluation of cathode material properties relevant to the life of Hall-Heroult cells	M. Sørlie and H. A. Øye
589-595	Material problems in the three versions of chloralkali electrolysis	Peter Kohl and K. Lohrberg
596-604	Material problems in electrowinning of aluminium by the Hall-Heroult process	S. Wilkening and G. Winkhaus
605-610	Ceramic diaphragms for advanced alkaline water electrolysis	H. Wendt and H. Hofmann
611-613	Calendar

Volume 19, Number 5 / September 1989

615	Editorial	A. A. Wragg
617-629	Potential drops due to an attached bubble on a gas-evolving electrode	C. Gabrielli, F. Huet, M. Keddam, A. Macias and A. Sahar
630-636	Electrode current distribution in a hypochlorite cell	L. R. Czarnetzki and L. J. J. Janssen
637-648	Distribution of mass transfer over a 0.5-m-tall hydrogen-evolving electrode	H. F. M. Gijsbers and L. J. J. Janssen
649-656	Role of gas bubbles adsorbed on a carbon electrode: electroreduction of chlorine gas in fused salts	F. Lantelme, H. Alexopoulos and O. Haas
657-667	The vertical distribution of current in a gas-evolving membrane cell	A. D. Martin and A. A. Wragg
668-676	Measurement of bubble nucleation rates by an acoustic method	S. D. Lubetkin
677-682	Modelling of gas-evolving electrolysis cells. II. Investigation of the flow field around gas-evolving electrodes	M. Kuhn and G. Kreysa
683-696	Investigation of water electrolysis by spectral analysis. I. Influence of the current density	C. Gabrielli, F. Huet, M. Keddam and A. Sahar
697-702	New electrodes for oxygen evolution in acidic solution	P. A. Dykstra, G. H. Kelsall, X. Liu and A. C. C. Tseung
703-712	Gas induced bath circulation in aluminium reduction cells	A. Solheim, S. T. Johansen, S. Rolseth and J. Thonstad
713-719	Mechanisms of mass transfer of dissolved gas from a gas-evolving electrode and their effect on mass transfer coefficient and concentration overpotential	H. Vogt
720-728	Modelling of gas-evolving electrolysis cells. III. TheiR drop at gas-evolving electrodes	M. Kuhn and G. Kreysa
729-735	Analysis of molten industrial silicates by electrochemical techniques	B. Lafage and P. Taxil
736-743	Mass transfer to percolated porous materials in a small-scale cell operating by self-pumping	S. Langlois, J. O. Nanzer and F. Coeuret
744-751	The interaction of pyrite with solutions containing silver ions	A. N. Buckley, H. J. Wouterlood and R. Woods
752-757	Orientation distributions by recovery behaviour in electrodeposited copper layers at room temperature	SV. Surnev and I. Tomov
758-767	The importance of superficial (adatom) surface oxidation in the electrocatalytic behaviour of noble metals in aqueous media	L. D. Burke and W. A. O'Leary
768-776	Stability of anodic tantalum oxide films in NaOH solutions	A. G. Gad Allah, W. A. Badawy and H. H. Rehan
777-783	Anodic behaviour of copper electrodes containing arsenic or antimony as impurities	Julio C. Minotas, Hocine Djellab and Edward Ghali
784-787	Calendar

Volume 19, Number 6 / November 1989

789-801	Electrochemical properties of metal-molten salt mixtures	G. M. Haarberg and J. Thonstad
802-806	The effect of a.c. superimposed on d.c. and pulsating potential on the coercivity of electrodeposited Ni-Fe alloy thin films	S. S. Djokić, M. D. Maksimović and D. Č. Stefanović
807-812	Electrochemical studies on solid state cells with mol % 70AgI-20Ag₂O-10(0.8V₂O₅-0.2P₂O₅) amorphous electrolyte and organic cathodes	P. Sathya Sainath Prasad and S. Radhakrishna
813-818	A.c. impedance of niobium triselenide cathode in secondary lithium cells	B. V. Ratnakumar, S. Di Stefano and C. P. Bankston
819-822	Electrochemical nucleation of mercury on platinum in the presence of organic additives	V. Tsakova, M. Kjuchukova and A. Milchev
823-828	Mass transfer to and copper deposition on a round bar in a new type of electrolytic cell: the helix cell	L. J. J. Janssen and J. G. Wijers
829-838	A contribution to the understanding of a.c. anodizing of aluminium	M. A. Barbosa, D. R. Gabe, D. H. Ross and I. Sutherland
839-844	Mechanism of nickel-molybdenum alloy electrodeposition in citrate electrolytes	E. Chassaing, K. Vu Quang and R. Wiart
845-855	Laminar radial flow electrochemical reactors. II. Convective diffusion of inert tracer	F. B. Thomas, P. A. Ramachandran, M. P. Dudukovic and R. E. W. Jansson
856-867	Laminar radial flow electrochemical reactors. III. Electroorganic sysnthesis	F. B. Thomas, P. A. Ramachandran, M. P. Dudukovic and R. E. W. Jansson
868-876	Voltammetric behaviour of iron in cement. I. Development of a standard procedure for measuring voltammograms	J. T. Hinatsu, W. F. Graydon and F. R. Foulkes
877-881	Studies of bipolarity in fluidized bed electrodes	J. K. Lee, L. W. Shemilt and H. S. Chun
882-888	Influence of iron impurities on the time dependence of the hydrogen evolution reaction on platinum cathodes during electrolysis of 30 w/o KOH	L. Brossard and J. -Y. Huot
889-896	An investigation of a potential step at a channel electrode	F. Lapicque, J. M. Hornut, G. Valentin and A. Storck
897-900	Electrochemical reduction of 2,3′-dinitrobenzidine in buffered aqueous methanol	S. Aravamuthan, C. Kalidas and C. S. Venkatachalam
901-910	The solubility and electrochemistry of alkali metal oxides in the molten eutectic mixture of lithium carbonate-sodium carbonate-potassium carbonate	S. H. White and U. M. Twardoch
911-921	The electrochemical regeneration of Fenton's reagent in the hydroxylation of aromatic substrates: batch and continuous processes	T. Tzedakis, A. Savall and M. J. Clifton
922-927	Anodic oxidation of benzyl alcohol to benzaldehyde in the presence of both redox mediator and phase transfer catalyst	Jing-Shan Do and Tse-Chuan Chou
928-932	Inhibition of corrosion of α-brass (Cu-Zn, 67/33) in acid chloride solutions by some amino pyrazole derivatives	A. G. Gad Allah, M. W. Badawy, H. H. Rehan and M. M. Abou-Romia
933-936	Electrodeposition of chromium from Cr (III) electrolytes in the presence of formic acid	I. Drela, J. Szynkarczuk and J. Kubicki
937-939	Electrochemical reduction of praseodymium chloride in LiCl-KCl melt	Z. -Y. Qiao, S. Duan and D. Inman
940-942	Natural convection mass transfer at expanded metal electrodes of different structures	S. Piovano and U. Böhm
943-945	Stability of zinc/bromine battery electrolytes	P. M. Hoobin, K. J. Cathro and J. O. Niere
946-948	A filter-press electrolytic cell with semi-continuous renewal of sacrifical electrodes	G. Silvestri, S. Gambino, G. Filardo and F. Tedeschi
949	Book review
950-954	Calendar

Volume 20, Number 1 / January 1990

1-10	A model of zinc-nickel alloy electrodeposition in an industrial-scale cell	M. F. Mathias, C. M. Villa and T. W. Chapman
11-16	The effect of nickel on the mechanism of the initial stages of zinc electrowinning from sulphate electrolytes. Part I. Investigations on a spectrally pure aluminium cathode	St. Rashkov, M. Petrova and Chr Bozhkov
17-22	The effect of nickel on the mechanism of the initial stages of zinc electrowinning from sulphate electrolytes. Part II. Investigations on aluminium cathodes alloyed with iron impurities	Chr Bozhkov, M. Petrova and St. Rashkov
23-25	An ac impedance study of the fractal geometry of silver films electrodeposited within a polymer matrix	R. G. Compton, A. M. Waller, H. Block and J. Chapples
26-31	Mechanism of enhancement of the corrosion of steel by alternating currents and electrocatalytic properties of cycled steel surfaces	M. L. Mateo, T. Fernandez Otero and D. J. Schiffrin
32-38	Transition metal-based hydrogen electrodes in alkaline solution — electrocatalysis on nickel based binary alloy coatings	I. Arul Raj and K. I. Vasu
39-44	Anodization of hafnium in phosphoric acid solutions	H. A. Abd El-Rahman and M. M. Abou-Romia
45-53	Nucleation and growth of anodic films on stainless steel alloys. II. Kinetics of repassivation of freshly generated metal surfaces	F. J. Graham, H. C. Brookes and J. W. Bayles
54-59	A microelectrode study of the reduction of formaldehyde in neutral concentrated aqueous solutions	M. I. Montenegro, D. Pletcher, E. A. Liolios, D. J. Mazur and C. Zawodzinski
60-68	HBr electrolysis in the Ispara Mark 13A flue gas desulphurization process: electrolysis in a DEM cell	D. van Velzen, H. Langenkamp, A. Moryoussef and P. Millington
69-76	Electrochemical dissolution of stainless steels in flow channel cells with and without photoresist masks	E. Rosset, M. Datta and D. Landolt
77-84	Electrochemical studies of zirconium and hafnium in alkali chloride and alkali fluoride-chloride molten salts	Chen Guang-Sen, Masazumi Okido and Takeo Oki
85-90	On the mechanism of electroless plating. Part 3. Electroless copper alloys	J. E. A. M. van den Meerakker and J. W. G. de Bakker
91-96	Polished carbon electrodes for improving the fluorine production process	D. Devilliers, B. Teisseyre, M. Vogler and M. Chemla
97-101	Organic electrosynthesis with a sacrificial anode. Chemical reductive degradation of the solvent N,N-dimethyl formamide	C. Saboureau, M. Troupel and J. Perichon
102-109	Redox processes at iron hydroxide layers formed on platinum substrates in alkaline solutions	M. C. Galindo, M. E. Martins, J. R. Vilche and A. J. Arvia
110-115	Simulation of hydrodynamics and inhibitor consumption in hydrometallurgical plants	M. Degrez, J. -L. Delplancke and R. Winand
116-124	Electrocatalysis of anodic oxygen-transfer reactions: alpha-lead dioxide electrodeposited on stainless steel substrates	J. Feng and D. C. Johnson
125-131	Impedance spectroscopy of the Ti(IV)/Ti(III) redox couple in the molten LiCl-KCl eutectic melt at 470°C	D. M. Ferry and G. S. Picard
132-138	Kinetic correlations in codeposition of coatings of molybdenum-iron group metal alloys	E. Bełtowska-Lehman
139-144	Electrochemical and photoelectrochemical behaviour of passivated niobium electrodes during hydrogen evolution	W. A. Badawy
145-149	Mass transfer in gas sparged membrane cells	G. H. Sedahmed, M. M. Naim and M. Y. Haridi
150-156	Influence of temperature on the electro-dissolution of tin in NaCl aqueous solution at pH4	M. Drogowska, L. Brossard and H. Ménard
157-162	Infrared reflectance absorption spectroscopy (IRRAS). Study of the thermal stability of perfluorinated sulphonic acid ionomers on Pt	D. Chu, D. Gervasio, M. Razaq and E. B. Yeager
163-165	Electrowinning of zinc from alkaline solutions at high current densities	J. St-Pierre and D. L. Piron
166-168	Book reviews	C. Boxall and A. Hamnett
169-173	Calendar
173	Call for papers

Volume 20, Number 2 / March 1990

175-185	Chemically and physically modified electrodes: some new developments	E. Barendrecht
186-195	Potential distribution and electrode stability in a bipolar electrolysis cell	J. Divisek, R. Jung and D. Britz
196-208	The effect of pulsed reverse current on the polarization behaviour of acid copper plating solutions containing organic additives	T. Pearson and J. K. Dennis
209-215	Mediated electrosynthesis with cerium (IV) in methanesulphonic acid	R. M. Spotnitz, R. P. Kreh, J. T. Lundquist and P. J. Press
216-222	Overall mass transfer in swirling decaying flow in annular electrochemical cells	P. Legentilhomme and J. Legrand
223-230	Nucleation and growth of anodic films on stainless steel alloys I. Influence of minor alloying elements and applied potential on passive film growth	H. C. Brookes, J. W. Bayles and F. J. Graham
231-234	XPS and AES studies of the composition of the viscous liquid film in the electropolishing of copper	Jing Li Fang and Nai Jun Wu
235-239	Morphological changes in the electrodes of phosphoric acid fuel cells operating under open circuit voltage conditions	V. Alderucci, E. Passalacqua, N. Giordano, P. L. Antonucci and F. Parmigiani, et al.
240-244	Exclusion of CO and CO₂ from ammonia synthesis gas by an electrocatalytic process	K. Ogura, C. T. Migita and H. Uchida
245-251	Voltammetric behaviour of platinum in aqueous solutions containing sodium hypophosphite	J. J. Podestá, R. C. V. Piatti and A. J. Arvia
252-259	Phosphate-bonded composite electrodes for hydrogen evolution	E. Potvin, H. Menard, J. M. Lalancette and Louis Brossard
260-268	Investigation of O₂ reduction in alkaline media on macrocyclic chelates impregnated on different supports: influence of the heat treatment on stability and activity	M. Savy, F. Coowar, J. Riga, J. J. Verbist and G. Bronoël, et al.
269-280	Electrogenerative oxidation of model alcohols at packed bed anodes	John C. Card, Stephen E. Lyke and Stanley H. Langer
281-288	In situ activation of nickel cathodes by sodium molybdate during alkaline water electrolysis at constant current	J. -Y. Huot and L. Brossard
289-293	Application de la voltampérométrie convolutionnele à la détermination du coefficient de diffusion des ions TiF₆³⁻ dans l'eutectique LiF−NaF−KF de 600°C a 900°C	A. Robin, J. de Lepinay and M. J. Barbier
294-300	The mobility of oxygen ions in CaF₂	R. Akila and K. T. Jacob
301-306	Theory of progressive nucleation and growth accounting for the ohmic drop in the electrolyte. I	A. Milchev and V. Tsakova
307-318	Ohmic drop and zones of reduced overpotential during the growth of small clusters	A. Milchev
319-326	Charge-discharge characteristics of polyvinylpyridinium hydrobromide perbromide-carbon paste electrodes	G. Mengoli, R. Salmaso and S. Zecchin
327-334	Electrochemical evaluation of copper deposition with gas sparging	D. A. Uceda and T. J. O'keefe
335-337	Electrochemical reduction ofo-nitrobenzaldehyde in aqueous ethanolic sulphuric acid medium	A. Susaimanickam, M. Chandrasekaran and V. Krishnan
338-340	Nickel-catalysed electrosynthesis of anti-inflammatory agents. III. A new electrolyser for organic solvents; oxidation of metal powder as an alternative to sacrificial anodes	J. F. Fauvarque, Y. De Zelicourt, C. Amatore and A. Jutand
341-342	Book reviews	A. R. Burkin and Clive Hahn
343-347	Calendar
347	Call for papers

Volume 20, Number 3 / May 1990

ii	The effect of pulsed reverse current on the polarization behaviour of acid copper plating solutions containing organic additives	T. Pearson and J. K. Dennis
347-356	The electrochemical facetting of metal surfaces: Preferred crystallographic orientation and roughening effects in electrocatalysis	W. E. Triaca and A. J. Arvia
357-364	Organic cathode materials in sodium batteries	B. V. Ratnakumar, S. Di Stefano, R. M. Williams, G. Nagasubramanian and C. P. Bankston
365-369	A mass transfer model for the autocatalytic dissolution of a rotating copper disc in oxygen saturated ammonia solutions	Z. Zembura, A. Piotrowski and Z. Kolenda
370-376	Kinetic study of the electroreduction of nitrobenzene	T. R. Nolen and P. S. Fedkiw
377-380	Effect of hydrogen on discharge behaviour of the nickel oxide electrode	Y. Jin Kim, S. Srinivasan and A. J. Appleby
381-389	On the nature of the ‘induction period’ during the electrowinning of zinc from nickel containing sulphate electrolytes	R. Wiart, C. Cachet, Chr Bozhkov and St. Rashkov
390-394	Limiting current in a high-temperature hydrogen pump with a SrCeO₃-based proton conductor	H. Uchida, H. Kimura and H. Iwahara
395-398	A pressure transducer based on liquid sodium	B. Cleaver and S. P. Kumar
399-404	Studies of the electrodeposition of palladium from baths based on [Pd(NH₃)₂X₂] salts. I. [Pd(NH₃)₂Cl₂] baths	R. Le Penven, W. Levason and D. Pletcher
405-417	Development of anodes for aluminium/air batteries — solution phase inhibition of corrosion	D. D. Macdonald and C. English
418-426	The electrochemical behaviour of polycrystalline nickel electrodes in different carbonate-bicarbonate ion-containing solutions	A. E. Bohé, J. R. Vilche and A. J. Arvia
427-437	Electrochemical hydrodynamics in magnetic fields with laser interferometry: Influence of paramagnetic ions	R. N. O'Brien and K. S. V. Santhanam
438-441	Erosion of sintered TiB₂-cathodes during cathodic aluminium deposition from LiCl/AlCl₃ melts	H. Wendt and S. Dermeik
442-446	Thin films of Co₃O₄ and NiCo₂O₄ obtained by the method of chemical spray pyrolysis for electrocatalysis III. The electrocatalysis of oxygen evolution	R. -N. Singh, M. Hamdani, J. -F. Koenig, G. Poillerat and J. L. Gautier, et al.
447-453	The relationship between the growth rate of hydrogen bubbles and the duration of the ‘induction period’ in the electrowinning of zinc from sulphate electrolytes	Chr Bozhkov, I. Ivanov and St. Rashkov
454-456	Simple electrochemical immobilization of the ferro/ferricyanide redox couple on carbon electrodes	H. Gomathi and G. Prabhakara Rao
457-462	A novel, two-phase medium for electrochemically induced conversion coatings	R. P. Tison, D. D. Synder and S. -C. S. Wang
463-467	Vanadium redox cell electrolyte optimization studies	M. Kazacos, M. Cheng and M. Skyllas-Kazacos
468-474	Electrochemical polymerization of 7-methylthionaphthene-indole	G. Casalbore-Miceli, G. Beggiato, P. G. Di Marco, A. Geri and G. Giro
475-478	High speed zinc electrowinning using a hydrogen gas-diffusion electrode	N. Furuya and N. Mineo
479-487	Mechanistic and kinetic aspects of silver dissolution in cyanide solutions	J. B. Hiskey and V. M. Sanchez
488-493	Structural investigation of pyrazole derivatives as corrosion inhibitors for delta steel in acid chloride solutions	A. G. Gad Allah and H. M. Tamous
494-499	Effect of temperature on the formation and dissolution of anodic oxide films on titanium in acid solutions	A. A. Mazhar
500-505	Properties of Ni−S_x electrodes for hydrogen evolution from alkaline medium	R. Sabela and I. Paseka
506-511	Oxidation of hydrosulphide ions on gold Part I: A cyclic voltammetry study	A. Briceno and S. Chander
512-517	Oxidation of hydrosulphide ions on gold Part II: Characterization of gold/aqueous hydrosulphide solution interface	A. Briceno and S. Chander
518-521	TiO₂ catalysed reduction of Cr(VI) in aqueous solutions under ultraviolet illumination	J. Muñoz and X. Domènech
522-523	The potential-pH diagram for the Ru−H₂O−Cl⁻ system at 25°C	T. Loučka
524-526	Electrocatalytic oxidation of hydrogen, formic acid and methanol on platinum modified copolymer (pyrrole-dithiophene) electrodes	H. Laborde, J. -M. Leger, C. Lamy, F. Garnier and A. Yassar
527-528	An efficient electrosynthesis of 2,4- and 2,6-diaminotoluenes	A. Vélin-Prikidánovics and J. Lessard
532-536	Calendar

Volume 20, Number 4 / July 1990

537-548	Particle size and structural effects in platinum electrocatalysis	S. Mukerjee
549-554	Electrosynthesis at oxide coated electrodes Part 1 the kinetics of ethanol oxidation at spinel electrodes in aqueous base	P. Cox and D. Pletcher
555-558	Studies of the pH of the membrane surface in a laboratory chlor-alkali cell	Y. Ogata, S. Uchiyama, M. Hayashi, M. Yasuda and F. Hine
559-562	The application of renewal theory to anodic dissolution processes	T. Z. Fahidy
563-574	The influence of suspended particles on the mass transfer at a rotating disc electrode. Non-conducting particles	P. J. Sonneveld, W. Visscher and E. Barendrecht
575-585	A general computational method for mass-transport problems involving wall-jet electrodes and its application to simple electron-transfer, ECE and DISP1 reactions	R. G. Compton, C. R. Greaves and A. M. Waller
586-589	The wall-jet electrode and its application to the study of electrode reactions with coupled homogeneous kinetics: the DISP1 reaction	R. G. Compton, C. R. Greaves and A. M. Waller
590-595	The modification of aromatic electrolytes for electrodeposition of aluminium	S. Białłazór and A. Lisowska-Oleksiak
596-605	Electrodeposition of polypyrrole layers on aluminium from aqueous electrolytes	P. Hülser and F. Beck
606-610	Fabrication and properties of combined electrode/electrolyte tape for molten carbonate fuel cells	J. Niikura, K. Hatoh, N. Taniguchi, T. Gamo and T. Iwaki
611-618	The effect of the concentration of TBACl on the electrodeposition of zinc from chloride and perchlorate electrolytes	M. Sánchez Cruz, F. Alonso and J. M. Palacios
619-624	Electrochemical oxidation of carbon fibres in aqueous solutions and analysis of the surface oxides	A. D. Jannakoudakis, P. D. Jannakoudakis, E. Theodoridou and J. O. Besenhard
625-629	The addition of aluminium oxide to the nickel anodes of a molten carbonate fuel cell	L. Suski and J. Wyrwa
630-634	Effect of nickel in zinc electrowinning under periodical reverse current	N. Massé and D. L. Piron
635-639	Electrodeposition of zinc-nickel alloy coatings: influence of a phenolic derivative	R. Albalat, E. Gómez, C. Müller, M. Sarret and E. Vallés, et al.
640-644	Electrochemical synthesis and characterization of poly(m-toluidine)	P. Herrasti and P. Ocón
645-650	Ion and solvent transfers at homoionic junctions between concentrated electrolyte solutions	P. R. Mussini, P. Longhi, T. Mussini and S. Rondinini
651-655	Characterization and use of aqueous caesium chloride as an ultra-concentrated salt bridge	P. R. Mussini, F. D'Andrea, A. Galli, P. Longhi and S. Rondinini
656-661	Modification of diaphragm-type chlor-alkali cells to ion exchange membrane cells	K. Yamaguchi
662-671	Conductivité éléctrique totale du système iodure d'argent-diiodure de diazonia-6,9-dispiro [5.2.5.2] hexadecane. Application a l'étude d'un générateur tout solide	J. J. Rosenberg and J. Estienne
672-676	Electrochemical studies with tin electrodes in citric acid solutions	B. F. Giannetti, P. T. A. Sumodjo and T. Rabockai
677-685	Electrochemical impedance spectroscopy on porous electrodes	L. M. Gassa, J. R. Vilche, M. Ebert, K. Jüttner and W. J. Lorenz
686-691	The influence of electrode porosity and temperature on electrochemical gas evolution at platinum and rhodium	H. -J. Heidrich, L. Müller and B. I. Podlovchenko
692-700	Total electrical conductivity of double salts of the type silver iodide-poly (N-hexylene, N′-alkylene, N,N,N′,N′-tetramethyldiammonium diiodide)	J. J. Rosenberg, A. Benchettara, A. Nouacer and J. Estienne
701-705	Electrical conductivity of double salts of the silver iodide triethylenediammonium and N,N′-dialkyl triethylenediammonium diiodide types	J. J. Rosenberg, A. Benchettara, A. Nouacer and J. Estienne
706-710	Calendar
710	Strategies 2000 The Jourth World Congress of Chemical Engineering

Volume 20, Number 5 / September 1990

711-715	Cathodic modification as a means of improving the corrosion resistance of alloys	J. H. Potgieter, A. M. Heyns and W. Skinner
716-722	Reduction of by-product formation in alkali chloride membrane electrolysis	D. Bergner
723-727	Simultaneous solution of the potential equations for the metal and solution phases in cylindrical electrochemical reactors	J. M. Bisang
728-736	The effects of antimony and glue on zinc electrowinning from Kidd Creek electrolyte	D. J. Mackinnon, R. M. Morrison, J. E. Mouland and P. E. Warren
737-739	Chemically regenerative redox fuel cells. I Membrane studies	R. Larsson and B. Folkesson
740-748	Flow-through and flow-by porous electrodes of nickel foam Part III: theoretical electrode potential distribution in the flow-by configuration	S. Langlois and F. Coeuret
749-755	Flow-through and flow-by porous electrodes of nickel foam Part IV: experimental electrode potential distributions in the flow-through and in the flow-by configurations	S. Langlois and F. Coeuret
756-762	Electrochemical behaviour of rapidly solidified and conventionally cast Cu-Ni-Sn alloys	L. Deyong, M. Elboujdaïni, R. Tremblay and E. Ghali
763-767	Li/Li_1+xV₃O₈ secondary button cells: dependence of cycle life on electrolyte nature and cycling regime	A. Momchilov, V. Manev, A. Nassalevska, M. Pasquali and G. Pistoia
768-774	Dielectric properties of anodic oxide layers on tantalum	A. Rešetić and B. Jarić
775-780	Automatic titration of reducing gases in inert gases using an oxygen pump-gauge	H. Taimatsu, H. Kaneko and T. Sasaki
781-785	Pulsed electrodeposition of zinc in magnetic fields: diffusion layer relaxation followed by laser interferometry	R. N. O'Brien and K. S. V. Santhanam
786-792	Electrochemically formed transient ReS₂/Re₂O₇ heterojunction with high energy conversion efficiency	B. Schubert and H. Tributsch
793-797	An electrochemical method for the measurement of the heterogeneous kinetics of the uptake of a reactive dye by a cotton cloth	R. G. Compton and M. Wilson
798-803	Investigation of anodic aluminium oxide layers by electrochemical impedance spectroscopy	B. Van der Linden, H. Terryn and J. Vereecken
804-810	Structural modifications of a spent molten carbonate fuel cell	S. Freni, N. Giordano and S. Cavallaro
811-817	Characterization of the morphological modification induced by long term operations on phosphoric acid fuel cell (PAFC) electrodes	V. Alderucci, V. Recupero, L. Pino, R. Di Leonardo and D. L. Cocke, et al.
818-825	Electrochemical preparation of cuprous oxide powder: Part I. Basic electrochemistry	J. Ji and W. C. Cooper
826-834	Electrochemical preparation of cuprous oxid powder: Part II. Process conditions	J. Ji and W. C. Cooper
835-840	The influence of ion-ion interactions on the kinetics of intercalation in a layered host structure	D. Deroo, D. Pedone and F. Dalard
841-847	Voltammetric behaviour of iron in cement II: effect of sodium chloride and corrosion inhibitor additions	J. T. Hinatsu, W. F. Graydon and F. R. Foulkes
848-854	Comportement électrochimique d'alliages Cu-Ni-Cr microcristallins en milieu chlorure	M. Elboujdaïni, E. Ghali and R. Angers
855-863	Leaching of Raney nickel composite-coated electrodes	Y. Choquette, L. Brossard and H. Ménard
864-867	Measurement of the activity of lithium in dilute solutions in molten lithium chloride between 650°C and 800°C	J. Liu and J. -C. Poignet
868-873	An electrochemical route to GaSb thin films	F. Paolucci, G. Mengoli and M. M. Musiani
874-876	Electrochemical impedance studies on pure aluminium in carbonate solution	J. C. S. Fernandes, M. G. S. Ferreira and C. M. Rangel
877-879	Graphite felt as an electrode for thin-layer electrochemistry	D. Golub and Y. Oren
880-884	Calendar
884	Annual listing of new electrochemistry books

Volume 20, Number 6 / November 1990

885-892	Mass transfer in a laminar-flow parallel plate electrolytic cell with simultaneous development of velocity and concentration boundary layers	Jian Qi and R. F. Savinell
893-900	Material properties and processing in the production of fuel cell components: I. Hydrogen anodes from Raney nickel for lightweight alkaline fuel cells	W. Jenseit, A. Khalil and H. Wendt
901-906	An analysis of random perturbations in electrolyzers	T. Z. Fahidy
907-911	Chemically regenerative redox fuel cells II. Regeneration reaction studies	Börje Folkesson
912-915	The wall-jet electrode and the study of electrode reaction mechanisms: the EC reaction	R. G. Compton, A. C. Fisher and G. P. Tyley
916-924	Electrochemistry of anodic fluorine gas evolution at carbon electrodes: Part II studies on the ‘CF’ film by the current-interruption, AC impedance, ESCA and auger techniques	L. Bai and B. E. Conway
925-931	Electrochemistry of anodic fluorine gas evolution at carbon electrodes: Part III characterization of activated carbon anodes following onset of the ‘anode effect’	L. Bai and B. E. Conway
932-940	Simultaneous electrosynthesis of alkaline hydrogen peroxide and sodium chlorate	E. E. Kalu and C. Oloman
941-950	Electrochemical oxidation of acidic Alberta coal slurries	G. Thomas, M. Chettiar and V. I. Birss
951-954	A three-dimensional current feeder for fluidized bed electrodes	N. Vatistas and M. Bartolozzi
955-963	The effects of saponin, antimony and glue on zinc electrowinning from Kidd Creek electrolyte	D. J. Mackinnon, R. M. Morrison, J. E. Mouland and P. E. Warren
964-968	A solid state amperometric humidity sensor	M. Lieder, F. Rourke and C. A. Vincent
969-973	Voltammetric and galvanostatic studies of hydrous and anhydrous iridium oxide films	M. Vuković
974-977	Improvement of the performance of porous electrodes using ionic conducting particles: Application to silver recovery	Yang Bingkun
978-985	Kinetics of the anodic oxidation of benzyl alcohol in dichloromethane in the presence of redox mediator and phase transfer catalyst	J. S. Do and T. C. Chou
986-988	The effect of the type of electric current on the cathodic corrosion of aluminium	E. Sabeva, I. Dobrewsky and P. Dineff
989-995	Electrochemical polymerization of N-methyl-10,10-dimethylphenazasiline	G. Casalbore Miceli, G. Beggiato, S. S. Emmi, A. Geri and S. Daolio, et al.
996-999	AC-Impedance measurements on aluminium in chloride containing solutions and below the pitting potential	S. E. Frers, M. M. Stefenel, C. Mayer and T. Chierchie
1000-1003	The application of electrochemical impedance techniques to aluminium corrosion in acidic chloride solution	C. M. A. Brett
1004-1008	Electrochemical impedance spectroscopy as a valuable monitoring technique for various forms of corrosion	P. R. Roberge, E. Halliop, M. Asplund and V. S. Sastri
1009-1014	Zinc deposition and passivated hydrogen evolution in highly acidic sulphate electrolytes: Depassivation by nickel impurities	C. Cachet and R. Wiart
1015-1020	Electrolytic oxygen evolution on Ni-Co-P alloys	J. Kupka and A. Budniok
1021-1024	A new Zn\|AlCl₃\|MnO₂ galvanic cell suitable to water-activation	T. Yamamoto and T. Shoji
1025-1032	Nickel plating by pulse electrolysis: textural and microstructural modifications due to adsorption/desorption phenomena	C. Kollia, N. Spyrellis, J. Amblard, M. Froment and G. Maurin
1033-1039	The surface oxidation of pyrite in alkaline solution	E. Ahlberg, K. S. E. Forssberg and X. Wang
1040-1044	Electrochemical properties of poly(decaviologen) in polymer media	A. Bouridah, F. Dalard and M. B. Armand
1045-1052	Réduction électrochimique du trichloro-1,1,2 trifluoroéthane: étude de la corrosion chimique de cathodes de zinc	A. Savall, S. Dalbéra, R. Abdelhedi and M. L. Bouguerra
1053-1058	The adatom/incipient hydrous oxide mediator model for reactions on silver in base	L. D Burke and T. G. Ryan
1059-1062	The influence of some fluoroanions on the anodic oxidation of chlorate ion to perchlorate ion at a lead dioxide electrode	N. Munichandraiah and S. Sathyanarayana
1063-1066	Procedure for solution growth of ZnS, CdS and Zn_1−xCd_xS thin films by successive ionic-layer adsorptions and reactions	Y. F. Nicolau and J. C. Menard
1067-1070	Calendar
1070	New items

Volume 21, Number 1 / January 1991

1	Editorial	Tony Wragg
2-5	The wall-jet electrode and the study of electrode reaction mechanisms: The EC′ (catalytic) mechanism	R. G. Compton, A. C. Fisher and G. P. Tyley
6-10	Local current densities in a two rotating disc electrode system with an axial electrolyte inlet measured by an autoradiographic method	M. Šimek, I. Roušar and B. Štverák
11-13	Electrosynthesis at oxide coated electrodes Part 2. The oxidation of alcohols and amines at spinel anodes in aqueous base	P. Cox and D. Pletcher
14-20	Electrochemical waste water treatment using high overvoltage anodes. Part I: Physical and electrochemical properties of SnO₂ anodes	R. Kötz, S. Stucki and B. Carcer
21-27	The electrochemical synthesis of aminonitriles I. H-cell studies with adiponitrile and azelanitrile	Y. Song and P. N. Pintauro
28-31	The effect of heat-treatment on the properties of activated carbon fibre cloth polarizable electrodes	I. Tanahashi, A. Yoshida and A. Nishino
32-39	Mass transfer at rotating cone electrodes	A. F. S. Afshar, D. R. Gabe and B. Sewell
40-43	Mass transfer in annular electrolytic cells with gas stirring	O. N. Cavatorta, U. Böhm and A. M. Chiappori de del Giorgio
44-49	Zinc-nickel coatings: Relationship between additives and deposit properties	R. Albalat, E. Gómez, C. Müller, J. Pregonas and M. Sarret, et al.
50-54	Electrodeposition of silver powder by pulsating and reversing currents	K. I. Popov, B. A. Mitrović, M. G. Pavlović and B. V. Toperić
55-59	Electrodeposition of Ni-transition alloys for the oxygen evolution reaction	Hui Jun Miao and D. L. Piron
60-63	Indirect electroreduction of o-nitrophenol to o-aminophenol on titanium dioxide coated titanium electrodes	C. Ravichandran, C. Joseph Kennady, S. Chellammal, S. Thangavelu and P. N. Anantharaman
64-72	The effect of Co²⁺, Cu²⁺, Fe²⁺ and Fe³⁺ during electrowinning of nickel	S. K. Gogia and S. C. Das
73-76	The hydrogen evolution reaction in an acid medium on nickel electrodeposited with SiW₁₂O₄₀⁴⁻ or SiMo₁₂O₄₀⁴⁻ from electrolytes of various anionic compositions	O. Savadogo and C. Allard
77-83	Electrochemical behaviour of a zinc electrode in 8 M KOH under pulsed potential loading	E. Djoufac Woumfo and O. Vittori
84-90	Electrochemical behaviour of tin in bicarbonate solution at pH 8	M. Drogowska, H. Ménard and L. Brossard
91-94	Calendar

Volume 21, Number 2 / February 1991

95-98	AC impedance studies on nickel oxide electrodes to determine self-discharge characteristics of Ni-H₂ batteries	K. A. Murugesamoorthi, S. Srinivasan and A. J. Appleby
99-104	Electrochemical waste water treatment using high overvoltage anodes Part II: Anode performance and applications	S. Stucki, R. Kötz, B. Carcer and W. Suter
105-110	A zinc-air cell employing a packed bed anode	J. W. Evans and G. Savaskan
111-117	Calculation of mean current densities in a two rotating disc electrodes system	M. Šimek and I. Roušar
118-123	The effect of random perturbations on the performance of tank electrolysers	T. Z. Fahidy
124-129	An investigation of the spouted bed electrode cell for the electrowinning of metal from dilute solutions	V. D. Stanković and S. Stanković
130-135	The manganese dioxide electrode part XI: An X-ray diffraction study of materials produced by H insertion into an EMD	J. Fitzpatrick and F. L. Tye
136-142	Problems in DSA^® coating deposition by thermal decomposition	Ch. Comninellis and G. P. Vercesi
143-150	Low severity coal conversion by an electroreduction route	M. Farooque, A. Kush, H. Maru and J. Macdonald
151-157	The stability of hydrous oxide films on platinum	L. D. Burke and J. F. O'sullivan
158-165	Selecting an optimum electrolyte for zinc chloride electrolysis	P. M. Copham and D. J. Fray
166-169	Application of porous flow through electrodes: IV. Hydrogen evolution on packed bed electrodes of iron spheres in flowing alkaline solutions	B. E. El-Anadouli, M. M. Khader, M. M. Saleh and B. G. Ateya
170-174	Influence of potassium sodium tartrate on the initial stage of silver electrodeposition	E. Michailova and A. Milchev
175-180	Carbon activity measurement using a solid state potentiometric cell: Application to boron carbides	K. Froment, J. Fouletier and M. Fouletier
181-183	Effect of hydrogen on impedance of the passivating film on iron	Rak-Hyun Song, Su-Il Pyun and R. A. Oriani
184-188	Calendar
188	Strategies 2000 The Fourth World Congress of Chemical Engineering
188	Report on the "IX Congreso Iberoamerica de Electroquimica" (IXth Ibero-American Congress of Electrochemistry)

Volume 21, Number 3 / March 1991

189-202	The refining of lead by the Betts process	J. A. González-Domínguez, E. Peters and D. B. Dreisinger
203-207	A tungsten-trioxide/prussian blue complementary electrochromic cell with a polymer electrolyte	M. A. Habib, S. P. Maheswari and M. K. Carpenter
208-212	Double-channel electrodes: Homogeneous kinetics and collection efficiency measurements	A. C. Fisher and R. G. Compton
213-220	The effects of Dowfroth, antimony and Saponin on zinc electrowinning from Kidd Creek electrolyte	D. J. Mackinnon, R. M. Morrison, J. E. Mouland and P. E. Warren
221-225	On the characterization of oxygen recombination in sealed lead-acid batteries	H. Dietz, M. Radwan, J. Garche, H. Döring and K. Wiesener
226-230	New methods of uranium (IV) production using a Pt-loaded gas-diffusion electrode	M. Shibata and N. Furuya
231-237	Effect of surface conditioning on zinc nucleation using aluminium cathodes	T. Xue, W. C. Cooper, R. Pascual and S. Saimoto
238-246	Effect of fluoride ions on the corrosion of aluminium in sulphuric acid and zinc electrolyte	T. Xue, W. C. Cooper, R. Pascual and S. Saimoto
247-254	Effect of some aromatic nitro compounds on the passivation of copper anodes during electrorefining	S. Jin and E. Ghali
255-260	Influence of some organic compounds on the corrosion mechanism of carbon steel (XC 38) in 3% NaCl I. dodecyl sodium phosphonate (C₁₀H₂₁PO₃Na₂) and n-undecylimidazole (C₁₄H₂₆N₂) surfactants	F. Dabosi, Y. Derbali, M. Etman, A. Srhiri and A. De Savignac
261-266	Influence of some organic compounds on the corrosion mechanism of carbon steel (XC38) in 3% NaCl II. Orthoaminothiophenol (C₆H₇NS) and surfactant dodecyl sodium phosphate (C₁₀H₂₁PO₄Na₂)	A. Ben-Bachir, A. Srhiri, F. Dabosi, Y. Derbali and M. Etman, et al.
267-275	Electrolytic equipment for reductions in liquid ammonia	C. Combellas, H. Marzouk and A. Thiebault
276-277	The passivation of nickel in 0.5m
278-282	Calendar
282	Strategies 2000 the Fourth World Congress of Chemical Engineering 16–21 June 1991 Karlsruhe, Federal Republic of Germany

Volume 21, Number 4 / April 1991

283-294	Ion exchange membranes and separation processes with chemical reactions	T. Sata
295-300	Non-uniform accessibility and the use of hydrodynamic electrodes for mechanistic studies: A comparison of wall-jet and rotating disc electrodes	R. G. Compton, A. C. Fisher and G. P. Tyley
301-307	Polymer electrolyte lithium batteries rechargeability and positive electrode degradation: An AC impedance study	R. Koksbang, I. I. Olsen, P. E. Tonder, N. Knudsen and D. Fauteux
308-312	Calciumβ″-alumina and Nasicon electrolytes in galvanic cells with solid reference electrodes for detection of sulphur oxides in gases	G. Róg, A. Kozłowska-Róg, K. Zakuła, W. Bogusz and W. Pycior
313-316	Gas-diffusion electrodes catalysed with tungsten carbide as anodes for nickel electrowinning	V. Nikolova, I. Nikolov, T. Vitanov, A. Möbius and K. Wiesener, et al.
317-320	Electrolytic recovery of iron from pickling solutions by tungsten carbide gas-diffusion anodes	B. Streng, A. Möbius, K. Wiesener, V. Nikolova and I. Nikolov, et al.
321-326	Simultaneous electrolytic production of xylitol and xylonic acid from xylose	A. Jokic, N. Ristic, M. M. Jaksic, M. Spasojevic and N. Krstajic
327-330	Measurement of the ionic conductance of regenerated cellulose membranes in alkaline solutions with attention to current refraction	A. A. Jenkins, W. C. Maskell and F. L. Tye
331-334	Electrosynthesis of N-methylhydroxylamine	J. R. Ochoa Gomez
335-345	Characterization of DSA^®-type oxygen evolving electrodes: Choice of a coating	Ch. Comninellis and G. P. Vercesi
346-350	Nature and corrodability of thin oxide films formed on niobium in NaOH solutions	A. G. Gad Allah
351-357	Electrochemical behaviour of titanium(II) and titanium(III) compounds in molten lithium chloride/ potassium chloride eutectic melts	B. N. Popov, M. C. Kimble, R. E. White and H. Wendt
358-364	The corrosion of copper in ethylene glycol-water mixtures containing chloride ions	P. M. May, I. M. Ritchie and E. T. Tan
365-367	Electrosynthesis of quaternary ammonium hydroxides	J. R. Ochoa Gomez and M. Tarancon Estrada
368-371	A method ofIR drop measurements using a current interruption technique: An application to half cell studies with porous gas diffusion electrodes	A. S. Al-Zakri, S. Gultekin, M. A. Al-Saleh and H. Celiker
372-376	Calendar

Volume 21, Number 5 / May 1991

377-385	Electrocrystallization: Fundamental considerations and application to high current density continuous steel sheet plating	R. Winand
386-394	Behaviour of a tall vertical gas-evolving cell. Part I: Distribution of void fraction and of ohmic resistance	L. J. J. Janssen and G. J. Visser
395-401	Characterization of gas flow configurations for phosphoric acid fuel cells	K. Mitsuda and T. Murahashi
402-408	Transport and conductivity properties of an advanced cation exchange membrane in concentrated sodium hydroxide	E. J. Taylor, N. R. K. Vilambi, R. Waterhouse and A. Gelb
409-414	Dynamic simulation of the charge-discharge characteristics of the sodium-sulphur cell	H. Kawamoto
415-418	Estimation of current bypass in a bipolar electrode stack from current-potential curves	Ch. Comninellis, E. Plattner and P. Bolomey
419-424	Determination of leaching rates of precious metals by electrochemical techniques	R. Dorin and R. Woods
425-429	Voltammetric behaviour of iron in cement. III. Comparison of iron versus reinforcing steel	J. T. Hinatsu, W. F. Graydon and F. R. Foulkes
430-434	Indium hexacyanoferrate(III) coating for stabilizing polycrystalline CdSe photoelectrodes	T. Gruszecki and B. Holmström
435-439	The influence of carbon monoxide on the voltammetric behaviour of nickel in acid solutions	A. M. Castro Luna and A. J. Arvia
440-445	Electrocatalytic activity of nickel black electrodes for the hydrogen evolution reaction in alkaline solutions	A. C. Chialvo and M. R. Gennero de Chialvo
446-451	The influence of the electrochemical treatment on Cu-Al-Ag alloys in deaerated 0.5 M NaOH	P. L. Cabot, F. A. Centellas, J. A. Garrido, P. T. A. Sumodjo and A. V. Benedetti, et al.
452-456	Different commercial grades of aluminium as galvanic anodes in alkaline zincate solutions	M. Paramasivam, G. Suresh, B. Muthuramalingam, S. Venkatakrishna Iyer and V. Kapali
457-462	The hydrogen evolution reaction in an acid medium on nickel electrodeposited with PMo₁₂O₄₀³⁻ or MoO₄²⁻	O. Savadogo and S. Lévesque
463-464	Electrochemical engineering — towards 2000	A. Storck and A. A. Wragg
465-470	Calendar

Volume 21, Number 6 / June 1991

471-482	Alloys cathodically modified with noble metals	J. H. Potgieter
483-486	Morphologies of anodic oxide films deduced from dissolution studies	M. M. Hefny
487-495	Calculation of steady-state distributions of concentrations and potential controlled by diffusion and migration of ions	A. Katagiri
496-503	Electrochemical and chemical reactions in baths for plating amorphous alloys	M. Donten and J. Osteryoung
504-507	An efficient method for the electrochemical preparation of Co(III) acetate	D. C. Trivedi and S. K. Dhawan
508-515	In situ activation of cathodes during alkaline water electrolysis by dissolved iron and molybdenum species	L. Brossard and J. -Y. Huot
516-523	Preparation and modification of hydrous thick cobalt oxide layers: Voltammetric characteristics of rough Co₃O₄-spinel-type electrodes	T. Kessler, A. Visintín, W. E. Triaca, A. J. Arvia and M. R. Gennero de Chialvo
524-530	Air and fuel starvation of phosphoric acid fuel cells: A study using a single cell with multi-reference electrodes	K. Mitsuda and T. Murahashi
531-536	The interaction of iron species with pyrite surfaces	Y. Ramprakash, D. F. A. Koch and R. Woods
537-542	Mass transfer at the gas evolving inner electrode of a concentric cylindrical reactor	M. F. El-Sherbiny, A. A. Zatout, M. Hussien and G. H. Sedahmed
543-551	Electrooxidation/electroreduction processes at composite iron hydroxide layers in carbonate-bicarbonate buffers	E. B. Castro and J. R. Vilche
552-554	The electroreduction of carbon monoxide at metal/zirconium hydrogen phosphate interfaces	R. C. T. Slade, S. R. Narayanan, J. A. Knowles, P. G. Hall and M. N. Mahmood
555-558	Performance characteristics of zinc-N,N′-dichlorodimethyl hydantoin primary cell	R. Udhayan, N. Muniyandi and P. B. Mathur
559-564	Calendar

Volume 21, Number 7 / July 1991

565-574	Some fundamental aspects of levelling and brightening in metal electrodeposition	L. Oniciu and L. Mureşan
575-582	Electrochemical and XPS studies of the surface oxidation of synthetic heazlewoodite (Ni₃S₂)	A. N. Buckley and R. Woods
583-587	Mass transfer and flow rate measurements for a system of two rotating disc electrodes with an axial electrolyte inlet	M. Šimek and I. Roušar
588-596	Electrochemical oxidation of sulphite ions at graphite electrodes	T. Hunger, F. Lapicque and A. Storck
597-605	Dependence of performance of solid polymer electrolyte fuel cells with low platinum loading on morphologic characteristics of the electrodes	E. A. Ticianelli, J. G. Beery and Supramaniam Srinivasan
606-611	Electrodeposition of Ni-Cu-Mo ternary alloys from citrate electrolytes	E. Beltowska-Lehman, E. Chassaing and K. Vu Quang
612-618	Oxygen evolution in 30% KOH at 70°C on nickel anodically coated with CoOOH/Co₃O₄	L. Brossard
619-624	Surface properties of the system: Hard metal/Co coating/electrolyte	M. Metikoš-Huković, E. Stupnišek-Lisac and D. Sokolean
625-631	Tosyl-hydrazine, 4-nitrobenzoyl-hydrazine and terephthalyl-hydrazine as inhibitors for the corrosion of copper and aluminium in sulphiric acid	S. Sankarapapavinasam, F. Pushpanaden and M. F. Ahmed
632-636	Corrosion of metals in molten lithium sulphate-potassium sulphate eutectic	G. M. Abou-Elenien
637-641	Hypochlorite production II. Direct electrolysis in a cell divided by an anionic membrane	N. Krstajić, V. Nakić and M. Spasojević
642-645	Corrosion behaviour of electrodeposited zinc-nickel alloys	M. Pushpavanam, S. R. Natarajan, K. Balakrishnan and L. R. Sharma
646-650	Cyclic charge-discharge behaviour of sintered plate cadmium electrodes in the presence of organic additives	S. Tamil Selvan, R. Sabapathi and N. Venkatakrishnan
651-653	A mass transfer study of the electropolishing of vertical discs under free convection	I. Nirdosh and G. H. Sedahmed
654-658	Calendar

Volume 21, Number 8 / August 1991

659-666	Reticulated vitreous carbon cathodes for metal ion removal from process streams part I: Mass transport studies	D. Pletcher, I. Whyte, F. C. Walsh and J. P. Millington
667-671	Reticulated vitreous carbon cathodes for metal ion removal from process streams part II: Removal of copper(II) from acid sulphate media	D. Pletcher, I. Whyte, F. C. Walsh and J. P. Millington
672-677	Electrodeposition of Fe−Ni−Co alloys part I: Direct current deposition	N. H. Phan, M. Schwartz and K. Nobe
678-682	Iridium-tin mixed oxide anode coatings	E. N. Balko and P. H. Nguyen
683-689	Dispersion deposition of metal — Particle composites and the evaluation of dispersion deposited nickel — Lanthanum nickelate electrocatalyst for hydrogen evolution	A. Anani, Z. Mao, S. Srinivasan and A. J. Appleby
690-696	Electrochemical impedance study of the reaction mechanism for electro-oxidation of isosorbide	N. Pebere, F. Dabosi, F. Jacquet and A. Gaset
697-702	Characterization of copper oxidation by linear potential sweep voltammetry and UV-Visible-NIR diffuse reflectance spectroscopy	M. Lenglet, K. Kartouni and D. Delahaye
703-708	Anodic oxidation of phenol for waste water treatment	Ch. Comninellis and C. Pulgarin
709-715	Electrochemical nucleation of nickel on vitreous carbon electrodes: the influence of organic additives	R. Albalat, E. Gómez, C. Müller, M. Sarret and E. Vallés
716-720	Effect of anode material and bath composition on bubble layer resistivity and gaseous volume fraction in an aluminium electrolysis cell with sloping anode and cathode	D. Kasherman and M. Skyllas-Kazacos
721-728	A fully automated four-probe d.c. conductivity technique for investigating solid electrolytes	S. P. S. Badwal, F. T. Ciacchi and D. V. Ho
729-733	Breakdown voltage and electronic current studies of tantalum-tantalum oxide electrolyte systems	K. C. Kalra and P. Katyal
734-739	Removal of chromium from aqueous solutions by treatment with fibrous carbon electrodes: column effects	M. Abda, Z. Gavra and Y. Oren
740-742	Nucleophilic substitution of halogeno-nitrobenzenes by superoxide ions electrocatalyzed by metallo-porphyrins	Chuban Huang, Dong Zhang and Shufang Wang
743-745	The effect of the pause-to-pulse ratio on the morphology of metal powder particles electrodeposited by square-wave pulsating overpotential	K. I. Popov, M. G. Pavlović and G. Ž. Remović
746-751	Calendar
752	Book review	G. H. Kelsall

Volume 21, Number 9 / September 1991

753-759	Behaviour of a tall vertical gas-evolving cell Part II: Distribution of current	L. J. J. Janssen and G. J. Visser
760-766	Theoretical and experimental studies of current distribution in gas-evolving electrochemical reactors with parallel-plate electrodes	J. M. Bisang
767-773	Computer simulation of high-discharge-rate battery systems	V. J. Farozic and G. A. Prentice
774-780	Electrochemical and reflectance study of the conversion of zinc oxide by hexacyanoferrate(II) in offset lithography Part I: Zinc electrochemistry with minor components	D. R. Rosseinsky, J. D. Slocombe and A. M. Soutar
781-784	Effect of silicate on the membrane-type chlor-alkali cell	F. Hine, T. Ohtsuka, M. Hayashi, K. Suzuki and Y. Ogata
785-792	Correlation between mass transfer and operating parameters in zinc electrowinning	A. Y. Hosny, T. J. O'Keefe, J. W. Johnson and W. J. James
793-798	Behaviour of a carbon felt flow by electrodes Part I: Mass transfer characteristics	R. Carta, S. Palmas, A. M. Polcaro and G. Tola
799-804	The role of supporting electrolyte during the electrocatalytic hydrogenation of aromatic compounds	P. N. Pintauro and J. R. Bontha
805-815	Amino-alcohol electrosynthesis. Modelling of a set-up for producing amino-2-methyl-2-propanediol-1.3	A. Savall, J. Quesado, M. Rignon and J. Malafosse
816-823	Kinetics and mechanism of the electroreduction of anodic layers produced on cadmium in alkaline solution containing sodium sulphide	L. M. Gassa, S. B. Saidman, J. R. Vilche and A. J. Arvia
824-828	Electrochemical reduction of lead chloride on some solid electrodes in fused NaCl-KCl mixtures	M. E. Lima and J. Bouteillon
829-836	Passivity of α-brass (Cu∶Zn/67∶33) and its breakdown in neutral and alkaline solutions containing halide ions	A. G. Gad-Allah, M. M. Abou-Romia, M. W. Badawy and H. H. Rehan
837-838	Thermodynamic stability of magnesium chromite from e.m.f. measurements	S. Raghavan
839-841	Synthesis of 5-amino salicylic acid at a Ti/TiO₂ electrode	D. Vasudevan, S. Chellammal and P. N. Anantharaman
842-846	Calendar

Volume 21, Number 10 / October 1991

847	Special issue in honour of the 60th birthday of Professor Dr Fritz Beck	G. Kreysa and A. A. Wragg
848-857	The electrochemistry of Magnéli phase titanium oxide ceramic electrodes Part I. The deposition and properties of metal coatings	J. E. Graves, D. Pletcher, R. L. Clarke and F. C. Walsh
858-862	Effect of substitution of SnO₂ for TiO₂ on the surface and electrocatalytic properties of RuO₂+TiO₂ electrodes	A. I. Onuchukwu and S. Trasatti
863-868	Synthesis of InSb and In_xGa_1−xSb thin films from electrodeposited elemental layers	G. Mengoli, M. M. Musiani, F. Paolucci and M. Gazzano
869-876	The behaviour of ion exchange membranes in electrolysis and electrodialysis of sodium sulphate	J. Jörissen and K. H. Simmrock
877-884	Electrochemical investigations of the autophoretic coating process	B. Pfeiffer and J. W. Schultze
885-894	Anodic stability of propylene carbonate electrolytes at potentials above 4V against lithium: An on-line MS andin situ FTIR study	E. Cattaneo, B. Rasch and W. Vielstich
895-901	Electrochemical hydrodimerization of formaldehyde to ethylene glycol	N. L. Weinberg and D. J. Mazur
902-909	In situ multiple internal reflection Fourier transform infrared spectroscopic (MIRFTIRS) study of the electrochemical immobilization of heteropolyanions in poly(1-naphthol) coated electrodes	M. -C. Pham, J. Moslih, F. Chauveau and P. -C. Lacaze
910-914	Electrochemical conversion of 4-alkyloxytoluenes to cyclic and non-cyclic 4-alkyloxybenzaldehyde acetals. A new approach to liquid-crystalline 1,3-dioxanes	R. Trutschel, G. Meister, H. Altmann, U. Fechtel and H. Matschiner
915-921	Coupling between electrolysis and liquid-liquid extraction in an undivided electrochemical reactor: applied to the oxidation of Ce³⁺ to Ce⁴⁺ in an emulsion Part I. Experimental	D. Horbez and A. Storck
922-928	Coupling between electrolysis and liquid-liquid extraction in an undivided electrochemical reactor applied to the oxidation of Ce³⁺ to Ce⁴⁺ in an emulsion Part II. Cell modelling	D. Horbez and A. Storck
929-934	High-temperature chlorine corrosion of technical carbons Part II. Anodic corrosion in chloride melt	H. Wendt, A. Khalil and C. E. Padberg
935-940	Optical properties of electrically conducting films formed by anodic oxidation of 1,2-di(2-thienyl)ethylene	J. O. Zerbino, W. J. Plieth and G. Kossmehl

Volume 21, Number 11 / November 1991

945-960	The continuous stirred tank electrochemical reactor. An overview of dynamic and steady state analysis for design and modelling	K. Scott
961-966	Activated basket anodes from nickel powder Part I: Laboratory facilities for assessing the performance of anodes in nickel electroplating baths	I. J. Bear and R. C. Flann
967-972	Potentiostatic pulse technique to determine the efficiency of hydrogen absorption by alloys	B. G. Pound
973-981	Oxygen reduction on poly(4-vinylpyridine)-modified ordinary pyrolytic graphite electrodes with adsorbed cobalt tetra-sulphonated phthalocyanine in acid solutions	Z. Y. Zeng, S. L. Gupta, H. Huang and E. B. Yeager
982-985	Nafion^®-bonded porous titanium oxide electrodes for oxygen evolution: towards a regenerative fuel cell	A. Hamnett, P. S. Stevens and R. D. Wingate
986-990	Pulsed electrogeneration of bubbles for electroflotation	N. K. Khosla, S. Venkatachalam and P. Somasundaran
991-997	Study of a laboratory filter-press cell by impedance spectroscopy	G. Barral, S. Maximovitch and C. Montella
998-1004	Mass transfer rate measurement of short time liquid phase epitaxial growth using an electrochemical method	Lai-Juh Chen, Kan-Lin Hsueh, Chi-Chao Wan and J. Gong
1005-1012	Cathodic reduction of oxygen at new iron complexes	M. A. Elmorsi, M. Gabor and E. Barendrecht
1013-1022	Corrosion behaviour of lead-copper alloys in sulphuric acid for battery applications	S. Shah, R. N. Grugel and B. D. Lichter
1023-1026	Anodization of niobium in sulphuric acid media	M. A. Biason Gomes, S. Onofre, S. Juanto and L. O. de S. Bulhões
1027-1030	The effect of metallic impurities on the hydrogen evolution reaction rate on group-Ib metals in alkaline solution	G. I. Lacconi, H. M. Villullas and V. A. Macagno
1031-1035	Calendar
1036-1037	Book reviews	F. Goodridge and K. Peters

Volume 21, Number 12 / December 1991

1037	Editorial	A. A. Wragg
1038-1046	Use of the polarographic method to measure wall shear stress	T. J. Hanratty
1047-1057	Use of electrochemical techniques to study natural convection heat and mass transfer	A. A. Wragg
1058-1062	Inertial characteristics of velocity and shear stress electrochemical probes	P. I. Geshev
1063-1067	Electrodiffusional determination of momentum transfer in annular flows: Axial developing and swirling decaying flows	J. Legrand, P. Legentilhomme, H. Aouabed, M. Ould-Rouis and C. Nouar, et al.
1068-1072	Interrelation of current and concentration at electrodes	K. B. Oldham
1073-1076	Electrodiffusional direction-specific probe for measuring local velocity of aerated aqueous systems	J. Pauli, U. Onken and V. Sobolik
1077-1080	Unsteady mass transfer in turbulent flow close to a rotating cylinder	N. A. Pokryvailo, E. B. Kaberdina and M. I. Syrkin
1081-1086	Mass transfer enhancement by suspensions in a shear flow	C. Deslouis, A. Ezzidi and B. Tribollet
1087-1090	Electrodiffusion characterization of non-Newtonian flow through packed beds	M. Hilal, D. Brunjail and J. Comiti
1091-1094	Effect of ohmic losses on potentiostatic transient response of a reversible redox system	O. Wein
1095-1098	Electrodiffusional diagnostics of gas-liquid flows: Techniques and instrumentation	O. N. Kashinsky
1099-1102	Turbulent pulsations of the microelectrode limiting diffusion current	S. A. Martemyanov, N. V. Petrovskiy and B. M. Grafov
1103-1113	Experimental and theoretical analysis of a thermogalvanic undivided flow cell with two aqueous electrolytes at different temperatures	J. M. Hornut and A. Storck
1114-1119	An electrochemical mass transport sensor to study agitation in electroplating processes	S. A. Amadi, D. R. Gabe and M. Goodenough
1120-1124	Calendar

Volume 22, Number 1 / January 1992

1-7	Thin-film catalyst layers for polymer electrolyte fuel cell electrodes	M. S. Wilson and S. Gottesfeld
8-15	Activated basket anodes from nickel powder Part II: Fabrication of anodes by a liquid phase sintering process	I. J. Bear, R. C. Flann, K. J. McDonald, L. J. Rogers and R. Woods
16-20	Activated basket anodes from nickel powder Part III: Electrochemical behaviour of sulphur activated anodes	I. J. Bear, R. C. Flann, K. J. McDonald, L. J. Rogers and R. Woods
21-27	Electrochemical oxidation of manganese(II) at a platinum electrode	W. -H. Kao and V. J. Weibel
28-37	Determination of electrode kinetics by corrosion potential measurements: Zinc corrosion by bromine	S. L. Chiu and J. R. Selman
38-42	A general computational approach to linear sweep voltammetry at channel electrodes	A. C. Fisher and R. G. Compton
43-47	The use of a porous hydrogen diffusion anode in the electrochemical reduction of glucose to sorbitol	S. G. Chen, T. Wen and J. H. P. Utley
48-56	Oxidation of some reducing agents used in electroless plating baths at gold anodes in aqueous media	L. D. Burke and B. H. Lee
57-63	Influence of surface segregation of sulphur on the corrosion resistance of 270 nickel in acidic and alkaline media	P. Rabu, G. Saindrenan, A. Caprani, T. Jaszay and J. P. Frayret
64-72	A tartrate-based alloy bath for brass-plated steel wire production	D. De Filippo, A. Rossi and D. Atzei
73-81	Nickel and cobalt synergism effect in zinc electrowinning from sulphate electrolytes	C. Bozhkov, M. Petrova and St. Rashkov
82-86	X-ray diffraction study of anisotropy by the formation and decomposition of nickel hydride Part II: Decomposition kinetics	I. Tomov, M. Monev, M. Mikhailov and S. Rashkov
87-89	Cd(SeTe) septum photoelectrochemical cells	K. R. Murali, V. Subramanian, N. Rangarajan, A. S. Lakshmanan and S. K. Rangarajan
91-94	Calendar

Volume 22, Number 2 / February 1992

95-98	Conductive fillers for immobilized alkaline zinc anodes	W. Taucher, L. Binder and K. Kordesch
99-103	Projection of improved high rate discharge performance for homogenized cathode Li/I₂ (P2VP) batteries	C. C. Streinz, J. Scala, J. W. Wagner and P. J. Moran
104-115	A validated mathematical model for a zinc electrowinning cell	G. W. Barton and A. C. Scott
116-124	Corrosion rates of lead based anodes for zinc electrowinning at high current densities	R. H. Newnham
125-130	An analysis of the steady state thermal behaviour of electrolysers with recycle	T. Z. Fahidy
131-139	Role of indium in promoting anodic dissolution of Al-In alloys in non-aqueous electrolyte	L. Bai and B. E. Conway
140-150	Oxygen reduction on Ru-oxide pyrochlores bonded to a proton-exchange membrane	J. -M. Zen, R. Manoharan and J. B. Goodenough
151-155	Effect of hydrogen on the impedance of passivating oxide films formed on aluminium in sodium nitrate solution	Seong-Min Lee and Su Il Pyun
156-160	Analysis of nonlinear Mott-Schottky plots obtained from anodically passivating amorphous and polycrystalline TiO₂ films	Eung-Jo Lee and Su-Il Pyun
161-165	Cathodic deposition of refractory intermetallic compounds from FLINAK melts Part II: Preparative cathodic deposition of TiB₂ and ZrB₂ and coatings thereof	H. Wendt, K. Reuhl and V. Schwarz
166-171	Synergetic effect of electrode activation on the h.e.r. in alkaline medium on Pt, Pd, Ni and Cu electrodes	K. Amuzgar and O. Savadogo
172-178	Phase-structure analysis of brass by anodic linear-sweep voltammetry	J. Stevanović, LJ. Skibina, M. Stefanović, A. Despić and V. D. Jović
179-181	Indirect reduction of p-nitroaniline to p-phenylenediamine at a Ti/TiO₂ electrode	C. Ravichandran, D. Vasudevan and P. N. Anantharaman
182-184	Improved cycle life performance of Zn/NiOOH cells using a stabilized zinc electrode	A. Renuka, A. Veluchamy, N. Venkatakrishnan, S. Nathira Begum and V. R. Chidambaram, et al.
185-188	Calendar

Volume 22, Number 3 / March 1992

189-194	Properties of electrochemically synthesized polymer electrodes Part VII: Kinetics of poly-3-methylthiophene in lithium cells	S. Panero, P. Prosperi, D. Zane and B. Scrosati
195-199	Properties of electrochemically synthesized polymer electrodes Part VIII: Kinetics of polypyrrole in polymer electrolyte cells	C. Casagrande, S. Panero, P. Prosperi and B. Scrosati
200-203	The electrochemistry of Magnéli phase titanium oxide ceramic electrodes Part II: Ozone generation at Ebonex and Ebonex/lead dioxide anodes	J. E. Graves, D. Pletcher, R. L. Clarke and F. C. Walsh
204-214	Analysis of radiation-grafted membranes for fuel cell electrolytes	A. G. Guzman-Garcia, P. N. Pintauro, M. W. Verbrugge and E. W. Schneider
215-223	Electrical conductivities of aqueous ZnSO₄−H₂SO₄ solutions	J. T. Hinatsu, V. D. Tran and F. R. Foulkes
224-229	Voltammetric behaviour of iron in cement Part IV: Effect of acetate and urea additions	W. M. Ushirode, J. T. Hinatsu and F. R. Foulkes
230-234	Secondary aluminium-iron (III) chloride batteries with a low temperature molten salt electrolyte	F. M. Donahue, S. E. Mancini and L. Simonsen
235-239	A xylene electrolyte modified by trimethylchlorosilane for electrodeposition of aluminium	A. Lisowska-Oleksiak, S. Białłozór and M. Lieder
240-246	An experimental study of mass transfer in pulse reversal plating	J. Y. Wang, D. Balamurugan and D-T. Chin
247-254	Corrosion behaviour of electrogalvanized steel in sodium chloride and ammonium sulphate solutions; a study by E.I.S.	L. Fedrizzi, L. Ciaghi, P. L. Bonora, R. Fratesi and G. Roventi
255-261	Cyclic voltammetric investigation of the formation of intermetallic phases at a LiAl electrode in methyl acetate	Y. S. Fung and H. C. Lai
262-267	X-ray diffraction study of anisotropy by formation and decomposition of nickel hydride Part I: Orientation dependence of the extent of phase transformation of nickel into nickel hydride	I. Tomov and M. Monev
268-276	A model for the mechanism of nickel fluoride cold sealing of anodized aluminium	M. R. Kalantary, D. R. Gabe and D. H. Ross
277-284	Effects of gas bubbles on the current and potential profiles within porous flow-through electrodes	B. E. El-Anadouli and B. G. Ateya
285-292	Investigations on N-halogen cyclic ureide based magnesium primary cell system at various temperatures	R. Udhayan, D. P. Bhatt and P. B. Mathur
293-300	Influence of the partial pressure of oxygen on the redox chemistry of multivalent elements in molten sodium tetraborate	P. Claes, Z. Bacanamwo and J. Glibert
301-303	Primary current distribution in the Hull cell and related trapezoidal geometries	A. C. West, M. Matlosz and D. Landolt
304-306	A well-defined reference electrode in acetonitrile	C. Zeyer, H. R. Grüniger and O. Dossenbach
307-309	The use of redox polymerization electrodes in lithium batteries with liquid electrolytes	M. M. Doeff, S. J. Visco and L. C. De Jonghe
310-313	Calendar
314	News items

Volume 22, Number 4 / April 1992

315-324	Formation of hypochlorite, chlorate and oxygen during NaCl electrolysis from alkaline solutions at an RuO₂/TiO₂ anode	L. R. Czarnetzki and L. J. J. Janssen
325-331	Electrochemical studies of the factors influencing the cycle stability of Prussian Blue films	D. E. Stilwell, K. H. Park and M. H. Miles
332-340	Electrocatalytic deposition of polypyrrole in the presence of bromide	F. Beck and M. Oberst
341-346	Electrodeposition and characterization of amorphous Cr-P alloys	B. A. Deneve and S. B. Lalvani
347-350	A simplified approach to the thermal behaviour of electrolytic Dewar cell calorimeters	R. E. Sioda and T. Z. Fahidy
351-357	The behaviour of a trickle tower electrolytic cell for the production of cobalt(III) acetate from cobalt(II) acetate	U. Bakir Ogutveren, R. E. Plimley and I. Nieva
358-363	The morphology and conductivity of polypyrrole/polyurethane alloy films	H. T. Chiu, J. S. Lin and C. M. Huang
364-368	Adoucissement de l'eau à l'aide du réacteur électrochimique à film ruisselant	J. Nanzer and F. Coeuret
369-375	Comparative kinetic studies of polypyrrole electrogeneration from acetonitrile solutions	T. F. Otero and E. Angulo
376-382	Kinetics of hydrogen evolution on Ni-Al alloy electrodes	A. Rami and A. Lasia
383-389	The inhibition of corrosion and hydrogen embrittlement of AISI 410 stainless steel	R. Agrawal and T. K. G. Namboodhiri
390-395	Benzenethiols as inhibitors for the corrosion of copper	S. Sankarapapavinasam and M. F. Ahmed
396-403	Slow strain rate and constant load tests of A 285 and A 516 steels in Bayer solutions	H. H. Le and E. Ghali
404-408	Calendar
408	Book reviews	W. Vielstich

Volume 22, Number 5 / May 1992

409-414	Microcalorimetric study of the self-discharge of the NiOOH/Ni(OH)₂ electrode in a hydrogen environment	Z. Mao, A. Visintin, S. Srinivasan, A. J. Appleby and H. S. Lim
415-420	Studies of platinum electroplating baths Part I: The chemistry of a platinum tetrammine bath	R. Le Penven, W. Levason and D. Pletcher
421-424	Studies of palladium electrodeposition from baths based on Pd(NH₃)₂X₂ Part II: X=Br and X=NO₂	R. Le Penven, W. Levason and D. Pletcher
425-428	Influence of nitrogen oxides on the electrocatalytic oxidation of sulphur dioxide	P. Iliev, I. Nikolov, T. Vitanov and E. Budevski
429-436	Free convective mass transfer at vertical cylindrical electrodes of varying aspect ratio	J. Krysa and A. A. Wragg
437-442	The hydrogen evolution reaction in basic medium on iron electrodeposited with heteropolyacids	O. Savadogo and F. Carrier
443-447	The effects of silicate ion on the corrosion of zinc powder in alkaline solutions	J. -Y. Huot
448-455	Electrochemical methods in the study of localized corrosion attack	M. Metikoš-Huković and I. Milošev
456-463	Impedance parameters of individual electrodes and internal resistance of sealed batteries by a new nondestructive technique	S. A. Ilangovan and S. Sathyanarayana
464-470	X-ray diffraction and thermal wave analysis of primary recrystallization in electrodeposited copper layers at room temperature	S. Surnev and I. Tomov
471-477	Transition metal-based cathodes for hydrogen evolution in alkaline solution: Electrocatalysis on nickel-based ternary electrolytic codeposits	I. Arul Raj and K. I. Vasu
478-482	Electroless nickel hydroxide: synthesis and characterization	P. Vishnu Kamath and G. N. Subbanna
483-485	Observation of mixed valency in electrosynthesized nickel hydroxide	P. Vishnu Kamath and N. Y. Vasanthacharya
486-490	Bubble effects on ion exchange membranes — an electrochemical study	Y. Xiong, L. Jialing and S. Hong
491-494	Book reviews	K. Scott, Richard Compton, A. T. Kuhn, J. H. P. Utley and T. J. Vandernoot
495-499	Calendar
500	News items

Volume 22, Number 6 / June 1992

501-505	Metallo-organic deposition of tungsten oxide films from alkylammonium tungstate solutions	A. M. Mance, M. A. Habib, S. P. Maheswari and S. J. Simko
506-511	Voltammetric study of plating baths for electrodeposition of Co-W amorphous alloys	K. Wikiel and J. Osteryoung
512-516	A polyaniline and Nafion^® composite film as a rechargeable battery	N. Li, J. Y. Lee and L. H. Ong
517-521	In situ Raman spectra of electrode products during electrolysis of HgCl₂ in molten LiCl-KCl eutectic	G. N. Papatheodorou, I. V. Boviatsis and G. A. Voyiatzis
522-527	The influence of dopant permeability on electrochromic performance of polypyrrole films	H. -T. Chiu, J. -S. Lin and J. -N. Shiau
528-534	The processing and mechanical properties of polypyrrole/polyurethane alloy films	H. -T. Chiu, J. -S. Lin and L. -T. Huang
535-540	Electrochemical intercalation of sulphuric acid into CrO₃-graphite intercalation compounds in aqueous solution	J. M. Skowroński and K. Jurewicz
541-552	Influence of the heat treatment in the electrochemical corrosion of Al-Zn-Mg alloys	P. L. Cabot, F. Centellas, J. A. Garrido, R. M. Rogríguez and E. Brillas, et al.
553-557	The numerical inversion of the Laplace transform applied to impedance spectroscopy	B. Aurian-Blajeni
558-562	Effect of a polyethoxylate surfactant on the electrodeposition of tin	A. Aragón, M. G. Figueroa, R. E. Gana and J. H. Zagal
563-570	Synthesis and properties of polyaniline obtained using sulphamic acid	S. K. Dhawan and D. C. Trivedi
571-576	Electrotransformations at some lead-antimony alloy/sulphuric acid interfaces	A. G. Gad Allah, H. A. A. El-Rahman, S. A. Salih and M. A. El-Galil
577-580	Study of the electrochemical reduction of lead chloride on a liquid lead electrode in NaCl-KCl melt	M. E. De Almeidi Lima, J. Bouteillon and J. P. Diard
581-584	Determination of arsenic(III) in caustic melts	R. Dorin and E. J. Frazer
585-587	Current distribution in a gas-evolving electrochemical reactor with an expanded metal electrode	J. M. Bisang
588-591	Calendar
592	News items

Volume 22, Number 7 / July 1992

593-595	Activation of passivated titanium anodes from the electrolysis of MnO₂	M. E. Armacanqui and R. J. Ekern
596-605	Effect of gas sparging on mass transfer in zinc electrolytes	A. Y. Hosny, T. J. O'Keefe, J. W. Johnson and W. J. James
606-612	The degradation of aluminium cathodes by fluoride ion during zinc electrowinning	J. S. Han and T. J. O'Keefe
613-619	Local mass transport effects in the FM01 laboratory electrolyser	C. J. Brown, D. Pletcher, F. C. Walsh, J. K. Hammond and D. Robinson
620-627	Cycling behaviour of lithium-aluminium alloys formed on various aluminium substrates as negative electrodes in secondary lithium cells	N. Kumagai, Y. Kikuchi and K. Tanno
628-637	Secondary processes during tantalum electrodeposition in molten salts	L. P. Polyakova, E. G. Polyakov, A. I. Sorokin and P. T. Stangrit
638-643	Comparison between the impedance spectra of Li/SOCl₂ batteries obtained using the time and the frequency domain measurement techniques	D. Metelko, J. Jamnik and S. Pejovnik
644-648	Quantum mechanical calculations of amino pyrazole derivatives as corrosion inhibitors for zinc, copper and α-brass in acid chloride solution	A. G. Gad Allah and H. Moustafa
649-656	Effect of organic acids and bases on cathodic corrosion of aluminium in chloride solutions	J. Radošević, M. Kliškić and A. R. Despić
657-662	Electrodeposition of zinc-nickel alloy coatings from a chloride bath containing NH₄Cl	R. Fratesi and G. Roventi
663-667	Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell	P. Staiti, Z. Poltarzewski, V. Alderucci, G. Maggio and N. Giordano, et al.
668-674	Scale-up studies of an Fe/Cr redox flow battery based on shunt current analysis	G. Codina and A. Aldaz
675-677	Comments on the estimation of caustic current efficiency of ion exchange membrane chlor-alkali cells	B. V. Tilak and S. D. Fritts
678-680	Platinum-containing polypyrrole coatings on stainless steel electrodes for oxygen reduction in aprotic media	A. McGee, J. F. Cassidy, P. Quigley and J. G. Vos
681-684	Calendar
685	News items

Volume 22, Number 8 / August 1992

687-692	Scale-up effects in modelling a full-size zinc electrowinning cell	G. W. Barton and A. C. Scott
693-698	Effect of PbO on zinc electrodeposition from zincate solutions	Z. Mao, S. Srinivasan and A. J. Appleby
699-704	Combination of the amalgam cell and the membrane cell processes for chlor-alkali production	F. Hine and A. J. Acioli Maciel
705-710	Preparation and properties of raney nickel electrodes on Ni-Zn base for H₂ and O₂ evolution from alkaline solutions Part I: electrodeposition of Ni-Zn alloys from chloride solutions	J. Balej, J. Divisek, H. Schmitz and J. Mergel
711-716	Preparation and properties of Raney nickel electrodes on Ni-Zn base for H₂ and O₂ evolution from alkaline solutions Part II: Leaching (activation) of the Ni-Zn electrodeposits in concentrated KOH solutions and H₂ and O₂ overvoltage on activated Ni-Zn Raney electrodes	J. Balej, J. Divisek, H. Schmitz and J. Mergel
717-721	Electrodeposition of refractory carbide coatings from fluoride melts	K. H. Stern
722-727	Activation studies on titanium anodes used in MnO₂ electrodeposition	M. E. Armacanqui and R. J. Ekern
728-732	Electrochemical investigation of the diffusion of lithium in β-LiAl alloy at room temperature	N. Kumagai, Y. Kikuchi, K. Tanno, F. Lantelme and M. Chemla
733-737	Carbon fibre based conductive ion exchangers as support for metal and ligand charged metalloporphyrin electrocatalysts	E. Theodoridou, A. D. Jannakoudakis, P. D. Jannakoudakis, S. Antoniadou and J. O. Besenhard
738-742	Rechargeable thin film batteries of polypyrrole and polyaniline	J. Y. Lee, L. H. Ong and G. K. Chuah
743-748	Indirect anodic oxidation of anthracene to anthraquinone in a slurry electrolyte system in the presence of both surfactant and redox mediator	T. -C. Chou and C. -H. Cheng
749-755	Influence of substrate on the electrodeposition of nickel-molybdenum alloys	J. Crousier, M. Eyraud, J. -P. Crousier and J. -M. Roman
756-764	Electron conducting organic coating of mild steel by electropolymerization	G. Troch-Nagels, R. Winand, A. Weymeersch and L. Renard
765-769	Production of fluorine with pulsed currents	D. Devilliers, B. Teisseyre, H. Groult and F. Lantelme
770-772	Diffusion of a gas through a membrane	D. Fan, R. E. White and N. Gruberger
773-776	Calendar
777	News items

Volume 22, Number 9 / September 1992

779-786	One-step recovery of nickel by an electrohydrometallurgical process	P. W. Page, N. P. Brandon, M. N. Mahmood and P. O. Fogarty
787-794	Electrodeposition and characterization of amorphous Fe-Cr-P-C alloys	J. -C. Kang and S. B. Lalvani
795-800	Impedance studies into the corrosion protective performance of a commercial epoxy acrylic coating formed upon tin plated steel	R. D. Armstrong, J. D. Wright and T. M. Handyside
801-809	Dynamic analysis of charge transport in fluidized bed electrodes: Impedance techniques for electro-inactive beds	C. Gabrielli, F. Huet, A. Sahar and G. Valentin
810-816	Preparation of chiral diols by the osmium-catalysed, indirect anodic oxidation of olefins	A. R. Amundsen and E. N. Balko
817-820	High-rate discharge of poly 3-methylthiophene cathodes in inorganic electrolytes	C. W. Walker
821-824	Nonstoichiometry in perovskite-type oxide Ca_1−xCe_xMnO_3−δ and its properties in alkaline solution	T. Esaka, H. Morimoto and H. Iwahara
825-829	Physicochemical properties of electrodepositedβ-lead dioxide: Effect of deposition current density	N. Munichandraiah
830-834	Current-potential relationships for the half-reactions in two electroless nickel plating baths using the quartz crystal microbalance electrode	A. H. Gafin and S. W. Orchard
835-842	Oxygen as a tracer for measurements of steady and turbulent flows	C. Deslouis, O. Gil, B. Tribollet, G. Vlachos and B. Robertson
843-851	Growth of electrodeposited copper on anodized titanium	J. -L. Delplancke, M. Ongaro and R. Winand
852-858	Electrochemical behaviour of zirconium metal and its oxide film in LiOH and HF solutions	J. -Y. Huot
859-864	Determination of electronic conductivity limits of mullite and ZrO₂-9 mol% MgO solid electrolytes	A. Nagatani, R. Inoue and H. Suito
865-871	Electrochemical reduction of Eu(III) using a flow-through porous graphite electrode	T. M. Hung and C. J. Lee
872-876	Electrodeposition of nickel on vitreous carbon: Influence of potential on deposit morphology	E. Gómez, C. Muller, W. G. Proud and E. Vallés
877-882	Electrolytic preparation of magnesium perchlorate	S. Vasudevan, S. Mohan, S. Pushpavanam and K. C. Narasimham
883-887	Spectral sensitization of sprayed thin filmn-ZnO electrodes by 4-p-dimethylaminobenzylidene-1,2-diphenyl-2-imidazoline-5-one in acetonitrile solution	Lal Bahadur and J. P. Pandey
888-892	A nickel molybdenite cathode for the hydrogen evolution reaction in alkaline media	L. B. Albertini, A. C. D. Angelo and E. R. Gonzalez
893-897	Book reviews	F. C. Walsh, John Owen, Yingyang Zhu, C. Booth and P. N. Bartlett, et al.
898-900	Calendar

Volume 22, Number 10 / October 1992

901-908	Ethylene carbonate-based organic electrolytes for electric double layer capacitors	M. Morita, M. Goto and Y. Matsuda
909-915	Further studies of a zinc-air cell employing a packed bed anode part I: Discharge	G. Savaskan, T. Huh and J. W. Evans
916-921	Further studies of a zinc-air cell employing a packed bed anode part II: Regeneration of zinc particles and electrolyte by fluidized bed electrodeposition	T. Huh, G. Savaskan and J. W. Evans
922-926	Electrocatalytic oxidation of methanol on platinum microparticles in polypyrrole	D. J. Strike, N. F. De Rooij, M. Koudelka-Hep, M. Ulmann and J. Augustynski
927-934	Aqueous polysulphide flow-through electrodes: Effects of electrocatalyst and electrolyte composition on performance	P. M. Lessner, F. R. McLarnon, J. Winnick and E. J. Cairns
935-949	The conductance of suspensions with conducting particles	P. J. Sonneveld, W. Visscher, F. Panneflek, E. Barendrecht and M. A. J. Michels
950-958	Mass transfer in an electrochemical reactor with two interacting jets	Y. Oren, M. Abda and A. Tamir
959-965	Correlation between the electrochemical properties of colloidal oxides and supported oxides on metallic substrates	M. J. Avena, R. Cabrol, O. R. Cámara and C. P. De Pauli
966-972	Anodic oxidation of benzyl alcohol to benzaldehyde in the presence of both redox mediator and polymer-supported phase-transfer catalyst	J. -S. Do and T. -C. Chou
973-977	High area Ni-Zn and Ni-Co-Zn codeposits as hydrogen electrodes in alkaline solutions	M. J. De Giz, S. A. S. Machado, L. A. Avaca and E. R. Gonzalez
978-986	Effect of some dialkyl-, diaryl-, and diarylalkyl-disulphide derivatives on copper electrodeposition	D. Stoychev, I. Vitanova, R. Bujukliev, N. Petkova and I. Popova, et al.
987-990	Effect of the structure of aromatic disulphides on some physico-mechanical properties of electrodeposited copper coatings	D. Stoychev, I. Vitanova, R. Buyukliev, N. Petkova and I. Popova, et al.
991-993	Calendar

Volume 22, Number 11 / November 1992

995-1001	Development of alloy electrocatalysts for phosphoric acid fuel cells (PAFC)	P. Stonehart
1002-1010	Nodulation of electrodeposited copper in the presence of thiourea	D. F. Suarez and F. A. Olson
1011-1016	Transient measurements at the wall-jet ring disc electrode	R. G. Compton, A. C. Fisher, M. H. Latham, C. M. A. Brett and A. M. C. F. Oliveira Brett
1017-1024	Amorphous nickel-valve metal-platinum group metal alloy electrodes for hydrogen-oxygen sulphuric acid fuel cells	Y. Hayakawa, A. Kawashima, H. Habazaki, K. Asami and K. Hashimoto
1025-1030	Raney-nickel activated H₂-cathodes Part I: Modelling the current/voltage behaviour of flat Raney-nickel coated microporous electrodes	S. Rausch and H. Wendt
1031-1038	Raney nickel activated H₂-cathodes Part II: Correlation of morphology and effective catalytic activity of Raney-nickel coated cathodes	Th. Boruciński, S. Rausch and H. Wendt
1039-1048	Development of long-lived high-performance zinc-calcium/nickel oxide cells	R. Jain, T. C. Adler, F. R. McLarnon and E. J. Cairns
1049-1054	Lanthanum phosphate-bonded composite nickel electrodes for alkaline water electrolysis	H. Dumont, P. W. Wrona, J. M. Lalancette, H. Ménard and L. Brossard
1055-1059	Galvanostatic electrochemical reduction of pentoses	L. Piszczek, K. Gieŀdon and Sz. Wojtkowiak
1060-1064	Anion exchange activity of electrochemically bonded ethylene diamine on carbon fibres	S. Antoniadou, A. D. Jannakoudakis, P. D. Jannakoudakis and E. Theodoridou
1065-1071	Comportement electrochimique des alliages d'aluminium 2024 ET 7075 dans un milieu salin	S. Berrada, M. Elboujdaini and E. Ghali
1072-1076	Glassy carbon surface effects on the electroreduction of aromatic carbonyl compounds Part III: Vanillin	M. Chandrasekaran, M. Noel and V. Krishnan
1077-1081	Electrochemical reduction of nitrogen oxyanions in 1 M sodium hydroxide solutions at silver, copper and CuInSe₂ electrodes	S. Cattarin
1082-1086	Product-selective electroreduction of 2,3,4,5,6-pentafluorobenzoic acid to 2,3,5,6-tetrafluorobenzyl alcohol and 2,3,5,6-tetrafluorobenzaldehyde in a flow cell system	N. Sato, A. Yoshiyama, P. -C. Cheng, T. Nonaka and M. Sasaki
1087-1090	Synthesis of chloroanilines at a Ti/ceramic TiO₂-cathode	C. Ravichandran, D. Vasudevan, S. Thangavelu and P. N. Anantharaman
1091-1094	Mass transfer at rotating ring-cone electrodes	L. J. J. Janssen
1095-1103	Electrochemical study of surface oxidation and collectorless flotation of arsenopyrite	X. -H. Wang, E. Ahlberg and K. S. E. Forssberg
1104-1109	Inhibiting and accelerating effects of some quinolines on the corrosion of zinc and some binary zinc alloys in HCl solution	M. S. Abdel-All, Z. A. Ahmed and M. S. Hassan
1110-1112	Electronic conductivity of salt-rich Li−LiCl melts	J. Liu and J. -C. Poignet
1113-1116	Numerical calculation of secondary current distribution in a two-dimensional electrochemical cell with a resistive electrode	H. Kawamoto
1117	Book reviews	K. Scott and D. Pletcher
1118-1120	Calendar

Volume 22, Number 12 / December 1992

ii	Corrigendum	B. V. Tilak and S. D. Fritts
1121-1128	Electrochemical impedance spectroscopy of small Ni−Cd sealed batteries: Application to state of charge determinations	Ph. Blanchard
1129-1134	Pitting corrosion of polycrystalline annealed copper in alkaline sodium perchlorate solutions containing benzotriazole	M. M. Laz, R. M. Souto, S. González, R. C. Salvarezza and A. J. Arvia
1135-1141	Characterization of hydrogen evolution on cobalt electrodeposits in water electrolysis	M. Rojas, C. L. Fan, H. J. Miao and D. L. Piron
1142-1146	A comparative study of the electrochemical corrosion behaviour of dental amalgams	B. Westerhoff, M. Darwish and R. Holze
1147-1154	A hydrodynamic model for water decomposition in electrolyzers with a solid polymer electrolyte	A. B. Goldberg, L. I. Kheifets, A. G. Vaganov, S. G. Ogryz'ko-Zhukovskaya and A. V. Shabalin
1155-1160	Experimental investigation of the primary and secondary current distribution in a rotating cylinder Hull cell	C. Madore, M. Matlosz and D. Landolt
1161-1166	The role of mass transfer in the electrolytic reduction of hexavalent chromium at gas evolving rotating cylinder electrodes	A. Radwan, A. El-Kiar, H. A. Farag and G. H. Sedahmed
1167-1174	Bifunctional electrodes for an integrated water-electrolysis and hydrogen-oxygen fuel cell with a solid polymer electrolyte	J. Ahn and R. Holze
1175-1179	Effects of Ta, La and Nd additions on the corrosion behaviour of aluminium bronze in mineral acids	R. N. Singh, S. K. Tiwari and W. R. Singh
1180-1184	Automatic measurement of the conductivity of an electrolyte solution by FFT electrochemical impedance spectroscopy	J. -P. Diard, P. Landaud, B. Le Gorrec and C. Montella
1185-1191	Chlorate electrosynthesis current efficiency equations based on dimensionless groups	H. Vogt
1192-1196	Electrocatalytic reduction ofo andm-nitroanilines at a Ti/ceramic TiO₂ cathode	C. Ravichandran, D. Vasudevan and P. N. Anantharaman
1197-1200	A comparative study of electrochemical reactor configurations for the decomposition of copper cyanide effuent	M. L. Lin, Y. Y. Wang and C. C. Wan
1201-1204	Electrolytic preparation of magnesium chlorate from magnesium chloride	S. Vasudevan, S. Pushpavanam, S. Mohan and K. C. Narasimham
1205-1207	Calendar
1208	Book Review

Volume 23, Number 1 / January 1993

1-10	Rechargeable lithium battery anodes: alternatives to metallic lithium	D. Fauteux and R. Koksbang
11-18	The nature of the passive film on cathodically modified stainless steels	J. H. Potgieter, W. Skinner and A. M. Heyns
19-25	Estimation of corrosion conditions of a phosphoric acid fuel cell	K. Mitsuda, T. Murahashi, M. Matsumoto and K. Usami
26-31	Determination of overall mass transport coefficients in gas diffusion electrodes	J. J. T. T. Vermeijlen and L. J. J. Janssen
32-37	A unitized approach to regenerative solid polymer electrolyte fuel cells	Hari P. Dhar
38-43	Studies of space-averaged mass transport in the FM01-LC laboratory electrolyser	C. J. Brown, D. Pletcher, F. C. Walsh, J. K. Hammond and D. Robinson
44-50	Electrochromic characteristics of a complementary tungsten trioxide/Prussian blue cell	M. A. Habib and S. P. Maheswari
51-55	Physical properties of the ternary electrolyte potassium ferri-ferrocyanide in aqueous sodium hydroxide solution in the range 10–90°C	H. Saraç, M. A. Patrick and A. A. Wragg
56-59	Isolation and purification of iminodiacetic acid from its sodium salt by electrodialysis	J. R. Ochoa G., J. Santa-Olalla G., A. Diego Z. and J. L. Martin R.
60-65	The anode-support system: an alternative for the electrorefining of tin in sulphuric acid medium	R. E. Gana, M. G. Figueroa, L. Kattan and J. M. Orpinas
66-71	On the kinetics of lead electrodeposition in fluorosilicate electrolyte Part I: Inhibiting effect of sodium lignin sulphonate	L. Muresan, L. Oniciu and R. Wiart
72-77	Interpretation des diagrammes E-pH du systeme Fe-H₂O en relation avec la fragilisation caustique des aciers	Huy Ha Le and E. Ghali
78-81	Electrical conductivity of low melting baths for aluminium electrolysis: the system Na₃AlF₆-Li₃AlF₆- AlF₃ and the influence of additions of Al₂O₃, CaF₂, and MgF₂	P. Fellner, S. Midtlyng, A. Sterten and J. Thonstad
82-85	Reticulated vitreous carbon cathodes for metal ion removal from process streams Part III: Studies of a single pass reactor	D. Pletcher, I. Whyte, F. C. Walsh and J. P. Millington
86-88	The contact angle between water and the surface of perfluorosulphonic acid membranes	T. A. Zawodzinski, S. Gottesfeld, S. Shoichet and T. J. McCarthy
89-92	Calendar

Volume 23, Number 2 / February 1993

93-97	Determination of the diffusion coefficient of an inserted species by impedance spectroscopy: application to the H/H_xNb₂O₅ system	R. Cabanel, G. Barral, J. -P. Diard, B. Gorrec and C. Montella
98-102	Wall jet electrodes: the importance of radial diffusion	R. G. Compton, A. C. Fisher, M. H. Latham, R. G. Wellington and C. M. A. Brett, et al.
103-107	Chlorate and oxygen formation in alkali chloride membrane electrolysis	D. Bergner and M. Hartmann
108-112	Electrochemical oxidation of phenol for wastewater treatment using SnO₂, anodes	Ch. Comninellis and C. Pulgarin
113-119	Effect of gas evolution on dispersion in an electrochemical reactor	W. S. Wu, G. P. Rangaiah and M. Fleischmann
120-124	Methanol oxidation at carbon supported Pt and Pt-Ru electrodes: an on line MS study using technical electrodes	S. Wasmus and W. Vielstich
125-134	Aluminium alloys in sulphuric acid Part I: Electrochemical behaviour of rotating and stationary disc electrodes	F. Holzer, S. Müller, J. Desilvestro and O. Haas
135-140	Hydrogen evolution reaction on Ni-Al electrodes	P. Los, A. Rami and A. Lasia
141-150	Effect of added polymer traces in crystal growth: electrochemical simulation	C. Deslouis, F. Lefaucheux, M. C. Robert and C. Rinaudo
151-156	Conductivity and viscosity studies of ethylene carbonate based solutions containing lithium perchlorate	P. V. S. S. Prabhu, T. Prem Kumar, P. N. N. Namboodiri and R. Gangadharan
157-161	Electrochemical determination of rusted steel surface stability	S. Feliu, J. M. Bastidas, J. C. Galvan, J. Simancas and M. Morcillo, et al.
162-166	Anodic behaviour of amorphous electroplated alloy coatings	M. Kjuchukova, G. Raichevski and S. Vitkova
167-172	Mass transfer at gas sparged spherical electrodes	G. H. Sedahmed
173-177	Mechanistic aspects and electrosynthesis of rose oxide through anodic cyclization of citronellol	L. A. Faria, J. R. Romero and J. F. C. Boodts
178-181	Calendar

Volume 23, Number 3 / March 1993

183-186	The effect of dissolved oxygen on the deposition process in electroless cobalt plating	H. Matsuda and O. Takano
187-189	Electrochemical and reflectance study of the conversion of zinc oxide by hexacyanoferrate (II) in offset lithography	D. R. Rosseinsky and A. M. Soutar
190-196	Electrochemical and reflectance study of the conversion of zinc oxide by hexacyanoferrate (II) in offset lithography	D. R. Rosseinsky, J. D. Slocombe and A. M. Soutar
197-202	Direct electrooxidation of methanol on highly dispersed platinum-based catalyst electrodes: temperature effect	G. Méli, J. -M. Léger, C. Lamy and R. Durand
203-211	Ac impedance spectroscopy of calcium carbonate scales	R. G. Compton and C. A. Brown
212-216	Characterization of polypyrrole films incorporating various anions	Hecai Sun and Biantung Sun
217-224	Electrodeposition of titanium from chloride melts	G. M. Haarberg, W. Rolland, Å. Sterten and J. Thonstad
225-230	Cyclic voltammetric studies of nickel hydroxide and cobalt hydroxide thin films in alkali and alkaline earth metal hydroxides	P. Vishnu Kamath and M. F. Ahmed
231-240	Unipolar and bipolar pulsed current electrodeposition for PCB production	M. R. Kalantary, D. R. Gabe and M. R. Goodenough
241-246	Advanced laboratory electrolyser for production of pure hydrogen	F. P. Dousek and K. Micka
247-252	Electropolymerization of m-cresol in the presence of trimethylamine	S. Taj, M. F. Ahmed and S. Sankarapapavinasam
253-256	The electrodeposition of aluminium from xylene and ether-hydride electrolytes	S. Biallozor, V. Mazim and M. Lieder
257-264	Aluminium deposition and redissolution at TiB₂/C composite cathodes in cryolite based melts	S. C. Rap and M. Skyllas-Kazacos
265-268	Para-nitroaniline as a depolarizer for magnesium batteries	G. Kumar, A. Sivashanmugam and N. Muniyandi
268-270	Electrochemical thiocyanation by two phase electrolysis	P. Krishnan and V. G. Gurjar
271-274	Calendar
ii	Corrigendum

Volume 23, Number 4 / April 1993

275-278	The measurement of water vapour pressure in an SOFC anode during discharge	M. Nagata and H. Iwahara
279-286	Redox chemistry of H₂S oxidation in the British Gas Stretford Process Part I: Thermodynamics of sulphur-water systems at 298 K	G. H. Kelsall and I. Thompson
287-295	Redox chemistry of H₂S oxidation by the British Gas Stretford Process Part. II: Electrochemical behaviour of aqueous hydrosulphide (HS⁻) solutions	G. H. Kelsall and I. Thompson
296-307	Redox chemistry of H₂S oxidation by the British Gas Stretford Process Part III: Electrochemical behaviour of anthraquinone 2,7 disulphonate in alkaline electrolytes	G. H. Kelsall and I. Thompson
308-315	Electrochemical production of cuprous oxide using the anode-support system	M. G. Figueroa, R. E. Gana, W. C. Cooper and J. Ji
316-321	Numerical simulation of electrochemical drilling	L. W. Hourng and C. S. Chang
322-331	Characterization of membrane-electrode assemblies for solid polymer electrolyte water electrolysis	P. Millet, T. Alleau and R. Durand
332-338	Properties of polyaniline formed at tin dioxide electrodes in weak acid solution: effect of the counterion	C. M. A. Brett, A. -M. C. F. Oliveira Brett, J. L. C. Pereira and C. Rebelo
339-345	Influence of additives on the electrodeposition of nickel from a Watts bath: a cyclic voltammetric study	T. Mimani, S. M. Mayanna and N. Munichandraiah
346-351	Investigation of the 1-methyl-3-ethylimidazolium chloride-AlCl₃/LiAlCl₄ system for lithium battery application Part I: Physical properties and preliminary chronopotentiometric study	Y. S. Fung and S. M. Chad
352-357	Oxygen reduction on stainless steel	R. Babić and M. Metikoš-Huković
358-363	Hydrogen permeation during zinc-manganese alloy plating	K. N. Srinivasan, M. Selvam and S. Venkata Krishna Iyer
364-370	Nucleation and growth of zinc electrodeposits on a polycrystalline zinc electrode in the presence of chloride ions	M. Sánchez Cruz, F. Alonso and J. M. Palacios
371-378	Potentiostatic passivation of zinc in alkaline solutions	P. L. Cabot, M. Cortes, F. Centellas and E. Perez
379-386	Effect of cobalt deposits on nickel substrates on the oxygen evolution reaction in KOH	L. Brossard and C. Messier
387-389	Studies on oxidation of arene by superoxide ions electrocatalysed by metallo-porpbyrins	S. F. Wang, H. S. Lu, S. B. Zhang and Y. J. Lin
390-392	Removal of silver using graphite-felt electrodes	V. Tricoli, N. Vatistas and P. F. Marconi
393-395	Magnesium/zinc-N,N′-dichlorodimethylhydantoin novel dry cells: a preliminary study	R. Udhayan and D. P. Bhatt
396-400	Calendar

Volume 23, Number 5 / May 1993

401-416	The electrochemical synthesis of inorganic and organometallic complexes in non-aqueous media	A. M. Vecchio-Sadus
417-426	Redox chemistry of H₂S oxidation by the British Gas Stretford process part IV: V-S-H₂O thermodynamics and aqueous vanadium (v) reduction in alkaline solutions	G. H. Kelsall, I. Thompson and P. A. Francis
427-434	Redox chemistry of H₂S oxidation by the British gas Stretford process part V: Aspects of the process chemistry	G. H. Kelsall and I. Thompson
435-442	Joule heating induced local electrodeposition for microelectronic circuits	H. Kawamoto
443-451	Calculation of ohmic resistance effects in rectangular electrodes of finite thickness	S. L. Marshall and S. K. Wolff
452-455	Determination of diffusivity and solubility of oxygen in phosphoric acid using a transit time on a rotating ring-disc electrode	F. Gan and D. -T. Chin
456-462	Influence of potential on the friction and wear of mild steel in a model aqueous lubricant	N. P. Brandon, N. Bonanos, P. O. Fogarty, M. N. Mahmood and A. J. Moore, et al.
463-470	Liquid-phase mass transfer enhancement by gas evolution at inclined plates	M. Shirkhanzadeh, M. Ajersch and L. W. Shemilt
471-476	Preparation and use of a nickel foam electrode for the production of diacetone-2-keto-L-gulonic acid from diacetone-l-sorbose in vitamin C production	J. Nanzer, S. Langlois and F. CŒuret
477-482	Electrolytic oxidation of diacetone-l-sorbose (DAS) to diacetone-2-keto-l-gulonic acid (DAG) at a nickel foam electrode	J. Nanzer, S. Langlois and F. Cœuret
483-486	Influence CO₂ partial pressure and the supporting electrolyte cation on the product distribution in CO₂ electroreduction	G. Z. Kyriacou and A. K. Anagnostopoulos
487-494	A mixture design approach to the service life and the oxygen evolving catalytic activity of Ru-Sn-Ti ternary oxide coated electrodes	Shih-Min Lin and Ten-Chin Wen
495-499	Activation effect of halides on chromium electrodeposition from chromic acid baths	J. -L. Fang, N. -J. Wu and Z. -W. Wang
500-507	Galvanic black anodizing on Mg-Li alloys	A. K. Sharma, R. Uma Rani, H. Bhojaraj and H. Narayanamurthy
508-515	Relation between the presence of inhibitors and deposit morphology in nickel deposition	E. Vallés, R. Pollina and E. Gómez
516-519	Thermogalvanic cells with aqueous redox couples and temperature differences larger than 100 K	T. Ikeshoji and R. S. Gonçalves
520-526	News

Volume 23, Number 6 / June 1993

527	Editorial	A. A. Wragg
529	Brian E. Conway	S. Trasatti and A. A. Wragg
531-546	Somein situ STM contributions to the characterization of electrochemical systems	A. González-Martín, R. C. Bhardwaj and J. O'M. Bockris
547-552	Combined radiometric and electrochemical study of the behaviour of Tc (vii) ions at gold and platinized surfaces in acidic media	G. Horányi and I. Bakos
553-558	Automated setup for impedance measurements of electrochemical cells with two electrodes	J. R. Dygas, G. Fafilek, H. Durakpasa and M. W. Breiter
559-566	Cathodic behaviour of IrO₂ electrodes in alkaline solution Part I: Electrochemical surface characterization	H. Chen and S. Trasatti
567-572	Photon-driven reduction reactions on silver	R. Kostecki and J. Augustynski
573-582	The electrocatalytic behaviour of palladium in acid and base	L. D. Burke and J. K. Casey
583-588	Anomalous features of thallium oxide electrodeposited layers and room temperature HTSC electrosynthesis	O. A. Petrii, G. A. Tsirlina, T. V. Rakova and S. Yu. Vassiliev
589-596	Analysis of irreversible oxidation wave of adsorbed CO at Pt(1 1 1), Pt(1 0 0) and Pt(1 1 0) electrodes	H. Kita, H. Narumi, S. Ye and H. Naohara
597-605	Temperature dependence of the Tafel slope for oxygen reduction on platinum in concentrated phosphoric acid	S. J. Clouser, J. C. Huang and E. Yeager
606-614	Investigations of nonlinear processes by transients: kinetics of dissolution of inhibitor layers on copper	M. Beier, M. M. Lohrengel and J. W. Schultze
615-624	Thermoanalytical investigation on the formation of IrO₂-based mixed oxide coatings	J. Kristóf, J. Liszi, P. Szabó, A. Barbieri and A. Battisti
625-630	Reduction of oxygen in an acidic methanol/oxygen (air) fuel cell: an online MS study	B. Bittins-Cattaneo, S. Wasmus, B. Lopez-Mishima and W. Vielstich
631-640	Generalized analytical expressions for Tafel slope, reaction order and a.c. impedance for the hydrogen evolution reaction (HER): mechanism of HER on platinum in alkaline media	B. V. Tilak and C. -P. Chen
641-645	Mechanistic study of the hydrogen evolution reaction on Ni-Zn and Ni-S cathodes	M. J. Giz, M. Ferreira, G. Tremiliosi-Filho and E. R. Gonzalez
646-654	Reversible ageing of iridium oxide electrodes in acidic solutions	H. Elzanowska and V. I. Birss
655-661	Electroformation of electrocatalytically active hydrous oxide layers on a Co-Ni amorphous alloy under pulsating electrolysis	W. E. Triaca, A. J. Arvia and T. Kessler
662-668	Transition layer thickness in microlaminar deposits	A. R. Despić and T. LJ. Trišović
669-673	Calendar
674-675	Call for papers

Volume 23, Number 7 / July 1993

677-683	Duet electrosynthesis Part II: 1,4-naphthoquinone from naphthalene	S. Ito, Y. Kuroda, M. Iwata, K. Sasaki and A. Okazaki
684-692	Studies of the hydrogen evolution reaction on lanthanum phosphate-bonded composite nickelruthenium electrodes in 1 M alkaline solutions	H. Dumont, P. Los, A. Lasia, H. Ménard and L. Brossard
693-706	Role of dissolution of Mn(iii) species in discharge and recharge of chemically-modified MnO₂ battery cathode materials	D. Y. Qu, B. E. Conway, L. Bai, Y. H. Zhou and W. A. Adams
707-714	Cylindrical three-dimensional electrodes under limiting current conditions	G. Kreysa, K. Jüttner and J. M. Bisang
715-727	Optimal time-varying potential control	R. Bakshi and P. S. Fedkiw
728-734	Electrochemical and oxygen reduction behaviour of solid silver-bismuth/antimony electrodes in KOH solutions	I. Arul Raj and K. I. Vasu
735-740	Chemical and electrochemical behaviour of nickel ions in the ZnCl₂-2NaCl melt at 450°C	D. Ferry, G. Picard and Y. Castrillejo
741-744	Some dynamic regression simulated equations for electrochemical doping processes of polypyrrole	Hecai Sun and Bianting Sun
745-752	Electrogenerative oxidation of ferrous ions with graphite electrodes	J. Lee, H. B. Darus and S. H. Langer
753-759	Electrochemical formation of Ni-Y intermetallic compound layer in molten chloride	G. Xie, K. Ema, Y. Ito and Zhao Min Shou
760-762	An improved method for kinetic investigations of electrochemical reactions with gas evolution	D. Popov, E. Stoyanova and D. Stoychev
763-765	Electrowinning of zinc at high current density in the presence of some surfactants	M. Karavasteva and St. Karaivanov
766-770	Calendar

Volume 23, Number 8 / August 1993

771-774	Selective detection of acetylene gas extracted from isolation oil by an electrochemical sensor using a gold electrode	T. Ishiji and K. Takahashi
775-780	Effect of nickel on the electrodeposition of copper	J. Crousier and I. Bimaghra
781-789	Anodic formation of polypyrrole/tungsten trioxide composites	F. Beck and M. Dahlhaus
790-800	Mechanism of the cathode reaction in sodium-ferrous chloride secondary cells	J. Coetzer, G. D. Wald and S. W. Orchard
801-807	Comportement electrochimique de NbCl₅ en milieu NaCl-KCl pur et additionne d'ions fluorure	A. Khalidi and J. Bouteillon
808-812	Electrochemical synthesis of cosin from fluorescein	D. Vasudevan and P. N. Anantharaman
813-818	Direct electrorefining of copper scrap using an anode-support system in a bipolar cell	R. Gana, M. Figueroa, L. Kattan and S. Castro
819-826	Dissolution of pastes in lead-acid battery recycling plants	M. Maja, S. Bodoardo, C. Serracane and R. Baudino
827-834	Conducting polymer films of 4(5-chloro-2-pyridylazo)1,3-diaminobenzene and its cobalt complex Part I: Anodic polymerization in aqueous solutions	H. A. Abd El-Rahman and H. H. Rehan
835-840	Electropolymerisation de monomere 3-amino-1,2,4-triazole sur une electrode de cuivre et effet du polymere sur la corrosion de l'electrode en milieu NaCl 3%	S. Kertit, J. Aride, A. Srhiri, A. Ben-Bachir and K. El-Kacemi, et al.
841-847	Electroinduced S_RN 1 preparative reactions part 1: Estimation of the limiting diffusion currents on various cathodic materials in liquid ammonia and dimethylformamide	C. Combellas, Y. Lu and A. Thiebault
848-850	Conversion of hypochlorite at a hydrogen gas-diffusion anode	L. J. J. Janssen
851-852	Electrolytic preparation of 2-osuloses: a route to L-ascorbic acid	P. A. García Ruiz, Andrés Zapata, F. V. Barba and J. R. G. Ochoa
853-855	A flow-through porous electrode patented 100 years ago: the Hulin process	F. Cœuret
856-859	Calendar
860-861	News item

Volume 23, Number 9 / September 1993

863-872	Maskless zinc electrodeposition assisted by a pulsed laser beam	I. Zouari, C. Pierre, F. Lapicque and M. Calvo
873-886	Analysis of flow-through porous electrode cell with homogeneous chemical reactions: application to bromide oxidation in brine solutions	Jian Qi and R. F. Savinell
887-896	Development of the flow-through porous electrode cell for bromide recovery from brine solutions	Jian Qi and R. F. Savinell
897-904	A novel electrochemical process for the production of ammonium perchlorate	R. L. Dotson
905-909	Electrosynthesis of glyoxylic acid using a continuously electrogenerated lead cathode	J. R. Ochoa, A. De Diego and J. Santa-Olalla
910-914	Electrosynthesis of iminodiacetic acid from nitrilotriacetic acid	J. R. Ochoa
915-921	Hydrogen evolution reaction (h.e.r.) in an acidic or basic medium on nickel electrodeposited with PW₁₂O	O. Savadogo and E. Ndzebet
922-926	Effect of additives on the anodic codeposition of lead dioxide and polypyrrole	D. Velayutham and M. Noel
927-932	Experimental investigation of the terminal effect in lead electrodeposition onto resistive substrates	P. -H. Vallotton, M. Matlosz and D. Landolt
933-942	Operational characteristics of laboratory scale alumina reduction cells with wettable cathodes	R. Dorin and E. J. Frazer
943-946	Hydroxylation of chlorobenzene and phenol in a packed bed flow reactor with electrogenerated Fenton's reagent	Y. -L. Hsiao and K. Nobe
947-950	Mechanisms of the discharge of porous-iron electrodes in alkaline medium	T. S. Balasubramanian, K. Vijayamohanan and A. K. Shukla
951-955	Calendar
955-956	News items

Volume 23, Number 10 / October 1993

957-965	Characterization of anodically formed polypyrrole/tungsten trioxide composites	M. Dahlhaus and F. Beck
966-974	Effect of mass transfer on the current distribution in monopolar and bipolar electrochemical reactors with a gas-evolving electrode	J. M. Bisang
975-984	Direct production of butyltin chlorides from a paired electro-organic synthesis	P. Parsons-Wingerter and R. F. Savinell
985-990	Hydrogen evolution in alkaline water on cobalt electrodeposits prepared from baths containing different anions	C. L. Fan, D. L. Piron, H. J. Miao and M. Rojas
991-995	Performance of acrylate-poly(ethylene oxide) polymer electrolytes in lithium batteries	R. Borkowska, J. Laskowski, J. Płocharski, J. Przyłuski and W. Wieczorek
996-1010	Ozone generation via the electrolysis of fluoboric acid using glassy carbon anodes and air depolarized cathodes	P. C. Foller and G. H. Kelsall
1011-1016	Mechanism of the reverse dissolution of zinc in the presence of nickel Part I: Influence of anodic products and substrate purity	C. Cachet, R. Wiart, I. Ivanov and S. Rashkov
1017-1024	Effect of impurities on the corrosion behaviour of neodymium	H. Bala, S. Szymura, G. Pawłowska and Yu. M. Rabinovich
1025-1030	Development and evaluation of a Pt-Ru bimetallic catalyst based alkali concentrator in NaOH solutions	S. M. A. Shibli and M. Noel
1031-1038	Thin film polyaniline-polyaniline electrochemical cells	J. Y. Lee, L. H. Ong and G. K. Chuah
1039-1044	Structure-reactivity relationships: the oxidation of aliphatic diols on a gold electrode	T. Łuczak, M. Bełtowska-Brzezinska and R. Holze
1045-1050	Application of metallic foams in electrochemical reactors of filter-press type Part I: Flow characterization	A. Montillet, J. Comiti and J. Legrand
1051-1055	Factors affecting the characteristics of the negative electrodes for nickel-hydrogen batteries	K. Naito, T. Matsunami, K. Okuno, M. Matsuoka and C. Iwakura
1056-1062	Kinetic model of anodic oxidation of titanium in sulphuric acid	B. J. Hwang and J. R. Hwang
1063-1068	Voltametric behaviour of Ti_nO_2n−1 ceramic electrodes close to the hydrogen evolution reaction	J. Przyłuski and K. Kolbrecka
1069-1075	Phenol electropolymerization on phosphated mild steel via zinc electrodeposition	M. M. Musiani, F. Furlanetto, P. Guerriero and J. Heitbaum
1076-1081	Calendar
1080-1081	News items

Volume 23, Number 11 / November 1993

1083-1088	Development of an electroless CoNiZnP solution for high coercivity films	H. Matsuda and O. Takano
1089-1096	First stages of the formation of copper electrodeposits and copper sputtered deposits on amorphous carbon and polycrystalline silver substrates	P. Brande and R. Winand
1097-1101	Potentiodynamic estimation of sensitization of 347 grade SS superheater tubes Part I: Effect of surface finish, scan rate and solution temperature	D. P. Schweinsberg, B. Sun, M. Cheng and H. Flitt
1102-1106	An electrochemical Nafion® matrix oxygen sensor and the evaluation of oxygen permeation in coated films	Y. Gao, H. Kita, Y. Watanabe and K. Sima
1107-1116	A.c.-impedance spectroscopy study of oxygen reduction at Nafion® coated gas-diffusion electrodes in sulphuric acid: Teflon loading and methanol cross-over effects	A. S. Aricò, V. Antonucci, V. Alderucci, E. Modica and N. Giordano
1117-1124	Polarization and back em.f. in electrodialysis	S. J. Judd, G. S. Solt and T. Wen
1125-1131	Electrochemical synthesis in an undivided cell of aromatic mono and dichalcogeno derivatives by S_RN1 substitution reactions in MeCN	M. Genesty, C. Thobie, A. Gautier and C. Degrand
1132-1138	Corrosion and hydrogen surface embrittlement inhibition of amorphous FeBSiC alloy in molar HCl by diorthoaminodiphenyldisulphane (DOAPD)	S. Kertit, J. Aride, A. Ben-Bachir, A. Srhiri and M. Etman
1139-1146	Effect of gas evolution on mass transfer in an electrochemical reactor	W. S. Wu and G. P. Rangaiah
1147-1150	Evaluation of transport properties of cation exchange membranes for application in alkali concentrators	S. M. A. Shibli and M. Noel
1151-1161	A modelling approach to the optimizaton of lead-acid battery electrodes	G. Maia, E. A. Ticianelli and E. R. Gonzalez
1162-1168	Preparation and catalytic efficiency of mixed noble metal catalysts on electrochemically activated carbon fibre supports	A. D. Jannakoudakis, P. D. Jannakoudakis, N. Pagalos and E. Theodoridou
1169-1174	Electrochemical investigation of the autocatalytic deposition of Ni-Cu-P alloys	E. Chassaing, M. Cherkaoui and A. Srhiri
1175-1180	Electrodissolution of aluminium thin film microband electrodes	E. J. Lee and S. -I. Pyun
1181-1186	A phenomenological approach to ionic mass transfer at rotating disc electrodes with a hanging column of electrolyte solution	C. I. Elsner, P. L. Schilardi and S. L. Marchiano
1187-1195	Thin metal oxide films on transparent substrates for Li-insertion devices	S. Passerini, J. Scarminio, B. Scrosati, D. Zane and F. Decker
1196-1198	An electrogenerative acidobasic cell utilizing biomass for the generation of electricity and molecular hydrogen	D. Kyriacou and E. G. E. Jahngen
1199-1205	Book reviews	Rudolf Holze, N. P. Brandon and Colin Boxall
1202-1205	Calendar

Volume 23, Number 12 / December 1993

1207-1213	Kinetics of the electroreduction of anodically formed cadmium oxide layers in alkaline solutions	J. I. Urraza, C. A. Gervasi, S. B. Saidman and J. R. Vilche
1214-1222	Modelling of the sodium-ferrous chloride electrochemical cell	S. W. Orchard and J. S. Weaving
1223-1231	Analysis of spontaneous electrochemical noise for corrosion studies	P. R. Roberge
1232-1236	Current efficiency and crystallization mechanism in pulse plating of hard chromium	P. Leisner, G. Bech-Nielsen and P. Møller
1237-1243	Mass transport in a hydrogen gas diffusion electrode	J. J. T. T. Vermeijlen and L. J. J. Janssen
1244-1250	Hydrated structures in the anodic layer formed on lead electrodes in H₂SO₄ solution	B. Monahov and D. Pavlov
1251-1258	Ceramic electrodes for an alkali metal thermo-electric converter (AMTEC)	H. Nakata, T. Nagata, K. Tsuchida and A. Kato
1259-1262	Paired electro-oxidation Part II: Production of anthraquinone in an undivided cell	A. -C. Lee and T. -C. Chou
1263-1267	Measurement of anode potentials at high current densities by the current interruption method for metals used in aviation technology	J. Híveš and I. Roušar
1268-1272	Behaviour of tungsten carbide hydrogen-diffusion electrodes in chloride etching solutions	V. Nikolova, I. Nikolov, T. Vitanov and K. Wiesener
1273-1279	An electrochemical model for reduction of MnO₂ with Fe²⁺ ions	M. Bayramoglu and T. Tekin
1280-1284	Electrochemical passivation of copper-aluminium-silver alloy in sodium hydroxide solution	M. Anbu Kulandainathan, S. Venkatakrishna Iyer, R. Suresh Baba and T. Vasudevan
1285-1292	A modified Hull cell with forced electrolyte flow: simulation of industrial electroplating conditions	M. Degrez, A Duchêne, A. Fontana and R. Winand
1293-1300	Current density optimization in electrochemical synthesis	M. Gonet and A. Korczyński
1301-1309	Electrochemical regeneration of ceric sulphate in an undivided cell	J. Been and C. W. Oloman
1310-1316	A model of the electrochemical behaviour within a stress corrosion crack	Delin Li and Z. Huang
1317-1322	Current efficiency during anodic dissolution of iron to ferrate(vi) in concentrated alkali hydroxide solutions	K. Bouzek and I. Roušar
1323-1325	Interfacial supersaturation at gas evolving electrodes	H. Vogt
1326-1328	Calendar

Volume 24, Number 1 / January 1994

1-7	A submerged impinging gas jet for corrosion and electrochemical studies	B. Poulson
8-13	A CO₂ titration electrode Part I: Theoretical description	W. J. Albery and M. Uttamlal
14-17	A CO₂ titration electrode Part II: Development of the sensor	W. J. Albery, M. Uttamlal, M. S. Appleton, N. J. Freeman and B. B. Kebbekus, et al.
18-29	Solderability assessment via sequential electrochemical reduction analysis	D. Morgan Tench, D. P. Anderson and P. Kim
30-37	Hydrous oxide species as inhibitors of oxygen reduction at platinum activated fuel cell cathodes	L. D. Burke, J. K. Casey, J. A. Morrissey and J. F. O'Sullivan
38-43	Electrochemical hydrogen discharge characteristics of Pd and Pd-Ni-Rh alloy hydride electrodes catalysed by Pd/Pt-black coatings	Y. Sakamoto, K. Kurlima and Y. Naritomi
44-51	Effect of gelling on the open circuit potential against time transients of Pb/PbSO₄ electrodes at various states of charge	M. P. Vinod and K. Vijayamohanan
52-57	Effect of ion implantation on the electrochemical behaviour of electrodeposited zinc and chromated zinc layers	M. Nikolova, K. Takahashi and M. Iwaki
58-65	On the role of surface functional groups in Pt carbon interaction	P. L. Antonucci, V. Alderucci, N. Giordano, D. L. Cocke and H. Kim
66-71	Cathodic codeposition of alloyed materials for use in lithium battery negative electrodes	M. H. Chapeau-Poinso, J. Bouteillon and J. C. Poignet
72-77	Spectroelectrochemical behaviour of poly (3-octylthiophene): application to electrochromic windows with polyaniline and iridium oxide	M.-N. Collomb-Dunand-Sauthier, S. Langlois and E. Genies
78-84	Electrochemical characterization of lithium-boron composite	A. Meden, B. Pihlar and S. Pejovnik
85-88	Performance of carbon-cloth bound porous-carbon electrodes containing an electrodeposited platinum catalyst towards the electrooxidation of methanol in sulphuric acid electrolyte	M. P. Hogarth, J. Munk, A. K. Shukla and A. Hamnett
89	Book reviews	Michel Armand
90-94	Calendar

Volume 24, Number 2 / February 1994

95-106	Studies of three-dimensional electrodes in the FMO1-LC laboratory electrolyser	C. J. Brown, D. Pletcher, F. C. Walsh, J. K. Hammond and D. Robinson
107-113	Oxidation of iodide to iodate concurrently with evolution of oxygen at Kelgraf composite electrodes	J. E. Vitt and D. C. Johnson
114-118	Mechanism of the solid state battery: magnesium/ poly(thionaphtheneindole/gold)	F. Capuano, G. Casalbore-Miceli, G. Giro and B. Scrosati
119-125	Electroreduction of molecular oxygen on preferentially oriented platinum electrodes in acid solution	C. F. Zinola, A. M. Castro Luna, W. E. Triaca and A. J. Arvia
126-130	Recycling of carbon dioxide using a proton conductor as a solid electrolyte	T. Hibino, S. Hamakawa, T. Suzuki and H. Iwahara
131-138	Local structure and concentration in Al-Mn alloy electrodeposits	T. Takayama, H. Seto, J. Uchida and S. Hinotani
139-144	Mass transfer at rough gas-sparged electrodes	G. H. Sedahmed, A. Y. Hosny, O. A. Fadally and I. M. El-Mekkawy
145-148	Design of a dome-shaped aluminium water battery	P. K. Shen, A. C. C. Tseung and C. Kuo
149-156	Preparation and characterization of thin films of LaNiO₃ for anode application in alkaline water electrolysis	R. N. Singh, L. Bahadur, J. P. Pandey, S. P. Singh and P. Chartier, et al.
157-165	Electrochemical stripping of gold from Au-Ni-Cu electronic connector scrap in an aqueous solution of thiourea	J. -C. Lin and J. -J. Huarng
166-178	Electrochemical copolymerization of aniline and para-phenylenediamine on IrO₂-coated titanium electrode	C. -H. Yang and T. -C. Wen
179-183	Inhibition effect of sodium boro-gluconate on mild steel with and without nitrite ions in low chloride containing water	I. B. Singh, G. Venkatachari and K. Balakrishnan
184-188	Calendar

Volume 24, Number 3 / March 1994

189-194	Origin of ohmic losses at Co₃O₄/Ti electrodes	D. Baronetto, I. M. Kodintsev and S. Trasatti
195-200	On the origins of cathode hyperpolarization effects in electrolytic fluorine production from KF · 2HF melts	S. Y. Qian and B. E. Conway
201-205	Nucleation and growth of nickel by electrodeposition under galvanostatic conditions	P. Vanden Brande, A. Dumont and René Winand
206-211	Direct electrorefining of copper scrap using a titanium anode-support system in a monopolar cell	M. Figueroa, R. Gana, L. Kattan and A. Parodi
212-218	Mathematical modelling of electrode growth	J. Deconinck
219-226	Electrocatalytic oxidation of methanol and C1 molecules on highly dispersed electrodes Part 1: Platinum in polyaniline	H. Laborde, J.-M. Léger and C. Lamy
227-232	Effects of saccharin and aliphatic alcohols on the electrocrystallization of nickel	Y. Nakamura, N. Kaneko, M. Watanabe and H. Nezu
233-238	Sulphur content and the hydrogen evolving activity of NiS_x deposits using statistical experimental strategies	T.-C. Wen, S.-M. Lin and J.-M. Tsai
239-244	Electrochemical reduction of silver thiosulphate complexes Part I: Thermodynamic aspects of solution composition	A. Hubin and J. Vereecken
245-249	Influence of heat treatment of CrO₃-graphite intercalation compounds on subsequent electrochemical intercalation of sulphuric acid	J. M. Skowroński
250-255	Corrosion behaviour of Ti-6Al-4V in phosphoric acid	V. B. Singh and S. M. A. Hosseini
256-260	A simple and novel method for preparing Ni(OH)₂ Part I: Structural studies and voltammetric response	M. J. Avena, M. V. Vazquez, R. E. Carbonio, C. P. Pauli and V. A. Macagno
261-267	A boundary element method for transient diffusion	A. C. West and M. Matlosz
268-270	A hydrocarbon sensor using a high temperature-type proton conductor	T. Hibino and H. Iwahara
271-273	Production of tartrate and glycolate from the electrochemical reduction of glyoxylate	B. R. Eggins, C. Ennis and J. T. S. Irvine
274-276	Book reviews	K. Scott, A. T. Kuhn and D. J. Schiffrin
277-281	Calendar

Volume 24, Number 4 / April 1994

283-287	Direct electrodeposition of poly(pyrrole) on continuous carbon-loaded microporous membrane films	P. Kathirgamanathan, A. M. Souter and D. Baluch
288-297	Studies to improve the Li/SO₂Cl₂ cell	M. Alamgir and K. M. Abraham
298-302	A polyacrylonitrile-based gelled electrolyte: electrochemical kinetic studies	G. Nagasubramanian, A. I. Attia and G. Halpert
303-309	Effect of flow characteristics on the diffusion-limited current density in an electrodeposition cell	L. Vanhée, J. C. Monnier, R. Winand and M. Stanislas
310-315	Kinetics and mechanism of the oxygen evolution reaction at oxide-coated Co-Ni amorphous alloy electrodes	T. Kessler, W. E. Triaca and A. J. Arvia
316-320	Performance characteristics of a certain class of electrolysers	T. Z. Fahidy and R. E. Sioda
321-324	Determination of the diffusion coefficient of yttrium in the Ni₂Y phase	G. Xie, K. Ema and Y. Ito
325-331	Inhibition of the hydrogen evolution reaction on aluminium covered by ‘spontaneous’ oxide	M. Metikos-Hukovic, R. Babić, Z. Grubać and S. Brinć
332-336	Kinetics of lead deposition in fluorosilicate electrolyte Part II: Inhibiting effect of horse-chestnut extract (HCE) and of sodium lignin sulphonate-HCE mixtures	L. Muresan, L. Oniciu and R. Wiart
337-343	Electrochemical reduction of polyaromatic compounds	E. Gagyi Palffy, P. Starzewski, A. Labani and A. Fontana
344-349	Comparative study of copper behaviour in bicarbonate and phosphate aqueous solutions and effect of chloride ions	M. Drogowska, L. Brossard and H. Ménard
350-354	Effect of some variables on the electroplating of zinc from acidic acetate baths	S. S. Abd El Rehim, S. M. Abd El Wahaab, E. E. Fouad and H. H. Hassan
355-360	Inhibiting and accelerating effects of aminophenols on the corrosion and permeation of hydrogen through mild steel in acidic solutions	S. Rengamani, S. Muralidharan, M. Anbu Kulandainathan and S. Venkatakrishna Iyer
361-367	Cyclic voltammetry at a metallic electrode: application to the reduction of nickel, tantalum and niobium salts in fused electrolytes	F. Lantelme, Y. Berghoute and A. Salmi
368	Surface modification of a MCFC anode by electrodeposition of yttrium	G. Xie, K. Ema and Y. Ito
371-376	Calendar
376	Books received

Volume 24, Number 5 / May 1994

377-383	Industrial applications of a mathematical model for the zinc electrowinning process	G. W. Barton and A. C. Scott
384-389	Application of metallic foams in electrochemical reactors of the filter-press type: Part II Mass transfer performance	A. Montillet, J. Comiti and J. Legrand
390-395	Thermodynamic descriptions of oxygen redistribution in a nuclear fuel pellet: Heat of transport of oxygen in mixed conductors	M. Kamata and T. Esaka
396-403	Electrochemical reduction of silver thiosulphate complexes Part II Mechanism and kinetics	A. Hubin and J. Vereecken
404-410	Synergistic effects of benzalacetone and benzophenone on the electrocrystallization of tin from acid stannous sulphate solutions	Y. Nakamura, N. Kaneko, M. Nakamura and H. Nezu
411-419	Synthesis and electrochemical properties of an oxide electrode layer prepared by a new electroless plating technique	M. Nagata, H. Hotta and H. Iwahara
420-425	Anodic behaviour of copper during electrorefining using a rotating ring-disc electrode	L. Mirkova and St. Rashkov
426-433	Anodic film growth on Ru/Pt electrodes in HClO₄ and HCl solutions	F. Colom and M. J. González-Tejera
434-438	Electrochemical reduction of benzaldehyde using Pt-Pb/Nafion® as electrode	Y.-L. Chen and T.-C. Chou
439-448	Effect of complexing agent (citric acid) and pH on the cathodic deposition of As-Sb alloys	S. Cattarin, F. Furlanetto, M. M. Musiani and P. Guerriero
449-454	Electrooxidation of benzyl alcohol at high surface area nickel (NiS_x) electrodes in alkaline solution	T.-C. Wen, S.-M. Lin and J.-M. Tsai
455-459	Effect of polypyrrole film on the stability and electrochemical activity of fluoride based graphite intercalation compounds in HF media	M. Noel, R. Santhanam and M. Francisca Flora
460-462	Effect of surface protonation on the voltammetric behaviour of para chlorobenzophenone on glassy carbon	M. Chandrasekaran, M. Noel and V. Krishnan
463-468	Calendar

Volume 24, Number 6 / June 1994

469-474	Scale-up of bipolar electrode stack dimensionless numbers for current bypass estimation	G. Bonvin and Ch. Comninellis
475-480	Coplanar interdigitated band electrodes for synthesis Part I: Ohmic loss evaluation	C. Belmont and H. H. Girault
481-488	Dynamic analysis of charge transport in fluidized bed electrodes: Impedance techniques for electroactive beds	C. Gabrielli, F. Huet, A. Sahar and G. Valentin
489-494	Polymer electrolyte-type electrochemical ozone generator with an oxygen cathode	M. Katoh, Y. Nishiki and S. Nakamatsu
495-502	Current behaviour under periodic excitation during the anodic dissolution of copper	Z. H. Gu, J. Chen and T. Z. Fahidy
503-508	Current efficiency in the chlorate cell process with an oxygen cathode (III): a gas analysis method for chlorate current efficiency	Y. Baolian and Z. Wenhua
509-512	Anodic oxidation of cyanide on a reticulated three-dimensional electrode	P. Tissot and M. Fragniere
513-520	Interaction of galena with hydrosulphide ions under controlled potentials	A. N. Buckley, I. M. Kravets, A. V. Shchukarev and R. Woods
521-524	Development of an electrochemical workstation for monitoring the fermentation of beer	W. J. Albery, M. S. Appleton, T. R. D. Pragnell, M. J. Pritchard and M. Uttamlal, et al.
525-530	Limiting current density and specific energy consumption in electrochemical cells with inert turbulence promoters	V. D. Stanković
531-541	Kinetics and mechanism of the electrochemical reduction of molecular oxygen on platinum in KOH: influence of preferred crystallographic orientation	C. F. Zinola, A. M. Castro Luna, W. E. Triaca and A. J. Arvia
542-547	Electrochemical production of cuprous oxide and metallic nickel in a two-compartment cell	R. Gana, M. Figueroa, A. Aragón, M. T. San Martín and L. Kattan
548-553	Electrochemically assisted metal uptake by cation exchange based chemically modified electrodes	W. S. Wu, M. S. Uddin, H. Chi and K. Hidajat
554-558	Preparation of electrolytic ceramic films on stainless steel conversion coatings	L. Aries
559-563	Reduction of 1-nitroso-2-naphthol at a Ti/ceramic TiO₂ cathode in different media	D. Vasudevan and P. N. Anantharaman
564-568	Voltammetric behaviour of the copper(II)—thiourea system in sulphuric acid medium at platinum and glassy carbon electrodes	P. Cofré and A. Bustos
569-574	Surface morphology and crystal orientation of electrodeposited tin from acid stannous sulphate solutions containing various additives	Y. Nakamura, N. Kaneko and H. Nezu
575-580	Effect of carbon dioxide on the performance of Ni/PTFE and Ag/PTFE electrodes in an alkaline fuel cell	M. A. Al-Saleh, S. Gültekin, A. S. Al-Zakri and H. Celiker
581-583	Electrogeneration of acrylamide-bisacrylamide gel films on platinum	T. F. Otero, F. García, C. Danilowicz and E. Calvo
584-586	Use of Zr/ZrO₂ as a counter electrode for the minimization of loss reactions in single compartment electrolysis cells	Y. Malherbe and Ch. Comninellis
587-592	Calendar
592	Books received

Volume 24, Number 7 / July 1994

591	Editorial	A. A. Wragg
593-601	Fluctuation analysis in electrochemical engineering processes with two phase flows	C. Gabrielli and F. Huet
602-606	Experimental studies of momentum transfer in a gas-liquid system in the vicinity of an agitated vessel wall	J. Karcz
607-611	Investigation of the wall region of gas-liquid flow using an electrodiffusional technique	O. N. Kashinsky
612-618	Liquid-wall shear stress in stratified liquid/gas flow	J. M. Rosant
619-625	Experimental comparison of electrochemical and dot-paint methods for the study of decaying swirling flow	H. Aouabed, P. Legentilhomme, C. Nouar and J. Legrand
626-631	Electrodiffusion diagnostics of wall shear stresses in impinging jets	S. V. Alekseenko and D. M. Markovich
632-638	Study of mass transfer in viscoelastic liquids by segmented electrodiffusion velocity probes	V. Sobolík, S. Martemyanov and G. Cognet
639-646	An experimental study of the frequency response of electrochemical sensors in nonhomogeneous flow in packed beds	S. Rode, M. A. Latifi, A. Storck and N. Midoux
647-651	Electrochemical observation of instabilities of the Belousov-Zhabotinskii reaction in CSTR	K. Kataoka, N. Ohmura, S. Watanabe, K. Sumida and S. Deki
652-657	A photophysical technique for the measurement of local oxygen concentration near an electrode surface	V. Lescuras, I. Zouari, G. Valentin, F. Lapicque and J. C. André
658-665	Local enhancement of liquid-to-wall mass transfer by a single gas bubble	A. Ben Youssef, U. Haebel and Ph. Javet
666-669	Determination of local hydrodynamic parameters in bubble columns by the electrodiffusion method with oxygen as depolarizer	S. Pannek, J. Pauli and U. Onken
670-675	Study of pulsing flow in a trickle bed using the electrodiffusion technique	N. A. Tsochatzidis and A. J. Karabelas
676-684	A three-segment electrodiffusion probe in axisymmetric flow with stagnation and separation	F. Baleras, C. Deslouis, B. Tribollet and V. Sobolik
685-693	Electrochemical study of mass transfer in decaying annular swirl flow
694-696	Direction-specific characteristics of a three-component electrodiffusional velocity probe	O. N. Kashinsky, V. V. Randin, L. S. Timkin and O. N. Yerycheva
697-701	Calendar

Volume 24, Number 8 / August 1994

ii	Erratum
703-712	Mathematical reactor modelling for coupled chemical and electrochemical processes: the ECE system	K. Scott and A. N. Haines
713-718	Mechanism of the reverse dissolution of zinc in the presence of nickel	C. Cachet, R. Wiart, I. Ivanov, Y. Stefanov and S. Rashkov
719-724	Coplanar interdigitated band electrodes for electrosynthesis	C. Belmont and H. H. Girault
725-729	Preparative scale synthesis ofO-glycosides and of a disaccharide by electrochemical oxidation of phenylS-glycosides	C. Amatore, A. Jutand, G. Meyer, P. Bourhis and F. Machetto, et al.
730-736	Effects of metallic and D2EHPA impurities on nickel electrowinning from aqueous sulphate baths	E. Küzeci, R. Kammel and S. K. Gogia
737-744	Turbulent mass transfer in small radius ratio annuli	J. Legrand and S. A. Martemyanov
745-750	An electrochemical hydrocyclone cell for the treatment of dilute solutions: approximate plug-flow model for electrodeposition kinetics	N. Dhamo
751-757	Oxygen trickle-bed electrode as a cathode for chlor-alkali electrolysis	O. Špalek
758-766	Cathodic behaviour of antimony (III) species in chloride solutions	H. K. Lin, X. Wu and P. D. Rao
767-771	Sparking at cathode tools during electrochemical machining in flow-through cells	I. Roušar and T. Riedel
772-778	Impedance spectroscopic study of aluminium and Al-alloys in acid solution: inhibitory action of nitrogen containing compounds	M. Metikoš-Huković, R. Babić, Z. Grubač and S. Brinć
779-784	Non-toxic organic zinc corrosion inhibitors in hydrochloric acid	E. Stupnišek-Lisac, S. Podbršček and T. Sorić
785-790	Decolourization of dye-containing solutions by electrocoagulation	J. -S. Do and M. -L. Chen
791-797	Electrolysis of MgCl₂ with a top inserted anode and an Mg-Pb cathode	M. Güden and İ. Karakaya
798-802	Measurement of anode potentials at high current densities in NaNO₃ and NaClO₃ media by the current interruption method for metals used in aviation technology	J. Hiveš and I. Roušar
803-807	Corrosion and inhibition of aged 347 grade stainless steel boiler tubes	D. P. Schweinsberg, B. Sun and V. Otieno-Alego
808-813	Electrochemical characteristics of hydrogen storage alloys modified by electroless nickel coatings	K. Naito, T. Matsunami, K. Okuno, M. Matsuoka and C. Iwakura
814-818	Behaviour of Al-Sn alloy on the negative side of the open-circuit potential	M. Kliškić, J. Radošević and Lj. Aljinović
819-820	Repair of microelectronic circuits using Joule heating induced local electrodeposition	H. Kawamoto
821-825	Calendar

Volume 24, Number 9 / September 1994

ii	Erratum
827-834	Specificity of anodic processes in cyclic voltammetry to the type of carbon used in electrolysis of cryolite-alumina melts	S. S. Djokić, B. E. Conway and T. F. Belliveau
835-857	Integrity of ultramicro-stimulation electrodes determined from electrochemical measurements	U. M. Twardoch
858-862	Further studies of a zinc-air cell employing a packed bed anode Part III: Improvements in cell design	J. C. Salas-Morales and J. W. Evans
863-869	Kinetic study of electrochemical reactions at catalyst-recast ionomer interfaces from thin active layer modelling	F. Gloaguen, F. Andolfatto, R. Durand and P. Ozil
870-877	Modification of carbon electrodes by a nitrate-based treatment	H. Groult, D. Devilliers, M. Vogler and M. Chemla
878-882	Voltammetry and anodic stability of a hydrous oxide film on a nickel electrode in alkaline solution	M. Vuković
883-887	Pressure dependence of limiting current density of sparking during electrochemical drilling	B. Sajdl and I. Roušar
888-893	Chromium coating on partially tin precoated steel sheet	J. Morita and M. Yoshida
894-899	Anodic film on lead-arsenic alloy in sulphuric acid medium	S. J. Xia and W. F. Zhou
900-905	Effect of additives on anomalous deposition in zinc-cobalt alloy electrogalvanizing	H. M. Wang and T. J. O'Keefe
906-910	Nucleation and growth of copper on glassy carbon and steel	L. Bonou, M. Eyraud and J. Crousier
911-916	Studies on the influence of chloride ion and pH on the electrochemical behaviour of aluminium alloys 8090 and 2014	R. Ambat and E. S. Dwarakadasa
917-922	Impedance measurements on some doped MnO2 electrodes in H2SO4 electrolyte	B. D. Desai, F. S. Lobo and V. N. Kamat Dalal
923-929	Characteristics of titanium deposits by electrolysis in molten chloride-fluoride mixture	D. Wei, M. Okido and T. Oki
930-935	Production of d-arabinose in a pilot plant fluidized bed electrochemical reactor	V. Jiřičný and V. Staněk
936-942	In situ oxidative degradation of formaldehyde with hydrogen peroxide electrogenerated on the modified graphites	J. S. Do and C. P. Chen
943-947	Inhibition studies in sweet corrosion systems by a quaternary ammonium compound	R. Zvauya and J. L. Dawson
948-952	Calendar

Volume 24, Number 10 / October 1994

953-964	Factors affecting the electrochemical behaviour of copper anodes under simulated electrorefining conditions	E. A. Kucharska-Giziewicz and D. J. Mackinnon
965-969	Electrosynthesis of toluidines using thermally coated Ti/TiO₂ electrodes	C. Ravichandran, M. Noel and P. N. Anantharaman
970-976	Laboratory techniques for evaluating solid oxide fuel cells	J. Herle and K. Ravindranathan Thampi
977-980	Potentiodynamic estimation of the degradation of 347 grade SS superheater tubes Part III: Use of a portable cell for in situ evaluation	B. Sun, H. Flitt and D. P. Schweinsberg
981-988	Simultaneous underpotential deposition of lead and thallium on polycrystalline silver-III	S. Bharathi, V. Yegnaraman and G. Prabhakara Rao
989-992	5,4′-dimethyl-2-methoxydiphenylether: a new product from the anodic oxidation of 4-methylanisole	J. Hlavatý
993-1000	Codeposition of SiC powders with nickel in a Watts bath	S. H. Yeh and C. C. Wan
1001-1008	A study of the delay effect in SOCl₂ batteries	M. Kovač, M. Gaberšček and S. Pejovnik
1009-1012	Cathodic process in copper-tin deposition from sulphate solutions	O. Galdikiené and Z. Mockus
1013-1018	Influence of the composition of zinc-ethyl silicate paints on electrochemical properties	R. Romagnoli, V. F. Vetere and R. A. Armas
1019-1027	Electrocatalytic oxidation of methanol and C1 molecules on highly dispersed electrodes Part II: Platinum-ruthenium in polyaniline	H. Laborde, J-M. Léger and C. Lamy
1028-1036	Reduction of chromate in dilute solution using hydrogen in a GBC-cell	E. C. W. Wijnbelt and L. J. J. Janssen
1037-1043	A composite electrode for studying powdered electroactive materials: preparation and performance	M. Keddam, S. Senyarich, H. Takenouti and P. Bernard
1044-1051	Effect of chromate ion on zinc electrowinning from acid sulphate electrolyte	J.-C. Lin and S.-L. Tsai
1052-1058	Electrochemical treatment of bisphenol-A containing wastewaters	A. Boscolo Boscoletto, F. Gottardi, L. Milan, P. Pannocchia and V. Tartari, et al.
1059-1065	Electrical properties of polyaniline films formed in acid with and without Cs⁺ ions in the electrolyte	S. R. Maggio, C. L. F. Oliveira, M. J. Aguirre and J. H. Zagal
1066-1072	Ionic conductivity and lithium electrode stability in Hydrin: LiBF₄ elastomers	N. Munichandraiah, L. G. Scanlon, R. A. Marsh, B. Kumar and A. K. Sircar
1073-1075	Calendar

Volume 24, Number 11 / November 1994

1077-1091	Electrochemistry and the environment	K. Rajeshwar, J. G. Ibanez and G. M. Swain
1092-1101	Electrochemical polishing of hydrogen sulfide from coal synthesis gas	S. R. Alexander and J. Winnick
1102-1108	Fundamental study of the anodic and cathodic reactions during the electrolysis of a lithium carbonate-lithium chloride melt using a carbon anode	W. H. Kruesi and D. J. Fray
1109-1115	Effect of operating conditions on anode passivation in the electrorefining of copper	X. Ling, Z. H. Gu and T. Z. Fahidy
1116-1123	Optimal time-varying cell-voltage control of a parallel-plate reactor	R. Bakshi and P. S. Fedkiw
1124-1132	Calculation of bypass currents in molten salt bipolar cells	I. Rousar and J. Thonstad
1133-1138	Photoelectrochemical properties of bismuth-doped titanium oxide electrodes	S. -Y. Park, B. -W. Cho, K. -S. Yun and E. -C. Lee
1139-1145	Corrosion inhibition of amorphous FeBSiC alloy in 1 m HCl by 3-amino-1,2,4-triazole	S. Kertit, F. Chaouket, A. Srhiri and M. Keddam
1146-1152	Electrochemical production of lead chromate and sodium hydroxide in a two-compartment cell	R. Gana, M. Figueroa, V. Arancibia and J. Solís
1153-1157	Electrochemical cell design for in situ measurements in condenser tubes	M. V. Vazquez, S. N. Simison and S. R. Sanchez
1158-1163	Inhibition of aluminium corrosion in chloride media: an impedance study	C. M. A. Brett, I. A. R. Gomes and J. P. S. Martins
1164-1169	Electrocatalytic behaviour of a poly(N-methylaniline) filmed electrode to hydroquinone	J. Yano, M. Kokura and K. Ogura
1170-1175	Numerical simulation of two-dimensional fluid flow in electrochemical drillinz	L. W. Hourng and C. S. Chang
1176-1181	Preparation and electrochemical characteristics of a new Li-Mn-V-O system formed from heat-treatment of a MnO₂, NH₄VO₃ and LiNO₃ mixture	N. Kumagai, T. Tamachi, T. Bingda and K. Tanno
1182-1187	Studies on the anodic decomposition products of sulfamate	H. Zhang and S. -M. Park
1188-1190	Electrochemical synthesis of erythrosin from fluorescein	D. Vasudevan and P. N. Anantharaman
1191-1193	Anodic leaching of tungsten alloy swarf: a statistical approach	G. N. Srinivasan, A. Varadharaj and J. A. M. Abdul Kader
1194-1195	Book reviews	B. R. Eggins and Frank Walsh
1196-1199	Calendar
1199	Books recently published

Volume 24, Number 12 / December 1994

1201-1205	Detection of damaged membranes in alkali chloride electrolysers	D. Bergner and M. Hartmann
1206-1212	Electrolytic process optimization by simultaneous-modular flowsheeting	R. D. Roche, M. A. Stadtherr and R. C. Alkire
1213-1221	Studies of tetra-(bipyridilium) salts as possible polyelectrochromic materials	D. R. Rosseinsky and P. M. S. Monk
1222-1227	Electrical conductivity and oxygen semipermeability of terbia and yttria stabilized zirconia	G. Z. Cao
1228-1234	Dynamic behaviour of an electrolyser with a two phase solid-liquid electrolyte Part I: Spectral analysis of potential fluctuations	C. Gabrielli, F. Huet, R. Wiart and J. Zoppas-Ferreira
1235-1243	Dynamic behaviour of an electrolyser with a two phase solid-liquid electrolyte Part II: Investigation of elementary phenomena and electrode modelling	C. Gabrielli, F. Huet, R. Wiart and J. Zoppas-Ferreira
1244-1248	Behaviour of sodium silicate and sodium phosphate (tribasic) as corrosion inhibitors for iron	R. D. Armstrong, L. Peggs and A. Walsh
1249-1255	Properties of Zn-Ni alloy deposits from ammonium baths	G. Barceló, J. García, M. Sarret, C. Müller and J. Pregonas
1256-1261	Comparative evaluation of electroreduction of nitrobenzene and m-dinitrobenzene on Ti/TiO₂ electrodes in H₂SO₄	C. Ravichandran, M. Noel and P. N. Anantharaman
1262-1266	Long service life IrO₂/Ta₂O₅ electrodes for electroflotation	R. Mráz and J. Krýsa
1267-1275	Electrocatalytic properties of doped nickel boride based electrodes for the hydrogen evolution reaction	J. J. Borodzínski and A. Lasia
1276-1278	Effects of diffusion-limited mass transfer on metal underpotential deposition voltammograms	R. Gao and D. Roy
1279-1280	Surface finishing CD	Yingyang Zhu
1280-1281	Calendar

Volume 25, Number 1 / January 1995

1-5	Applications of magnetoelectrolysis	R. A. Tacken and L. J. J. Janssen
6-14	Electrolyte wetting effects in the comparative polarization behaviour of the hydrogen evolution reaction at Ni-Mo-Cd electrodes in KF · 2HF and KOH · 2H₂O melts	L. Gao, S. Y. Qian and B. E. Conway
15-22	Electrochemical study of mass transfer in decaying annular swirl flow Part II: Correlation of mass transfer data	S. Yapici, M. A. Patrick and A. A. Wragg
23-28	Anodic oxidation of phenol in the presence of NaCl for wastewater treatment	Ch. Comninellis and A. Nerini
29-33	Conductive carbon-polypropylene composite electrodes for vanadium redox battery	V. Haddadi-Asl, M. Kazacos and M. Skyllas-Kazacos
34-40	Electrorefining of aluminium scrap from chloride melts	V. Schwarz and H. Wendt
41-47	Diffusion through a multilayered phase in electrochemical systems: an approach by numerical inversion of the Laplace transform	Y. Ogata, T. Sakka and M. Iwasaki
48-53	Electrochemical formation of Pd-Li alloys in LiCl-KCl eutectic melts	T. Nohira, K. Amezawa and Y. Ito
54-60	Theoretical validation of the physical scale modelling of the electrical potential characteristics of marine impressed current cathodic protection	R. W. Ditchfield, J. N. McGrath and D. J. Tighe-Ford
61-67	In situ comparison of diffusivities for hydrogen and deuterium in palladium	C. J. Lihn, C. C. Wan and T. P. Perng
68-72	Impedance spectroscopy study with H-doped ammonium uranylphosphate self supported membranes	J. Benavente, J. R. Ramos-Barrado, M. Martinez and S. Bruque
73-79	Electrocatalytic oxidation of benzyl alcohol in alkaline medium on RuO₂-coated titanium electrode	S. -M. Lin and T. -C. Wen
80-87	Effect of silicate adsorption on the double layer capacitance and exchange current density of the Pb/PbSO₄ electrode reaction	M. P. Vinod and K. Vijayamohanan
88-92	Calendar
93	News item

Volume 25, Number 2 / February 1995

95-105	Generalized expressions for estimating the current efficiency of ion-exchange membrane and diaphragm chlor-alkali cells	C. -P. Chen, B. V. Tilak and J. W. Quigley
106-113	Comparison of the behaviour of glassy carbon and some metals for use as nonconsumable anodes in alumina-cryolite melts	S. S. Djokić and B. E. Conway
114-121	Bipolar Al/0₂ battery with planar electrodes in alkaline and acidic electrolytes	M. Rota, Ch. Comninellis, S. Moller, F. Holzer and O. Haas
122-125	An oxygen electrode for air-consuming proton exchange membrane fuel cells for transportation applications	P. G. Dirven, W. J. Engelen and C. J-M. Poorten
126-136	Mechanism of anodic oxidation of chlorate to perchlorate on platinum electrodes	L. J. J. Janssen and P. D. L. Heyden
137-141	Inhibiting effects of benzotriazole on the corrosion of α-Al-bronze in saline water	E. A. Ashour, S. M. Sayed and B. G. Ateya
142-148	Sol-gel TiO₂-SiO₂ films as protective coatings against corrosion of 316L stainless steel in H₂SO₄ solutions	M. Atik, P. Lima Neto, M. A. Aegerter and L. A. Avaca
149-154	Mass transfer study of the electropolishing of vertical cylinders with active ends under natural convection conditions	G. H. Sedahmed and I. Nirdosh
155-165	Cathodic reduction of hypochlorite during reduction of dilute sodium chloride solution	M. Rudolf, I. Rousar and J. Krysa
166-172	Zinc oxoacidity properties in molten LiCl-KCl eutectic at 450° C	H. Rouault-Rogez, J. Bouteillon and J. -C. Poignet
173-175	Electrolytic partial fluorination of organic compounds. Part X1 Regioselective anodic monofluorination of phenylsulfenylacetate using a flow-cell system	A. Konno and T. Fuchigami
176-178	Reduction of maleic acid at a Ti/ceramic TiO₂ cathode	D. Vasudevan
179	Comments on the paper “Influence of the heat treatment in the electrochemical corrosion of Al-Zn-Mg alloys” by P. L. Cabot et al.	L. Tomcsányi
180-181	Reply to the comments of L. Tomcsanyi on the paper “influence of the heat treatment in the electrochemical corrosion of Al-Zn-Mg alloys”	P. L. Cabot
182-186	Calendar

Volume 25, Number 3 / March 1995

187-202	Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings	F. Mansfeld
203-207	Electrochemical removal of both NO and CH₄ under lean-burn conditions	T. Hibino
208-211	A novel miniature zirconia gas sensor with pseudo-reference Part III: Simple implementation for the determination of air-to-fuel ratio	M. Benammar and W. C. Maskell
212-218	Surface treatment for mitigation of hydrogen absorption and penetration into AISI 4340 steel and Inconel 718 alloy	G. Zheng, B. N. Popov and R. E. White
219-226	Physical and electrochemical characteristics of nickel hydroxide as a positive material for rechargeable alkaline batteries	K. Watanabe, T. Kikuoka and N. Kumagai
227-232	Preparation of solid polymer electrolyte composites: investigation of the ion-exchange process	P. Millet, F. Andolfatto and R. Durand
233-239	Preparation of solid polymer electrolyte composites: investigation of the precipitation process	P. Millet, F. Andolfatto and R. Durand
240-246	Anode-support system for the direct electrorefining of cement copper Part I: Process conditions using horizontal rotary cathodes	R. Gana, M. Figueroa, L. Kattan, J. M. Sánchez and M. A. Esteso
247-251	Semiconducting properties of TiO₂ films thermally formed at 400° C	O. R. Cámara, C. P. Pauli, M. E. Vaschetto, B. Retamal and M. J. Aquirre, et al.
252-258	Electrochemical behaviour of Al-In alloys in chloride solutions	S. B. Saidman, S. G. Garcia and J. B. Bessone
259-266	In situ FTIR characterization of the electrooxidation of glassy carbon electrodes	Y. Yang and Z. G. Lin
267-272	Enhancement of mass transfer at a spherical electrode in pulsating flow	J. L. Guiñón, V. Pérez-Herranz, J. García-Antón and G. Lacoste
273-278	Electrochemical mass transfer to regular packings in a bubble column	A. I. Tasat, O. N. Cavatorta and U. Böhm
279-283	Electrochemical oxidation of isobutanol to isobutyric acid in a flow cell	A. S. Vaze, S. B. Sawant and V. G. Pangarkar
284-290	Electropolymerization of poly(2-vinylpyridine) films on zinc	A. Bruyne, J. -L. Delplancke and R. Winand
291	Physical properties of aqueous solutions containing NaClO₃ and/or NaClO₄	L. J. J. Janssen
294-298	Calendar

Volume 25, Number 4 / April 1995

299-306	Characterization of a flow-by RVC electrode reactor for the removal of heavy metals from dilute solutions	E. J. Podlaha and J. M. Fenton
307-314	Removal of formaldehyde from aqueous solutions via oxygen reduction using a reticulated vitreous carbon cathode cell	C. Ponce Leon and D. Pletcher
315-325	Discharge behaviour of tubular lead dioxide electrodes Part III: Two-dimensional current density distribution	J. Landfors, D. Simonsson and R. E. White
326-333	Calculation of the impedance of noncylindrical pores Part I: Introduction of a matrix calculation method	K. Eloot, F. Debuyck, M. Moors and A. P. Peteghem
334-339	Calculation of the impedance of noncylindrical pores Part II: Experimental verification on pores drilled into stainless steel	K. Eloot, F. Debuyck, M. Moors and A. P. Peteghem
340-346	Copper removal from aerated solution containing various metal ions using an undivided rotating cylinder electrode reactor	N. Massé, J. St-Pierre and M. Bergeron
347-352	Improved corrosion resistance of pulse plated nickel through crystallisation control	P. T. Tang, T. Watanabet, J. E. T. Andersen and G. Bech-Nielsen
353-357	Electrochemical sulphur dioxide oxidation with platinum-aluminum electrocatalysts	J. Lee and S. H. Langer
358-363	Influence of temperature on electroreduction of anodically formed passive films on lead electrodes in H₂SO₄ solutions Part I: Electroreduction of PbS0₄ layers	F. E. Varela, L. M. Gassa and J. R. Vilche
364-370	Influence of temperature on electroreduction of anodically formed passive films on lead electrodes in H₂SO₄ Solutions Part II: Electroreduction of PbO layers	F. E. Varela, L. M. Gassa and J. R. Vilche
371-375	Evaluation of the inhibition efficiency of acetylenic halo-derivatives by electrochemical methods and solution analysis	A. Frignani, C. Monticelli, M. Tassinari and G. Trabanelli
376-383	Electrodeposition and characterization of amorphous Fe-Ni-Cr-based alloys	J. -C. Kang, S. B. Lalvani and C. A. Melendres
384-403	Mass transfer and electrocrystallization analyses of nanocrystalline nickel production by pulse plating	R. T. C. Choo, J. M. Toguri, A. M. El-Sherik and U. Erb
404-407	Quantitative determination of dispersed platinum in carbon by cyclic voltammetry	A. Essalik, K. Amouzegar and O. Savadogo
408-411	Complexing power of alkanesulfonate ions: the lead-methanesulfonate system	M. D. Capelato, J. A. Nóbrega and E. F. A. Neves
412-417	Potentiostatic study of the passivation of aluminium alloys in aqueous electrolyte media	M. Elboujdaini, E. Ghali, R. G. Barradas and M. Girgis
418-423	News

Volume 25, Number 5 / May 1995

425-432	The manganese dioxide electrode Part XII: Gibbs free energy of H insertion compounds and a planar model	F. L. Tye and S. W. Tye
433-440	Degradation mechanisms of nickel oxide electrodes in zinc/nickel oxide cells with low-zinc-solubility electrolytes	R. F. Plivelich, F. R. McLarnon and E. J. Cairns
441-449	Study of Taylor-Couette flow using a three-segment electrodiffusion probe	V. Sobolík, B. Benabes and G. Cognet
450-455	Mass transport to reticulated vitreous carbon rotating cylinder electrodes	A. H. Nahlé, G. W. Reade and F. C. Walsh
456-461	Development of a rotating ring-disc electrode for high temperature studies in cryolite-based melts	R. S. Stojanovic, J. F. Kubacki, R. Dorin and E. J. Frazer
462-471	Oxygen evolution on electrochemically generated cobalt spinel coating	E. Potvin and L. Brossard
472-478	Electrolysis of weak black liquor Part II: Effect of process parameters on the energy efficiency of the electrolytic cell	J.-N. Cloutier, M. K. Azarniouch and D. Callender
479-482	Pilot scale process for hydrodimerization of dimethyl maleate	E. A. Casanova, M. C. Dutton, D. J. Kalota and J. H. Wagenknecht
483-489	In situ degradation of formaldehyde with electrogenerated hypochlorite ion	J.-S. Do and W.-C. Yeh
490-494	Electrochemical dissolution of metals of the platinum group by alternating current	A. D. Styrkas and D. Styrkas
495-500	Studies on the influence of iodide ions on the synergistic inhibition of the corrosion of mild steel in an acidic solution	S. Syed Azim, S. Muralidharan and S. Venkatakrishna Iyer
501-507	Effect of sulphate anions on tunnel etching of aluminium	J. Flis and L. Kowalczyk
508-511	Bioelectropolymerization of phenol	A. Courteix, A. Bergel and M. Comtat
512-517	Calendar

Volume 25, Number 6 / June 1995

519-527	Electrochemical codeposition of inert particles in a metallic matrix	A. Hovestad and L. J. J. Janssen
528-532	Methanol electrooxidation on carbon-supported Pt-WO_3−x electrodes in sulphuric acid electrolyte	A. K. Shukla, M. K. Ravikumar, S. Aricò, G. Candiano and V. Antonucci, et al.
533-542	Heat generation during pulse operation of prototype aluminium electrolytic capacitors	R. S. Alwitt and S. G. Parler
543-555	Mass transport effects on the electrodeposition of iron-nickel alloys at the presence of additives	K. -M. Yin, J. -H. Wei, J. -R. Fu, B. N. Popov and S. N. Popova, et al.
556-564	Influence of Ge⁴⁺ and Pb²⁺ ions on the kinetics of zinc electrodeposition in acidic sulphate electrolyte	R. Ichino, C. Cachet and R. Wiart
565-573	Modelling of time-dependent performance criteria in a three-dimensional cell system during batch recirculation copper recovery	V. D. Stankovic and A. A. Wragg
574-583	Effect of thiourea, benzotriazole and 4,5-dithiaoctane-1,8-disulphonic acid on the kinetics of copper deposition from dilute acid sulphate solutions	E. E. Farndon, F. C. Walsh and S. A. Campbell
584-591	Effect of surface modification using various acids on electrodeposition of lithium	S. Shiraishi, K. Kanamura and Z. Takehara
592-602	Hydrogen evolution reaction on Ni-Al-Mo and Ni-Al electrodes prepared by low pressure plasma spraying	D. Miousse, A. Lasia and V. Borck
603-608	Effect of surface active agents on the initial formation of electrodeposited copper layers	R. Rashkov and C. Nanev
609-612	News

Volume 25, Number 7 / July 1995

613-627	Processes for the production of mixtures of caustic soda and hydrogen peroxide via the reduction of oxygen	P. C. Foller and R. T. Bombard
628-641	Real area and electrocatalysis factors in hydrogen evolution kinetics at electrodeposited Ni-Mo and Ni-Mo-Cd composites: effect of Cd content and nature of substrate	R. Šimpraga, L. Bai and B. E. Conway
642-650	Surface pH measurements during nickel electrodeposition	J. Ji, W. C. Cooper, D. B. Dreisinger and E. Peters
651-658	Synthesis of fluorocyclohexadienes by the electrochemical fluorination of p-difluorobenzenes on a preparative scale	K. Momota, T. Yonezawa, Y. Hayakawa, K. Kato and M. Morita, et al.
659-666	A kinetic and electrochemical study of the zincate immersion process for aluminium	S. G. Robertson, I. M. Ritchie and D. M. Druskovich
667-670	Electrodeposition of Ni-Mo alloys with pulse reverse potentials	E. Chassaing, M. P. Roumegas and M. F. Trichet
671-676	Role of free F⁻ anions in the electrorefining of titanium in molten alkali halide mixtures	N. Ene and S. Zuca
677-681	Natural convection mass transfer inside cylindrical cavities of different orientation	G. H. Sedahmed, A. M. Ahmed, M. E. El-Rafey, A. Y. Hosney and E. A. Ayob
682-689	Role of minor alloying elements on the performance of lead—acid battery grids Part I: Corrosion of Pb-Se alloys	A. G. Gad Allah, H. A. Abd El-Rahman and M. Abd El-Galil
690-698	An electrochemical technique for the reduction of aromatic nitrocompounds in H₂SO₄ medium on thermally coated Ti/TiO₂ electrodes	M. Noel, C. Ravichandran and P. N. Anantharaman
699-701	Photoemission of electrons into electrolyte from cadmium oxide layers formed by anodic oxidation of undeformed and plastically deformed cadmium plates	R. Dragon, S. Wacke and T. Górecki
702-705	News

Volume 25, Number 8 / August 1995

707-715	Effects of electrochemically incorporated bismuth on the discharge and recharge of electrodeposited manganese dioxide films in 9m aqueous KOH	C. G. Castledine and B. E. Conway
716-728	Effect of state of charge on impedance spectrum of sealed cells Part I: Ni-Cd cells	V. V. Viswanathan, A. J. Salkind, J. J. Kelley and J. B. Ockerman
729-739	Effect of state of charge on impedance spectrum of sealed cells Part II: Lead acid batteries	V. V. Viswanathan, A. J. Salkind, J. J. Kelley and J. B. Ockerman
740-754	Kinetics and mechanism of the oxygen electroreduction reaction on faceted platinum electrodes in trifluoromethanesulfonic acid solutions	C. F. Zinola, W. E. Triaca and A. J. Arvia
755-763	An efficient method for solving the model equations of a two dimensional packed bed electrode	Y. P. Sun, W. L. Xu and . Scott
764-769	Improved current efficiency equation for the electrodeposition of copper	H. Vogt
770-775	Influence of pH on nickel electrodeposition at low nickel(II) concentrations	W. G. Proud, E. Gomez, E. Sarret, E. Valles and C. Müller
776-780	A new method for the measurement of the diffusivity of carbon in alpha-iron using an electrochemical cell	S. Rajendran Pillai
781-791	Effect of the addition of Cr and Nb on the microstructure and electrochemical corrosion of heat-treatable Al-Zn-Mg alloys	P. L. Cabot, J. A. Garrido, E. Pérez, A. H. Moreira and P. T. A. Sumodjo, et al.
792-796	Electrochemical oxidation of thiocyanate in a two-phase electrolyte	P. Krishnan and V. G. Gurjar
797-802	Lithiation study of molybdenum oxide thin films: application to an electrochromic system	K. Boufker
803-804	Book reviews	D. W. M. Arrigan and Guy Denuault
805-808	Calendar

Volume 25, Number 9 / September 1995

809-816	Cathodic process and cyclic redox reactions in aluminium electrolysis cells	Å. Sterten and P. A. Solli
809-816	Cathodic process and cyclic redox reactions in aluminium electrolysis cells	Å. Sterten and P. A. Solli
817-822	Performance characteristics of a new type of lead dioxide-coated titanium anode	M. Ueda, A. Watanabe, T. Kameyama, Y. Matsumoto and M. Sekimoto, et al.
817-822	Performance characteristics of a new type of lead dioxide-coated titanium anode	M. Ueda, A. Watanabe, T. Kameyama, Y. Matsumoto and M. Sekimoto, et al.
823-832	An electrochemical study of reduced ilmenite carbon paste electrodes	Y. Marinovich, S. Bailey, J. Avraamides and S. Jayasekera
823-832	An electrochemical study of reduced ilmenite carbon paste electrodes	Y. Marinovich, S. Bailey, J. Avraamides and S. Jayasekera
833-840	Kinetic aspects of self-discharge of nickel-hydrogen batteries and methods for its prevention	A. Visintin, A. Ananit, S. Srinivasan, A. J. Appleby and H.S. Lim
833-840	Kinetic aspects of self-discharge of nickel-hydrogen batteries and methods for its prevention	A. Visintin, A. Ananit, S. Srinivasan, A. J. Appleby and H. S. Lim
841-845	Cathodic reduction and infrared reflectance spectroscopy of basic copper(II) salts on copper substrate	J. Y. Malvault, J. Lopitaux, D. Delahaye and M. Lenglet
841-845	Cathodic reduction and infrared reflectance spectroscopy of basic copper(II) salts on copper substrate	J. Y. Malvault, J. Lopitaux, D. Delahaye and M. Lenglet
846-851	Electrochemical mediators for total oxidation of chlorinated hydrocarbons: formation kinetics of Ag(II), Co(III), and Ce(IV)	J. Bringmann, K. Ebert, U. Galla and H. Schmieder
846-851	Electrochemical mediators for total oxidation of chlorinated hydrocarbons: formation kinetics of Ag(II), Co(III), and Ce(IV)	J. Bringmann, K. Ebert, U. Galla and H. Schmieder
852-856	A voltammetric investigation of the oxidation of pyrite in nitric acid solutions: relation to treatment of refractory gold ores	J. R. Flatt and R. Woods
852-856	A voltammetric investigation of the oxidation of pyrite in nitric acid solutions: relation to treatment of refractory gold ores	J. R. Flatt and R. Woods
857-863	Influence of zeolite on electrochemical and physicochemical properties of polyethylene oxide solid electrolyte	N. Munichandraiah, L. G. Scanlon, R. A. Marsh, B. Kumar and A. K. Sircar
857-863	Influence of zeolite on electrochemical and physicochemical properties of polyethylene oxide solid electrolyte	N. Munichandraiah, L. G. Scanlon, R. A. Marsh, B. Kumar and A. K. Sircar
864-868	Pressure drop behaviour in a three-dimensional packed bed cell during copper deposition and hydrogen evolution	V. D. Stanković, G. Lazarević and A. A. Wragg
864-868	Pressure drop behaviour in a three-dimensional packed bed cell during copper deposition and hydrogen evolution	V. D. Stanković, G. Lazarević and A. A. Wragg
869-873	Effect on discharge of the heat treatment of graphite fluoride under a hydrogen atmosphere	N. Kumagai, M. Kawamura, H. Hirohata, K. Tanno and Y. Chong, et al.
869-873	Effect on discharge of the heat treatment of graphite fluoride under a hydrogen atmosphere	N. Kumagai, M. Kawamura, H. Hirohata, K. Tanno and Y. Chong, et al.
874-880	Electrode stabilities of copper-containing misch metal-nickel-based hydride forming alloys	T. Weizhong, G. Yingxin and Z. Haoyu
874-880	Electrode stabilities of copper-containing misch metal-nickel-based hydride forming alloys	T. Weizhong, G. Yingxin and Z. Haoyu
881-885	Variation of the dielectric constant of anodic oxide films on titanium with oxygen evolution	M. A. Abdel Rahim
881-885	Variation of the dielectric constant of anodic oxide films on titanium with oxygen evolution	M. A. Abdel Rahim
886	Electrochemical behaviour of perrhenate ions in molten alkali fluorides	A. M. Affoune, J. Bouteillon and J. C. Poignet
886	Electrochemical behaviour of perrhenate ions in molten alkali fluorides	A. M. Affoune, J. Bouteillon and J. C. Poignet
890	Observations of inclusions of polymeric additives in copper electrodeposits by transmission electron microscopy	G. A. Hope, G. M. Brown, D. P. Schweinsberg, K. Shimizu and K. Kobayashi
890-894	Observations of inclusions of polymeric additives in copper electrodeposits by transmission electron microscopy	G. A. Hope, G. M. Brown, D. P. Schweinsberg, K. Shimizu and K. Kobayashi
895-898	Calendar
895-898	Calendar

Volume 25, Number 10 / October 1995

899-912	Electrochemical studies of methane activation	M. Stoukides
913-922	Formation and reduction of hydrous oxide films on platinum in aqueous solution at 273 K	L. D. Burke and D. T. Buckley
923-932	Hydrogen evolution reaction on electrocatalytic materials highly dispersed on carbon powder	J. Fournier, H. Ménard and L. Brossard
933-939	Jet electrochemical etching of nickel in a sodium chloride medium assisted by a pulsed laser beam	V. Lescuras, J. C. André, F. Lapicque and I. Zouari
940-946	Kinetics and mechanism of the magnesium electrode reaction in molten magnesium chloride	A. Kisza, J. Kaźmierczak, B. Børresen, G. M. Haarberg and R. Tunold
947-952	Reduction of metallic surface oxides via an electrochemically-generated redox species	D. M. Tench, D. P. Anderson, P. Jambazian, P. Kim and L. F. Warren, et al.
953-961	Effect of cathodic reduction on catalytic activity of amorphous alloy electrodes for electrooxidation of sulfite	T. Mori, A. Kawashima, E. Akiyama, H. Habazaki and K. Asami, et al.
962-966	The fractal dimension of corroded aluminium surfaces	P. R. Roberge and K. R. Trethewey
967-972	Electrochemical investigations of the Ce(m)/Ce(iv) couple related to a Ce(iv)-assisted process for SO₂/NO_x abatement	J. M. Nzikou, M. Aurousseau and F. Lapicque
973-977	Electrochemical removal of dissolved oxygen from water	K. Vuorilehto, A. Tamminen and S. Ylasaari
978-981	Electrochemical promotion of IrO₂ catalyst for the gas phase combustion of ethylene	E. Varkaraki, J. Nicole, E. Plattner, Ch. Comninellis and C. G. Vayenas
982-986	Electrochemical reduction of nickel ions from dilute solutions	K. N. Njau and L. J. J. Janssen
987-988	A thin layer, solid-state, primary Li¦Ag₂CrO₄ polymer battery	G. B. Appetecchi, F. Croce, E. Moyroud and B. Scrosati
989-992	News calendar

Volume 25, Number 11 / November 1995

993-1003	Electrodeposition of refractory metals (Ti, Zr, Nb, Ta) from molten salt electrolytes	A. Girginov, T. Z. Tzvetkoff and M. Bojinov
1004-1008	Electrocatalytic properties of mixed transition metal tellurides (Chevrel-phases) for oxygen reduction	C. Fischer, N. Alonso-Vante, S. Fiechter and H. Tributsch
1009-1016	Ion transport in a two membrane electrowinning cell for the production of hydrochloric acid	L. Liao, A. Sandwijk, G. Weert and J. H. W. Wit
1017-1022	A wall-jet electrode reactor and its application to the study of electrode reaction mechanisms Part I: Design and construction	P. Laevers, A. Hubin, H. Terryn and J. Vereecken
1023-1030	A wall jet electrode reactor and its application to the study of electrode reaction mechanisms Part II: A general computational method for the mass transport problems involved	P. Laevers, A. Hubin, H. Terryn and J. Vereecken
1031-1037	Anodic behaviour of zirconium and its alloys in fluorinated nitric media dissolution-passivation model	J. Prong, T. Jaszay, A. Caprani and J. P. Frayret
1038-1044	Electrochemical behaviour of modified activated carbons in aqueous and nonaqueous solutions	M. Pakuła, A. Świątkowski and S. Biniak
1045-1051	Voltammetric study of the Fe-S-Ebonex^® system	A. Gomes, M. I. Silva Pereira, M. H. Mendonça and F. M. A. Costa
1052-1056	Anode-support system for the direct electrorefining of cement copper Part II: Process conditions using a circular cell with vertical rotary cathode	R. Gana, M. Figueroa, L. Kattan, I. Moller and M. A. Esteso
1057-1060	Electrochemical impedance of alkaline zinc/manganese dioxide cells containing no added mercury	M. J. Root
1061-1062	Book reviews	Frank Walsh and A. J. McQuillan
1063-1065	Calendar

Volume 25, Number 12 / December 1995

1067-1082	Photoelectrochemistry and the environment	K. Rajeshwar
1083-1090	Sonovoltammetry at platinum electrodes: surface phenomena and mass transport processes	D. J. Walton, S. S. Phull, A. Chyla, J. P. Lorimer and T. J. Mason, et al.
1091-1097	Electrodeposition of Ni-W-B amorphous alloys	N. Isaev and J. G. Osteryoung
1098-1104	Evaluation of low-temperature cryolite-based electrolytes for aluminium smelting	A. M. Vecchio-Sadus, R. Dorin and E. J. Frazer
1105-1112	Application of metallic foams in an electrochemical pulsed flow reactor Part I: Mass transfer performance	P. Cognet, J. Berlan, G. Lacoste, P. -L. Fabre and J. -M. Jud
1113-1121	Electrodeposition of nickel/silicon carbide composite coatings on a rotating disc electrode	G. Maurin and A. Lavanant
1122-1127	Potential and current distribution on the surface of a hydrogen gas diffusion anode	J. J. T. T. Vermeijlen, L. J. J. Janssen, A. J. Geurts and G. C. Haastrecht
1128-1132	Reversible and irreversible heat effects in ZEBRA cells	B. Cleaver, D. J. Cleaver, L. Littlewood and D. S. Demott
1133-1138	Physicochemical and electrocatalytic properties of LaNiO₃ prepared by a low-temperature route for anode application in alkaline water electrolysis	R. N. Singh, A. N. Jain, S. K. Tiwari, G. Poillerat and P. Chartier
1139-1142	Preparation of neodymium-iron alloys by electrolysis in a fused chloride bath	S. Singh, J. M. Juneja and D. K. Bose
1143-1144	Comments on the article ‘use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings’ by F. Mansfeld	A. T. A. Jenkins and R. D. Armstrong
1145	Reply to comments by R. D. Armstrong and A. T. A. Jenkins on the paper ‘use of EIS for the study of corrosion protection by polymer coatings’ by F. Mansfeld	F. Mansfeld
1146-1148	Calendar

Volume 26, Number 1 / January 1996

1-9	Electrochemical reduction of nitrates and nitrites in alkaline nuclear waste solutions	J. D. Genders, D. Hartsough and D. T. Hobbs
10-17	Production of ethene oxide in a sieve plate electrochemical reactor Part I: Influence of sieve plate design, electrode material and pH	K. Scott and W. Hui
18-29	Electrochemical treatment of human wastes in a packed bed reactor	C. L. K. Tennakoon, R. C. Bhardwaji and J. O'M. Bockris
30-35	Electrocatalytic activities of graphite-supported platinum electrodes for methanol electrooxidation	P. C. Biswas, Y. Nodasaka and M. Enyo
36-44	Cyclic voltammetry of KI at polyaniline-filmed Pt electrodes Part I: Formation of polyaniline-iodine charge transfer complexes	H. Tang, A. Kitani and M. Shiotani
45-50	Cyclic voltammetry of KI at polyaniline-filmed Pt electrodes Part II: Effects of pH	H. Tang, A. Kitani and M. Shiotani
51-57	Electrochemical behaviour of silver-containing copper anodes under simulated electrorefining conditions	E. A. Kucharska-Giziewicz and D. J. Mackinnon
58-62	High speed zinc electrowinning system using a hydrogen anode and a rotating aluminium disc cathode	N. Furuya and T. Sakakibara
63-71	Study of electroless plating fog on plastic surfaces	S. Sugihara, A. Iwasawa, K. Onose and J. Yamaki
72-82	Oxygen evolution and hypochlorite production on Ru-Pt binary oxides	C. -C. Hu, C. -H. Lee and T. -C. Wen
83-89	Preparation of SnO₂-Sb₂O₅ films by the spray pyrolysis technique	B. Correa-Lozano, Ch. Comninellis and A. Battisti
90-94	Physico-chemical properties of Zn-Fe alloy deposits from an alkaline sulphate bath containing triethanolamine	V. Narasimhamurthy and B. S. Sheshadri
95-101	Stability and electrical properties of polyaniline films formed with EDTA and FeEDTA in the electrolyte	J. H. Zagal, R. R. Río, B. A. Retamal and S. R. Biaggio
102-112	Kinetics and mechanism of the Al(iii)/Al electrode reaction in cryolite-alumina melts	J. Thonstad, A. Kisza and J. Kazmierczak
113-117	Scale-up of an electrochemical cell for oxygen removal from water	A. Tamminen, K. Vuorilehto and S. Yläsaari
118-120	Simultaneous reduction of perrhenate and nickel ions by hypophosphite	I. Genutienė, J. Lenkaitienė, Z. Jusys and A. Luneckas
121-123	Poly(3-methylthiophenes) for an all polymer electrochromic device	C. Arbizzani, M. Mastragostino, L. Meneghello, M. Morselli and A. Zanelli
124	Book reviews	David R. Gabe
125-127	Calendar

Volume 26, Number 2 / February 1996

129-134	Effect of magnetic charging of Ni on electrolytic codeposition of Zn with Ni particles	R. A. Tacken, P. Jiskoot and L. J. J. Janssen
135-142	Theoretical and experimental studies of the effect of side reactions in copper deposition from dilute solutions on packed-bed electrodes	J. M. Bisang
143-146	Electrolytic recovery of chlorine from hydrogen chloride gas with fused molten salt electrolyte LiCl/KCl	Y. Ding and J. Winnick
147-152	Effect of operational potential on performance decay rate in a phosphoric acid fuel cell	J. Aragane, H. Urushibata and T. Murahashi
153-159	Electrocatalytic oxidation of 2-chlorophenol on a composite PbO₂/polypyrrole electrode in aqueous solution	B. J. Hwang and K. L. Lee
161-170	Bulk copper electrodeposition on gold imaged by in situ STM: morphology and influence of tip potential	J. E. T. Andersen, G. Bech-Nielsen, P. Møller and J. C. Reeve
171-173	Correlation of in situ and ex situ responses of the QCM accompanying silver deposition	S. Bruckenstein, K. C. Kanige and A. R. Hillman
175-185	A model for the Kolbe reaction of acetate in a parallel-plate reactor	J. -F. Yan, P. S. Fedkiw and C. G. Law
187-193	An electrochemical current efficiency model for aluminium electrolysis cells	Å. Sterten and P. A. Solli
195-201	The pH-dependence of thermally-coated Ti/TiO₂ electrodes in the absence and presence of nitrobenzene	C. Ravichandran, M. Noel and P. N. Anantharaman
203-209	Corrosion du zinc dans un milieu alcalin: Effet d'un traitement de passivation chromique	J. Hazan and C. Comet
211-215	Studies of the oxidation of ethanol on a reticulated nickel rotating cylinder electrode	F. Pasquini and P. Tissot
217-225	Electrooxidation of stainless steel AISI 304 in carbonate aqueous solution at pH 8	M. Drogowska, H. Ménard and L. Brossard
227	Evaluation of calcium-containing zinc electrodes in zinc/silver oxide cells	J. -S. Chen and L. -F Wang
231	Anodic oxidation of zirconium: Effect of fluoride contamination on oxide structure and transport processes	N. Khalil and J. S. L. Leach
235	A model for the determination of chloride and chlorate levels in the caustic product of ion-exchange membrane chlor-alkali cells	C. -P. Chen and B. V. Tilak
239-242	News

Volume 26, Number 3 / March 1996

243-248	An l-amino acid electrode for monitoring beer fermentation	W. J. Albery, J. E. C. Hutchins and M. Uttamlal
249-254	Investigation of the aluminium electrodeposition process in cryolite-based melts using a rotating ring-disc electrode: evidence for the existence of a subvalent intermediate species	R. S. Stojanovic, R. Dorin and E. J. Frazer
255-267	The Li/Li⁺ couple in propylene carbonate electrolytes and poly(methyl methacrylate) gels	A. M. Christie and C. A. Vincent
269-275	Electrochemical sensor for measuring magnesium content in molten aluminium	L. Zhang, D. J. Fray, J. Vangrunderbeek and F. Schutter
277-281	Electrochemical refining of tin through thin-layers of molten electrolytes	A. A. Omel'chuk, O. G. Zarubitskii, V. N. Gorbach and V. E. D'yakov
283-290	Zinc-nickel alloy electrodeposition from uncomplexed acid bath	M. Pushpavanam and K. Balakrishnan
291-296	Influence of anions on the performance of isomers of aminobenzoic acid on the corrosion inhibition and hydrogen permeation through mild steel in acidic solutions	S. Muralidharan, B. Ramesh Babu, S. Venkatakrishna Iyer and S. Rengamani
297-304	Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells	V. A. Paganin, E. A. Ticianelli and E. R. Gonzalez
305-309	Multiple-electrode method for estimating the polarization resistance in large structures	S. Feliu, J. A. González and C. Andrade
311-317	High performance copper oxide cathodes for high temperature solid-oxide fuel cells	C. -L. Chang, T. -C. Lee and T. -J. Huang
319-324	Electrodeposition of titanium diboride from fused salts	M. Makyta, V. Daněk, G. M. Haarberg and J. Thonstad
325-336	Influence of carbon monoxide, ethylene, acetylene, allyl alcohol and propargyl alcohol on nickel electrodissolution in aqueous sulfuric acid solution	C. F. Zinola, A. M. Castro Luna and A. J. Arvia
337-341	Characterization of aqueous rubidium chloride as an equitransferent ultraconcentrated salt bridge	C. Buizza, P. R. Mussini, T. Mussini and S. Rondinini
343-352	Performance and thermodynamic properties of Na-Sn and Na-Pb molten alloy electrodes for alkali metal thermoelectric converter (AMTEC)	Q. Fang and H. Wendt
353-359	Meniscus shape and lateral wetting at the hanging meniscus rotating disc (HMRD) electrode	H. M. Villullas and M. Lopez Teijelo
361-363	A simple nondestructive electrochemical method to test the barrier resistance of organic coatings	A. Metrot and C. Nicollin
364-367	News

Volume 26, Number 4 / April 1996

369-377	Zinc removal from dilute solutions using a rotating cylinder electrode reactor	J. St-Pierre, N. Massé, É. Fréchette and M. Bergeron
379-384	Selective electrodeposition of metals from simulated waste solutions	R. D. Armstrong, M. Todd, J. W. Atkinson and K. Scott
385-396	Study of a mechanism of hard gold electrodeposition	W. Chrzanowski, Y. G. Li and A. Lasia
397-402	A study of RuO₂ as an electrocatalyst for hydrogen evolution in alkaline solution	N. Spãtaru, J. -G. Helloco and R. Durand
403-411	Anodic dissolution of rapidly quenched amorphous Ni₈₁P₁₉ alloys of different initial melt temperatures	L. Péter, G. Láng, L. Kiss and J. Szalma
413-418	Electrodeposition of Sn-Co alloys from gluconate baths	S. S. Rehim, S. A. Refaey, G. Schwitzgebel, F. Tara and M. B. Saleh
419-423	Effects of additives on the electrodeposition of tin from an acidic Sn(II) bath	G. S. Tzeng, S. H. Lin, Y. Y. Wang and C. C. Wan
425-429	Characteristics of polypyrrole chemically synthesized by various oxidizing reagents	K. Nishio, M. Fujimoto, O. Ando, H. Ono and T. Murayama
431-437	A novel procedure in the galvanic deposition of Zn alloys for the preparation of large area Ni and Ni-Co surfaces	S. A. S. Machado, J. Tiengo, P. Lima Neto and L. A. Avaca
439-442	Control of oxygen deficiency in Ca_1−xLa_xMnO_3−δ and its cathodic properties in alkaline solution	T. Esaka, M. Kamata and M. Ohnishi
443-449	Impedance investigation of corrosion inhibition of armco iron by thiourea	M. Metikoš-Hukovič, R. Babić, Z. Grubač and S. Brinić
451-457	Silver electrocrystallization from a nonpolluting aqueous leaching solution containing ammonia and chloride	A. Serruya, B. R. Scharifker, I. González, M. T. Oropeza and M. Palomar-Pardavé
459-462	Calendar

Volume 26, Number 5 / May 1996

463-469	Chronoamperometry at channel electrodes: analytical theory of transient behaviour at double electrodes	R. G. Compton, J. J. Gooding and A. Sokirko
471-479	Modelling mass transfer entrance lengths in turbulent pipe-flow with applications to small cathodes for measuring local mass transfer rates	Y. Wang, J. Postlethwaite and D. J. Bergstrom
481-486	Current distribution in aluminium electrolysis cells with Søderberg anodes Part I: Experimental study and estimate of anode consumption	Z. Kuang and J. Thonstad
487-491	Electrochemical investigation of Ni−P autocatalytic deposition in ammoniacal solutions	M. Ebn Touhami, M. Cherkaoui, A. Srhiri, A. Ben Bachir and E. Chassaing
493-502	A phenomenological approach to hydrous nickel oxide electrodes prepared by applying periodic potential routines	A. Visintin, W. E. Triaca and A. J. Arvia
503-507	Passivation and pitting corrosion of tin in gluconate solutions and the effect of halide ions	S. A. M. Refaey
509-514	The chronopotentiometric method for measuring the kinetics of metal dissolution and cementation reactions	J. Zheng, M. Khan, S. R. La Brooy, I. M. Ritchie and P. Singh
515-521	Active surface area in oxide electrodes by overpotential deposited oxygen species for the oxygen evolution reaction	J. C. K. Ho and D. L. Piron
523-527	Anodic oxidation of dimethyl sulfoxide based electrolyte solutions: Anin situ FTIR study	P. Krtil, L. Kavan, I. Hoskovcová and K. Kratochvilová
529-535	Magnetic properties and microstructure of electrodeposited Fe−P amorphous alloy	K. Kamei and Y. Maehara
537-541	Electrodeposition of Zn−Ni−Fe alloy in acidic chloride bath with separated anodes	M. M. Younan and T. Oki
543-545	Paired electrooxidation Part III: Production ofn-butyric acid fromn-butanol	Y. -L. Chen and T. -C. Chou
547-549	Electrochemical impedance of AgO/Zn and HgO/Zn cells	M. J. Root
551-553	Viscous flow and MOS properties of MgF₂−B₂O₃−GeO₂−SiO₂ glasses with ionic bonds	K. Kobayashi
555-556	Calendar

Volume 26, Number 6 / June 1996

557-565	Influence of rib spacing in proton-exchange membrane electrode assemblies	A. C. West and T. F. Fuller
567-574	Electrochemical remediation of metal-bearing wastewaters Part I: Copper removal from simulated mine drainage waters	T. L. Hatfield, T. L. Kleven and D. T. Pierce
575-583	Oxidation of arsenopyrite (FeAsS) in acid Part I: Reactivity of arsenopyrite	P. G. Fernandez, H. G. Linge and M. W. Wadsley
585-591	Oxidation of arsenopyrite (FeAsS) in acid Part II: Stoichiometry and reaction scheme	P. G. Fernandez, H. G. Linge and M. J. Willing
593-601	A survey of platinum hydrous oxide electrochemistry at elevated temperature: evidence for a new component in the β-deposit	L. D. Burke and J. A. Morrissey
603-611	Determination of transport and electrochemical kinetic parameters of M-H electrodes	B. N. Popov, G. Zheng and R. E. White
613-616	Interfacial conductivity observation of CaF₂ ionic conductor films using Lewis-acidic effect	Y. Saito
617-622	Electrochemically induced alumina coatings on stainless steel: composition and behaviour at high temperature	L. Aries, J. Roy, J. Sotoul, V. Pontet and P. Costeseque, et al.
623-630	Characterization of Pt-Cu-Fe ternary electrocatalysts supported on carbon black	W. Roh, J. Cho and H. Kim
631-637	Application of metallic foams in an electrochemical pulsed flow reactor Part II: Oxidation of benzyl alcohol	P. Cognet, J. Berlan, G. Lacoste, P. -L. Fabre and J. -M. Jud
639-645	Electrochemical absorption-desorption of hydrogen on multicomponent Zr-Ti-V-Ni-Cr-Fe alloys in alkaline solution	M. Kopczyk, G. Wójcik, G. Mlynarek, A. Sierczyńska and M. Beĺtowska-Brzezinska
647-653	A comparison of the electrochromic properties of WO₃ films intercalated with H⁺, Li⁺ and Na⁺	D. Dini, F. Decker and E. Masetti
655-663	Mass transfer between a liquid and a binary rotating/fixed disc system in a closed cylinder	E. B. Cavalcanti and F. Coeuret
665-672	Pulse electroplating of rich-in-tungsten thin layers of amorphous Co-W alloys	M. Donten and Z. Stojek
673-678	Paired electrooxidative degradation of phenol with in situ electrogenerated hydrogen peroxide and hypochlorite	J. -S. Do and W. -C. Yeh
679-682	Calendar

Volume 26, Number 7 / July 1996

683-688	Electrochemical properties of Ti/SnO₂-Sb₂O₅ electrodes prepared by the spray pyrolysis technique	B. Correa-Lozano, Ch. Comninellis and A. Battisti
689-692	Electrochemical characterization of polymer precoated lithium electrodes	C. Liebenow and K. Lühder
693-701	Recovery of pickling effluents by electrochemical oxidation of ferrous to ferric chloride	P. F. Marconi, V. Meunier and N. Vatistas
703-709	Low temperature electrochemical oxidation of sulfur dioxide	I. Nikolov, K. Petrov and T. Vitanov
711-720	Electrodeposition of membrane-oriented conducting poly(pyrrole, thiophene) on stainless steel meshes	M. Zhou, M. Persin and J. Sarrazin
721-732	Electrosynthesis of a manganese(iii) aminopolycarboxylate complex in alkaline media	E. L. Gyenge and C. W. Oloman
733-740	Characterization of electroless Ni-Mo-P/SnO₂/Ti electrodes for oxygen evolution in alkaline solution	Y. L. Lo, S. C. Chou and B. J. Hwang
741-749	Behaviour of poly(ethylene glycol) during electrodeposition of bright copper coatings in sulfuric acid electrolytes	D. Stoychev and C. Tsvetanov
751-756	A direct methanol fuel cell using acid-doped polybenzimidazole as polymer electrolyte	J. -T. Wang, J. S. Wainright, R. F. Savinell and M. Litt
757-762	Adsorption of N-phenylmaleimide and its derivatives on iron electrodes in sulfuric acid solutions	E. Lazarova, T. Yankova and G. Neykov
763-766	Permeation and electrocatalytic reduction of oxygen by poly(o-phenylenediamine) incorporated into Nation® film	J. Premkumar and R. Ramaraj
767-769	Indirect reduction of o- and m-nitrobenzoic acids at a Ti/ceramic TiO₂ cathode	D. Vasudevan and P. N. Anantharaman
770	Book review	Frank C. Walsh
771-774	News

Volume 26, Number 8 / August 1996

775-784	Voltammetry in the presence of ultrasound: mass transport effects	R. G. Compton, J. C. Eklund, S. D. Page, T. J. Mason and D. J. Walton
785-793	Synthesis and characterization of Pt-Ti₄O₇ microelectrode arrays	L. He, H. F. Franzen and D. C. Johnson
795-802	Current distribution in aluminium electrolysis cells with Søderberg anodes Part II: Mathematical modelling	J. Zoric, I. Rousar, Z. Kuang and J. Thonstad
803-814	Arsenic poisoning effects on cathodic polarization and hydrogen adsorption at platinum and steel electrodes in KF · 2HF melts	L. J. Gao, S. Y. Qian and B. E. Conway
815-822	Electrochemical generation of ferrate Part I: Dissolution of an iron wool bed anode	A. Denvir and D. Pletcher
823-827	Electrochemical generation of ferrate Part 2: Influence of anode composition	A. Denvir and D. Pletcher
829-832	An electrochemical steam pump using a proton conducting ceramic	H. Iwahara, T. Hibino and T. Sunano
833-841	Electroconductive membrane ‘Celec’ for application in zinc/air alkaline batteries: An impedance study of oxygen reduction at the interface Pt/Celec	D. B. Zhou and H. Vander Poorten
843-852	Nucleation and crystal growth in gold electrodeposition from acid solution Part I: Soft gold	Y. G. Li, W. Chrzanowski and A. Lasia
853-863	Nucleation and crystal growth in gold electrodeposition from acid solution Part II: Hard gold	Y. G. Li and A. Lasia
865-872	Modelling electrode transients: the strongly implicit procedure	J. A. Alden, R. G. Compton and R. A. W. Dryfe
873-880	Studies of platinum electroplating baths Part IV: Deposits on copper from Q bath	W. J. Basirun, D. Pletcher and A. Saraby-Reintjes
881-885	An electrochemical device for oxygen production avoiding the generation of hydrogen	C. A. Ma and W. G. Yu
887-890	Electrodeposition of vanadium from a molten salt bath	P. K. Tripathy, J. C. Sehra, D. K. Bose and R. P. Singh
891	Book reviews	David R. Gabe and Frank Walsh
893-897	Calendar

Volume 26, Number 9 / September 1996

899-907	Relaxation of the lead-deficient sulfide surface layer on oxidized galena	A. N. Buckley and R. Woods
909-917	Methanol permeability in perfluorosulfonate proton exchange membranes at elevated temperatures	P. S. Kauranen and E. Skou
919-923	Influence of anode material on current yields during ferrate(vi) production by anodic iron dissolution Part I: Current efficiency during anodic dissolution of grey cast iron to ferrate(vi) in concentrated alkali hydroxide solutions	K. Bouzek and I. Roušar
925-931	Influence of anode material on current yield during ferrate(vi) production by anodic iron dissolution Part II: Current efficiency during anodic dissolution of white cast iron to ferrate(vi) in concentrated alkali hydroxide solutions	K. Bouzek, I. Roušar and M. A. Taylor
933-937	A solid polymer electrolyte-based ethanol gas sensor	P. Millet, A. Michas and R. Durand
939-946	Influence of molybdenum on the anodic dissolution of iron in acidic solutions	M. Bojinov, I. Betova and R. Raicheff
947-951	Low pressure hydride anode materials for rechargeable batteries	H. Kronberger
953-958	Investigation of the hydrogen evolution reaction at a 10 wt% palladium-dispersed carbon electrode using electrochemical impedance spectroscopy	S. -I. Pyun, T. -H. Yang and C. -S. Kim
959-967	Chemical and morphological characterization of a direct methanol fuel cell based on a quaternary Pt-Ru-Sn-W/C anode	A. S. Aricò, P. Cretì, N. Giordano, V. Antonucci and P. L. Antonucci, et al.
969-975	Effect of halide ions on electroless nickel plating	G. -S. Tzeng
977-980	The effect of imposed electrical current on torque release at the metal-mudcake interface	N. Bonanos, N. P. Brandon, M. N. Mahmood and D. Brown
981	Book review	Pierre Bersier
983-987	Calendar

Volume 26, Number 10 / October 1996

989-997	Electrocatalytic hydrogenation of soybean oil in a radial flow-through Raney nickel powder reactor	G. Yusem, P. N. Pintauro, P. -C. Cheng and W. An
999-1005	Effect of coating thickness and surface treatment of titanium on the properties of IrO₂-Ta₂O₅ anodes	J. Krýsa, L. Kule, R. Mráz and I. Roušar
1007-1018	Capacitive deionization of NH₄ClO₄ solutions with carbon aerogel electrodes	J. C. Farmer, D. V. Fix, G. V. Mack, R. W. Pekala and J. F. Poco
1019-1025	Design and performance of a laboratory cell for determination of current efficiency in the electrowinning of aluminium	P. A. Solli, T. Eggen, S. Rolseth, E. Skybakmoen and Å Sterten
1027-1035	Impedance and transient study of aluminium barrier-type oxide films	S. Gudić, J. Radošević and M. Kliškić
1037-1043	Anion incorporation and its effect on the dielectric constant and growth rate of zirconium oxides	M. A. Abdel Rahim, A. A. Abdel Rahman and M. W. Khalil
1045-1052	Electrochemical behaviour of iron and iron oxide thin films in alkaline (1 m
1053-1057	Reduction of dioxygen in neutral solution at polypyrrole electrode	S. Biallozor, T. Zalewska and A. Lisowska-Oleksiak
1059-1063	Effect of pulsating electrolysis parameters on the morphology and structure of Pd-Ag powder	L. Nikolova, K. Ignatova and S. Stefanova
1065-1069	Zinc-nickel alloy deposition in the presence of citrate ions	M. Pushpavanam and K. Balakrishnan
1071-1073	Concentration and purification of wet industrial phosphoric acid by electro-electrodialysis	D. Touaibia, H. Kerdjoudj and A. T. Cherif
1074-1077	Calendar

Volume 26, Number 11 / November 1996

1083-1092	Anodic dissolution of nickel in concentrated sulfuric acidic solutions	G. Cordeiro, O. R. Mattos, O. E. Barcia, L. Beaunier and C. Deslouis, et al.
1093-1102	Hydrodynamic modelling of the liquid-solid behaviour of the circulating particulate bed electrode	B. M. Dweik, C. C. Liu and R. F. Savinell
1103-1110	Corrosion behaviour of duplex stainless steels containing minor ruthenium additions in reducing acid media	J. H. Potgieter, W. O. Barnard, G. Myburg, K. Varga and P. Baradlai, et al.
1111-1115	A cyclic voltammetric study on the electrocatalysis of alkaline iron-electrode reactions	M. K. Ravikumar, T. S. Balasubramanian, A. K. Shukla and S. Venugopalan
1117-1123	Preparation and evaluation of electrocatalytic oxide coatings on conductive carbon-polymer composite substrates for use as dimensionally stable anodes	A. Brungs, V. Haddadi-Asl and M. Skyllas-Kazacos
1125-1132	Characterization of the efficiency of antiscale treatments of water Part I: Chemical processes	C. Gabrielli, M. Keddam, H. Perrot, A. Khalil and R. Rosset, et al.
1133-1137	Electrolytic generation of hydrogen on Pt-loaded porous graphite electrodes from flowing alkaline solutions	M. S. El-Deab, M. E. El-Shakre, B. E. El-Anadouli and B. G. Ateya
1139-1146	Oxygen electrocatalysis under fuel cell conditions: behaviour of cobalt porphyrins and tetraazaannulene analogues	A. Biloul, P. Gouérec, M. Savy, G. Scarbeck and S. Besse, et al.
1147-1160	Electrochemistry of room-temperature chloroaluminate molten salts at graphitic and nongraphitic electrodes	R. T. Carlin, J. Fuller, W. K. Kuhn, M. J. Lysaght and P. C. Trulove
1161-1167	Rate effect on lithium-ion graphite electrode performance	T. D. Tran, J. H. Feikert, R. W. Pekala and K. Kinoshita
1169-1177	Impedance study of the passive film on stainless steel 304 in pH 8 carbonate solution	M. DRogowska, H. Ménard, A. Lasia and L. Brossard
1179-1183	Influence of thiourea and thiourea ageing on the electrodeposition of copper from acid sulfate solutions studied by the ring-disc technique	G. Fabricius, K. Kontturi and G. Sundholm
1185-1193	Interaction of aqueous silver ions with the surface of pyrite	L. M. Maddox, G. M. Bancroft and J. W. Lorimer
1195-1199	Electrocatalytic properties of ternary oxide mixtures of composition Ru_0.3Ti_(0.7−x)Ce_xO₂: oxygen evolution from acidic solution	L. A. Faria, J. F. C. Boodts and S. Trasatti
1201-1204	Effect of surface modification on performance of alloy electrodes for hydrogen storage	Z. Y. Tang, W. X. Chen, Z. L. Liu and H. T. Guo
1205-1208	Calendar

Volume 26, Number 12 / December 1996

1209-1215	Mass transfer studies at iron felts	D. S. Lizárraga and J. M. Bisang
1217-1223	Aluminium alloys in sulfuric acid Part II: Aluminium-oxygen cells	S. Müller, F. Holzer, J. Desilvestro and O. Haas
1225-1234	Pulse plating of Zn-Ni alloy coatings	A. M. Alfantazi, J. Page and U. Erb
1235-1244	Mass transport in a weakly stratified electrochemical cell	C. F. Wallgren, F. H. Bark, R. Eriksson, D. S. Simonsson and J. Perssont, et al.
1245-1252	Effects of 2-picoline on zinc electrowinning from acidic sulfate electrolyte	S. C. Das, P. Singh and G. T. Hefter
1253-1258	Influence of substituted benzothiazoles on corrosion in acid solution	M. A. Quraishi, M. A. Wajid Khan, M. Ajmal, S. Muralidharan and S. Venkatakrishna Iyer
1259-1265	A synergistic effect between zinc salt and phosphonic acid for corrosion inhibition of a carbon steel	Y. Gonzalez, M. C. Lafont, N. Pebere and F. Moran
1267-1272	Changes in cathode catalyst structure and activity in phosphoric acid fuel cell operation	T. Maoka, T. Kitai, N. Segawa and M. Ueno
1273-1277	Effect of cysteine on the kinetics of electroless nickel deposition	K. P. Han and J. L. Fang
1279-1285	Electrochemical reduction of Fe(ii) ions on different solid electrodes in fused ZnCl₂-2NaCl mixture	Y. Castrillejo, A. M. Martinez, M. Vega and P. Sanchez Batanero
1287-1294	Electrodeposition of gold in ammoniacal medium: influence of substrate and temperature	G. Trejo, A. F. Gil and I. González
1295-1296	News

Volume 27, Number 1 / January 1997

1-8	Selective electrogenerative oxidation of benzyl alcohol with platinum–graphite packed-bed anodes	G. R. DIECKMANN and S. H. LANGER
9-17	Fibrous metal–carbon composite structures as gas diffusion electrodes for use in alkaline electrolyte	S. AHN and B. J. TATARCHUK
19-24	Preparation and characterization of matrices for phosphoric acid fuel cells	M. I. CAIRES, M. L. BUZZO, E. A. TICIANELLI and E. R. GONZALEZ
25-33	Electrocatalytic oxidation of sucrose: analysis of the reaction products	P. PARPOT, K. B. KOKOH, E. M. BELGSIR, J.-M. LE´GER and B. BEDEN, et al.
35-41	Indium as a cathodic material: catalytic reduction of formaldehyde	S. OMANOVIC´ and M. METIKOŠ-HUKOVIČ
43-49	Electrode impedance parameters and internal resistance of a sealed LiC/Li1-xCoO2 lithium-ion rechargeable battery	V. GANESH KUMAR, N. MUNICHANDRAIAH and A. K. SHUKLA
51-57	An investigation of the electrochemical reduction of pentachlorophenol with analysis by HPLC	N. C. ROSS, R. A. SPACKMAN, M. L. HITCHMAN and P. C. WHITE
59-63	A capacitance study of the silver(I)/copper displacement reaction	I. M. RITCHIE and S. G. ROBERTSON
65-70	Electrodialysis of acid effluents containing metallic divalent salts: recovery of acid with a cation-exchange membrane modified in situ	P. SISTAT, G. POURCELLY, C. GAVACH, N. TURCOTTE and M. BOUCHER
71-75	Ionic conductivity of perovskite LaCoO3 measured by oxygen permeation technique	C. H. CHEN, H. KRUIDHOF, H. J. M. BOUWMEESTER and A. J. BURGGRAAF
77-82	Effect of pyrolysis temperature of the catalytic activity of active carbon+cobalt phthalocyanine in sulfur dioxide oxidation by oxygen	I. NIKOLOV, I. VITANOVA, V. NAJDENOV, T. MILUSHEVA and T. VITANOV
83-92	Electrochemical extraction of oxygen from air via hydroperoxide ion	E. BRILLAS, A. MAESTRO, M. MORATALLA and J. CASADO
93-98	Influence of lead(II) carbonate films of non-antimonial grids on the deep discharge cycling behaviour of maintenance-free lead/acid batteries	R. DE MARCO
99-103	Anode-support system for the direct electrorefining of cement copper Part III: Pretreatment and process conditions to refine industrial cement	M. FIGUEROA, R. GANA, L. KATTAN, S. ME´NDEZ and L. PALMA
105-108	Microstructure and hardness of brush plated Ni–Fe–W–P–S alloy	W.-H. HUI, J.-J. LIU and J.K. DENNIS
109-111	Characterization of surface roughness by EHD impedance	C. DESLOUIS, N. TABTI and B. TRIBOLLET
113	Comments on the use of electrochemical impedance for evaluation of disbonding of organic films	M. W. KENDIG

Volume 27, Number 2 / February 1997

117-123	Oxygen and hydrogen permeation properties and water uptake of Nafion® 117 membrane and recast film for PEM fuel cell	K. BROKA and P. EKDUNGE
125-133	Lactic acid production by electrodialysis Part I: Experimental tests	N. BONIARDI, R. ROTA, G. NANO and B. MAZZA
135-145	Lactic acid production by electrodialysis Part II: Modelling	N. BONIARDI, R. ROTA, G. NANO and B. MAZZA
147-152	Design of a slurry electrode reactor system	B. KASTENING, T. BOINOWITZ and M. HEINS
153-160	Evaluation of the chemical stability of some membranes in vanadium solution	T. MOHAMMADI and M.SKYLLAS KAZACOS
161-168	A near-infrared FT-Raman (SERS) and electrochemical study of the synergistic effect of 1-[(1′,2′-dicarboxy)ethyl]-benzotriazole and KI on the dissolution of copper in aerated sulfuric acid	D. P. SCHWEINSBERG, S. E. BOTTLE, V. OTIENO-ALEGO and T. NOTOYA
169-177	Pitting of AISI 304 stainless steel in bicarbonate and chloride solutions	M. DROGOWSKA, H. ME´NARD and L. BROSSARD
179-183	Air corona removal of phenols	J.L. BRISSET
185-191	Internal stress and magnetic properties of electrodeposited amorphous Fe–P alloys	S. ARMYANOV, S. VITKOVA and O. BLAJIEV
193-200	Phenothiazine as inhibitor of the corrosion of cadmium in acidic solutions	A. EL-SAYED
201-207	Mass transfer in smooth and rough annular ducts under developing flow conditions	A. A. MOBARAK, H. A. FARAG and G. H.SEDAHMED
209-214	Electrodeposition behaviour of zinc-iron group metal alloys from a methanol bath	T. TSURU, S. KOBAYASHI, T. AKIYAMA, H. FUKUSHIMA and S. K. GOGIA, et al.
215-220	Preparation of Raney–Ni gas diffusion electrode by filtration method for alkaline fuel cells	SLEEM -UR-RAHMAN, M. A. AL-SALEH, A. S. AL-ZAKRI and S. GULTEKIN
221-225	Reversibility of electrochemical magnesium deposition from Grignard solutions	C. LIEBENOW
227-234	A mixture design approach to thermally prepared Ir–Pt–Au ternary electrodes for oxygen reduction in alkaline solution	Y. -J. LI, C. -C. CHANG and T. -C. WEN
235-239	Synthesis and electrochemical properties of new viologen polymers	M. LIEDER and C. W. SCHLA¨PFER
335-344	Electrochemical and ellipsometric study of the oxide films formed on copper in borax solution: Part I: Effect of oxygen	J. O. ZERBINO and M. F. L. DE MELE

Volume 27, Number 3 / March 1997

243-253	The manganese dioxide electrode: Part XIII: An FTIR study of H-insertion into EMD	J. FITZPATRICK, L. A. H. MACLEAN, D. A. J. SWINKELS and F. L. TYE
255-265	Effect of electrolyte composition on the dynamics of hydrogen gas bubble evolution at copper microelectrodes	P. Kristof and M. Pritzker
267-279	Dissolution and passivation processes in the corrosion of copper and nickel in KF.2HF at 85 °C	H. DUMONT, S.Y. QIAN and B.E. CONWAY
281-289	Modelling the PEM fuel cell cathode	K. BROKA and P. EKDUNGE
291-298	Behaviour of pHsensitive polymers on metal electrodes	S. KRAUSE, C. J. McNEIL, R. D. ARMSTRONG and W. O. HO
299-307	Determination of the practical range of parameters during reverse-pulse current plating	S. ROY and D. LANDOLT
309-316	Synthesis and characterization of malonic acid-doped polyaniline	M. KARAKIS¸LA, M. SAC¸AK, E. ERDEM and U. AKBULUT
317-324	Electrochemical behaviour of 1024 mild steel in slightly alkaline bicarbonate solutions	S. SIMARD, M. DROGOWSKA, H. ME´NARD and L. BROSSARD
325-334	Corrosion and corrosion inhibition of alumina particulate/aluminium alloys metal matrix composites in neutral chloride solutions	C. MONTICELLI, F. ZUCCHI, G. BRUNORO and G. TRABANELLI
345-349	Butyl substituents in n-butylamine and their influence on mild steel corrosion inhibition in hydrochloric acid	J. M. BASTIDAS, J. DE DAMBORENEA and A. J. VA´ZQUEZ
351-354	Electrochemical dissolution of tungsten under pulsed conditions	A.D. DAVYDOV, V.S. SHALDAEV, A.N. MALOFEEVA and I.V. SAVOTIN
355-363	Kinetics of oxygen reduction at RuO2-coated titanium electrode in alkaline solution	C. -C. CHANG and T. -C. WEN
365-367	Effects of SiC and Si3N4 fillers on the electrical properties of (PEO)16LiClO4 electrolytes	B. -K. CHOI and K. -H. SHIN

Volume 27, Number 4 / April 1997

371-378	Ohmic resistance of solution in a vertical gas-evolving cell	M. P. M. G. WEIJS, L. J. J. JANSSEN and G. J. VISSER
379-384	Modelling the startup of a continuous parallel plate electrochemical reactor	J. M. Bisang
385-395	Applied studies on immobilized titanium dioxide films ascatalysts for the photoelectrochemical detoxification of water	I. M. Butterfield, P. A. Christensen, A. Hamnett, K. E. Shaw and G. M. Walker, et al.
396-403	Electrochemical and ellipsometric study of the oxide films formed on copper in borax solution: Part II: Effect of ozone	M. F. L. DE MELE, M. R. VIERA and J. O. ZERBINO
404-413	Electrowinning magnesium from its oxide in a melt containing neodymium chloride	K. J. CATHRO, R. L. DEUTSCHER and R. A. SHARMA
414-421	Electrochemical investigation of copper oxide films formed by oxygen plasma treatment	N. BELLAKHAL, K. DRAOU and J. L. BRISSET
422-427	On the behaviour of tin-containing species in cryolite–alumina melts	J. -H. YANG and J. THONSTAD
428-433	Preparation of highly dispersed gold microparticles and their electrocatalytic activity for the oxidation of formaldehyde	H. YANG, T. H. LU, K. H. XUE, S. G. SUN and S. P. CHEN
434-440	Visual observation of bubbles at horizontal electrodes and resistance measurements on vertical electrodes	K. QIAN, J. J. J.CHEN and N. MATHEOU
441-447	Relation between ambient humidity and ionic conductivity of poly(thionaphtheneindole): behaviour as an amperometric humidity sensor	G. CASALBORE-MICELI, N. CAMAIONI, G. BEGGIATO, M. CAMPOS and C. M. MARI
448-454	Electrochemical investigations of copper etching by Cu(NH3)4Cl2 in ammoniacal solutions	A. DARCHEN, R. DRISSI-DAOUDI and A. IRZHO
455-461	Hardening and smoothing effects of lignin sulfonates on the electrodeposition of lead	K. JOBST, A. GRAHL, W. GRUNER and H. WARLIMONT
462-468	Effect of gelling on the surface structure of a porous lead electrode in sulfuric acid	M. P. VINOD, A. B. MANDLE, S. R. SAINKAR and K. VIJAYAMOHANAN
469-476	Mass transfer in an annular electrodialysis cell in pulsating flow	J. GARCI´A-ANTO´N, V. PE´REZ-HERRANZ and J. L. GUIN~O´N
477-481	Preparation of polyaniline-poly (p-styrenesulfonic acid) composite by post-polymerization and application as positive active material for a rechargeable lithium battery	H. TSUTSUMI, S. YAMASHITA and T. OISHI
482-492	Interfacial pH measurement during the reduction of dissolved oxygen in a submerged impinging jet cell	C. DESLOUIS, I. FRATEUR, G. MAURIN and B. TRIBOLLET
493	Book Review: Oxford chemistry primers – Electrode potentials	R. G. Compton and G. H. W. Sanders

Volume 27, Number 5 / May 1997

497-506	Mechanism of hydrogen oxidation on a platinum-loaded gas diffusion electrode	J. J. T. T. VERMEIJLEN, L. J. J. JANSSEN and G. J. VISSER
507-518	Electrochemical production of polysulfides and sodium hydroxide from white liquor: Part I: Experiments with rotating disc and ring-disc electrodes	M. BEHM and D. SIMONSSON
519-528	Electrochemical production of polysulfides and sodium hydroxide from white liquor: Part II: Electrolysis in a laboratory scale flow cell	M. BEHM and D. SIMONSSON
529-538	Cathodic polarization of copper electrode in CuCN–KCN solutions and the current distribution for copper deposition on grooved substrates	A. KATAGIRI, H. INOUE and N. OGURE
539-542	Electrocatalytic hydrogenation of phenol on dispersed Pt: Effect of metal electrochemically active surface area and electrode material	K. AMOUZEGAR and O. SAVADOGO
543-549	Flexible synthesis of mixed metal oxides illustrated for LiMn2O4 and LiCoO2	D. G. FAUTEUX, A. MASSUCCO, J. SHI and C. LAMPE-O¨NNERUD
550-557	Electrochemical study of the corrosion behaviour of copper surfaces modified by nitrogen ion implantation	A. JIMENEZ-MORALES, J. C. GALVAN, R. RODRIGUEZ and J. J. DE DAMBORENEA
558-567	Sodium hydroxide and hydrochloric acid generation from sodium chloride and rock salt by electro-electrodialysis	S. MAZROU, H. KERDJOUDJ, A. T. CHE´RIF and J. MOLE´NAT
568-572	Electrochemical investigation of the Ni–Cu–Mo electrodeposition system	E. BELTOWSKA-LEHMAN and E. CHASSAING
573-578	Magnetic field assisted convection in an electrolyte of nonuniform magnetic susceptibility	R. N. O'BRIEN and K. S. V. SANTHANAM
579-583	Performance of catalytically activated anodes in the electrowinning of metals	S. KULANDAISAMY, J. PRABHAKAR RETHINARAJ, S. C. CHOCKALINGAM, S. VISVANATHAN and K. V. VENKATESWARAN, et al.
584-588	Electrochemical oxidation of isobutanol to isobutyric acid at nickel oxide electrode: improvement of the anode stability	A. S. VAZE, S. B. SAWANT and V. G. PANGARKAR
589-597	Electrochemical regeneration of Ce(iv) for oxidation of p-methoxytoluene	T. TZEDAKIS and A. SAVALL
598-604	Hydruration de Ti–Ni hypertrempe par l'hydroge`ne electrolytique a` 25°C puis par l‘hydrogene gaz active thermiquement: Relation entre la structure de TiNiHx et sa capacite´ de stockage d'hydroge`ne	F. BASILE
605-611	Electrocatalytic hydrogenolysis of lignin model dimers at Raney nickel electrodes	B. MAHDAVI, A. LAFRANCE, A. MARTEL, J. LESSARD and H. ME´NARD, et al.
612-615	Breakdown and crystallization processes in niobium oxide films in oxalic acid solution	M. B. J. G. FREITAS and L. O. S. BULHO~ES
616-620	Influence of phosphorous acid on the nucleation and growth of copper	M. URDA, L. ONICIU, J-L. DELPLANCKE and R. WINAND

Volume 27, Number 6 / June 1997

623-634	Electrochemical treatment of low-level nuclear wastes	J. O'M. BOCKRIS and J. KIM
635-642	Structural changes induced by chemical reduction of various MnO2 species	F. JEAN, C. CACHET, L. T. YU, A. LECERF and A. QUIVY
643-650	Study of gold deposition on copper by electrochemical and microscopic techniques	Y. G. LI and A. LASIA
651-658	Electrochemistry of molten LiCl–KCl–CrCl3 and LiCl–KCl–CrCl2 mixtures	A. COTARTA, J. BOUTEILLON and J.C. POIGNET
659-666	LSV, XPS and AES investigations on composite films of 1-phenyl-5-mercaptotetrazole with Mo(W)–S–Cu cluster compounds	X. R. YE, X. Q. XIN and F. B. XIN
667-672	Measuring variation in EMD reduction with location in primary alkaline batteries	A. URFER, G. A. LAWRANCE and D. A. J. SWINKELS
673-678	Zinc electrowinning from acidic sulfate solutions: Part I: Effects of sodium lauryl sulfate	B. C. TRIPATHY, S. C. DAS, G. T. HEFTER and P. SINGH
679-684	Influence of anode material on current yield during ferrate(vi) production by anodic iron dissolution: Part III: Current efficiency during anodic dissolution of pure iron to ferrate(vi) in concentrated alkali hydroxide solutions	K. BOUZEK and I. ROUŠAR
685-690	Electrochemical aspects of the immersion treatment of aluminium	E. STOYANOVA and D. STOYCHEV
691-694	Behaviour of benzylidene acetone during zinc electrodeposition in weakly acid solution containing a nonionic surfactant and/or carboxylic acid	D. MOCKUTĖ and G. BERNOTIENĖ
695-698	Effect of dodecylamine on the corrosion behaviour of zinc in ammonium chloride solution	C. HUANG, W. ZHANG and X. CAO
699-705	Electrodeposition of copper and nickel on InBi alloy electrodes	M. AZZAG, M. CHATELUT and O. VITTORI
706-712	Improved yields of oxalate, glyoxylate and glycolate from the electrochemical reduction of carbon dioxide in methanol	B. R. EGGINS, C. ENNIS, R. McCONNELL and M. SPENCE
713-719	Effect of zinc on the electrocrystallization of cobalt	N. PRADHAN, T. SUBBAIAH, S. C. DAS and U. N. DASH
720-730	Influence of antimony ions and PbSO4 content in the corrosion layer on the properties of the grid/active mass interface in positive lead–acid battery plates	D. PAVLOV, A. DAKHOUCHE and T. ROGACHEV
731-737	Cathodic polarization characteristics and activation of aluminium in chloride solutions containing indium and zinc ions	S. B. SAIDMAN and J. B. BESSONE
738-744	The effects of 4-ethylpyridine and 2-cyanopyridine on zinc electrowinning from acidic sulfate solutions	S. C. DAS, P. SINGH and G. T. HEFTER
745	Praseodymium–calcium manganites (Pr1−xCaxMnO3) as electrode catalyst for oxygen reduction in alkaline solution	T. HYODO, M. HAYASHI, S. MITSUTAKE, N. MIURA and N. YAMAZOE

Volume 27, Number 7 / July 1997

749-755	Application of a solid ion-exchange electrolyte in three-dimensional electrodes	K. VUORILEHTO and A. TAMMINEN
756-761	Iron deposition from a FeCl2 solution containing suspended silicon particles	A. HOVESTAD, R. ANSINK and L. J. J. JANSSEN
762-773	Smooth Raney nickel coatings for cathodic hydrogen evolution by chemical gas phase reaction of nickel electrode surfaces	Th. BORUCINSKY, S. RAUSCH and H. WENDT
774-783	Multiple model-based controller design applied to an electrochemical batch reactor	A. KRISHNAN and K. A. KOSANOVICH
784-792	Design of spectroelectrochemical cell for in situ X-ray absorption fine structure measurements of bulk solution species	M. R. ANTONIO, L. SODERHOLM and I. SONG
793-798	Electrocatalysis for the reduction of O2 and H2O2 based on complex of copper(II) with the tris(3-aminopropyl)amine and imidazole ligands	C. X. CAI, K. H. XUE, X. Y. XU and Q. H. LUO
799-804	The role of iron(iii) and tartrate in the zincate immersion process for plating aluminium	S. G. ROBERTSON and I. M. RITCHIE
805-814	Development of an inverted rotating shaft-disc electrode (IRSDE)	E. J. PODLAHA, A. BO¨GLI, Ch. BONHO^TE and D. LANDOLT
815-820	Scanning probe microscopy studies of Ebonex® electrodes	J. R. SMITH, A. H. NAHLE´ and F. C. WALSH
821-830	Electropolymerization of 2-hydroxybenzothiazole (2-OHBT) in water–methanol media: electrochemical behaviour in NaCl (3%) solution	F. X. PERRIN, M. WERY and J. PAGETTI
831-838	Polymers and copolymers of pyrrole and thiophene as electrodes in lithium cells	M. I. SANCHEZ DE PINTO, H. T. MISHIMA and B. A. LO´PEZ DE MISHIMA
839-845	On texture formation of nickel electrodeposits	C. BERGENSTOF NIELSEN, A. HORSEWELL and M. J. L. ØSTERGÀRD
846-856	Analysis of capacity–rate data for lithium batteries using simplified models of the discharge process	M. DOYLE and J. NEWMAN
857-861	Electrochemical deposition of superconductor alloy precursor in a low melting molten salt medium	Y. S. FUNG and W. B. ZHANG
862-866	A novel solid state battery based on a polymer proton conductor: poly(propargyl alcohol) doped with perchloric acid	N. CAMAIONI, G. CASALBORE-MICELI, A. MARTELLI and M. J. YANG
867-869	Electropolymerization of pyrrole in aqueous solution on galvanized steel sheet	A. DE BRUYNE, J. L. DELPLANCKE and R. WINAND
870-872	Oxidative separation of nitrogen oxides from off-gases by electrochemical mediators	J. BRINGMANN, K. EBERT, U. GALLA and H. SCHMIEDER

Volume 27, Number 8 / August 1997

875-889	Electrochemical reduction of carbon dioxide on flat metallic cathodes	M. Jitaru, D. A. Lowy, M. Toma, B. C. Toma and L. Oniciu
975-981	Metallophthalocyanine catalysed electroreduction of nitrate and nitrite ions in alkaline media	N. Chebotareva and T. Nyokong
890-901	Effect of contact resistance between particles on the current distribution in a packed bed electrode	J. O'M. Bock and J. Kim
902-907	Influence of the composition of ternary mixed solvent electrolytes on the properties of rechargeable lithium cells	S.-I. Tobishima, K. Hayashi, Y. Nemoto and J.-I. Yamaki
908-915	The role of hydrogen in metal electrodeposition processes	D. R. Gabe
916-927	Mathematical modelling of industrial aluminium cells with prebaked anodes: Part I: Current distribution and anode shape	J. Zoric, I. Roušar and J. Thonstad
928-938	Mathematical modelling of aluminium cells with prebaked anodes: Part II: Current distribution and influence of sideledge	J. Zoric, I. Roušar, J. Thonstad and T. Haarberg
939-946	Current efficiency in the Hall–He´roult process for aluminium electrolysis: experimental and modelling studies	P. A. Solli, T. Eggen, E. Skybakmoen and Å. Sterten
947-952	Pyridine and its derivatives as inhibitors of aluminium corrosion in chloride solution	M. Kliškic´, J. Radoševic´ and S. Gudic´
953-958	Li1−xNaxV3O8 as positive materials for secondary lithium batteries	N. Kumagai, A. Yu and K. West
959-964	Influence of anions on the corrosion of high speed steel	C. M. A. Brett and P. I. C. Melo
965-969	Electroseparation of cobalt and nickel from a simulated wastewater	R.D. Armstrong, M. Todd, J.W. Atkinson and K. Scott
970-974	Service life of Ti/SnO2–Sb2O5 anodes	B. Correa-Lozano, Ch. Comninellis and A. De Battisti
982-990	Electrodeposition of copper from pure cupric chloride hydrochloric acid solutions	T. Kekesi and M. Isshiki
991-994	Electrodeposition of Ru/Co compositionally modulated multilayers	P. Juzikis, L. Gudavičiu¯te¯, A. Messmer and M. U. Kittel

Volume 27, Number 9 / September 1997

999-1011	Electrocatalytic oxidation of mono- and polyhydric alcohols on gold and platinum	M. BEŁTOWSKA-BRZEZINSKA, T. ŁUCZAK and R. HOLZE
1012-1020	An indirect electrochemical process for the removal of NOx from industrial waste gases	K. -H. KLEIFGES, G. KREYSA and K. JU¨TTNER
1021-1028	Multi-cathode cell with flow-through electrodes for the production of iron(ii)-triethanolamine complexes	T. BECHTOLD, E. BURTSCHER, A. TURCANU and O. BOBLETER
1029-1035	Simulations of PEFC cathodes: an effectiveness factor approach	F. GLOAGUEN and R. DURAND
1036-1044	Influence of solid phase conductivity on spatial localization of electrochemical processes in flow-through porous electrodes: Part I: Electrodes with uniform conducting matrix	A. I. MASLIY and N. P. PODDUBNY
1045-1051	Influence of solid phase conductivity on spatial localization of electrochemical processes in flow-through porous electrodes Part II: Nonuniform porous matrix with a variable conductivity profile	A. I. MASLIY and N. P. PODDUBNY
1052-1060	Electrocatalytic oxidation of methanol on platinum nanoparticles electrodeposited onto porous carbon substrates	F. GLOAGUEN, J.-M. LE´GER and C. LAMY
1061-1068	Preparation and characterization of conducting copolymer films from 5-aminoquinoline and aniline	H. A. ABD EL-RAHMAN
1069-1074	Nitric acid and sodium hydroxide generation by electrodialysis using bipolar membranes	A. T. CHERIF, J. MOLENAT and A. ELMIDAOUI
1075-1078	Inhibitory effect of amino acids on Al pitting corrosion in 0.1m NaCl	A. A. EL-SHAFEI, M. N. H. MOUSSA and A. A. EL-FAR
1079-1087	Analysis of charge rejection by an ionomeric plasma polymerized film for biomedical sensor applications	R. C. TUCKER, I. SONG, J. H. PAYER and R. E. MARCHANT
1088-1094	Zinc–cobalt alloy electrodeposition from chloride baths	R. FRATESI, G. ROVENTI, G. GIULIANI and C. R. TOMACHUK
1095-1099	Application of a three-dimensional ion-exchange electrolyte in the deoxygenation of low-conductivity water	A. TAMMINEN and K. VUORILEHTO
1100-1105	A novel preparation of gold films by electrodeposition at the interface between a Na(AuCl4)–CuSO4 aqueous phase and an immiscible hexyl acetate organic phase	T. MITSUI and H. KANEKO
1106-1110	Ionic conductivity of lithium conducting SiO2 gels at room temperature	M. WASIUCIONEK and M. W. BREITER
1111-1117	Plating fog generation in the forming of printed circuits by the additive method	S. SUGIHARA, A. IWASAWA, K. ONOSE, A. TANAKA and H. ARAI, et al.
1118-1121	Ultraviolet radiation curing of acrylates for lithium polymer electrolytes	Y. CHOI, S. K. KIM, K. H. CHANG and M. H. LEE

Volume 27, Number 10 / October 1997

1125-1134	Measurement of the redox potential of wine	J. W. TOMLINSON and P. A. KILMARTIN
1135-1142	Degradation behaviour of 6013-T6, 2024-T3 alloys and pure aluminium in different aqueous media	P. CARBONINI, T. MONETTA, D. B. MITTON, F. BELLUCCI and P. MASTRONARDI, et al.
1143-1148	Voidage of bulk solution in a tall vertical gasevolving cell	E. L. J. COENEN and L. J. J. JANSSEN
1149-1156	Influence of gas phase mass transfer limitations on molten carbonate fuel cell cathodes	E. FONTES, C. LAGERGREN, G. LINDBERGH and D. SIMONSSON
1157-1171	Computer-aided electrochemical process design: simulation and economic analysis of an electrocatalytic soybean oil hydrogenation plant	G. YUSEM and P. N. PINTAURO
1172-1178	Characterization of N,N′-dimethyl-3,4,9,10- perylenetetracarboxylic acid diimide and phthalocyaninatozinc(ii) in electrochemical photovoltaic cells	T. OEKERMANN, D. SCHLETTWEIN and D. WO¨HRLE
1179-1183	An improved electrochemical cell for the characterization of silicon/electrolyte interfaces	V. BERTAGNA, F. ROUELLE and M. CHEMLA
1184-1192	Effect of bare metal surface on the dissolution in aqueous citrate solutions of magnetite films on carbon steel	I. H. PLONSKI
1193-1197	Thermal stability of electrodeposited Ni–P alloys	J.-P. BONINO, S. BRUET-HOTELLAZ, C. BORIES, P. POUDEROUX and A. ROUSSET
1198-1206	Electrochemical characterization of Fe-Ni-P alloy electrodeposition	K. SRIDHARAN and K. SHEPPARD
1207-1211	VSe2−ySy electrodes in lithium and lithium-ion cells	R. GUZMA´N, P. LAVELA, J. MORALES and J. L. TIRADO
1212-1216	Comparison of the reduction behaviour of anodic PbO2 films on Pb-As and Pb-Bi alloys in sulfuric acid	W. -B. CAI, H. -T. LIU and W. -F. ZHOU

Volume 27, Number 11 / November 1997

1219-1231	In situ optical studies of metal deposition	I. I. SUNI
1232-1244	Reaction and system modelling for Pb and PbO2 electrodes	F. E. VARELA, E. N. CODARO and J. R. VILCHE
1245-1253	Passivation and depassivation of Monel electrodes in KF.2HF melts in comparison with the behaviour of nickel	S. Y. QIAN, H. DUMONT and B. E. CONWAY
1254-1264	Simulation of a polymer electrolyte fuel cell electrode	D. BEVERS, M. WO¨HR, K. YASUDA and K. OGURO
1265-1274	Inhibition of corrosion and hydrogen embrittlement of a HSLA steel in 0.5m H2SO4 by nitrile compounds	R. AGRAWAL and T. K. G. NAMBOODHIRI
1275-1282	Carbon monoxide electrooxidation on porous Pt–Ru electrodes in sulphuric acid	A. S. ARICO`, E. MODICA, E. PASSALACQUA, V. ANTONUCCI and P. L. ANTONUCCI
1283-1289	Evaluation of anode deactivation in chlor-alkali cells	A. S. PILLA, E. O. COBO, M. M. E. DUARTE and D. R. SALINAS
1290-1296	Some studies in the poly(ethylene oxide)–Zinc chloride system	M. J. PLANCHA, C. M. RANGEL<\snm>, C. A. C. SEQUEIRA and M. J. HUDSON
1297-1299	Absorption spectra of an electrochromic window based on molybdovanadophosphoric acid, Prussian Blue and a solid polymer electrolyte	X. Z. YOU, B. Z. SHAN, X. M. ZHANG, S. J. ZHENG and Z. P. BAI, et al.
1300-1303	Determination of the chlorine current efficiency of mercury chlor-alkali cells	C.-P. CHEN and B. V. TILAK
1304-1306	High-performance hydrogen anodes using a glass microfibre substrate	A. R. KUCERNAK, G. T. BURSTEIN, C. J. BARNETT and K. R. WILLIAMS
1307-1309	Effect of Br− on electrochemical performance of the hydrogen storage alloy MlNi3.45(CoMnTi)1.55 electrode	S. A. CHENG, Y. Q. LEI, H. LIU, Q. D. WANG and J. Q. ZHANG, et al.

Volume 27, Number 12 / December 1997

1313-1322	Flow visualization and modelling of a filter-press type electrochemical reactor	C. BENGOA, A. MONTILLET, P. LEGENTILHOMME and J. LEGRAND
1323-1327	Ruthenium dioxide films on titanium wire electrodesby spray pyrolysis: preparation and electrochemicalcharacterization	J. L. FERNA´NDEZ, M. R. GENNERO DE CHIALVO and A. C. CHIALVO
1328-1332	Effect of temperature on performanceof LaNi4.76Sn0.24 metal hydride electrode’	G. ZHENG, B. N. POPOV and R. E. WHITE
1333-1342	An integral equation approach for the analysisof current density distribution controlledby diffusion, convection and migration	Z. H. QIU, L. C. WROBEL and H. POWER
1343-1348	Critical effect of pH on the formation of organic coatings on mild steel by the aqueous electropolymerization of 2-vinylpyridine	X. LING, J. J. BYERLEY, M. D. PRITZKER and C. M. BURNS
1349-1354	Production and properties of electrolytic Ni–P–TiO2 composite layers	D. GIERLOTKA, E. RO´WINSKI, A. BUDNIOK and E. LA¸GIEWKA
1355-1361	Design of dedicated instrumentation for temperature distribution measurements in solid oxide fuel cells	M. ADZŽICĆ, M. V. HEITOR and D. SANTOS
1362-1368	Surface activation of manganese oxide electrode for oxygen evolution from seawater	K. IZUMIYA, E. AKIYAMA, H. HABAZAKI, A. KAWASHIMA and K. ASAMI, et al.
1369-1379	On unsteady electrochemical coating of a cylinder at moderately large Reynolds number	P. OLIVAS, S. ZAHRAI and F. H. BARK
1380-1384	Electrodeposition of Zn–Co alloy coatingsfrom sulfate–chloride electrolytes	I. KIRILOVA, I. IVANOV and St. RASHKOV
1385-1389	Electrodeposition of Pb–Cu alloy coatings from gluconate baths	S. S. ABD EL REHIM, N. F. MOHAMED, N. H. AMIN and L. I. ALI
1390-1393	Electroreductive aromatization of imines and diimines	A. KUNUGI, M. YASUZAWA, H. MATSUI and K. ABE
1394-1397	AgCl and Ag2S as additives to CuI in Mg–CuI seawater activated batteries	R. RENUKA

Volume 28, Number 1 / January 1998

1-9	Reduction of metal ions in dilute solutions using a GBC-reactor: Part I: Experimental study on the laboratory scale reduction of ferric ions	I. Portegies Zwart and L. J. J. Janssen
10-17	Role of mass transfer on hydrogen evolution in aqueous media	H. Riegel, J. Mitrovic and K. Stephan
18-26	Studies of platinum electroplating baths: Part V: Solutions derived from Pt(NO2)42− in aqueous acid	W. Levason, D. Pletcher, A. M. Smith and A. R. Berzins
27-35	Optimization of platinum dispersion in Pt–PEM electrodes: application to the electrooxidation of ethanol	F. Delime, J. M. Le´Ger and C. Lamy
36-40	Morphological and photoelectrochemical propertiesof porous, superimposed Au/TiO2 layers	O. Enea, B. Zaytouni and J. Moser
41-48	Intercalation of lithium in r.f.-sputtered vanadium oxide film as an electrode material for lithium-ion batteries	N. Kumagai, H. Kitamoto, M. Baba, S. Durand-Vidal and D. Devilliers, et al.
49-56	Electrochemical behaviour of chalcopyrite in the presence of silver and Sulfolobus bacteria	J. A. MuñOz, C. Go´mez, A. Ballester, M. L. Bla´zquez and F. Gonza´lez, et al.
57-64	A new method for electrochemical screening basedon the rotating ring disc electrode and its applicationto oxygen reduction catalysts	E. Claude, T. Addou, J.-M. Latour and P. Aldebert
65-70	Electrocatalytic behaviour of several cobalt complexes: Determination of hydrazine at neutral pH	G. Cepria´ and J. R. Castillo
71-79	Electrodeposition of Co–Ni alloys	E. Go´mez, J. Ramirez and E. Valle´s
80-88	Thermal effects of a laser beam on the electrodeposition of Ni–P alloys	I. Zouari, A. Bellagi and F. Lapicque
89-95	Deposition of Zn–Co by constant and pulsed current	A. StankeviČiu¯tĖ, K. Leinartas, G. BikulČius, D. VirbalytĖ and A. SudaviČius, et al.
96-102	Surface modification of Inconel-600 by growth of a hydrous oxide film	D. Marijan, M. Vukovic´, P. Pervan and M. Milun
103-106	Charge–discharge characteristics of polythiopheneas a cathode active material in a rechargeable battery	G. C´iric´-Marjanovic´ and S. Mentus
107-113	Electrochemical characteristics of the Mn(iii)/Mn(ii) and Co(iii)/Co(ii) systems at platinum in anhydrous acetic acid solutions	J. Malyszko, S. Michalkiewicz, D. Goral and M. Scendo
114-119	Electrocatalysis of oxygen evolution/reductionon LaNiO3 prepared by a novel malic acid-aided method	S. K. Tiwari, J. F. Koenig, G. Poillerat, P. Chartier and R. N. Singh
120-122	Electrocatalytic activity of LaNi4.9Si0.1–Ni/Mo composite electrodefor hydrogen evolution in alkaline solution	L. Bing and H. Wei-Kang

Volume 28, Number 2 / February 1998

127-134	Modelling of copper etching in aerated chloride solutions	M. Georgiadou and R. Alkire
135-140	Safety evaluation of rechargeable cells with lithium metal anodes and amorphous V₂O₅ cathodes	J.-I. Yamaki, S.-I. Tobishima, Y. Sakurai, K.-I. Saito and K. Hayashi
141-150	On texture formation of chromium electrodeposits	C. Bergenstof Nielsen, P. Leisner and A. Horsewell
151-160	Localized corrosion of 1024 mild steel in slightly alkaline bicarbonate solution with Cl− ions	S. Simard, H. Menard and L. Brossard
161-166	Preparation and electroactivity of polyaniline/poly(acrylic acid) film electrodes modified by platinum microparticles	L. T. Cai and H. Y. Chen
167-172	Studies of platinum electroplating baths Part VI: Influence of some experimental parameters on deposit quality	W. Jefrey Basirun and D. Pletcher
173-183	Electrodissolution of iron in sodium sulfate and sodium bicarbonate solutions at pH8	G. Vatankhah, M. Drogowska, H. Menard and L. Brossard
185-191	Application of an electrochemical pulsed flow reactor to electroorganic synthesis: Part I: Reduction of acetophenone	C. Belmant, P. Cognet, J. Berlan, G. Lacoste and P. -L. Fabre, et al.
193-199	Potential instabilities of lead silver alloy anodes in acidic sulfate electrolytes	C. Cachet, C. LE PAPE-Rerolle and R. Wiart
201-207	Electrolytic removal of lead using a flow-through cell with a reticulated vitreous carbon cathode	R. C. Widner, M. F. B. Sousa and R. Bertazzoli
209-213	Effects of electrolyte composition on the charge and discharge performances of LiNiO₂ positive electrode for lithium ion batteries	M. Morita, O. Yamada, M. Ishikawa and Y. Matsuda
215	Molecular Mechanics across Chemistry	J. Tsibouklis
215-216	Electrosintesis y Electrodialisis: Fundamentos, Aplicaciones Tecnologicas y Tendencias (in Spanish)	P. Trinidad

Volume 28, Number 3 / March 1998

223-226	Electrochemical promotion of IrO₂ catalyst activity for the gas phase combustion of ethylene	J. Nicole and CH. Comninellis
227-236	Fundamentals of electrosorption on activated carbon for wastewater treatment of industrial effluents	A. Ban, A. Schafer and H. Wendt
237-243	Modelling coupled transfers in an industrial fluorine electrolyser	H. Roustan, J. P. Caire, F. Nicolas and P. Pham
245-250	Preparation of oxygen evolving electrodes with long service life under extreme conditions	F. Cardarelli, P. Taxil, A. Savall, Ch. Comninellis and G. Manoli, et al.
251-258	Evaluation of carbon electrodes and electrosynthesis of coumestan and catecholamine derivatives in the FM01-LC electrolyser	D. Szanto, P. Trinidad and F. Walsh
259-268	A study of current distribution in a DEM cell during bromate formation	K. Scott, W. Taama and B. R. Williams
269-276	Modelling the mode of operation of PEMFC electrodes at the particle level: influence of ohmic drop within the active layer on electrode performance	Y. Bultel, P. Ozil and R. Durand
277-282	Porosity and catalyst utilization of thin layer cathodes in air operated PEM-fuel cells	A. Fischer, J. Jindra and H. Wendt
283-288	Use of effective conductivities and unit cell-based supraelements in the numerical simulation of solid oxide fuel cell stacks	H. Karoliussen, K. Nisancioglu and A. Solheim
289-297	Performance of a direct methanol fuel cell	K. Scott, W. Taama and J. Cruickshank
299-304	Anodic formation of binary and ternary compound semiconductor films for photovoltaic cells	M. I. Schimmel, O. L. Bottechia and H. Wendt
305-310	Development of a 100 W rechargeable bipolar zinc/oxygen battery	S. MU¨LLER, O. Haas, C. Schlatter and Ch. Comninellis
311-319	Dynamic modelling of gas hold-up in different electrolyte systems	H. Kellermann, K. Ju¨ttner and G. Kreysa
321-327	Water electrolysis and pressure drop behaviour in a three-dimensional electrode	V. D. Stankovic´, R. Grujic´ and A. A. Wragg
329-335	Calibration of electrodiffusion friction probes using a voltage-step transient	V. Sobolik, J. Tihon, O. Wein and K. Wichterle
337-342	Electrodiffusional flow diagnostics in a centrifugal pump	M. Lutz, V. Denk, K. Wichterle and V. Sobolik
343-349	Reduction of ferric ions in dilute solution in a semi-technical scale GBC reactor	K. N. Njau, W.-J. Van Der Knaap and L. J. J. Janssen
351-357	Optimal potential–time programming in electrochemical batch reactors	F. Fournier and M. A. Latifi
359-368	Macroscopic analysis of polarization characteristics of gas-diffusion electrodes in contact with liquid electrolytes: Part I: First order reactions	K. Sundmacher and U. Hoffmann
369-372	Effect of coating thickness on the properties of IrO₂–Ta₂O₅ anodes	J. Krysa, J. Maixner, R. Mraz and I. Rousar

Volume 28, Number 4 / April 1998

381-385	Electrochemical investigations of bare and Pd-coated LaNi_4.25Al_0.75 electrodes in alkaline solution	G. Zheng, B. N. Popov and R. E. White
387-396	A wall-jet electrode reactor and its application to the study of electrode reaction mechanisms Part III: Study of the mechanism of the a.c. electrolytic graining of aluminium in hydrochloric acid	P. Laevers, A. Hubin, H. Terryn and J. Vereecken
397-403	Electrochemical remediation of metal-bearing wastewaters Part II: Corrosion-based inhibition of copper removal by iron (iii)	T. L. Hatfield and D. T. Pierce
405-410	Characterization of corroding aluminium alloys with electrochemical noise and electrochemical impedance spectroscopy	P. R. Roberge and D. R. Lenard
411-416	An application of queuing theory to the dynamics of anodic dissolution	T. Z. Fahidy
417-422	Electrochemical dissolution of calaverite(AuTe₂) in thiourea acidic solutions	S. Aguayo Salinas, M. A. Encinas Romero and I. Gonzales
423-431	Electrochemical membranes: transport limitations for absorbed gases	L. J. Forney and C. L. Henderson
433-439	Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors	M. METIKOŠ-HUKOVIĆ, R. BABIĆ and Z. GRUBAČ
441-447	Corrosion and corrosion inhibition of nickel in HClO₄ solutions using the EQCM technique	F. Zucchi, M. Fonsati and G. Trabanelli
449-453	Electroless plating of polymers: XPS study of the initiation mechanisms	M. Charbonnier, M. Alami and M. Romand
455-459	Production of perovskite-like La_1−xCa_xMnO_3+δ ferromagnetic thin films by electrochemical reduction	T. Mercer, P. A. J. de Groot and P. N. Bartlett
461-469	Electrodeposition of copper on thermally oxidized 316 L stainless steel substrates	Z. Zhou and T. J. O'Keefe

Volume 28, Number 5 / May 1998

475-482	Application of an electrochemical pulsed flow reactor to electroorganic synthesis Part II: Oxidation of cyclohexanol and pilot plant operation	P. Roquero, P. Cognet, P. Duverneuil, G. Lacoste and P.-L. Fabre
483-489	Transmission properties for individual electrochromic layers in solid state devices based on polyaniline, Prussian Blue and tungsten oxide	B.P. Jelle, G. Hagen and Ø. Birketveit
491-501	304 Stainless steel oxidation in sulfate and sulfate+ bicarbonate solutions	M. Drogowska, L. Brossard and H. Me´nard
503-510	Copper removal during formation of corrosion resistant alkaline oxide coatings on Al–Cu–Mg alloys	R.G. Buchheit
511-516	Simultaneous determination of chlorine and oxygen evolving at RuO2/Ti and RuO2–TiO2/Ti anodes by differential electrochemical mass spectroscopy	T. Arikawa, Y. Murakami and Y. Takasu
517-524	Electrochemical behaviour of three- to nine-membered cyclic polysilanes	Z.-R. Zhang, J.Y. Becker and R. West
525-529	Gold wire bondability of electroless gold plating using disulfiteaurate complex	H. Watanabe, S. Abe and H. Honma
531-537	Discharge behaviour of copper(II) halide cathodes with molten nitrate electrolytes	C.O. Giwa
539-543	Cathodic reduction of different metal salt solutions Part I: synthesis of metal hydroxides by electrogeneration of base	G.H.ANNAL Therese and P.Vishnu Kamath
545-549	Development of a novel metal hydride–air secondary battery	S. Gamburzev, W. Zhang, O.A. Velev, S. Srinivasan and A.J. Appleby, et al.
551-557	Reduction of hexavalent chromium by polypyrrole deposited on different carbon substrates	M.A. Alatorre, S. Gutie´rrez, U. Pa´ramo and J.G. Ibanez
559-563	Electroless deposition of Ni–B, Co–B and Ni–Co–B alloys using dimethylamineborane as a reducing agent	T. Saito, E. Sato, M. Matsuoka and C. Iwakura
564	Charge Transfer in Chemical Reaction Kinetics	Roger Parsons
564-565	Electrochemical Phase Formation and Growth. An Introduction to the Initial Stages of Metal Deposition	Guy Denuault

Volume 28, Number 6 / June 1998

569-577	Process development for electrocarboxylationof 2-acetyl-6-methoxynaphthalene	A. K. Datta, P. A. Marron, C. J. H. King and J. H. Wagenknecht
579-587	The influence of fluid flow on levelling performance	Q. Chen, V. Modi and A. C. West
589-592	Effect of distortions in the ideal profile of solid phase conductivity on performance efficiency of porouselectrodes	A. I. Masliy and N. P. Poddubny
593-600	Electrooxidation of 1024 mild steel in slightlyalkaline phosphate and bicarbonate solutions	S. Simard, H. Me´nard and L. Brossard
601-606	Hydrogen activation of spectroscopic graphite surface by argon plasma etching	P. Dabo, L. Brossard, H. Me´nard and P. Tremblay
607-612	Characterization and stability of doped SnO2 anodes	F. Vicent, E. Morallo´n, C. Quijada, J.L. Va´zquez and A. Aldaz, et al.
613-616	Electrochemical reduction of dichloromethane to higher hydrocarbons	A. Kotsinaris, G. Kyriacou and CH. Lambrou
617-622	pH measurement in the vicinity of a cathode evolving hydrogen gas using an antimony microelectrode	T. Honda, K. Murase, T. Hirato and Y. Awakura
623-626	Electrochemical oxidation of p-t-butyltoluene to p-t-butylbenzaldehyde	A.S. Vaze, S.B. Sawant and V.G. Pangarkar
627-635	Electrochemical methods for the study of corrosionin lubricant additive systems	A. E. Clough
637-643	Anodic behaviour of one and two-layer coatings of Zn and Co electrodeposited from single and dual baths	I. Kirilova, I. Ivanov and St. Rashkov
645-651	Electroreduction of hexachlorobenzene in protic solvent at Hg cathodes	S. G. Merica, N. J. Bunce, W. Jedral and J. Lipkowski
653-657	Electrochemical reduction of 2-ethyl-9,10-anthraquinoneon reticulated vitreous carbon and mediated formationof hydrogen peroxide	A. Huissoud and P. Tissot

Volume 28, Number 7 / July 1998

663-672	A printed circuit board approach to measuring current distribution in a fuel cell	S. J. C. Cleghorn, C. R. Derouin, M. S. Wilson and S. Gottesfeld
673-682	Methanol-tolerant electrocatalysts for oxygen reduction in a polymer electrolyte membrane fuel cell	S. Gupta, D. Tryk, S.K. Zecevic, W. Aldred and D. Guo, et al.
683-688	A novel approach for gasification of carbon using a mixed conductor	T. Shimura, M. Itoh and H. Iwahara
689-696	Electrochemical reduction of nickel ions from diluteartificial solutions in a GBC reactor	K. N. Njau, Y. M. Hosseini and L. J. J. Janssen
697-702	Mixed convection mass transfer studies of opposing and aiding flow in a parallel plate electrochemical flow cell	C. F. Oduoza, A. A. Wragg and M. A. Patrick
703-710	In situ paired electrooxidative degradation of formaldehyde with electrogenerated hydrogen peroxide and hypochlorite ion	J-S. Do and W-C. Yeh
711-716	Electrochemical generators of pulsating or alternating current	F. D'alba, S. Di Lorenzo and C. Lucarini
717-724	Electrochemical reduction of carbon dioxide in methanol at ambient temperature and pressure	K. Ohta, M. Kawamoto, T. Mizuno and D. A. Lowy
725-735	Electrosynthèse des ions peroxodiphosphate sous potentiel constant ou pulsé	A. El Ghazali, S. Belcadi, J. J. Rameau and F. Dalard
737-743	Solution equilibrium characteristics of electroless copper deposition on thermally-activated palladium-catalysed polyimide substrates	M. Ramasubramanian, B. N. Popov, R. E. White and K. S. Chen
745-749	Anodization of n and p-GaAs in ethylene glycol–water–tartaric acid mixture	Ma. Buda, D. Cengher, D. Diaconescu and M. Buda
751-752	Book review

Volume 28, Number 8 / August 1998

757	Charles Tobias	A. A. Wragg
759-780	The rotating cylinder electrode: its continued development and application	D. R. Gabe, G. D. Wilcox, J. Gonzalez-Garcia and F. C. Walsh
781-789	Influence of electrolyte impurities on current efficiency in aluminium electrolysis cells	Å. Sterten, P. A. Solli and E. Skybakmoen
791-796	Electrodeposition of Ag from nitrate solutions: Part I. Effect of phosphate ions on morphology	A. T. Dimitrov, S. Hadzi Jordanov, K. I. Popov, M. G. Pavlovic and V. Radmilovic
797-801	Electrodeposition of silver from nitrate solution: Part II. Mechanism of the effect of phosphate ions	K. I. Popov, M. G. Pavlovic, B. N. Grgur, A. T. Dimitrov and S. Hadzi Jordanov
803-809	Study of mercury deposition from chloride solutions as test reaction for mass-transfer measurements	E.O. Cobo, J. B. Bessone and J.M. Bisang
811-817	Electrochemical reduction of nitrates and nitrites in alkaline media in the presence of hexavalent chromium	H. A. Duarte, K. Jha and J. W. Weidner
819-825	Modelling of cyclic voltammograms for two-step metal deposition on an inert electrode with adsorption	S. Martinet, J. Bouteillon and J. P. Caire
827-834	Oxygen reduction on bornite (Cu₅FeS₄) in alkaline medium	J. L. Gautier, J. Ortiz, N. Heller-Ling, G. Poillerat and P. Chartier
835-841	Oxygen evolution on electrodeposited cobalt oxides	E. B. Castro, C. A. Gervasi and J. R. Vilche
843-853	Photocatalytic degradation rate of oxalic acid on the semiconductive layer of n-TiO₂ particles in the batch mode plate reactor Part I: Mass transfer limits	J. Kulas, I. Roušar, J. Krýsa and J. Jirkovský
855-862	Optimization of bath composition for hard Fe–C alloy plating	Y. Fujiwara, M. Izaki, H. Enomoto, T. Nagayama and E. Yamauchi, et al.
863-865	A compact amperometric NO₂ sensor based on Na⁺ conductive solid electrolyte	N. Miura, M. Ono, K. Shimanoe and N. Yamazoe
867	Book review	E. J. VanderNoot

Volume 28, Number 9 / September 1998

873-880	Selective electrosynthesis of p-methoxybenzaldehyde at spinel type CoMn2O4/titanium-composite anodes	E. Lodowicks and F. Beck
881-887	CO and CO/H2 electrooxidation on carbon supported Pt–Ru catalyst in phosphotungstic acid (H3PW12O40) electrolyte	A.S. Aricò, E. Modica, I. Ferrara and V. Antonucci
889-894	Hydrogen permeation inhibition by thin layer Zn–Ni alloy electrodeposition	D.H. Coleman, B.N. Popov and R.E. White
895-898	Optimized zinc electrode for the rechargeable zinc–air battery	S. Müller, F. Holzer and O. Haas
899-905	Electrochemical impedance spectroscopic studyof dimensionally stable anode corrosion	V.A. Alves, L.A.da Silva and J.F.C. Boodts
907-913	Model of nickel electrodeposition from acidic medium	F. Lantelme, A. Seghiouer and A. Derja
915-920	Zinc electrowinning from acidic sulphate solutions Part II: Effects of triethylbenzylammonium chloride	B.C. Tripathy, S.C. Das, G.T. Hefter and P. Singh
921-928	Influence des parametres hydrodynamiques sur le transfert de matiere dans un liquide en ecoulement pulsé dans une cathode cylindrique	A. Gadri, A. Ratel and G. Lacoste
929-934	Chromium electrodeposition using a chromium(iii) glycine complex	J. McDOUGALL, M. El-Sharif and S. Ma
935-941	Effects of incorporation of Cu and Ag in Pd on electrochemical oxidation of methanol in alkaline solution	J. Prabhuram, R. Manoharan and H.N. Vasan
943-946	Polythiophene, polyaniline and polypyrrole electrodes modified by electrodeposition of Pt and Pt+Pb for formic acid electrooxidation	M.A.Del Valle, F.R. Díaz, M.E. Bodini, T. Pizarro and R. Córdova, et al.
947-954	Current efficiency for soybean oil hydrogenation in a solid polymer electrolyte reactor	W. An, J.K. Hong and P.N. Pintauro
955-962	Characterization of PTFE-bonded porous carbonelectrodes tested in a 100W phosphoric acid fuel cell(PAFC) stack using XPS and ICP–AES techniques	M. Ghouse
963-969	Investigation on copper corrosion behaviour in industrial waters by electrochemical noise analysis	C. Monticelli, G. Trabanelli and G. Mészáros
971-977	Effects of current density on adhesion of copper electrodeposits to polyimide substrates	G.A. Prentice and K.S. Chen
979-992	Determination of the oxygen reduction products on ASTM A516 steel during cathodic protection	D. Gervasio, I. Song and J.H. Payer
993-998	Differential capacitance studies of the specific adsorption of thiosulfate on silver	R. Srinivasan and I.I. Suni
999-1004	Effect of sulfate and chloride ions on the electrochemical behavior of iron in aqueous phosphate solutions	Gholamreza Vatankhah, Hugues Menard and Louis Brossard
1005-1008	Preparation of CdIn2Se4 thin films by electrodeposition	E.A. Dalchiele, S. Cattarin and M.M. Musiani
1009-1011	A high temperature amperometric NO sensor based on stabilized zirconia and CdCr2O4 electrode	G. Lu, N. Miura and N. Yamazoe
1013	Book reviews
1013-1014	Book reviews
1014	Book reviews

Volume 28, Number 10 / October 1998

1021-1033	Electrodes based on Magnéli phase titanium oxides: the properties and applications of Ebonex® materials	J. R. Smith, F. C. Walsh and R. L. Clarke
1035-1040	Dynamic behaviour of electrochemical reactors for a step change in the inlet concentration under galvanostatic or potentiostatic control	J. M. Bisang
1041-1049	PEM water electrolysers: evidence for membrane failure in 100kW demonstration plants	S. Stucki, G. G. Scherer, S. Schlagowski and E. Fischer
1051-1059	Behavior of lithiated graphite electrodes comprising silica based binder	D. Aurbach, M. D. Levi, O. Lev, J. Gun and L. Rabinovich
1061-1065	Electrochemical multilayer deposition of polyaniline and Prussian Blue and their application in solid state electrochromic windows	B. P. Jelle and G. Hagen
1067-1071	Corrosion inhibition of copper in near neutral aqueous solutions by gamma-pyrodiphenone	G. Petkova, E. Sokolova, S. Raicheva and P. Ivanov
1073-1081	Thermo-electrochemical reduction of sulfate to sulfide using a graphite cathode	B. A. Bilal and H. Tributsch
1083-1086	Electrolyte for copper deposition based on aqueous polyaniline dispersion	N. Tabakova, N. Petkova and J. Stejskal
1087-1093	Iron(III) tetramethoxyphenylporphyrin(FeTMPP) as methanol tolerant electrocatalyst for oxygen reduction in direct methanol fuel cells	G. Q. Sun, J. T. Wang and R. F. Savinell
1095-1099	Crystallographic textures and magnetic properties of electroformed nickel	K. C. Chan, N. S. Qu and D. Zhu
1101-1106	Electrooxidation of ethylene glycol on Pt-based catalysts dispersed in polyaniline	A. Kelaidopoulou, E. Abelidou, A. Papoutsis, E. K. Polychroniadis and G. Kokkinidis
1107-1112	Effect of brighteners on hydrogen evolution during zinc electroplating from zincate electrolytes	M. Monev, L. Mirkova, I. Krastev, Hr. Tsvetkova and St. Rashkov, et al.
1113-1120	Characterization of zinc–nickel alloys obtained from an industrial chloride bath	G. Barceló, E. García, M. Sarret, C. Müller and J. Pregonas
1121-1125	Reduction of nitrogen monoxide to nitrogen at gas diffusion electrodes with noble metal catalysts	M. Shibata, K. Murase and N. Furuya
1127-1136	Electrogenerative formation of ferric ions in a sulfur dioxide–sulfuric acid solution; Graphite catalysed sulfur dioxide oxidation	E. García, G. R. Dieckmann and S. H. Langer
1137-1140	Anodic oxidation of p-methoxytoluene in acetic acid on graphite	G. Falgayrac and A. Savall
1141-1145	Bubble coverage and bubble resistance using cells with horizontal electrode	K. Qian, Z. D. Chen and J. J. J. Chen
1147-1151	Electrosynthesis attempts of tetrahydridoborates	E. L. Gyenge and C. W. Oloman

Volume 28, Number 11 / November 1998

1157-1166	A model for Kolbe electrolysis in a parallel plate reactor	M. T. Hicks and P. S. Fedkiw
1167-1177	Electrochemical incineration of benzoquinone in aqueous media using a quaternary metal oxide electrode in the absence of a soluble supporting electrolyte	L. L. Houk, S. K. Johnson, J. Feng, R. S. Houk and D. C. Johnson
1179-1188	Electrochemical processing of porosity gradients for the production of functionally graded materials	A. Neubrand
1189-1193	Electroadsorption of Ni2+ ions in an electrodialysis chamber containing granulated ion-exchange resin	N. A. Linkov, J. J. Smit, V. M. Linkov and V. D. Grebenyuk
1195-1203	Influence of Co2+ ions on cathode behaviour during zinc electrowinning	T. Dobrev, C. Cachet and R. Wiart
1205-1211	Effect of dissolved chromium species on the corrosionof stainless steel in nitric acid	R. D. Armstrong, G. E. Cleland and G. O. H. Whillock
1213-1219	Influence of the forming electrolyte on the electrical properties of tantalum and niobium oxide films: an EIS comparative study	G. E. Cavigliasso, M. J. Esplandiu and V. A. Macagno
1221-1225	Storage characteristics of mercury-free alkaline manganese batteries	M. Yano, S. Fujitani, K. Nishio, Y. Akai and M. Kurimura
1227-1233	Reactivity and codeposition of Co3O4 powderswith nickel in a Watts bath	J.-P. Bonino, S. Loubiere and A. Rousset
1235-1241	A cyclic voltammetric study of the kinetics andmechanism of electrodeposition of manganese dioxide	Shalini Rodrigues, A. K. Shukla and N. Munichandraiah
1243-1250	Direct cathodic reduction of Leuco Sulfur Black 1 and Sulfur Black 1	T. Bechtold, E. Burtscher and A. Turcanu
1251-1260	Rotating cylinder Hull cell study of anomalous codeposition of binary iron-group alloys	N. Zech, E. J. Podlaha and D. Landolt
1261-1264	Electrochemical oxidation of 2-methylnaphthalene-1,4-diacetate	J. Kowalski, J. Płoszyńska and A. Sobkowiak
1265-1268	Content of sodium and lithium in aluminium during electrolysis of cryolite-based melts	V. Danielik, P. Fellner and J. Thonstad
1269-1275	A H2O2 biosensor based on immobilization of horseradish peroxidase in electropolymerized methylene green film on GCE	R. Yang, C. Ruan and J. Deng
1277-1281	Evaluation of thin defect-free epoxy coatings using electrochemical impedance spectroscopy	S-Y. Zhang, W-F. Zhou, X-W. Luo and S-J. Li

Volume 28, Number 12 / December 1998

1287	Editorial
1289	Foreword
1291-1297	Cathodic behaviour of RuO2-doped Ni/Co3O4 electrodes in alkaline solutions: hydrogen evolution	N. Krstajic and S. Trasatti
1299-1304	Plastic power sources	G. B. Appetecchi, S. Panero, E. Spila and B. Scrosati
1305-1311	Recent advances in the electromotive force method for determining transference numbers of electrolytes and characterizing new salt bridges	P. R. Mussini and T. Mussini
1313-1319	The ‘memory effect’ on nickel oxide electrodes:electrochemical and mechanical aspects	G. Davolio and E. Soragni
1321-1331	Cathodic protection and cathodic preventionin concrete: principles and applications	L. Bertolini, F. Bolzoni, P. Pedeferri, L. Lazzari and T. Pastore
1333-1341	Influence of the exposure of AISI 304L stainless steel at moderately high temperature on the susceptibility to crevice corrosion	S. P. Trasatti, E. Camona, F. Mazza and E. Sivieri
1343-1349	Theoretical limiting prediction of H2S removal efficiency from coal gasification streams using an intermediate temperature electrochemical separation process	J. S. Robinson and J. Winnick
1351-1357	Electrochemical behaviour of iron and copper in a culture solution for Spirulina platensis	R. Malgor, G. Heijo, L. Romero and C. F. Zinola
1359-1363	Anodic behaviour of composition modulated Zn–Co multilayers electrodeposited from single and dual baths	I. Kirilova, I. Ivanov and St. Rashkov
1365-1369	Electrochemical evaluation of LiCoO2 synthesized by decomposition and intercalation of hydroxides for lithium-ion battery applications	B. Huang, Y-I. Jang, Y-M. Chiang and D. R. Sadoway
1371-1375	Features of electrochemical noise generated during pitting of inhibited A516-70 carbon steel in chloride solutions	Y. F. Cheng, B. R. Rairdan and J. L. Luo
1377-1382	Cyclic voltammetric studies of pasted nickel hydroxide electrode microencapsulated by cobalt	X. Y. Wang, J. Yan, Y. S. Zhang, H. T. Yuan and D. Y. Song
1383-1388	Influence of sulphide ions on the cathodic behaviour of copper in 0.1 M borax solution	M. Vázquez and S. R. De Sanchez
1389-1397	Material aspects of the liquid feed direct methanol fuel cell	K. Scott, W. M. Taama and P. Argyropoulos
1399-1403	Electrochemical studies of kerosene-pyrolysedcarbon films	Maheshwar Sharon, Mukul Kumar, Padmakar D. Kichambare and Michael Neumann-Spallart
1405-1411	Electrochemical synthesis of cupric oxide powder Part I: Influence of pH	Z. D. Stanković, M. Rajčić-Vujasinović, M. Vuković, S. Krčobić and A. A. Wragg
1413-1418	Electrochemical behaviour of a hydrogen/oxygen gas mixture at a solid polymer electrolyte interface	S-Y. Cha, J-M. Song and W-M. Lee
1419-1428	Steady-state mass transfer between two opposite discs and a liquid in radial divergent flow	E. Bezerra Cavalcanti and F. Coeuret
1429-1432	News

Volume 29, Number 1 / January 1999

1-6	Influence of silver on electrochemical and corrosion behaviours of Pb–Ca–Sn–Al grid alloys Part I: Potentiodynamic and potentiostatic studies	S. Zhong, J. Wang, H. K. Liu, S. X. Dou and M. Skyllas-Kazacos
7-10	Indirect oxidation of o-chlorotoluene to o- chlorobenzaldehyde	A. S. Vaze, S. B. Sawant and V. G. Pangarkar
11-16	Electrochemical reduction of 2-ethyl-9,10-anthraquinone (EAQ) and mediated formation of hydrogen peroxide in a two-phase medium Part I: Electrochemical behaviour of EAQ on a vitreous carbon rotating disc electrode (RDE) in the two-phase medium	A. Huissoud and P. Tissot
17-25	Electrochemical reduction of 2-ethyl-9,10-anthraquinone (EAQ) and mediated formation of hydrogen peroxide in a two-phase medium Part II: Production of alkaline hydrogen peroxide by the intermediate electroreduction of EAQ in a flow-by porous electrode in two-phase liquid–liquid flow	A. Huissoud and P. Tissot
27-34	Turbulent free convection in large electrochemical cells with a binary electrolyte	F. Gurniki, F. H. Bark and S. Zahrai
35-42	Ternary and quaternary mixed electrolytes for lithium cells	S-I. Tobishima, K. Hayashi, Y. Nemoto, S. Sugihara and J-I. Yamaki
43-50	Corrosion rates and negative difference effects for Al and some Al alloys	D. M. Dražić and J. P. Popić
51-57	Influence of structural parameters on the properties of electrolytic Ni–Mn–S deposits	N. Atanassov and H. W. Schils
59-63	Nanoparticles produced by borohydride reduction as precursors for metal hydride electrodes	M. Mitov, A. Popov and I. Dragieva
65-73	Electrochemical behaviour of indium ions in molten equimolar CaCl2–NaCl mixture at 550 ∘C	Y. Castrillejo, M. R. Bermejo, A. M. Martínez, C. Abejón and S. Sánchez, et al.
75-80	Electrochemical evaluation of molybdenum nitride electrodes in H2SO4 electrolyte	S. L. Roberson, D. Finello and R. F. Davis
81-85	Electrochemical synthesis of cupric oxide powder Part II: Process conditions	Z. D. Stanković, M. Rajčić-vujasinović, M. Vuković, S. Krčobić and A. A. Wragg
87-92	The electrochemical reduction of nitrate in acidic nitrate solutions	O. W. J. S. Rutten, A. Van Sandwijk and G. Van Weert
93-100	Planar oxygen sensor Part I: Effect of crazing of a zirconia thick film on an alumina substrate	J. Gopaul, W. C. Maskell and K. E. Pitt
101-107	Electrooxidation of β-D(+)glucose on bare and u.p.d. modified platinum particles dispersed in polyaniline	A. Kelaidopoulou, A. Papoutsis, G. Kokkinidis, W. T. Napporn and J.-M. Leger, et al.
109-116	A binary mixture of dyes (2-imidazolin-5-oneand Rose Bengal) for photosensitization of n-ZnO thin film electrodes in aqueous and acetonitrile media	L. Bahadur and L. Roy
117-122	Atmospheric corrosion inhibitors for copperin the electronics industry	E. Stupnišek-lisac, V. Cinotti and D. Reichenbach
123-128	Inhibiting effect of citric acid on the pitting corrosion of tin	C. M. V. B. Almeida, T. Rabóczkay and B. F. Giannetti
129-132	A 5 W liquid-feed solid-polymer-electrolyte direct methanol fuel cell stack with stainless steel	A. K. Shukla, M. K. Ravikumar, M. Neergat and K. S. Gandhi
133-136	Calendar

Volume 29, Number 2 / February 1999

137-145	The anode effect as a fluid dynamic problem	H. Vogt
147-151	On the performance of Ti/SnO2 and Ti/PbO2 anodesin electrochemical degradation of 2-chlorophenolfor wastewater treatment	A. M. Polcaro, S. Palmas, F. Renoldi and M. Mascia
153-163	Structure investigations of SOFC anode cermets Part I: Porosity investigations	J. Divisek, R. Wilkenhöner and Y. Volfkovich
165-170	Structure investigations of SOFC anode cermets Part II: Electrochemical and mass transport properties	J. Divisek, R. Jung and I. C. Vinke
171-176	Modelling of phosphoric acid fuel cell cathode behaviour	G. Maggio
177-183	Influence of silver on electrochemical and corrosion behaviours of Pb–Ca–Sn–Al grid alloys Part II: A.c. impedance and scanning electron microscopy studies	S. Zhong, J. Wang, H. K. Liu, S. X. Dou and M. Skyllas-Kazacos
185-190	Surface shear stress for a submerged jet impingement using electrochemical technique	S. Yapici, S. Kuslu, C. Ozmetin, H. Ersahan and T. Pekdemir
191-200	Kinetics and mechanism of MnO2 dissolution in H2SO4 in the presence of pyrite	B. B. Nayak, K. G. Mishra and R. K. Paramguru
201-207	Effect of nitrite anions on the rate of iron dissolution in acid electrolytes	A. I. Marshakov and V. E. Ignatenko
209-219	Quantitative phase analysis of galvannealed coatings by coulometric stripping	C. Xhoffer, H. Dillen, B. C. De Cooman and A. Hubin
221-227	Electrochemical reduction of ethylpicolinate: Competitive aspects of pyridine nucleus hydrogenation and ester reduction	A. M. Romulus and A. Savall
229-238	Characterization of porous aluminium oxide films from a.c. impedance measurements	J. A. González, V. López, A. Bautista, E. Otero and X. R. Nóvoa
239-244	Corrosion of cyanide copper deposits on zinc diecastings in acid solutions	T. F. Otero and J. L. Rodríguez-jiménez
245-251	Electrodeposition of indium and zinc on aluminium	S. B. Saidman, A. G. Muñoz and J. B. Bessone
253-258	Electrochemical activation of the catalytic effect of cobalt in autoxidation of toluene in acetic acid	G. Falgayrac and A. Savall
259-263	Appraisal of the polypyrrole/cataphoretic paint bilayer system as a protective coating for metals	C. A. Ferreira, S. Aeiyach, A. Coulaud and P. C. Lacaze
265-270	Electrosynthesis of p-hydroxybenzaldehydefrom sodium p-hydroxymandelate	J. A. Gomis, V. García-garcía, J. González-garcía, V. Montiel and A. Aldaz
271-272	Aromatic disulfides as additives to CuI in Mg–CuI seawater activated batteries	R. Renuka
273-276	Calender

Volume 29, Number 3 / March 1999

277-283	Electrochemical degradation of phenol in aqueous solution on bismuth doped lead dioxide: a comparison of the activities of various electrode formulations	N. Belhadj Tahar and A. Savall
285-292	Effect of trace additives on the efficiencyof peroxydisulfate regeneration	G. B. Balazs, J. F. Cooper and T. E. Shell
293-299	Nickel ferrite as inert anodes in aluminium electrolysis: Part I Material fabrication and preliminary testing	E. Olsen and J. Thonstad
301-311	Nickel ferrite as inert anodes in aluminium electrolysis: Part II Material performance and long-term testing	E. Olsen and J. Thonstad
313-319	Electrodeposition of PbO2 and Bi–PbO2 on Ebonex	A. H. Ras and J. F. van Staden
321-330	Tool design in electrochemical machining considering the effect of thermal-fluid properties	C. S. Chang, L. W. Hourng and C. T. Chung
331-338	Electrochemical deposition of zinc–polystyrene composites in the presence of surfactants	A. Hovestad, R. J. C. H. L. Heesen and L. J. J. Janssen
339-346	Characterization of the efficiency of antiscale treatments of water. Part II: Physical processes	A. Khalil, R. Rosset, C. Gabrielli, M. Keddam and H. Perrot
347-353	Corrosion and corrosion inhibition of nickel in HClO4 solutions using the EQCM technique	F. Zucchi, M. Fonsati and G. Trabanelli
355-360	Stabilized bismuth oxide–noble metal mixed conducting composites as high temperature oxygen separation membranes	C. S. Chen and A. J. Burggraaf
361-369	Studies on metal hydride electrodes with different weights and binder contents	G. Zheng, B. S. Haran, B. N. Popov and R. E. White
371-382	Oxidation by electrogenerated mediator: influence of perfluorosulfonic separator on process performance	S. Logette, C. Eysseric, P. Huguet, C. Gavach and G. Pourcelly
383-392	Impedance measurements on lacquered tinplate: fitting with equivalent circuits	G. G. do Nascimento, O. R. Mattos, J. L. C dos Santos and I. C. P. Margarit
393-402	Effect of chloride concentration range on the corrosion resistance of Cu–xNi alloys	I. Milošev and M. Metikoš-huković
403	Book Review	Antonio Aldaz
405-408	Calender

Volume 29, Number 4 / April 1999

411-419	Electrochemical reduction of chromate ions from dilute artificial solutions in a GBC-reactor	K. N. Njau and L. J. J. Janssen
421-428	Test cells for the investigation of battery reactions at high internal pressures	L. Binder, V. K. Nartey, M. Ghaemi, P. Urdl and W. Jantscher
429-435	Photocatalytic degradation rate of oxalic acid on a semiconductive layer of n-TiO2 particles in a batch mode plate photoreactor Part II: Light intensity limit	J. Krýsa, L. Vodehnal and J. Jirkovský
437-444	An adsorption strength model for the electrochemical codeposition of α-Al2O3 particles and a Fe–P alloy	D. L. Wang, J. Li, Ch. S. Dai and X. G. Hu
445-448	Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs	F. Lufrano, E. Passalacqua, G. Squadrito, A. Patti and L. Giorgi
449-454	Factors governing the electrochemical synthesis of α-nickel (ii) hydroxide	R. S. Jayashree and P. Vishnu Kamath
455-462	Electrochemical assessment of calcium carbonate deposition using a rotating disc electrode (RDE)	A. Neville, T. Hodgkiess and A. P. Morizot
463-471	Electrochemical impedance studies of a decade-aged magnesium/manganese dioxide primary cell	N. Munichandraiah
473-480	Electrochemical behaviour of Al, Al–Sn, Al–Zn and Al–Zn–Sn alloys in chloride solutions containing indium ions	H. A. El Shayeb, F. M. Abd El Wahab and S. Zein El Abedin
481-487	Influence of surface chemical structure of active carbon on its electrochemical behaviour in the presence of silver	S. Biniak, M. Pakula and A. ŚWIATKOWSKI
489-496	Synthesis of poly(N,N,N-trimethyl–N-2-methacryloxyethyl) ammonium chloride initiated by anodically generated Sn2+ cation	T.-Y. Lin and T.-C. Chou
497-503	Electrochemical reduction of trivalent uranium ions in molten chlorides	K. Serrano and P. Taxil
505-510	Electrochemical nucleation of uranium in molten chlorides	K. Serrano and P. Taxil
511-520	The feasibility of using a rechargeable MnO2 cathode with a metal hydride anode	Deyang Qu
521-524	Graphite as anode material for the electrochemical production of polysulfide ions in white liquor	M. Behm and D. Simonsson
525-528	Sulfate solubility algorithms for CaSO4–NaCl–H2O and Na2SO4–NaCl–H2O in chlor alkali brine at 25, 65, 75 and 85 ∘C	R. L. Dotson, H. L. Loftis and H. B. Cochran
529-533	Calendar

Volume 29, Number 5 / May 1999

533-539	An integrated flow reactor-membrane filtration system for heterogeneous photocatalysis. Part I: Experiments and modelling of a batch-recirculated photoreactor	K. Sopajaree, S. A. Qasim, S. Basak and K. Rajeshwar
541-550	Study of sacrificial anode cathodic protection of buried tanks: Numerical modelling	D. Rabiot, F. Dalard, J.-J. Rameau, J.-P. Caire and S. Boyer
551-560	Comparative study of nanocrystalline Ti2RuFe and Ti2RuFeO2 electrocatalysts for hydrogen evolution in long-term chlorate electrolysis conditions	L. Roué, É. Irissou, A. Bercier, S. Bouaricha and M. Blouin, et al.
561-568	Reaction of CO/CO2 gas mixtures on Ni–YSZ cermet electrodes	P. Holtappels, L. G. J. De Haart, U. Stimming, I. C. Vinke and M. Mogensen
569-576	Electrochemical production of ferrate(vi) using sinusoidal alternating current superimposed on direct current. Pure iron electrode	K. Bouzek, L. Flower, I. Roušar and A. A. Wragg
577-584	A statistical analysis of the electrodeposition of nickel in the presence of a magnetic field	J. C. Shannon, Z. H. Gu and T. Z. Fahidy
585-591	Influence of thiourea on the nucleation of copper on polycrystalline platinum	A. Tarallo and L. Heerman
593-599	4-Aminoantipyrine as an inhibitor of mild steel corrosion in HCl solution	S. S. Abd El-Rehim, Magdy A. M. Ibrahim and K. F. Khaled
601-609	Role of indium ions on the activation of aluminium	H. A. El Shayeb, F. M. Abd El Wahab and S. Zein El Abedin
611-617	Electrochemical removal of nitrate ions in waste solutions after regeneration of ion exchange columns	M. Paidar, I. Roušar and K. Bouzek
619-626	Inhibition of phosphoric acid corrosion of zinc by organic onium compounds and their adsorption characteristics	M. S. Morad
627-635	Large specific surface area nanocrystalline Ti–Ru–Fe cathode materials for sodium chlorate	H. Razafitrimo, M. Blouin, L. Roué, D. Guay and J. Huot, et al.
637-645	Microstructural characterization and corrosion resistance of Ni–Zn–P alloys electrolessly deposited from a sulphate bath	M. Bouanani, F. Cherkaoui, R. Fratesi, G. Roventi and G. Barucca
647-654	Behaviour of molybdate-passivated zinc coated steel exposed to corrosive chloride environments	G. M. Treacy, G. D. Wilcox and M. O. W. Richardson
655-659	Calendar

Volume 29, Number 6 / June 1999

663-671	Gas evolution and power performance in direct methanol fuel cells	P. Argyropoulos, K. Scott and W.M. Taama
673-678	Effect of carbon-supported and unsupported Pt–Ru anodes on the performance of solid-polymer-electrolyte direct methanol fuel cells	A.S. Aricò, A.K. Shukla, K.M. El-Khatib, P. Cretì and V. Antonucci
679-685	Effect of crosslinking on the physicochemical properties of proton conducting PVDF-g-PSSA membranes	T. Lehtinen, G. Sundholm and F. Sundholm
687-695	An investigation into the electrodeposition of Au–Cu-matrix particulate composites	B. Bozzini, G. Giovannelli and P.L. Cavallotti
697-706	Oxidation–reduction processes in halide and oxohalide niobium containing melts. Part I: Interaction of fluoride–chloride and oxofluoride–chloride Nb(V) melts with niobium oxides	V.V. Grinevitch, V.A. REZNICHENKO, M.S. Model, S.A. Kuznetsov and E.G. Polyakov, et al.
707-721	Time-dependent polarization behaviour of pipeline grade steel in low ionic strength environments	S.L. Carson and M.E. Orazem
723-731	Influence of Zn2+ ions on copper electrowinning from sulfate electrolytes	L. Muresan, A. Nicoara, S. Varvara and G. Maurin
733-743	Zinc barrel electroplating using low cyanide electrolytes	M. Wery, J.C. Catonné, V. Ligier and J. Pagetti
745-749	Construction and characterization of a rotating cylinder electrode for different technological applications	J.M. Maciel and S.M.L. Agostinho
751-756	Electrochemical activation of the electroless deposition of Ni–P alloy and phase structure characterization of the deposit. Part I: Dual bath system	R. Stevanović, J. Stevanović and A. Despić
757-761	A solid-state electrochromic device based on complementary polypyrrole/polythiophene derivatives and an elastomeric electrolyte	W.A. Gazotti, M.-A. De Paoli, G. Casalbore-Miceli, A. Geri and G. Zotti
763-768	Synthesis and characterization of a composite of polyaniline and carbon black	R. Del Río, J.H. Zagal, G.de T. Andrade and S.R. Biaggio
769-775	Anodically deposited manganese-molybdenum oxide anodes with high selectivity for evolving oxygen in electrolysis of seawater	K. Fujimura, K. Izumiya, A. Kawashima, E. Akiyama and H. Habazaki, et al.
777-781	Calendar

Volume 29, Number 7 / July 1999

779-788	Effect of alumina concentration on the incipience of the anode effect in aluminium electrolysis	H. Vogt
789-796	Cycling performance and safety of rechargeable lithium cells with binary and ternary mixed solvent electrolytes	S.-I. Tobishima, K. Hayashi, Y. Nemoto and J.-I. Yamaki
797-802	Plant substances as battery cathodes: Zinc–embelin organic secondary battery	D. Kalaiselvi and R. Renuka
803-810	Electrodeposition of Co + Ni alloys on modified silicon substrates	E. Gómez and E. Vallés
811-818	Influence of Co2+ and Mn2+ ions on the kinetics of lead anodes for zinc electrowinning	C. Cachet, C. Le Pape-rérolle and R. Wiart
819-826	Voltammetric and coulometric techniques to estimate the electrochemical reaction rate during ohmic sterilization	T. Tzedakis, R. Basseguy and M. Comtat
827-834	Mass transfer and current efficiency for the electrodeposition of silver in fluorosilicic acid solution	J.-S. Do and A.-S. Her
835-841	Hydrogen evolution, incorporation and removal in electroless nickel composite coatings on aluminium	I. Apachitei and J. Duszczyk
843-852	Changes in cold sealed aluminium oxide films during ageing	J.A. González, S. Feliu, A. Bautista and E. Otero
853-858	Physical and electrochemical characteristics of aluminium-substituted nickel hydroxide	B. Liu, X.Y. Wang, H.T. Yuan, Y.S. Zhang and D.Y. Song, et al.
859-866	Electrochemical water disinfection Part I: Hypochlorite production from very dilute chloride solutions	A. Kraft, M. Stadelmann, M. Blaschke, D. Kreysig and B. Sandt, et al.
867-879	Influence of initial surface condition of lithium metal anodes on surface modification with HF	S. Shiraishi, K. Kanamura and Z-I. Takehara
881-886	Porous platinum electrodes derived from the reduction of sputtered platinum dioxide films	L. Maya, G.M. Brown and T. Thundat
887-891	News

Volume 29, Number 8 / August 1999

895-902	Electrochemical water disinfection. Part II: Hypochlorite production from potable water, chlorine consumption and the problem of calcareous deposits	A. Kraft, M. Blaschke, D. Kreysig, B. Sandt and F. Schröder, et al.
903-911	A water-activated cuprous bromide battery	K. Vuorilehto and H. Rajantie
911-918	Corrosion inhibition of steel by thiourea and cations under incomplete cathodic protection in a 3.5% NaCl solution and seawater	J.-C. Lin, S.-L. Chang and S.-L. Lee
919-926	Cyclone flow cell for the investigation of gas-diffusion electrodes	K. Sundmacher
927-937	Zn and Zn–Sn alloy coatings with and without chromate layers. Part I: Corrosion resistance and structural analysis	L. SZIRÁKI, Á. CZIRÁKI, Z. VÉRTESY, L. KISS and V. IVANOVA, et al.
939-949	Niobium plating processes in alkali chloride melts	B. Gillesberg, J.H. Von Barner, N.J. Bjerrum and F. Lantelme
951-960	High energy ball-milled Pt and Pt–Ru catalysts for polymer electrolyte fuel cells and their tolerance to CO	M.C. Denis, G. Lalande, D. Guay, J.P. Dodelet and R. Schulz
961-970	Electrolytic oxidation of trichloroethylene using a ceramic anode	G. Chen, E.A. Betterton and R.G. Arnold
971-977	Nonisothermal electrochemical cell for monitoring hydrogen or oxygen in high temperature water	D.R. Morris, Fang Jiang, J.M. McINERNEY and D.H. Lister
979-986	Evaluation of the surface roughness of microporous Ni–Zn–P electrodes by in situ methods	R. Karimi Shervedani and A. Lasia
987-994	Study of pyrite oxidation by cyclic voltammetric, impedance spectroscopic and potential step techniques	H.K. Lin and W.C. Say
995-1003	Surface treatment for zinc corrosion protection by a new organic chelating reagent	S. Manov, F. Noli, A.M. Lamazouere and L. Aries
1005-1013	Cyclic potential sweep electrolysis for formation of poly(2-vinylpyridine) coatings	X. Ling, M.D. Pritzker, C.M. Burns and J.J. Byerley
1015-1017	Effect of Fe(CN)63− \| ITO interfacial cathodic current on the efficiency of the photoelectrochemical n−PbO \| Fe(CN)63−/4− \| ITO cell	Maheshwar Sharon and S. Ghosh
1019-1024	Calendar

Volume 29, Number 9 / September 1999

1025-1033	Modelling of mass transfer within the PEM fuel cell active layer: limitations at the particle level	Y. Bultel, P. Ozil and R. Durand
1035-1044	Electrodeposition of zinc–nickel alloys from ammonia-containing baths	I. Rodriguez-Torres, G. Valentin and F. Lapicque
1045-1051	Structure and thermal stability of zinc–nickel electrodeposits	C. Bories, J-P. Bonino and A. Rousset
1053-1061	Anodic dissolution of aluminium in organic electrolytes containing perfluoroalkylsulfonyl imides	L. PÉTER and J. Arai
1063-1071	Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al–Zn	D.R. Salinas, S.G. García and J.B. Bessone
1073-1078	3,5-bis(n-Hydroxyphenyl)-4-amino-1,2,4-triazoles and 3,5-bis(n-aminophenyl)-4-amino-1,2,4-triazoles: a new class of corrosion inhibitors for mild steel in 1m HCl medium	F. Bentiss, M. Lagrenee, M. Traisnel, B. Mernari and H. Elattari
1079-1084	High temperature electrochemical heat pump using water gas shift reaction. Part I: Theoretical considerations	A. Ishihara, N. Motohira, K. Ota and N. Kamiya
1085-1094	Kinetics and mechanism of the preparation of Raney® copper	A.J. Smith, T. Tran and M.S. Wainwright
1095-1102	Evaluation of methods to increase the oxygen partial pressure in PEM fuel cells	C. Boyer, S. Gamburzev and A.J. Appleby
1103-1110	Correlation between light absorption and electric charge in solid state electrochromic windows	B.P. Jelle and G. Hagen
1111-1118	An integrated flow reactor-membrane filtration system for heterogeneous photocatalysis. Part II: Experiments on the ultrafiltration unit and combined operation	K. Sopajaree, S.A. Qasim, S. Basak and K. Rajeshwar
1119-1123	Zinc dissolution in ammonium chloride electrolytes	A.B. Velichenko, J. Portillo, M. Sarret and C. Muller
1125-1128	An application of the Pollaczek–Khintchine theorem of queuing theory to the dynamics of anodic dissolution	T.Z. Fahidy
1129-1132	The use of a porous ceramic diaphragm for the removal of metallic impurities from chromium plating baths	S.L. Guddati, T.M. Holsen, C.-C. Li, J.R. Selman and N.V. Mandich
1133-1137	Corrosion behaviour of Zn–Co compositionally modulated multilayers electrodeposited from single and dual baths	I. Kirilova and I. Ivanov
1139	Jürgen O. Besenhard, Handbook of Battery Materials. Wiley-Vch (1999), ISBN 3-527-29469-4, 618 pages £210	Frank Walsh
1139-1140	Milan Paunovic and Mordechay Schlesinger, Fundamentals of Electrochemical Deposition. John Wiley & Sons: New York (1998). 301 pages £45–	G.D. Wilcox
1141-1145	Calendar

Volume 29, Number 10 / October 1999

1147-1153	Dynamic behaviour of electrochemical reactors for a step change in flow rate	J.M. Bisang
1155-1159	Instability of the two-phase flow in vertical interelectrode gaps	H. Vogt
1161-1170	Anodic oxidation of sulphite ions on graphite anodes in alkaline solution	J. Lu, D.B. Dreisinger and W.C. Cooper
1171-1176	Ni–Zn–P alloy deposition from sulfate bath: inhibitory effect of zinc	M. Bouanani, F. Cherkaoui, M. Cherkaoui, S. Belcadi and R. Fratesi, et al.
1177-1183	Effect of nonaqueous anodic oxidation on the intensity of photoluminescence of porous silicon	M. Shimura, M. Katsuma, T. Chikuma and T. Okumura
1185-1190	Oxidation of CO on hydrogen-loaded palladium	O. YÉPEZ and B.R. Scharifker
1191-1196	Effect of purification of 2-methyltetrahydrofuran/ethylene carbonate mixed solvent electrolytes on cyclability of lithium metal anodes for rechargeable cells	M. Arakawa, S. Tobishima, T. Hirai and J. Yamaki
1197-1203	Effect of preparation conditions on the structure and catalytic activity of carbon-supported platinum for the electrooxidation of methanol	A. Stoyanova, V. Naidenov, K. Petrov, I. Nikolov and T. Vitanov, et al.
1205-1210	Effect of oxide ion donors on the corrosion and dechromization of stainless steels in KCl–NaCl–BaCl2 melt	H.A. Abd El-Rahman, A. Baraka and S.A. Abd El-Gwad
1211-1216	Nickel electrowinning using a Pt catalysed hydrogen-diffusion anode. Part II: Batch tank with a sulphate bath	J. Rambla, E. Brillas and J. Casado
1217-1227	Copper nucleation on titanium for thin film applications	A.J.B. Dutra and T.J. O'keefe
1229-1235	Zinc electrowinning from acidic sulphate solutions. Part III: Effects of quaternary ammonium bromides	B.C. Tripathy, S.C. Das, P. Singh and G.T. Hefter
1237-1240	Calculation of the current efficiency of the electrolytic sodium chlorate cells	B.V. Tilak and C.-P. Chen
1241-1244	Voltammetric study of Al–Zn–Mg alloys in chloride solutions	J.A. Garrido, P.L. Cabot, R.M. Rodriguez, E. Perez and A.H. Moreira, et al.
1245-1248	Calendar

Volume 29, Number 11 / November 1999

1249-1254	Enhancement of the electrooxidation of ethanol on a Pt–PEM electrode modified by tin. Part I: Half cell study	F. Delime, J-M. Léger and C. Lamy
1255-1261	Electrocatalytic oxidation of methanol and formic acid on dispersed electrodes: Pt, Pt–Sn and Pt/M(upd) in poly(2-hydroxy-3-aminophenazine)	A. Kelaidopoulou, E. Abelidou and G. Kokkinidis
1263-1275	An electric model of a vapour anode, multitube alkali–metal thermal-to-electric converter	J.-M. Tournier and M.S. El-Genk
1277-1284	Overall mass transfer in the swirling flow induced by a tangential inlet between coaxial cones	M.N. Noui-Mehidi, A. Salem, P. Legentilhomme and J. Legrand
1285-1289	Fabrication and evaluation of 1 Ah silver/metal hydride cells	S. Rodrigues, N. Munichandraiah and A.K. Shukla
1291-1296	Transient and turbulent mass transfer in rotating shallow electrochemical cells	F.-B. Weng, Z. Cheng, Y. Kamotani and S. Ostrach
1297-1304	Electrodeposition of Zn and In onto vitreous carbon	A.G. MUÑOZ, S.B. Saidman and J.B. Bessone
1305-1315	Evaluation of porous cathodes for the electrochemical reduction of nitrates and nitrites in alkaline waste streams	K. Jha and J.W. Weidner
1317-1322	New passivating pastes for stainless steel without nitric acid	G. Capobianco, G. Faccin, A. Gambirasi, G. Moretti and G. Quartarone, et al.
1323-1327	Characteristics of La0.65Nd0.2Pr0.15Ni3.55Co 0.75Mn0.4Al0.3 electrode for nickel metal hydride batteries	H.M. Jin, G.X. Li, R.K. Wang, C.H. Zhou and P. Wu
1329-1338	Zirconium and Ebonex® as cathodes for sulphite ion oxidation in sulphuric acid	K. Scott, H. Cheng and W. Taama
1339-1345	Investigation of copper corrosion inhibition by STM and EQCM techniques	E. Szocs, Gy. Vastag, A. Shaban, G. Konczos and E. Kálmán
1347-1350	Catalysis of oxygen evolution on IrOx/Pb anodes in acidic sulfate electrolytes for zinc electrowinning	C. Le Pape-RÉrolle, M.A. Petit and R. Wiart
1351-1354	Spinel-type oxides LiMn2−xMxO4 [M=Co, Fe, (CoFe)] as electrocatalyst for oxygen evolution/reduction in alkaline solution	N. Li, X. Yan, Y. Jin, S. Li and B. Lin
1357-1358	Calendar

Volume 29, Number 12 / December 1999

1359-1366	The effect of ultrasonic frequency and intensity upon electrode kinetic parameters for the Ag(S2O3)23−/Ag redox couple	B. Pollet, J.P. Lorimer, S.S. Phull, T.J. Mason and D.J. Walton, et al.
1367-1376	Nickel electrowinning using a Pt catalysed hydrogen-diffusion anode. Part I: Effect of chloride and sulfate ions and a magnetic field	E. Brillas, J. Rambla and J. Casado
1377-1381	Electrochemical pitting behaviour of type 321 stainless steel in sulfide-containing chloride solutions	Y.M. Liou, S.Y. Chiu, C.L. Lee and H.C. Shih
1383-1391	Mass transfer between a liquid and an array of discs in a cylindrical container. Part I: Pumped flow or rotation alone	E. Bezerra Cavalcanti and F. Cœuret
1393-1400	A parallel plate flow cell for the investigation of the role of surfactants in the codeposition of polymer particles in nickel electroplating	C. Filiatre, L. Towarnicki, F. Mange and A. Foissy
1401-1407	Performance of zinc molybdenum phosphate in anticorrosive paints by accelerated and electrochemical tests	B. Del Amo, R. Romagnoli and V.F. Vetere
1409-1416	Modelling of performance of PEM fuel cells with conventional and interdigitated flow fields	A. Kazim, H.T. Liu and P. Forges
1417-1421	Performance improvement of a MH/MnO2 rechargeable battery	Z. Guo and X. Xia
1423-1426	Electrochemical study on orthorhombic LiMnO2 as cathode in rechargeablelithium batteries	G.X. Wang, P. Yao, S. Zhong, D.H. Bradhurst and S.X. Dou, et al.
1427-1438	Role of surface defects in the electrocatalytic behaviour of copper in base	L.D. Burke and J.A. Collins
1439-1448	Behaviour of Nafion® 350 membrane in sodium sulfate electrochemical splitting: continuous process modelling and pilot scale tests	M. Rakib, Ph. Moçotéguy, Ph. Viers, E. Petit and G. Durand
1449-1455	An empirical equation for polymer electrolyte fuel cell (PEFC) behaviour	G. Squadrito, G. Maggio, E. Passalacqua, F. Lufrano and A. Patti
1457-1461	Capacitance of a solid sulfonated epoxy resin-coated electrode	J. Chen, K. Aoki, T. Totsuka and T. Utsunomiya
1463-1469	Investigations of ruthenium pyrochlores as bifunctional oxygen electrodes	J. Prakash, D.A. Tryk, W. Aldred and E.B. Yeager
1471-1473	Electrodeposition of doped solid films of phosphomolybdates	K.K. Kasem
1475-1479	Analysis of the presence of different contaminants on the copper electrodeposits morphology obtained from cement copper acid solutions	R. Gana, M. Figueroa, L. Kattan, D. Grandoso and M.A. Esteso
1481	Book Review
1483-1486	Calendar
1487-1490	Instructions for Authors
1491-1493	Author Index of Volume 29
1495-1498	Index to Volume 29 (1999)

Volume 30, Number 1 / January 2000

1-12	Copper deposition on micropatterned electrodes from an industrial acid copper plating bath	S. Goldbach, B. Van den Bossche, T. Daenen, J. Deconinck and F. Lapicque
13-19	Durability testing for the recovery of sodium hydroxide from alkaline waste solutions	J.D. Genders, D. Chai and D.T. Hobbs
21-28	Benzotriazole as inhibitor for copper with and without corrosion products in aqueous polyethylene glycol	E. Guilminot, J-J. Rameau, F. Dalard, C. Degrigny and X. Hiron
29-34	Impedance spectroscopic study for the initiation of passive film on carbon electrodes in lithium ion batteries	C.R. Yang, J.Y. Song, Y.Y. Wang and C.C. Wan
35-41	Impedance spectroscopy study of electrochromism in sputtered iridium oxide films	Th. Pauporté and R. Durand
43-48	Performance evaluation of porous electrocatalysts via normalization of the active surface	J.P. Iúdice de Souza, T. Iwasita, F.C. Nart and W. Vielstich
49-53	Electrochemical preparation and properties of composite films with polypyrrole/poly(styrene sulfonate): polyviologen multilayers	H. Kim and M. Pyo
55-60	Surface microstructure and corrosion resistance of electrodeposited ternary Zn–Ni–Co alloy	M.M. Younan
61-70	Removal of Zn(II) from chloride medium using a porous electrode: current penetration within the cathode	M.R.V. Lanza and R. Bertazzoli
71-75	Electrochemically prepared acrylamide/N,N′-methylene bisacrylamide gels	G. Yildiz, H. Çatalgil-Giz and F. Kadirgan
77-83	Changes in positive lead/acid battery plates during charge/discharge cycling	R. De Marco and J. Jones
85-93	Dynamic simulation of a parallel-plate electrochemical fluorination reactor	K. Jha, G.L. Bauer and J.W. Weidner
95-100	Electrochemical behaviour of titanium in fluoride-containing saliva	M. Fernández Lorenzo de Mele and M.C. Cortizo
101-105	Bipolar plate materials for solid polymer fuel cells	D.P. Davies, P.L. Adcock, M. Turpin and S.J. Rowen
107-111	Preparation and characterization of microporous Ni coatings as hydrogen evolving cathodes	I.J. Brown and S. Sotiropoulos
113-116	Characteristics of a mercury substituent inhibitor in alkaline manganese dioxide/zinc batteries	J.M. Wang, Y.D. Qian, J.Q. Zhang and C.N. Cao
117-120	Electrodeposition studies in the MnO2 + PbO2 system: formation of Pb3Mn7O15	E.A. Dalchiele, S. Cattarin, M. Musiani, U. Casellato and P. Guerriero
121-124	Electrode/matrix interfacial characteristics in a phosphoric acid fuel cell	K.H. Yoon, J.Y. Choi, J.H. Jang, Y.S. Cho and K.H. Jo
125-129	Calendar

Volume 30, Number 2 / February 2000

135-146	Three-dimensional numerical simulation of straight channel PEM fuel cells	S. Dutta, S. Shimpalee and J.W. Van Zee
147-151	Pt/Ti electrode preparation methods: application to the electrooxidation of isopropanol	G. Fóti, C. Mousty, K. Novy, Ch. Comninellis and V. Reid
153-157	Electrode materials for intermediate temperature proton-conducting fuel cells	S.W. Tao, Q.Y. Wu, D.K. Peng and G.Y. Meng
159-163	Synthesis of ternary Li–Mn–O phase at a temperature of 260 ∘C and electrochemical lithium insertion into the oxide	N. Kumagai, T. Saito and S. Komaba
165-172	Barrel zinc electrodeposition from alkaline solution	M. Wery, J.C. Catonné and J.Y. Hihn
173-179	Normal and anomalous codeposition of Zn–Ni alloys from chloride bath	G. Roventi, R. Fratesi, R.A. Della Guardia and G. Barucca
181-186	Sulphurous acid as anodic depolarizer in copper electrowinning Part II	T. Subbaiah, P. Singh, G. Hefter, D. Muir and R.P. Das
187-192	Electrosynthesis of hydrogen peroxide by partial reduction of oxygen in alkaline media. Part II: Wall-jet ring disc electrode for electroreduction of dissolved oxygen on graphite and glassy carbon	P. Ilea, S. Dorneanu and I.C. Popescu
193-200	Electrochemical reduction of NO and O2 on Cu/CuO	K. Kammer Hansen, H. Christensen, E.M. Skou and S.V. Skaarup
201-207	Electrochemical processes for nuclear fuel reprocessing	H. Schmieder and U. Galla
209-216	Study of mixing in an axisymmetric coflowing liquid jet by coupling L.D.A. to an electrochemical method	S. Benayad, A. Salem and J. Legrand
217-229	An electrochemical study of gold cementation with zinc powder at low cyanide concentration in alkaline solutions	S. Vilchis-Carbajal, I. González and G.T. Lapidus
231-238	Effects of chloride, bromide and iodide ions on internal stress in films deposited during high speed nickel electroplating from a nickel sulfamate bath	Y. Tsuru, M. Nomura and F.R. Foulkes
239-246	Pulse electrodeposition of titanium on carbon steel in the LiF–NaF–KF eutectic melt	A. Robin and R.B. Ribeiro
247-257	Durability and thermal cycling of Ni/YSZ cermet anodes for solid oxide fuel cells	S. Primdahl and M. Mogensen
259-262	Desalting of phenylalanine solutions by electrodialysis with ion-exchange membranes	H. Grib, D. Belhocine, H. Lounici, A. Pauss and N. Mameri
263-267	Calendar

Volume 30, Number 3 / March 2000

269-275	Mass transport in lithium-battery solvents	Mark W. Verbrugge, Brian J. Koch and Eric W. Schneider
277-284	Electrodeposition of Ni–Co alloys from sulfamate baths	S. Goldbach, R. de Kermadec and F. Lapicque
285-291	Modelling the capacitance of d.c. etched aluminium electrolytic capacitor foil	D. G. W. Goad and H. Uchi
293-302	Characterization of doped tin dioxide anodes prepared by a sol–gel technique and their application in an SPE-reactor	J.H. Grimm, D.G. Bessarabov, U. Simon and R.D. Sanderson
303-313	Mass transfer between a liquid and an array of discs in a cylindrical container. Part II: Combined pumped flow and rotation	E. Bezerra Cavalcanti and F. Cœuret
315-322	Electrowinning of tellurium from alkaline leach liquor of cemented Te	Y.-C. Ha, H.-J. Sohn, G.-J. Jeong, C.K. Lee and K.-I. Rhee
323-331	Hydrogen fired PAFCs: an experimental investigation into the optimal utilization of impure, recycled hydrogen	J. Scholta, B. Rohland and H. Wendt
333-337	Electrochemical properties of composite anodes for cathodic protection	K. Darowicki, S. Janicki and J. Orlikowski
339-345	Anodic polarization behaviour of cast iron alloys in deaerated concentrated H3PO4 solutions containing Cl− and F− ions	M.S. Abdel-Aal and A.A. Hermas
347-357	Effect of morphology on the performance of metal-hydride electrodes	K.M. Shaju, V. Ganesh Kumar, S. Rodrigues, N. Munichandraiah and A.K. Shukla
359-364	Comparison of platinum with IrO2–Ta2O5 system for the stannous ion consumption in methane sulfonic acid baths with and without catechol	T. Kunihiro, M. Morimitsu and M. Matsunaga
365-370	Analysis of PEM fuel cell stacks using an empirical current–voltage equation	D. Chu, R. Jiang and C. Walker
371-377	AC impedance and state-of-charge analysis of alkaline zinc/manganese dioxide primary cells	S. Rodrigues, N. Munichandraiah and A.K. Shukla
379-384	The effect of benzotriazole on mass transfer in the corrosion of a copper rotating disk electrode	J.L. Guiñón, J. García-Antón and V. Pérez-Herranz
385-392	Preparation of Bi1−xSbx films by electrodeposition	F. Besse, C. Boulanger and J.M. Lecuire
393-398	Calendar

Volume 30, Number 4 / April 2000

399-404	Electrochemical treatment of waste solutions containing ferrous sulfate by anodic oxidation using an undivided reactor	J.M. Bisang
405-410	Safety and capacity retention of lithium ion cells after long periods of storage	S. Tobishima, J. Yamaki and T. Hirai
411-418	Durability test of SOFC cathodes	M.J. Jørgensen, P. Holtappels and C.C. Appel
419-427	Texture prediction of Bi2Te3 electroplated layers using Hartman's theory of crystal growth	H. Chaouni, J. Bessières, A. Modaressi and J.J. Heizmann
429-437	Electrochemical investigation of the codeposition of SiC and SiO2 particles with nickel	P. Nowak, R.P. Socha, M. Kaisheva, J. Fransaer and J.-P. Celis, et al.
439-445	Separation of nickel from cobalt using electrodialysis in the presence of EDTA	A.J. Chaudhary, J.D. Donaldson, S.M. Grimes and N.G. Yasri
447-455	Theoretical analysis of chronoamperometric transients in electrochemical machining and characterization of titanium 6/4 and inconel 718 alloys	A.R. Mount, K.L. Eley and D. Clifton
457-466	Effects of air agitation on conductivity in acid copper electrodeposition solutions	M. Ward, C.J. Roberts and D.R. Gabe
467-474	Electrochemical behaviour of olefins: oxidation at ruthenium–titanium dioxide and iridium–titanium dioxide coated electrodes	C.L.P.S. Zanta, A.R. de Andrade and J.F.C. Boodts
475-482	An ecologically effective water treatment technique using electrochemically generated hydroxyl radicals for in situ destruction of organic pollutants: Application to herbicide 2,4-D	M.A. Oturan
483-490	2-Nitrophenylpyruvic acid as a cathode material in a magnesium/zinc-based primary battery	R. Renuka
491-498	Effect of oxygen and titanium contents on the stability of nanocrystalline Ti–Ru–Fe–O cathode materials for chlorate electrolysis	L. Roué, M.-E. Bonneau, D. Guay, M. Blouin and R. Schulz
499-506	Hydrogen evolving activity on nickel–molybdenum deposits using experimental strategies	C.-C. Hu and C.-Y. Weng
507-509	Effective solution resistivity in beds containing one monolayer or multilayers of uniform spherical glass beads	L.J.J. Janssen
511-514	Polarization behaviour and lifetime of IrO2–Ta2O5–SnO2/Ti anodes in p-phenolsulfonic acid solutions for tin plating	M. Morimitsu, H. Tamura, M. Matsunaga and R. Otogawa
515	Book reviews
515-516	Book reviews
517-522	Calendar

Volume 30, Number 5 / May 2000

523-532	A study of the deactivation and service life of Ir oxide anodes supported on Al substrates	C. Bock, H. Spinney and B. MacDougall
533-541	Electrochemical preparation and surface properties of gold nanowire arrays formed by the template technique	P. Forrer, F. Schlottig, H. Siegenthaler and M. Textor
543-549	Electrochemical oxidation of benzene at a glassy carbon electrode	K.-W. Kim, M. Kuppuswamy and R.F. Savinell
551-559	Steady-state operation of a compressor for a proton exchange membrane fuel cell system	D. Thirumalai and R.E. White
561-570	Electrochemical investigation of the adsorption behaviour of anhydrides and imides on iron in acid medium	E. Lazarova, S. Kalcheva, G. Neykov, T. Yankova and N. Stoyanov
571-574	Electrodeposition of cohesive carbon films on aluminum in a LiCl–KCl–K2CO3 melt	H. Kawamura and Y. Ito
575-584	Prediction of electrode shape change involving convection, diffusion and migration by the boundary element method	Z.H. Qiu and H. Power
585-590	Negative plate discharge in lead acid batteries. Part I: General analysis, utilization and energetic coefficients	C.V. D'Alkaine, A. Carubelli and M.C. Lopes
591-594	An investigation into the electrodeposition of AuCu-matrix particulate composites. Part II: Baths not containing free cyanide	B. Bozzini, G. Giovannelli and P.L. Cavallotti
595-600	Cleaning of copper foil coated with sodium hexanoate as corrosion inhibitor	N. Bellakhal, K. Draou, A. Addou and J.L. Brisset
601-606	Electrodeposition and dissolution of Co–W alloy films	C.L. Aravinda, V.S. Muralidharan and S.M. Mayanna
607-615	Application of EIS to the initial stages of atmospheric zinc corrosion	S.C. Chung, S.L. Sung, C.C. Hsien and H.C. Shih
617-624	Copper corrosion at various pH values with and without the inhibitor	M. Metikoš-Huković, R. Babić and I. Paić
625-634	Faradaic impedance investigation of the deactivation mechanism of Ir-based ceramic oxides containing TiO2 and SnO2	T.A.F. Lassali, J.F.C. Boodts and L.O.S. Bulhões
635-640	Calendar

Volume 30, Number 6 / June 2000

641-646	Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure	L.R. Jordan, A.K. Shukla, T. Behrsing, N.R. Avery and B.C. Muddle, et al.
647-656	Regeneration of zinc particles for zinc–air fuel cells in a spouted-bed electrode	V. Jiricny, S. Siu, A. Roy and J.W. Evans
657-664	Electrochemical properties of a new V2O5 xerogel	S. Mège, Y. Levieux, F. Ansart, J.M. Savariault and A. Rousset
665-673	Impedance spectroscopy and modelling of zinc deposition in chloride electrolyte containing a commercial additive	F. Ganne, C. Cachet, G. Maurin, R. Wiart and E. Chauveau, et al.
675-683	Electrochemical behaviour of aluminium in the presence of EDTA-containing chloride solutions	G.M. Treacy, A.L. Rudd and C.B. Breslin
685-691	Destruction of aniline by mediated electrochemical oxidation with Ce(IV) and Co(III) as mediators	Y.H. Chung and S.-M. Park
693-704	Electrochemical behaviour of cobalt in aqueous solutions of different pH	W.A. Badawy, F.M. Al-Kharafi and J.R. Al-Ajmi
705-710	Tungsten carbide-based electrochemical sensors for hydrogen determination in gas mixtures	V. Nikolova, I. Nikolov, P. Andreev, V. Najdenov and T. Vitanov
711-716	Nucleation effects on structural and optical properties of electrodeposited zinc oxide on tin oxide	B. Canava and D. Lincot
717-722	Effect of heat treatment on the anodic oxidation of Ti–0.2 Pd alloys in chloride solutions	P.L. Cabot, A. Forn, M. Vilarrasa, J.A. Picas and F.J. Gil, et al.
723-725	Stabilization of platinized carbon catalysts for PAFC	Z.D. Wei, S.T. Zhang, Z.Y. Tang and H.T. Guo
727-731	Biomass conversion: attempted electrooxidation of lignin for vanillin production	P. Parpot, A.P. Bettencourt, A.M. Carvalho and E.M. Belgsir
733-736	Cathodic reduction of 4-nitroso-N,N-dimethylaniline at various electrode materials	K. Polat, M.L. Aksu and A.T. Pekel
737-743	3-Mercaptopropyltrimethoxysilane as a Cu corrosion inhibitor in KCl solution	R. Tremont, H. De Jesús-Cardona, J. García-Orozco, R.J. Castro and C.R. Cabrera
745-751	Dithiobiurets: a novel class of acid corrosion inhibitors for mild steel	M.A. Quraishi, J. Rawat and M. Ajmal
753-756	Characterization of capacitive humidity sensors based on doped poly(propargyl-alcohol)	M.J. Yang, G. Casalbore-Miceli, N. Camaioni, C.M. Mari and H. Sun, et al.
757-760	Mediated reduction of oxygen at poly(phenosafranine) modified electrodes	V. Ganesan and R. Ramaraj
761-766	Calendar

Volume 30, Number 7 / July 2000

767-775	An experimental investigation of bubble-induced free convection in a small electrochemical cell	P. Boissonneau and P. Byrne
777-786	Design equations for optimized PEM fuel cell electrodes	C.C. Boyer, R.G. Anthony and A.J. Appleby
787-794	On gas bubbles in industrial aluminium cells with prebaked anodes and their influence on the current distribution	J. Zoric and A. Solheim
795-801	Effect of particle size on the electrocatalytic activity of platinum dispersions in carbon matrix electrodes for phosphoric acid fuel cells	S.-B. Lee and S.-I. Pyun
803-807	A new technique for two-dimensional current distribution measurements in electrochemical cells	Ch. Wieser, A. Helmbold and E. Gülzow
809-816	A new technique for the visualization of the concentration boundary layer in an electrodialysis cell	V. Pérez-Herranz, J.L. Guiñón and J. García-Antón
817-822	Role of polyethylene glycol in electrodeposition of zinc–chromium alloys	T. Akiyama, S. Kobayashi, J. Ki, T. Ohgai and H. Fukushima
823-830	Aqueous extract of Rosmarinus officinalis L. as inhibitor of Al–Mg alloy corrosion in chloride solution	M. Kliškić, J. Radošević, S. Gudić and V. Katalinić
831-838	Some aspects of removal of copper and cobalt from mixed ion dilute solutions	A.S. Pilla, M.M.E. Duarte and C.E. Mayer
839-844	RRDE study of oxygen reduction on Pt nanoparticles inside Nafion®: H2O2 production in PEMFC cathode conditions	O. Antoine and R. Durand
845-853	Zinc impregnation of the anodic oxidation layer of 1050 and 2024 aluminium alloys	J-P. Dasquet, J-P. Bonino, D. Caillard and R.S. Bes
855-858	Observation of photocurrent generation in electrodeposited zinc oxide layers	J. Katayama and M. Izaki
859-864	Exhaustive oxidation/reduction of nitrite, nitrate and hydrazine using a square wave potential regime	M. Hourani and B. Waleed
865-874	Studies on the influence of chloride ion and pH on the corrosion and electrochemical behaviour of AZ91D magnesium alloy	R. Ambat, N.N. Aung and W. Zhou
875-883	Wet electrolytic oxidation of organic pollutants in wastewater treatment	R.M. Serikawa, M. Isaka, Q. Su, T. Usui and T. Nishimura, et al.
885-890	Calendar

Volume 30, Number 8 / August 2000

891-897	Reduction of hexavalent chromium by copper	S. Goeringer, N.R. de Tacconi, C.R. Chenthamarakshan and K. Rajeshwar
899-913	Hydrodynamic modelling of direct methanol liquid feed fuel cell stacks	P. Argyropoulos, K. Scott and W.M. Taama
915-924	Electrochemical cleaning of microporous metallic filters fouled with bovine serum albumin and phosphate under low cross-flow velocities	R.D. Webster, S.V.V. Chilukuri, J.A. Levesley and B.J. Webster
925-928	Alkali and earth alkaline metal contents in the aluminium cathode in aluminium electrolysis	P. Fellner, V. Danielik and J. Thonstad
929-937	Corrosion protection of steel in molten Li2CO3–K2CO3 and Na2CO3–K2CO3 mixtures in a hydrogen-containing atmosphere	I.M. Petrushina, L. Qingfeng, F. Borup and N.J. Bjerrum
939-944	Electrochemical hydrogen evolution on polypyrrole from alkaline solutions	Mahmoud M. Saleh
945-951	Electrosynthesis of conducting polymer films from the azo dye methoxy red	H. H. Rehan
953-958	Photoelectrochemical degradation of lignin	R. Pelegrini, J. Reyes, N. Durán, P.P. Zamora and A.R. de Andrade
959-966	Study of different triazole derivative inhibitors to protect copper against pitting corrosion	W. Qafsaoui, Ch. Blanc, N. Pébère, A. Srhiri and G. Mankowski
967-972	Electrochemical reduction of derivatives and isomers of ethylpicolinate	A.M. Romulus and A. Savall
973-979	Inhibition of CuNi10Fe corrosion in seawater by sodium-diethyl-dithiocarbamate: an electrochemical and analytical study	LJ. Aljinović, S. Gudić and M. Šmith
981-985	Use of a rotating cylinder electrode in corrosion studies of a 90/10 Cu–Ni alloy in 0.5 mol L−1 H2SO4 media	J.M. Maciel and S.M.L. Agostinho
987-994	Effect of tartrate on the morphological characteristics of the copper–tin electrodeposits from a noncyanide acid bath	I.A. Carlos, C.A.C. Souza, E.M.J.A. Pallone, R.H.P. Francisco and V. Cardoso, et al.
995-998	Electrosynthesis of dehydrocholic acid from cholic acid	F. Bonfatti, A. de Battisti, S. Ferro, A. Medici and P. Pedrini
999-1004	Calendar

Volume 30, Number 9 / September 2000

1005-1014	Two-dimensional numerical modelling of a direct methanol fuel cell	A.A. Kulikovsky
1015-1021	On modelling molten carbonate fuel-cell cathodes by electrochemical potentials	J.D. Fehribach, J.A. Prins-Jansen, K. Hemmes, J.H.W. De Wit and F.W. Call
1023-1031	Simulation of influences of layer thicknesses in an alkaline fuel cell	J.-H. Jo, S.-K. Moon and S.-C. Yi
1033-1041	Photocatalytic degradation of oxalic acid on a semiconductive layer of n-TiO2 particles in a batch plate reactor. Part III: Rate determining steps and nonsteady diffusion model for oxygen transport	J. Krýsa, K. Bouzek and Ch. Stollberg
1043-1051	Hypochlorite generation on Ru–Pt binary oxide for treatment of dye wastewater	C.-H. Yang, C.-C. Lee and T.-C. Wen
1053-1060	A mathematical model for the internal cathodic protection of cylindrical structures by wire anodes	S. Martinez and I. Štern
1061-1067	Cathodes for chlorate electrolysis with nanocrystalline Ti–Ru–Fe–O catalyst	A. Gebert, M. Lacroix, O. Savadogo and R. Schulz
1069-1079	Dynamic aspects of the electroreduction of chromic acid solutions	E. Soragni, C. Fontanesi, G. Barani and V. Ganzerli
1081-1085	Preparation and electrochemical characterization of LiCoO2 by the emulsion drying method	S.-T. Myung, N. Kumagai, S. Komaba and H.-T. Chung
1087-1090	On the determination of limiting current density from uncertain data	C. Ponce-de-León and R.W. Field
1091-1095	Calendar

Volume 30, Number 10 / October 2000

1097-1102	Effect of chromate additive on the kinetics and mechanism of skeletal copper formation	A.J. Smith, L. Ma, T. Tran and M.S. Wainwright
1103-1108	Kinetics and mechanism of the formation of doped skeletal copper catalysts: the effect of zincate compared to undoped and chromate-doped systems	A.J. Smith, T. Tran and M.S. Wainwright
1109-1117	Electrochemical synthesis of Cr(II) at carbon electrodes in acidic aqueous solutions	Q. Yin, N.P. Brandon and G.H. Kelsall
1119-1124	Electrochemical and thermal behaviour of LiNi0.8Co0.2O2 cathode in sealed 18650 Li-ion cells	W. Lu, C.W. Lee, R. Venkatachalapathy and J. Prakash
1125-1132	Evaluation of nickel deposition by electrochemical impedance spectroscopy	M. Holm and T.J. O'Keefe
1133-1136	Induced effect of Mn3O4 on formation of MnO2 crystals favourable to catalysis of oxygen reduction	Z.D. Wei, W.Z. Huang, S.T. Zhang and J. Tan
1137-1142	A novel electrocatalytic polyaniline electrode for methanol oxidation	A.M. Castro Luna
1143-1150	Preparation on iron of a polypyrrole (PPy) electrode modified with copper by the electrochemical cementation process	L. Makhloufi, H. Hammache, B. Saidani, N. Akilal and Y. Maloum
1151-1155	Platinum–tin alloy electrodes for direct methanol fuel cells	M.A. Abdel Rahim, M.W. Khalil and H.B. Hassan
1157-1161	Electrocatalysis of oxygen evolution at stainless steel anodes by electrosynthesized cobalt hydroxide coatings	M. Dinamani and P. Vishnu Kamath
1163-1168	Diffusion coefficients of Cu(II) complexes with ligands used in alkaline electroless copper plating solutions	E. Norkus
1169-1172	An interpretation of the Zech–Podlaha–Landolt model of metal codeposition via queuing theory	T.Z. Fahidy
1173-1177	Substitutional inhibition mechanism of mild steel hydrochloric acid corrosion by hexylamine and dodecylamine	J.M. Bastidas, J.L. Polo and E. Cano
1179-1182	Preparation of Li–Mn–O thin films by r.f.-sputtering method and its application to rechargeable batteries	S. Komaba, N. Kumagai, M. Baba, F. Miura and N. Fujita, et al.
1183-1186	Relationship between apparent electrical-conductivity and preparation conditions for nickel foam	P.S. Liu, H. Chen, K.M. Liang, S.R. Gu and Q. Yu, et al.
1187	Donald A. McQuarrie and John D. Simon, Molecular Thermodynamics.	Ray Meadowcroft
1189	R.W. Revie, Uhlig's Corrosion Handbook 2nd edition.	Frank C. Walsh
1191	P.K. Datta and J.S. Burnell-Gray, Advances in Surface Engineering (Volumes I, II and III).	Frank Walsh
1193-1196	Calendar

Volume 30, Number 11 / November 2000

1199-1207	Water splitting at ion-exchange membranes and potential differences in soil during electrodialytic soil remediation	L.M. Ottosen, H.K. Hansen and C.B. Hansen
1209-1222	A SERS spectroelectrochemical investigation of the interaction of 2-mercaptobenzothiazole with copper, silver and gold surfaces	R. Woods, G.A. Hope and K. Watling
1223-1228	Electrochemical promotion of Rh catalyst in gas-phase reduction of NO by propylene	G. Fóti, O. Lavanchy and C. Comninellis
1229-1233	Effect of sodium iodide additive on the electrochemical performance of sodium/nickel chloride cells	Jai Prakash, Laszlo Redey, Donald R. Vissers and James DeGruson
1235-1241	Application of a hydrogen reference electrode to a solid state water removal device	S. Yamauchi, K. Mitsuda, H. Maeda and O. Takai
1243-1253	Improvement of the high energy ball-milling preparation procedure of CO tolerant Pt and Ru containing catalysts for polymer electrolyte fuel cells	M.C. Denis, P. Gouérec, D. Guay, J.P. Dodelet and G. Lalande, et al.
1255-1259	Competitive role of inhibitive and aggressive ions in the corrosion of steel in concrete	S. Muralidharan, V. Saraswathy, K. Thangavel and S. Srinivasan
1261-1268	Electrocrystallization and electrodeposition of silver on titanium nitride	H. Cesiulis and M. Ziomek-Moroz
1269-1276	Mass transfer behaviour of a flow-by fixed bed electrochemical reactor composed of a vertical stack of screens under single and upward two phase flow	A.A. Mobarak, M.S.E. Abdo, M.S.M. Hassan and G.H. Sedahmed
1277-1283	In situ controlled electrochemical promotion of catalyst surfaces: Pd-catalysed ethylene oxidation	K. Yiokari and S. Bebelis
1285-1292	Mass transfer in fluidized beds of inert particles. Part I: The role of collision currents in mass transfer to the electrode	N.A. Shvab, N.V. Stefanjak, K.A. Kazdobin and A.A. Wragg
1293-1298	Mass transfer in fluidized beds of inert particles Part II: Effect of particle size and density	N.A. Shvab, N.V. Stefanjak, K.A. Kazdobin and A.A. Wragg
1299-1302	Electrosynthesis of dimethylsulfone from dimethylsulfoxide at a dimensionally stable anode	D. Vasudevan, S.S. Vaghela and G. Ramachandraiah
1303-1311	Electrochemical and XPS investigations of cobalt in KOH solutions	K.M. Ismail and W.A. Badawy
1313-1316	Magnetic properties of electrodeposited nickel–manganese alloys: Effect of Ni/Mn bath ratio	A. Stephen, M.V. Ananth, V. Ravichandran and B.R.V. Narashiman
1317-1320	Calendar

Volume 30, Number 12 / December 2000

1321-1333	Impact of chlorine and acidification in the electrochemical treatment of tumours	E. Nilsson, J. Berendson and E. Fontes
1335-1343	LES of turbulent channel flow of a binary electrolyte	F. Gurniki, K. Fukagata, S. Zahrai and F.H. Bark
1345-1350	Oxidation of carboxylic acids at boron-doped diamond electrodes for wastewater treatment	D. Gandini, E. Mahé, P.A. Michaud, W. Haenni and A. Perret, et al.
1351-1360	Determination of diffusion coefficients of depositing ions in molten chlorides by transient electrochemical techniques	T. Støre, G.M. Haarberg and R. Tunold
1361-1367	A primary, secondary and pseudo-tertiary mathematical model of a chlor-alkali membrane cell	P. Byrne, P. Bosander, O. Parhammar and E. Fontes
1369-1376	Concentration and potential distributions in the active layer of proton exchange membrane fuel cell electrodes	Y. Bultel, P. Ozil and R. Durand
1377-1387	Mathematical model of the PEMFC	K. Dannenberg, P. Ekdunge and G. Lindbergh
1389-1395	Electrochemical oxidation of carbon in a 62/38 mol % Li/K carbonate melt	W.H.A. Peelen, M. Olivry, S.F. Au, J.D. Fehribach and K. Hemmes
1397-1404	Effect of molten carbonate composition on oxygen reduction under pressurized conditions: cyclic voltammetry and equivalent circuit analysis	M. Mohamedi, Y. Hisamitsu, Y. Ono, T. Itoh and I. Uchida
1405-1413	Study of cerium species in molten Li2CO3–Na2CO3 in the conditions used in molten carbonate fuel cells. Part I: Thermodynamic, chemical and surface properties	V. Chauvaut, V. Albin, H. Schneider, M. Cassir and H. Ardéléan, et al.
1415-1420	Study of cerium species in molten Li2CO3–Na2CO3 in the conditions used in molten carbonate fuel cells. Part II: Potentiometric and voltammetric behaviour	M. Cassir, V. Chauvaut, A. Alfarra and V. Albin
1421-1431	TiCN and metallic coatings for corrosion protection of separator plates in MCFCs	M. Keijzer, K. Hemmes, J.H.W. De Wit and J. Schoonman
1433-1437	Electrical conductivity and chemical diffusivity of NiAl2O4 spinel under internal reforming fuel cell conditions	L. Kou and J.R. Selman
1439-1444	Effects of baffle length on mass transfer in a parallel plate rectangular electrochemical cell	C.F. Oduoza and A.A. Wragg
1445-1448	Calendar

Volume 31, Number 1 / January 2001

1-11	Modelling electrochemical impedance data for semi-bipolar lead acid batteries	H. Andersson, I. Petersson and E. Ahlberg
13-24	An investigation of scale-up on the response of the direct methanol fuel cell under variable load conditions	P. Argyropoulos, K. Scott and W.M. Taama
25-34	A study of hardness and grain size in pulse current electroforming of nickel using different shaped waveforms	K.P. Wong, K.C. Chan and T.M. Yue
35-40	Recovery of activated nickel from residues for electroforming applications	A. Subramanian, K.N. Srinivasan, S. John and T. Vasudevan
41-48	Influence of 2,5-bis(4-dimethylaminophenyl)-1,3,4-thiadiazole on corrosion inhibition of mild steel in acidic media	F. Bentiss, M. Traisnel and M. Lagrenee
49-56	Synthesis and characterization of polypyrrole/TiO2 composites on mild steel	C.A. Ferreira, S.C. Domenech and P.C. Lacaze
57-63	Surface plasma functionalization of polycarbonate: Application to electroless nickel and copper plating	M. Charbonnier, M. Romand, E. Harry and M. Alami
65-72	Influence of heat treatment on the corrosion of high speed steel	V.A. Alves, C.M.A. Brett and A. Cavaleiro
73-78	Structural and electrochemical characteristics of Li4/3Ti5/3O4 as an anode material for rechargeable lithium batteries	K. Kanamura, T. Umegaki, H. Naito, Z. Takehara and T. Yao
79-83	An investigation of some Schiff bases as corrosion inhibitors for austenitic chromium–nickel steel in H2SO4	S. Bİlgİç and N. Çaliskan
85-92	The inhibiting effect of quaternary phosphine on Ni–P alloys in 1 M H2SO4	S.O. Niass, M. Ebn Touhami, N. Hajjaji, A. Srhiri and H. Takenouti
93-98	Calculation of the e.m.f. of solid oxide fuel cells	S.W. Zha, C.R. Xia and G.Y. Meng
99-104	Electrical characteristics of 18650 Li-ion cells at low temperatures	G. Nagasubramanian
105-113	Dynamic characteristics of ship impressed current cathodic protection systems	D.J. Tighe-ford, P. Khambhaita, S.D.H. Taylor and A. Rayner
115-119	Influence of alloying additives on corrosion and hydrogen permeation through commercial aluminium in alkaline solution	M. Paramasivam and S. Venkatakrishna Iyer
121-123	Calendar
129-131	Author Index of Volume 30
133-136	Index to Volume 30 (2000)

Volume 31, Number 2 / February 2001

137-144	Pulse plating of cobalt–iron–copper alloys	P.E. Bradley, B. Janossy and D. Landolt
145-154	Two-dimensional two-phase numerical model for tool design in electrochemical machining	C.S. Chang and L.W. Hourng
155-164	Cathodic refining in molten salts: Removal of oxygen, sulfur and selenium from static and flowing molten copper	G.Z. Chen and D.J. Fray
165-173	Regeneration of hexavalent chromium using a Bi-doped PbO2 anode	K. Mondal, N.V. Mandich and S.B. Lalvani
175-180	Electrochemical properties of oligothienylene–oligosilanylene block copolymers: Influences of block sizes	L. Zhu, H. Tang, Y. Harima, Y. Kunugi and K. Yamashita, et al.
181-192	Use of gaseous Cr species to diagnose surface and bulk process for O2 reduction in solid oxide fuel cells	S.P. Jiang
193-199	On minimum mass transfer at a sintered metal electrode	F. Cœuret
201-205	Performance of a novel Ni/Nb cathode material for molten carbonate fuel cells (MCFC)	B. Fang, C. Zhou, X. Liu and S. Duan
207-212	Electrochemical reduction of dichlorodifluoromethane on silver and lead electrodes	N. Georgolios, G. Kyriacou and G. Ritzoulis
213-222	The effects of 20 kHz and 500 kHz ultrasound on the corrosion of zinc precoated steels in [Cl−] [SO2−4] [HCO−3] [H2O2] electrolytes	V. Ligier, J.Y. Hihn, M. Wéry and M. Tachez
223-231	Pitting corrosion of copper in sulphate solutions: inhibitive effect of different triazole derivative inhibitors	W. Qafsaoui, Ch. Blanc, J. Roques, N. Pébère and A. Srhiri, et al.
233-243	Influence of surfactants on the electroreduction of oxygen to hydrogen peroxide in acid and alkaline electrolytes	E.L. Gyenge and C.W. Oloman
245-250	Electrochemical studies of the nickel electrode with cobalt modification	A.B. Yuan and N.X. Xu
251-254	Calendar

Volume 31, Number 3 / March 2001

257-266	Adsorption and electrosorption at high-area carbon-felt electrodes for waste-water purification: Systems evaluation with inorganic, S-containing anions	E. Ayranci and B.E. Conway
267-273	Mass transport characterization of a novel gas sparged photoelectrochemical reactor	J.C. Harper, P.A. Christensen, T.A. Egerton and K. Scott
275-279	Development and operation of a 150 W air-feed direct methanol fuel cell stack	D. Buttin, M. Dupont, M. Straumann, R. Gille and J-C. Dubois, et al.
281-291	Electropolymerized poly(2-vinylpyridine) coatings as ion-exchange polymer modified electrodes	N. Tantavichet, M.D. Pritzker and C.M. Burns
293-300	Influence of iron addition on the microstructure and the electrochemical corrosion of Al–Zn–Mg alloys	A.V. Benedetti, P.L. Cabot, J.A. Garrido and A.H. Moreira
301-305	Effect of organic extractants on the electrocrystallization of nickel from aqueous sulphate solutions	B.C. Tripathy, P. Singh, D.M. Muir and S.C. Das
307-311	Inhibiting effect of oxidized zirconium on parasitic cathodic reactions in the sodium chlorate process Part I: Hypochlorite reduction	F. Herlitz
313-317	Effects of copper and anions on zinc–nickel anomalous codeposition in plating and electrowinning	M. Sider, C. Fan and D.L. Piron
319-323	Electrocatalytic properties of Ti/TiO2 electrodes prepared by the Pechini method	C.M. Ronconi and E.C. Pereira
325-334	H2 and H2/CO oxidation mechanism on Pt/C, Ru/C and Pt–Ru/C electrocatalysts	L. Giorgi, A. Pozio, C. Bracchini, R. Giorgi and S. Turtù
335-339	Photoelectrical properties of the system ITO/poly(4,4″-dipenthoxy-3′-dodecyl-2,2′:5′,2″-terthiophene)/Al: Effect of electrosynthesis conditions	E.M. Girotto, N. Camaioni, G. Casalbore-Miceli, M.-A. De Paoli and A.M. Fichera, et al.
341-347	The role of particle size in cathode optimization in alkaline primary batteries	A. Urfer, G.A. Lawrance and D.A.J. Swinkels
349-354	Tin–cobalt electrodeposition from sulfate–gluconate baths	E. Gómez, E. Guaus, J. Torrent, X. Alcobe and E. Vallés
355-361	Electrodeposition and characterization of Zn–Ni alloys as sublayers for epoxy coating deposition	J.B. Bajat, M.D. Maksimović, V.B. Mišković-Stanković and S. Zec
363-368	Electrochemical behaviour of iron-complexes in presence of competitive ligands: A strategy for optimization of current density	S. Mohr and T. Bechtold
369-372	Calendar

Volume 31, Number 4 / April 2001

373-378	Platinum-based Alloys as oxygen–reduction Catalysts for Solid–Polymer–Electrolyte Direct Methanol Fuel Cells	M. Neergat, A.K. Shukla and K.S. Gandhi
379-386	Investigation of Ternary Catalysts for Methanol Electrooxidation	A. Lima, C. Coutanceau, J.-M. LÉger and C. Lamy
387-394	Electrochemistry of the SUCOPLATE® Electroplating Bath for the Deposition of a Cu–Zn–Sn Alloy; Part I: Commercial bath	L. Picincu, D. Pletcher and A. Smith
395-402	Electrochemistry of the SUCOPLATE® Electroplating Bath for the Deposition of Cu–Zn–Sn Alloy; Part II: Influence of the concentration of bath components	L. Picincu, D. Pletcher and A. Smith
403-409	Theoretical and Experimental Studies of the Dynamic Behaviour of Plug Flow Electrochemical Reactors for a Step Change in Flow Rate	J.M. Bisang
411-419	A Modified Hull Cell and its Application to the Electrodeposition of Zinc	T.D. Mccolm and J.W. Evans
421-428	Chlorate Transport through Ion-Exchange Membranes	S.A. Perusich and S.M. Reddy
429-435	Corrosion Inhibition of Mild Steel in Acidic Medium using 2-amino Thiophenoland 2-Cyanomethyl Benzothiazole	S.S. Abd El-rehim, S.A.M. Refaey, F. Taha, M.B. Saleh and R.A. Ahmed
437-443	Anodic Oxidation of Nitric Oxide on Au/Nafion®: Kinetics and Mass Transfer	J.-S. Do and K.-J. Wu
445-447	A Dye-Sensitized Nanoporous TiO2 Photoelectrochemical Cell with Novel Gel Network Polymer Electrolyte	Y. Ren, Z. Zhang, E. Gao, S. Fang and S. Cai
449-454	Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes	E. Passalacqua, G. Squadrito, F. Lufrano, A. Patti and L. Giorgi
455-460	Corrosion Behaviour of Ti–4Al–4V Alloy in Nitric, Phosphoric and Sulfuric acid Solutions at Room Temperature	A. Robin, J.L. Rosa and H.R.Z. Sandim
461-468	Composite Electrodeposition of Ultrafine γ-Alumina Particles in Nickel Matrices; Part I: Citrate and chloride electrolytes	A.B. Vidrine and E.J. Podlaha
469-474	Electrooxidation of Cyanide on Cobalt Oxide Anodes	A. Stavart and A. Van Lierde
475-480	Stability of Mercury Film Electrodes under the Influence of High Frequency (500kHz) Ultrasound	J. Davis, F. Javier Del Campo, F. Marken, R.G. Compton and E. Cordemans
481-488	An Electrochemical and XPS Study of Ag–Pb Binary Alloys incorporated in Nafion® Coatings	I.G. Casella
489-494	Calendar

Volume 31, Number 5 / May 2001

495-500	Electrochemical properties of Composites based on Nanocrystalline Anatase (TiO2) and Copper compounds (CuBr, CuO)	Y. Massiani, A. Garnier, M. Eyraud and P. Knauth
501-507	Electrocatalytic Activity of Platinum modified Polypyrrole Films for the Methanol Oxidation reaction	K. Bouzek, K.-M. Mangold and K. Jüttner
509-516	An Electrochemical study of the formation of Benzotriazole surface films on Copper, Zinc and a Copper–Zinc alloy	A.M. Fenelon and C.B. Breslin
517-521	Fluorine-free binders for Carbon Black based Electrochemical Supercapacitors	F. Beck and M. Dolata
523-530	Electrodeionization 1: Migration of Nickel ions absorbed in a rigid, Macroporous Cation-exchange Resin	P.B. Spoor, W.R. ter Veen and L.J.J. Janssen
531-536	Cathodic Film formation during Chromium Electrolysis on Low-carbon Steel using short duration current steps	W.R. Rosas and A. Robin
537-546	Corrosion of Mild Steel in low Conductive Media simulating Natural Waters	M. Sfaira, A. Srhiri, H. Takenouti, M. Marie de Ficquelmont-Loïzos and A. Ben Bachir, et al.
547-557	Electrodeposition of functionalized Pyrrole (N-[3-(dimethylpyridyl-2-yl)aminopropyl], N-(3-aminopropyl), N-(3-acetamidopropyl) and N-(2-cyanoethyl)) on Stainless Steel gauze for membrane preparation	A. Naji, C. Marzin, G. Tarrago, M. Cretin and C. Innocent, et al.
559-564	Effect of particles on Polarization during Electrocodeposition using a Rotating Cylinder Electrode	Jean L. Stojak and Jan B. Talbot
565-572	Optimization of Hydrogen evolving activity on Nickel–Phosphorus Deposits using Experimental Strategies	C.-C. Hu and A. Bai
573-577	Effect of Mg2+, Li+, Na+ and K+ on the Electrocrystallization of Nickel from Aqueous Sulfate solutions containing Boric Acid	B.C. Tripathy, S.C. Das, P. Singh, G.T. Hefter and D.M. Muir
579-583	Effect of Pyridine and its Derivatives on the Electrodeposition of Nickel from Aqueous Sulfate solutions Part I: Current Efficiency, Surface Morphology and Crystal Orientation	U.S. Mohanty, B.C. Tripathy, P. Singh and S.C. Das
585-590	Electrocatalytic Oxidation of Hydrogen Peroxide by Poly(NiIIteta) modified Electrodes§	V. Ganesan and R. Ramaraj
591-598	Comparative study of the Effect of Oxygen and Oxygen/Ozone mixtures on the Electrochemical behaviour of different Metals	M.R. Viera, M. Fernandez Lorenzo de Mele and H.A. Videla
599-604	Calendar

Volume 31, Number 6 / June 2001

605-616	Modelling of through-hole electrodeposition Part I: Effect of electrical migration	S.H. Chan and H.Y. Cheh
617-622	Modelling of through-hole electrodeposition Part II: Experimental study	S.H. Chan and H.Y. Cheh
623-628	Effect of catalyst type on the kinetics of the photoelectrochemical disinfection of water inoculated with E. coli	J.C. Harper, P.A. Christensen, T.A. Egerton, T.P. Curtis and J. Gunlazuardi
629-639	Reduction of metal ions in dilute solutions using a GBC-reactor Part II: Theoretical model for the hydrogen oxidation in a gas diffusion electrode at relatively low current densities	I. Portegies Zwart, J.K.M. Jansen and L.J.J. Janssen
641-646	The role of zinc and sulfuric acid concentrations on zinc electrowinning from industrial sulfate based electrolyte	A.M. Alfantazi and D.B. Dreisinger
647-654	Hydrogen evolution and permeation into steel during zinc electroplating; effect of organic additives	L. Mirkova, G. Maurin, I. Krastev and C. Tsvetkova
655-661	Cyclic voltammetric study of zinc and zinc oxide electrodes in 5.3 M KOH	R. Renuka, L. Srinivasan, S. Ramamurthy, A. Veluchamy and N. Venkatakrishnan
663-670	Effects of Zn and Pb as alloying elements on the electrochemical behaviour of brass in borate solutions	K.M. Ismail, S.S. El-Egamy and M. Abdelfatah
671-676	Steady-state mass transport at stationary discs under divergent laminar radial flow conditions	F. Cœuret and T.Z. Fahidy
677-683	Electrochemical characterization of Ni–P and Ni–Co–P amorphous alloy deposits obtained by electrodeposition	M.M.V. Parente, O.R. Mattos, S.L. Díaz, P. Lima Neto and F.J. Fabri Miranda
685-692	Influence of polyethoxylated additives on zinc electrodeposition from acidic solutions	G. Trejo, H. Ruiz, R. Ortega Borges and Y. Meas
693-702	Electrochemical dissolution of tin in methanesulphonic acid solutions	R.A.T. De Greef and L.J.J. Janssen
703-709	An electrochemical investigation of the suppression of silver dissolution in aqueous cyanide by 2-mercaptobenzothiazole	G.A. Hope, K. Watling and R. Woods
711-718	Role of chromate, molybdate and tungstate anions on the inhibition of aluminiumin chloride solutions	S. Zein El Abedin
719-721	Electrochemical agglomeration of polystyrene latex	M. Pyo and J. Kim
723-728	Calendar

Volume 31, Number 7 / July 2001

729-738	Superactivation of metal electrode surfaces and its relevance to COads oxidation at fuel cell anodes	L.D. Burke, M.A. Horgan, L.M. Hurley, L.C. Nagle and A.P. O'Mullane
739-748	Methanol-resistant cathodic oxygen reduction catalysts for methanol fuel cells	H. Tributsch, M. Bron, M. Hilgendorff, H. Schulenburg and I. Dorbandt, et al.
749-757	Abnormal infrared effects and electrocatalytic properties of nanometer scale thin film of PtRu alloys for CO adsorption and oxidation	M-S. Zheng, S-G. Sun and S-P. Chen
759-765	Formation of intermediates during methanol oxidation: A quantitative DEMS study	H. Wang, T. Löffler and H. Baltruschat
767-771	Mechanistic aspects of methanol oxidation on platinum-based electrocatalysts	J.-M. Léger
773-779	Phosphoric acid doped polybenzimidazole membranes: Physiochemical characterization and fuel cell applications	Li Qingfeng, H.A. Hjuler and N.J. Bjerrum
781-786	Experimental results on the direct electrochemical oxidation of methanol in PEM fuel cells	M. Baldauf and W. Preidel
787-792	Electrooxidation of acetals for direct hydrocarbon fuel cell applications	O. Savadogo and X. Yang
793-798	Synthesis and characterization of carbon-supported Pt–Ru–WOx catalysts by spectroscopic and diffraction methods	C. Roth, M. Goetz and H. Fuess
799-809	Electrocatalytic oxidation of aliphatic alcohols: Application to the direct alcohol fuel cell (DAFC)	C. Lamy, E.M. Belgsir and J-M. Léger
811-817	Composite electrocatalysts for anodic methanol and methanol-reformate oxidation	M. Goetz and H. Wendt
819-822	Calendar

Volume 31, Number 8 / August 2001

823-832	Electrochemical and gas evolution characteristics of direct methanol fuel cells with stainless steel mesh flow beds	K. Scott, P. Argyropoulos, P. Yiannopoulos and W.M. Taama
833-837	Entrance effect on mass transfer in a parallel plate electrochemical reactor	A. Djati, M. Brahimi, J. Legrand and B. Saidani
839-844	Kinetic study of 3,6-dimethylthieno[3,2-b]thiophene electropolymerisation	S.B. Saidman, R.O. Garay and J.B. Bessone
845-853	Electrochemical supercapacitors based on industrial carbon blacks in aqueous H2SO4	F. Beck, M. Dolata, E. Grivei and N. Probst
855-862	Electrochemical activation of the electroless deposition of Ni–P alloy and phase structure characterization of the deposit Part II: Single bath system	R. Stevanović, J. Stevanović and A. Despić
863-870	Vapour–liquid slip in a parallel-plate electrochemical fluorination reactor	K. Jha, G.L. Bauer and J.W. Weidner
871-875	A bipolar electrode cell for aluminium electrorefining	M. Ueda, T. Ohmura, S. Konda, T. Sasaki and T. Ohtsuka, et al.
877-882	Hydrogen peroxide production by water electrolysis: Application to disinfection	P. Drogui, S. Elmaleh, M. Rumeau, C. Bernard and A. Rambaud
883-889	Diagnosis of specific surface area in fuel cell air electrodes	Z.D. Wei, J. Tan, F. Yin, C.G. Cheng and W. Zhu, et al.
891-896	Electrodeposition of La–Ni alloy films in a nonaqueous system	M.Z. An, J.L. Wang and D.Z. Sun
897-903	Electrodeposition and characterization of Au–Cu–Cd alloys	B. Bozzini and P.L. Cavallotti
905-911	Industrial polypyrrole electrodeposition on zinc-electroplated steel	E. Hermelin, J. Petitjean, S. Aeiyach, J.C. Lacroix and P.C. Lacaze
913-920	In situ micro-Raman spectroscopy to investigate pitting corrosion product of 1024 mild steel in phosphate and bicarbonate solutions containing chloride and sulfate ions	S. Simard, M. Odziemkowski, D.E. Irish, L. Brossard and H. Ménard
921-924	1,1′-Bis(11-mercaptoundecyl)ferrocene for potentiometric sensing of H+ ion in sulfuric acid media simulating lead acid battery electrolyte	Touma B. Issa, P. Singh, M. Baker and B.S. Verma
925-933	Properties and microstructure of nickel electrodeposited from a sulfamate bath containing ammonium ions	C.S. Lin, P.C. Hsu, L. Chang and C.H. Chen
935-940	Characterization of electrodeposited thin layers of magnetic alloys by Mössbauer spectroscopy	C. Licour, A. Gérard, C. Jérôme, L. Rabet and L. Martinot
941-946	Calendar

Volume 31, Number 9 / September 2001

945-952	Electrodes modified by electrodeposition of CoTAA complexes as selective oxygen cathodes in a direct methanol fuel cell	P. Convert, C. Coutanceau, P. Crouïgneau, F. Gloaguen and C. Lamy
953-959	Extending the life of maintenance-free lead/acid batteries by etching of grids in sodium hydroxide	R. de Marco, A. Rochliadi and J. Jones
961-967	Electrochemical and surface properties of aluminium in citric acid solutions	M. Šeruga and D. Hasenay
969-972	Effect of pyridine and its derivatives on the electrodeposition of nickel from aqueous sulfate solutions. Part II: Polarization behaviour	U.S. Mohanty, B.C. Tripathy, P. Singh and S.C. Das
973-978	Inhibitory mechanism of low-carbon steel corrosion by mimosa tannin in sulphuric acid solutions	S. Martinez and I. Štern
979-986	Influence of aromatic reactants and products involved in the two stage electrochemical oxidation on the voltammetric behaviour of Ce(IV)/Ce(III) redox couple	T. Vijayabarathi, D. Velayutham and M. Noel
987-995	Preparation and characterization of chromium deposits obtained from molten salts using pulsed currents	A. Cotarta, J. Bouteillon, J.C. Poignet, F. Vasiliu and V. Cotarta
997-1007	Anodic behaviour of carbon materials in NaCl saturated NaAlCl4 fused electrolyte at low temperatures: A cyclic voltammetric study	K.S. Mohandas, N. Sanil, M. Noel and P. Rodriguez
1009-1016	Corrosion behaviour of some stainless steels in chlorinated Gulf seawater	S. Ahmad and A.U. Malik
1017-1024	Computerized scaled cells to study the effect of additive ratios and concentrations on nodulation during copper electrorefining	B. Veilleux, A.-M. Lafront and E. Ghali
1025-1031	Iron(III) tetramethoxyphenylporphyrin (FeTMPP-C1) as electrocatalyst for oxygen reduction in direct methanol fuel cells	G.-Q Sun, J.-T Wang, S. Gupta and R. F. Savinell
1033-1039	Comparative study on electrochemical techniques for determination of hydrogen diffusion coefficients in metal hydride electrodes	X. Yuan and N. Xu
1041-1047	A cyclic voltammetric study of ferrocyanide-thiocyanate silver electrodeposition electrolyte	I. Krastev, A. Zielonka, S. Nakabayashi and K. Inokuma
1049-1054	Study of the performance of secondary alkaline pasted zinc electrodes	C. Zhang, J.M. Wang, L. Zhang, J.Q. Zhang and C.N. Cao
1055-1060	Electrode reaction of the Np3+/Np couple in LiCl–KCl eutectic melts	O. Shirai, M. Iizuka, T. Iwai and Y. Arai
1061-1066	Kinetics of electroless silver deposition using cobalt(II)-ammonia complex compounds as reducing agents	E. Norkus, A. Vaškelis, A. Jagminienė and L. Tamašauskaitė-Tamašiūnaitė
1067-1070	Calendar

Volume 31, Number 10 / October 2001

1071-1077	Electrodeionization 2: The migration of nickel ions absorbed in a flexible ion-exchange resin	P.B. Spoor, W.R. Ter Veen and L.J.J. Janssen
1079-1087	Corrosion of Au–Pd–In alloy in simulated physiological solutions	K. Leinartas, P. Miečinskas, A. Sudavičius, D. Jelinskienė and R. JuškėNAS, et al.
1089-1094	Electrochemical behaviour of copper in trimethyl-n-hexylammonium bis((trifluoromethyl)sulfonyl)amide, an ammonium imide-type room temperature molten salt	K. Murase, K. Nitta, T. Hirato and Y. Awakura
1095-1101	Surface-modified electrodes for NADH oxidation in oxidoreductase-catalysed synthesis	K. Délécouls-Servat, A. Bergel and R. Basséguy
1103-1108	Effect of silicon alloying addition on the corrosion behaviour of aluminium in some aqueous media	S.A. Salih, A.G. Gad-Allah, A.A. Mazhar and R.H. Tammam
1109-1116	Electrodeposition of Sn and Co coatings from citrate solutions	A. Survila, Z. Mockus, R. Juškėnas and V. Jasulaitienė
1117-1124	Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution Part I: A cyclic voltammetry study	Z. Ežerskis and Z. Jusys
1125-1129	Electrodeposition of catalytically active mixed solid films of hexacyanoferrate and decavanadates	K.K. Kasem
1131-1140	The role of chloride ions and pH in the corrosion and pitting of Al–Si alloys	A.A. Mazhar, S.T. Arab and E.A. Noor
1141-1147	Electrodeposition of zinc from high acid zinc chloride solutions	D.S. Baik and D.J. Fray
1149-1153	Synthesis and electrochemical characterization of a new Se-doped spinel material for lithium secondary batteries	Y-K. Sun
1155-1161	Copper deoxidation with calcium carbide melts: electrochemical reactions	E. Krasicka-Cydzik, D. Inman and R.V. Kumar
1163-1170	Reliability and accuracy of measured overpotential in a three-electrode fuel cell system	S.H. Chan, X.J. Chen and K.A. Khor
1171-1173	Stability of perchlorate ions in acid medium: Interaction with nickel and copper metals	M. Ujvári, G. Láng and G. Horányi
1175-1178	Calendar

Volume 31, Number 11 / November 2001

1-2	Calendar
1179-1183	IrO2-deposited Pt electrocatalysts for unitized regenerative polymer electrolyte fuel cells	T. Ioroi, N. Kitazawa, K. Yasuda, Y. Yamamoto and H. Takenaka
1185-1193	Electrochemical reduction of nitrate in weakly alkaline solutions	K. Bouzek, M. Paidar, A. Sadílková and H. Bergmann
1195-1202	A new technique for online visualization of the electrode surface under electrochemical corrosion processes	J. García-Antón, A. Igual-Muñoz, J.L. Guiñón and V. Pérez-Herranz
1203-1212	Electroplating and electroless plating of Ni through/onto a porous polymer in a flow cell	I.J. Brown and S. Sotiropoulos
1213-1220	The use of a segmented tool for the analysis of electrochemical machining	A.R. Mount, P.S. Howarth and D. Clifton
1221-1226	A study of the adsorption properties of commercial carbon dioxide corrosion inhibitor formulations	W.H. Durnie, B.J. Kinsella, R. de Marco and A. Jefferson
1227-1233	Role of ethylamines on the electrochemical behaviour of Fe–Ni alloy films	C.L. Aravinda, V.S. Muralidharan and S.M. Mayanna
1235-1241	Solid electrolyte galvanic cell under load	H. Näfe
1243-1249	Electrical conduction behaviour of Ba2+ and Mg2+ doped LaGaO3 perovskite oxide	K.T. Lee, S. Kim, G.D. Kim and H.L. Lee
1251-1259	Influence of tartaric acid on the electrodeposition of silver from binary water + dioxane AgNO3 solutions	G.M. Zarkadas, A. Stergiou and G. Papanastasiou
1261-1265	Effect of benzotriazole on the corrosion of alpha brass in sulfide polluted salt water	H.S. Hegazy, E.A. Ashour and B.G. Ateya
1267-1271	Preparation and analysis of films on aluminium by high voltage anodization in phosphoric acid and sodium tungstate solution	Y.F. Kuang, J.P. Liu, Z.H. Hou and D.L. He
1273-1279	Anodic oxidation behaviour of Al–Ti alloys in acidic media	Y. Song, X. Zhu, X. Wang, J. Che and Y. Du

Volume 31, Number 12 / December 2001

1285-1291	A spectroelectrochemical investigation of the influence of sodium diisobutyldithiophosphinate on silver dissolution in aqueous cyanide	G.A. Hope, R. Woods and K. Watling
1293-1300	Kinetics of molecular oxygen electroreduction on platinum modified by tin underpotential deposition	C.F. Zinola, J. Rodríguez and G. Obal
1301-1306	Hydrogen concentration in water from an Alkali–Ion–Water electrolyzer having a platinum-electroplated titanium electrode	Kenji Kikuchi, Hiroko Takeda, Beatrice Rabolt, Takuji Okaya and Zempachi Ogumi, et al.
1307-1313	Antioxidant effects of reduced water produced by electrolysis of sodium chloride solutions	K. Hanaoka
1315-1320	Suppression of the α → β-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations	R.S. Jayashree and P. Vishnu Kamath
1321-1326	Novel preparation and electrochemical study of the dithiocarbamate polymer/thiuram disulfide redox system	M. Lieder and C.W. Schläpfer
1327-1332	Raman spectroscopy studies of concentrated vanadium redox battery positive electrolytes	N. Kausar, R. Howe and M. Skyllas-Kazacos
1333-1338	Electrochemical behaviour of cadmium in NaOH solution	K.M. Ismail
1339-1344	Electrochemical monitoring of water remediation by metallic iron	T. Bigg and S.J. Judd
1345-1350	Electrodeposition of aluminium and aluminium/platinum alloys from AlCl₃/benzyltrimethylammonium chloride room temperature ionic liquids	Andrew P. Abbott, Christopher A. Eardley, Nicola R.S. Farley, Gerald A. Griffith and Allin Pratt
1351-1357	Galvanostatic oxidation of formaldehyde-methanol solutions on Ti/Ru_0.3Ti_0.7O₂ electrodes using a filter-press cell	G.R.P. Malpass and A.J. Motheo
1359-1366	The influence of some parameters on the surface roughness of thin copper foils using statistical analysis	M.A. Getrouw and A.J.B. Dutra
1367-1372	Electroless deposited Ni–Re–P, Ni–W–P and Ni–Re–W–P alloys	E. Valova, S. Armyanov, A. Franquet, A. Hubin and O. Steenhaut, et al.
1373-1379	AC impedance spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors	Q. Lu, M.M. Stack and C.R. Wiseman
1381-1387	Electrochemical chromic acid regeneration process with fuel-cell electrode assistance. Part I: Removal of contaminants	M.I. Ahmed, T.M. Holsen and J.R. Selman
1389-1394	Chromic acid regeneration process with fuel cell electrode assistance. Part II: Electrochemical characterization, material compatibility and energy consumption	M.I. Ahmed, T.M. Holsen and J.R. Selman
1395-1397	Electrochemical deposition of Copper on patterned Cu/Ta(N)/SiO₂ surfaces for super filling of sub-micron features	W.H. Li, J.H. Ye and S.F.Y. Li
1399-1402	Calender
1403-1406	Instructions for authors
1407-1409	Author Index of Volume 31
1411-1414	Index to Volume 31 (2001)

Volume 32, Number 1 / January 2002

1-10	Electrodeionisation 3: The removal of nickel ions from dilute solutions	P.B. Spoor, L. Koene, W.R. Ter Veen and L.J.J. Janssen
11-18	Electrochemical characterization of radiation-grafted ion-exchange membranes based on different matrix polymers	Tanja Kallio, Matts Lundström, Göran Sundholm, Nadia Walsby and Franciska Sundholm
19-23	Molten V₂O₅/Cs_0.9K_0.9Na_0.2S₂O₇ and V₂O₅/K₂S₂O₇ catalysts as electrolytesin an electrocatalytic membrane separation device for SO₂ removal	S.B. Rasmussen, K.M. Eriksen, R. Fehrmann and J. Winnick
25-34	Mass transfer ambiguities in swirling pipe flows	S. Martemianov and V.L. Okulov
35-41	The study of aluminium corrosion in acidic solution with nontoxic inhibitors	M. Metikoš-Huković, R. Babić and Z. Grubač
43-48	Effect of electrolysis factors on crystal orientation and morphology of electrodeposited cobalt	H. Nakano, K. Nakahara, S. Kawano, S. Oue and T. Akiyama, et al.
49-55	Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part II: An electrochemical quartz crystal microbalance study	Z. Ežerskis, G. Stalnionis and Z. Jusys
57-63	Electrochemical ferrate generation for waste water treatment using cast irons with high silicon contents	V. Lescuras-Darrou, F. Lapicque and G. Valentin
65-72	Inhibition of copper corrosion by several Schiff bases in aerated halide solutions	H. Ma, S. Chen, L. Niu, S. Zhao and S. Li, et al.
73-83	Influence of heat transfer on anodic oxidation of aluminium	I. De Graeve, H. Terryn and G.E. Thompson
85-89	Corrosion resistance of compositionally modulated Zn–Ni multilayers electrodeposited from dual baths	I. Ivanov, T. Valkova and I. Kirilova
91-96	Photoenhanced hydrogen insertion and transport in thiophene oligomers	M. Bungs and H. Tributsch
97-104	Electrodeposition of compositionally modulated Au/Co alloy layers	S. Valizadeh, E.B. Svedberg and P. Leisner
105-110	Corrosion protection of iron by polystyrenesulfonate-doped polypyrrole films	H. Nguyen Thi Le, B. Garcia, C. Deslouis and Q. Le Xuan
111-117	Ternary alkali carbonate composition-oxygen solubility relationship under atmospheric and pressurized conditions – a utility model for MCFC	M. Mohamedi, Y. Hisamitsu and I. Uchida
119-122	Instructions For Authors

Volume 32, Number 2 / February 2002

123-128	Aluminium composite coatings containing micrometre and nanometre-sized particles electroplated from a non-aqueous electrolyte	J. Fransaer, E. Leunis, T. Hirato and J-P. Celis
129-133	Electrocatalytic reduction of dioxygen on hemin based carbon paste electrode	N. Zheng, Y. Zeng, P.G. Osborne, Y. Li and W. Chang, et al.
135-143	Unsteady diffusion effects on electrodeposition into a submicron trench	R. Chalupa, Y. Cao and A.C. West
145-148	Cu-based amorphous alloy electrodes for fuel cells	K. Brunelli, M. Dabalà and M. Magrini
149-156	Effect of temperature on stability of adsorbed inhibitors on steel in phosphoric acid solution	M.A. Ameer, E. Khamis and G. Al-Senani
157-164	Tarnishing and corrosion of silver-based casting alloys in synthetic salivas of different compositions	M. Fernández Lorenzo de Mele and G. Duffó
165-171	Electrodeposition of Au–Sn alloys from alkaline baths	B. Bozzini, G. Giovannelli, S. Natali, M. Serra and A. Fanigliulo
173-178	Composition dependence of the oxygen-evolution reaction rate on Ir_xTi_1−xO₂ mixed-oxide electrodes	Kazuki Endo, Yasushi Katayama, Takashi Miura and Tomiya Kishi
179-184	Electrochemical behaviour of Ni + Al alloy as an alternative material for molten carbonate fuel cell cathodes	T. Kudo, Y. Hisamitsu, K. Kihara, M. Mohamedi and I. Uchida
185-191	In situ microobservation of the cathode in molten carbonate fuel cells	M. Kawase, K. Asano, H. Murata, Y. Mugikura and T. Watanabe, et al.
193-196	Electrosynthesis of 4,4′-dinitroazobenzene on PbO₂ electrodes	S. Abaci, U. Tamer, K. Pekmez and A. Yildiz
197-201	Electrochemical decomposition of bisphenol A using Pt/Ti and SnO₂/Ti anodes	S. Tanaka, Y. Nakata, T. Kimura, Yustiawati and M. Kawasaki, et al.
203-210	Surface characterization and photocatalytic reactivity of innovative Ti/TiO₂ and Ti/Pt−TiO₂ mesh photoelectrodes	X-Z. Li and F-B. Li
211-216	Catalysts for oxygen reduction from heat-treated carbon-supported iron phenantroline complexes	M. Bron, S. Fiechter, M. Hilgendorff and P. Bogdanoff
217-223	Electroreduction of nitrobenzene to p-aminophenol using voltammetric and semipilot scale preparative electrolysis techniques	K. Polat, M.L. Aksu and A.T. Pekel
225-230	Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate	J. Torrent-Burgués, E. Guaus and F. Sanz
231-235	Current oscillations during electrodissolution of iron in perchloric acid solutions	S.-Y. Zhao, S.-H. Chen, H.-Y. Ma, D.-G. Li and F.-J. Kong
237-239	Calendar

Volume 32, Number 3 / March 2002

241-249	The voltage of alumina reduction cells prior to the anode effect	H. Vogt and J. Thonstad
251-258	Entropy change in lithium ion cells on charge and discharge	K. Takano, Y. Saito, K. Kanari, K. Nozaki and K. Kato, et al.
259-265	The influence of electrode morphology on the performance of a DMFC anode	J. Nordlund, A. Roessler and G. Lindbergh
267-273	Temperature dependence studies of a.c. impedance of lithium-ion cells	P. Suresh, A.K. Shukla and N. Munichandraiah
275-279	A novel silver oxide electrode and its charge–discharge performance	H.T. Liu, X. Xia and Z.P. Guo
281-285	A Zn(II) ion-selective electrode based on chalcogenide As₂Se₃–Sb₂Se₃–ZnSe and GeSe₂–ZnSe–ZnTe glasses	S.V. Boycheva, V.S. Vassilev and Z.G. Ivanova
287-295	High specific surface area, reticulated current collectors for lead–acid batteries	E. Gyenge, J. Jung, S. Splinter and A. Snaper
297-303	Kinetics of electroless copper deposition using cobalt(II)-ethylenediamine complex compounds as reducing agents	A. Vaškelis, E. Norkus and J. Jačiauskienė
305-310	Influence of CaF₂ and AlF₃ on the kinetics and mechanism of the Al electrode reaction in cryolite melts with various alumina contents	A. Kisza, J. Kaźmierczak, J. Thonstad and J. Hiveš
311-320	Effect of complexing agents on the electrochemical behaviour of orthopaedic stainless steel in physiological solution	I. Milošev
321-328	Electrohydrogenation of 4-amino-5-nitrosodimethyluracil with a foamed nickel cathode	X.E. Hu, H.W. Yang, X.J. Wang and R.S. Bai
329-337	Galvanostatic and microscopic studies of nodulation during copper electrolysis	A-M. Lafront, B. Veilleux and E. Ghali
339-347	Polarization effects in electrolyte/electrode-supported solid oxide fuel cells	S.H. Chan and Z.T. Xia
349-352	Photochemical formation of palladium patterns on surface-modified polyimide resin	M. Seita, H. Nawafune, T. Nishioka, S. Mizumoto and T. Kanai
353-357	Calendar

Volume 32, Number 4 / April 2002

359-367	Preparation of CdS thin films by electrodeposition: effect of colloidal sulfur particle stability on film composition	M. Takahashi, S. Hasegawa, M. Watanabe, T. Miyuki and S. Ikeda, et al.
369-377	Potential and concentration gradients in a hybrid ion-exchange/electrodialysis cell	P.B. Spoor, L. Koene and L.J.J. Janssen
379-382	Gas purification by removal of atomic mercury using electrochemical cells	Ch. Kabbe, G. Kauschka and F. Scholz
383-388	Effects of the cathode gas diffusion layer characteristics on the performance of polymer electrolyte fuel cells	E. Antolini, R.R. Passos and E.A. Ticianelli
389-394	Influence of an electrochemically generated gas phase on pressure drop in a three-dimensional electrode and an inert bed	S.M. Šerbula and V.D. Stanković
395-400	Investigation on inhibition of CrO₄²⁻ and MoO₄²⁻ ions on carbon steel pitting corrosion by electrochemical noise analysis	Z.H. Dong, X.P. Guo, J.X. Zheng and L.M. Xu
401-407	Behaviour of intact and scratched phosphate coatings on zinc, zinc–nickel and mild steel in dilute sodium phosphate solution	J. Flis, Y. Tobiyama, C. Shiga and K. Mochizuki
409-414	Electrochemical treatment of dilute cyanide solutions containing zinc complexes by oxidation at carbon felt (Sigratherm)	A. Socha, E. Kuśmierek and E. Chrześcijańska
415-424	Recycling wood pulping chemicals by molten salt electrolysis: cyclic voltammetry of mixtures containing Na₂CO₃ and Na₂SO₄	R. Wartena, J. Winnick and P.H. Pfromm
425-430	Inhibition of mild steel corrosion in the presence of fatty acid triazoles	M.A. Quraishi and D. Jamal
431-438	Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid	Z. Grubač, R. Babić and M. Metikoš-Huković
439-446	Effect of heat treatment on electroless ternary nickel–cobalt–phosphorus alloy	M.M. Younan, I.H.M. Aly and M.T. Nageeb
447-453	Cyclic voltammetric behaviour of polyfuran perchlorate doped films	M.J. González-Tejera and I. Carrillo
455-465	Current–voltage behaviour of bipolar membranes in concentrated salt solutions investigated with chronopotentiometry	F.G. Wilhelm, N.F.A. van der Vegt, H. Strathmann and M. Wessling
467-470	Calendar

Volume 32, Number 5 / May 2002

473-479	Electrochemical recovery of silver from cyanide leaching solutions	V. Reyes Cruz, M.T. Oropeza, I. González and C. Ponce-De-León
481-486	Electrochemical regeneration of chrome etching solution	Y. Van Andel and L.J.J. Janssen
487-496	An electrochemical study of the behaviour of ear piercing studs immersed in a culture medium	J.M. Bastidas, M. Saiki, S.O. Rogero, I. Costa and J.L. Polo
497-504	Study of the properties of a multi-component inhibitor used for water treatment in cooling circuits	N. Ochoa, G. Baril, F. Moran and N. Pébère
505-512	Electrochemical properties of Pb–Sb, Pb–Ca–Sn and Pb–Co₃O₄ anodes in copper electrowinning	A. Hrussanova, L. Mirkova and TS. Dobrev
513-520	Preparation and electrochemical characterization of Ti/Ru_xMn_1−xO₂ electrodes	J.L. Fernández, M.R. Gennero De Chialvo and A.C. Chialvo
521-526	Electrochemical reduction of solutions of ReF₆ in fused LiF–NaF–KF eutectic mixture	A.M. Affoune, J. Bouteillon and J.C. Poignet
527-535	Corrosion inhibition of steel in chloride-containing alkaline solutions	C. Monticelli, A. Frignani and G. Trabanelli
537-541	Studies on the synthesis of sodium ates (NaH₂PO₄, Na₂HPO₄, Na₃PO₄) using membrane electrolysis	B. Pisarska, W. Gnot and R. Dylewski
543-550	Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part IV: A gas chromatography mass spectrometry study	Z. Ežerskis and Z. Jusys
551-559	An MHD-based treatment of electrolysis in magnetic fields generated inside a solenoid	T.Z. Fahidy
561-567	Removal of nonylphenol ethoxylates by electrochemically-generated coagulants	G.A. Ciorba, C. Radovan, I. Vlaicu and S. Masu
569-572	Electrolysis of V(IV) and free meso-tetraphenyl porphyrin in two immiscible liquids	G.A. Jorge R, E. García and C.E. Scott
573-579	High-temperature electrochemical synthesis of carbides, silicides and borides of VI-group metals in ionic melts	V.V. Malyshev, H.B. Kushkhov and V.I. Shapoval
581-582	Stability of perchlorate ions in acid medium: Interaction with zinc and aluminium	M. Ujvári, G. Láng and G. Horányi

Volume 32, Number 6 / June 2002

583-589	The anodic behaviour of Ebonex^® in oxalic acid solutions	K. Scott and H. Cheng
591-596	Electrochemically assisted photocatalytic degradation of oxalic acid on particulate TiO₂ film in a batch mode plate photoreactor	J. Krýsa and J. Jirkovský
597-601	Electrochemical water disinfection Part III: Hypochlorite production from potable water with ultrasound assisted cathode cleaning	A. Kraft, M. Blaschke and D. Kreysig
603-609	Electrocatalytic hydrogenation of phenol in aqueous solutions at a Raney nickel electrode in the presence of cationic surfactants	H. Ilikti, N. Rekik and M. Thomalla
611-620	Electrochemical study of thiourea and substituted thiourea adsorbates on polycrystalline platinum electrodes in aqueous sulfuric acid	A.E. Bolzán, R.C.V. Piatti, R.C. Salvarezza and A.J. Arvia
621-627	Effect of thiourea and saccharin on the roughness of electrodeposited ultrathin nickel and cobalt layers	R.F. Renner and K.C. Liddell
629-634	Effects of boric acid on hydrogen evolution and internal stress in films deposited from a nickel sulfamate bath	Y. Tsuru, M. Nomura and F.R. Foulkes
635-639	Application of electrochemical techniques for the control of cracks and steel corrosion in concrete	J-S. Ryu and N. Otsuki
641-646	Porosity determination of nickel coatings on copper by anodic voltammetry	H.A. Ponte and A.M. Maul
647-651	Direct electrochemical reduction of indigo: process optimization and scale-up in a flow cell	A. Roessler, O. Dossenbach, P. Rys and W. Marte
653-660	Influence of power ultrasound on the corrosion of aluminium and high speed steel	N.L.P.A. De Morais and C.M.A. Brett
661-670	Monitoring hydrogen absorption in Pd electrodes by means of electric and electrochemical signals	A. Vertova, S. Rondinini and G. Busca
671-678	Effect of iodide ions on corrosion inhibition of mild steel by 3,5-bis(4-methylthiophenyl)-4H-1,2,4-triazole in sulfuric acid solution	F. Bentiss, M. Bouanis, B. Mernari, M. Traisnel and M. Lagrenee
679-685	Nano-scale copper-coated graphite as anode material for lithium-ion batteries	K. Guo, Q. Pan, L. Wang and S. Fang
687-692	Advanced Sn/C composite anodes for lithium ion batteries	Y. Liu, J.Y. Xie, Y. Takeda and J. Yang
693-700	Thick cobalt coatings obtained by electrodeposition	E. Gómez and E. Vallés
701-707	Influence of copper anion complexes on the incorporation of metal particles in polyaniline Part I: Copper citrate complex	S. Ivanov and V. Tsakova
709-715	Influence of copper anion complexes on the incorporation of metal particles in polyaniline Part II: Copper oxalate complex	S. Ivanov and V. Tsakova
717-722	Calendar

Volume 32, Number 7 / July 2002

725-733	Recycling kraft pulping chemicals: cyclic voltammetry of molten salt mixtures containing Na₂CO₃, Na₂SO₄, Na₂S/Na₂S_x and Na₂O/Na₂O₂	R. Wartena, J. Winnick and P.H. Pfromm
735-741	Ir-based oxide electrodes: oxygen evolution reaction from mixed solvents	A. Rossi and J.F.C. Boodts
743-753	Copper electrodeposition from a pH 3 sulfate electrolyte	A. Vicenzo and P.L. Cavallotti
755-762	Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution Part III: A Fourier transformed infrared spectroscopy study	Z. Ežerskis and Z. Jusys
763-773	Voltammetric and morphological characterization of copper electrodeposition from non-cyanide electrolyte	M.R.H. De Almeida, I.A. Carlos, L.L. Barbosa, R.M. Carlos and B.S. Lima-Neto, et al.
775-781	Inhibition of corrosion of steel in produced water of Western Desert crude oil	F.M. Mahgoub, B.A. Abd El-Nabey, S.A. El-Kharashi, M. Atteya and M.SH. Ramadan, et al.
783-793	Electrochemical and surface analysis study of copper corrosion protection by 1-propanethiol and propyltrimethoxysilane: A comparison with 3-mercaptopropyltrimethoxysilane	R. Tremont and C.R. Cabrera
795-803	Microstructural and corrosion studies of Ti alloy (IMI 834) in acidic solutions	V.B. Singh and A. Gupta
805-809	Silver–carbon electrocatalyst for air cathodes in alkaline fuel cells	S. Gamburzev, K. Petrov and A.J. Appleby
811-818	Properties of silver–antimony alloys electrodeposited from ferrocyanide–thiocyanate electrolytes	I. Krastev, N. Petkova and A. Zielonka
819-824	Formation and size control of titanium particles by cathode discharge electrolysis of molten chloride	T. Oishi, H. Kawamura and Y. Ito
825-830	A catalytic platinum–ruthenium–polyaniline electrode for methanol oxidation	T. Kessler and A.M. Castro Luna
831-838	Chlorine evolution in a centrifugal field	H. Cheng, K. Scott and C. Ramshaw
839-844	Liquid-phase p-t-butyltoluene autoxidation enhanced by electrochemistry: Activation of the catalytic effect of cobalt acetate	J. Lozar, D. Bejan and A. Savall
845-852	Calendar

Volume 32, Number 8 / August 2002

3	Editorial
5-6	5th International Symposium on Electrochemical Impedance Spectroscopy Marilleva (Trento), Italy, June 2001
853-857	An EIS study of the influence of imperfections on the corrosion behaviour of an organic coated steel system	V. Lavaert, M. Moors and E. Wettinck
859-863	Characterization of membrane electrode assemblies in polymer electrolyte fuel cells using a.c. impedance spectroscopy	N. Wagner
865-869	Corrosion mechanisms of steel concrete moulds in the presence of a demoulding agent	A. Carnot, I. Frateur, P. Marcus and B. Tribollet
871-874	Electrochemical characterization of vacuum plasma sprayed thin-film solid oxide fuel cells (SOFC) for reduced operating temperatures	M. Lang, T. Franco, G. Schiller and N. Wagner
875-882	Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells	H. Schichlein, A.C. Müller, M. Voigts, A. Krügel and E. Ivers-Tiffée
883-889	An electrochemical impedance study of hydrogen evolution and absorption on Sn-modified steel electrodes	L.F.P. Dick, M.B. Lisboa and E.B. Castro
891-896	A simple testing method for quality control of phosphate coatings based on impedance measurements	G. Lendvay-Győrik, G. Mészáros and B. Lengyel
897-903	EIS testing of new aluminium sacrificial anodes	M.A. Talavera, S. Valdez, J.A. Juarez-Islas, B. Mena and J. Genesca
905-913	The influence of different surface conditions in the corrosion process of carbon steel in alkaline sour media	E. Sosa, R. Cabrera-Sierra, M.T. Oropeza and I. González
915-919	Copper phthalocyanine as corrosion inhibitor for ASTM A606-4 steel in 16% hydrochloric acid	I.V. Aoki, I.C. Guedes and S.L.A. Maranhão
921-927	Defect dimension evaluation in organic coated galvanized steel by electrochemical impedance spectroscopy	F. Deflorian, L. Fedrizzi, S. Rossi and P.L. Bonora
929-936	Study of a Li–Ni oxide mixture as a novel cathode for molten carbonate fuel cells by electrochemical impedance spectroscopy	M.J. Escudero, X.R. Nóvoa, T. Rodrigo and L. Daza
937-942	Calendar

Volume 32, Number 9 / September 2002

943-950	Cathodic decolourization of textile dyebaths: Tests with full scale plant	T. Bechtold, C. Mader and J. Mader
951-960	Electrocatalytic removal of dissolved oxygen from seawater in a packed-bed electrode	P. Kinzel, H-G. Lintz, P. Gaudebert, G. Bousquet and F. Lapicque, et al.
961-968	An electrochemical approach to total organic carbon control in printed circuit board copper sulfate plating baths Part I: Anode performances	M. Gattrell, B. MacDougall, Y.M. Henuset and J. Fournier
969-975	Ammonium nitrate wastewater treatment by coupled membrane electrolysis and electrodialysis	E. Gain, S. Laborie, Ph. Viers, M. Rakib and G. Durand, et al.
977-985	Asymmetric alumina membranes electrochemically formed in oxalic acid solution	P. Bocchetta, C. Sunseri, A. Bottino, G. Capannelli and G. Chiavarotti, et al.
987-992	Study of the mechanism of additives on copper dissolution in monoethanolamine-complexed cupric ion solution	C-W. Shih, Y-Y. Wang and C-C. Wan
993-1000	Anodically deposited manganese–molybdenum–tungsten oxide anodes for oxygen evolution in seawater electrolysis	T. Matsui, H. Habazaki, A. Kawashima, K. Asami and N. Kumagai, et al.
1001-1004	Leaching behaviour of tin with oxygen in recycled phenolsulfonic acid tin plating solutions	S-K. Kim, H-J. Sohn, T. Kang, T.S. Kim and T.Y. Kim
1005-1010	Kinetics of hydrogen evolution on submicron size Co, Ni, Pd and Co–Ni alloy powder electrodes by d.c. polarization and a.c. impedance studies	P. Elumalai, H.N. Vasan, N. Munichandraiah and S.A. Shivashankar
1011-1017	Anode materials for lithium ion batteries from mild oxidation of natural graphite	Y.P. Wu, C. Jiang, C. Wan and R. Holze
1019-1027	Electrodeposition of cobalt from gluconate electrolyte	S.S. Abd El Rehim, Magdy A.M. Ibrahim and M.M. Dankeria
1029-1037	High-rate electrochemical dissolution of Ni–Cu alloys in nitrate electrolyte	W. Hoogsteen, S. Kuindersma, B.P. Minks and A.D. Davydov
1039-1042	Synergistic effects of novel battery manufacturing processes for lead–acid batteries. Part I: Charge/discharge cycling of batteries	A. Rochliadi and R. De Marco
1043-1048	An in situ spectroelectrochemical Raman investigation of Au electrodeposition and electrodissolution in KAu(CN)₂ solution	B. Bozzini and A. Fanigliulo
1049-1052	Electrochemical enhancement of glucose oxidase kinetics: Gluconic acid production with anion exchange membrane reactor	J.A. Hestekin, Y.P. Lin, J.R. Frank, S.W. Snyder and E.J. St. Martin
1053-1056	Synthesis and electrochemical performance of layered Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂ cathode materials for lithium secondary batteries	Y-K. Sun, S-S. Shin and I-H. Oh
1057-1061	Calendar

Volume 32, Number 10 / October 2002

1063-1069	Novel bipolar electrodes for battery applications	Ch.M. Hagg and M. Skyllas-Kazacos
1071-1079	A novel non-flammable electrolyte containing methyl nonafluorobutyl ether for lithium secondary batteries	J. Arai
1081-1089	Determination of mass diffusion overpotential distribution with flow pulse method from current distribution measurements in a PEMFC	M. Noponen, T. Hottinen, T. Mennola, M. Mikkola and P. Lund
1091-1099	Chromium removal using a porous carbon felt cathode	E.P.L. Roberts and H. Yu
1101-1107	Measurement of polarization parameters impacting on electrodeposit morphology I: Theory and development of technique	P.A. Adcock, S.B. Adeloju and O.M.G. Newman
1109-1118	Anodic behaviour of alkaline solutions containing copper cyanide and sulfite on the graphite anode	J. Lu, D.B. Dreisinger and W.C. Cooper
1119-1129	Anodic oxidation of copper cyanide on graphite anodes in alkaline solution	J. Lu, D.B. Dreisinger and W.C. Cooper
1131-1140	Oxygen reduction on silver catalysts in solutions containing various concentrations of sodium hydroxide – comparison with platinum	M. Chatenet, L. Genies-Bultel, M. Aurousseau, R. Durand and F. Andolfatto
1141-1149	Electrodeposition and properties of cyclically modulated silver–antimony alloys	I. Krastev and A. Zielonka
1151-1156	Effect of pulse reversal on the properties of pulse plated CdSe_xTe_1−x thin films	K.R. Murali and V. Swaminathan
1157-1165	An integrated approach to evaluate the leaching behaviour of silver from sulfide concentrates	R.M. Luna-Sánchez, I. González and G.T. Lapidus
1167-1174	The electrochemical quartz crystal microbalance as a sensor in the gold thiosulfate leaching process	P.L. Breuer, M.I. Jeffrey, E.H.K. Tan and A.W. Bott
1175-1182	Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer	F. Cœuret, E. Oliveira Vilar and E. Bezerra Cavalcanti
1183-1187	Calendar

Volume 32, Number 11 / November 2002

1189-1192	Electrolytic synthesis of succinic acid in a flow reactor with solid polymer electrolyte membrane	S.S. Vaghela, G. Ramachandraiah, P.K. Ghosh and D. Vasudevan
1193-1200	Influence of different anions on the behaviour of aluminium in aqueous solutions	E. Van Gheem, J. Vereecken and C. Le Pen
1201-1209	Influence of magnesium and aluminium ions on the copper a.c. deposition into aluminium anodic oxide film nanotubes	A. Jagminas
1211-1218	Chlorophenol electrooxidation on iron oxide-covered aluminosilicates deposited on glassy carbon	M.S. Ureta-Zañartu, M.L. Mora, M.C. Diez, C. Berríos and J. Ojeda, et al.
1219-1227	An approximate solution to the model of a sparged packed bed electrode reactor	Y. Sun, B. Wu, O. Qiu, W. Xu and K. Scott
1229-1233	Effect of oxygen flow rate on the structural and electrochemical properties of lithium nickel oxides synthesized by the sol–gel method	K-S. Park, S-H. Park, Y-K. Sun, K-S. Nahm and Y-S. Lee, et al.
1235-1239	Electrowinning of palladium using a modified cyclone reactor	Y-U. Kim, H-W. Cho, H-S. Lee, C-K. Lee and J-C. Lee, et al.
1241-1246	Combined electrooxidation and assisted electrochemical coagulation of aqueous phenol wastes	P. Cañizares, F. Martínez, J. García-Gómez, C. Sáez and M.A. Rodrigo
1247-1255	Electrochemical nucleation and growth of copper on chromium-plated electrodes	S-B. Kim, K-T. Kim, C-J. Park and H-S. Kwon
1257-1264	Galvanostatic anodization of pure Al in some aqueous acid solutions Part I: Growth kinetics, composition and morphological structure of porous and barrier-type anodic alumina films	S.S. Abdel Rehim, H.H. Hassan and M.A. Amin
1265-1268	In situ electropolymerized polyaniline–polyacrylonitrile composite film for the construction of a polyphenol oxidase-based biosensor	H. Xue, Z. Shen and H. Zheng
1269-1278	Cementation and corrosion at a RDE: Changes in flow and transfer phenomena induced by surface roughness	C. Alemany, M. Aurousseau, F. Lapicque and P. Ozil
1279-1285	Influence of preparation process of MEA with mesocarbon microbeads supported Pt–Ru catalysts on methanol electrooxidation	Y-C. Liu, X-P. Qiu, Y-Q. Huang, W-T. Zhu and G-S. Wu
1287-1295	Electrochemical behaviour of thermally sprayed Cr₃C₂–NiCr coatings in 0.5 M H₂SO₄ media	P.H. Suegama, C.S. Fugivara, A.V. Benedetti, J. Fernández and J. Delgado, et al.
1297-1301	Calendar

Volume 32, Number 12 / December 2002

1303-1311	An electrochemical approach to total organic carbon control in printed circuit board copper sulfate plating baths Part II: Overall system	M. Gattrell, B. MacDougall, Y.M. Henuset and J. Fournier
1313-1319	Effect of an electric field on the heterogeneous nucleation and crystal growth of potassium hydrogen tartrate in wines	V. Guillet, N. Gabas, M. Comtat and J.L. Favarel
1321-1329	Some aspects of the electrochemistry of the flotation of pyrrhotite	A.M. Buswell and M.J. Nicol
1331-1336	Hydrogen incorporation in Ni–P films prepared by electroless deposition	M. Saaoudi, E. Chassaing, M. Cherkaoui and M. Ebntouhami
1337-1340	Recycling and regeneration of used perfluorosulfonic membranes for polymer electrolyte fuel cells	H-F. Xu, X. Wang, Z-G. Shao and I-M. Hsing
1341-1346	Electrochemical study of the chromium electrode behaviour in borate buffer solution	D. Marijan and M. Gojić
1347-1353	A zinc–air cell employing a porous zinc electrode fabricated from zinc–graphite-natural biodegradable polymer paste	R. Othman, A.H. Yahaya and A.K. Arof
1355-1361	Electrochemical study of the adsorption and inhibiting properties of halogen derivatives of aniline on iron in sulfuric acid	E. Lazarova, G. Petkova, R. Raicheff and G. Neykov
1363-1370	Electrochemical behaviour of low carbon steel in concentrated carbonate chloride brines	F.M. Al-Kharafi, B.G. Ateya and R.M. Abdallah
1371-1378	Mechanism of copper electrodeposition by pulse current and its relation to current efficiency	W-C. Tsai, C-C. Wan and Y-Y. Wang
1379-1382	Rectification behaviour of some metal ion–metal interfaces and concentration cells	K.K. Agarwal and H.P. Agarwal
1383-1390	Design, construction and operation of a laboratory scale electrolytic cell for sodium production using a β″-alumina based low-temperature process	K.S. Mohandas, N. Sanil and P. Rodriguez
1391-1396	Nucleation during electrocrystallization of cobalt on glassy carbon (GC)	K.G. Mishra, P. Singh and D. Muir
1397-1401	Effect of heat treatment on corrosion and electrochemical behaviour of AZ91D magnesium alloy	N.N. Aung and W. Zhou
1403-1406	Stability of perchlorate ions in acid medium: Interaction with iron	M. Ujvári, G. Láng and G. Horányi
1407-1411	Calendar
1413-1416	Instructions for Authors
1417-1419	Author Index of Volume 32
1421-1424	Subject Index of Volume 32

Volume 33, Number 1 / January 2003

1-8	Preparation of methanol oxidation electrocatalysts: ruthenium deposition on carbon-supported platinum nanoparticles	F. Maillard, F. Gloaguen and J-M. Leger
9-13	H₂/Cl₂ fuel cell for co-generation of electricity and HCl	M. Thomassen, B. Børresen, G. Hagen and R. Tunold
15-21	An environmentally friendly water-activated manganese dioxide battery	K. Vuorilehto
23-27	Optimization of chemical and electrochemical parameters for the preparation of n-type Bi₂Te_2.7Se_0.3 thin films by electrodeposition	S. Michel, N. Stein, M. Schneider, C. Boulanger and J-M. Lecuire
29-36	New structures of thin air cathodes for zinc–air batteries	W.H. Zhu, B.A. Poole, D.R. Cahela and B.J. Tatarchuk
37-42	Corrosion behaviour of tantalum in sodium hydroxide solutions	A. Robin
43-49	Effects of cobalt, temperature and certain impurities upon cobalt electrowinning from sulfate solutions	A.E. Elsherief
51-59	Electrochemical detection of large channels in porous rocks	S.O. Engblom, J.C. Myland, K.B. Oldham, A.L. Taylor and W.C. Topic
61-71	Chemical and electrochemical considerations on the removal process of hexavalent chromium from aqueous media	C. Barrera-Díaz, M. Palomar-Pardavé, M. Romero-Romo and S. Martínez
73-77	Post-discharge plasma-chemical oxidation of Iron(II) complexes	A. Doubla, F. Abdelmalek, K. Khélifa, A. Addou and J.L. Brisset
79-83	Electrochemical oxidation of simple indoles at a PbO₂ anode	P.G. Keech and N.J. Bunce
85-91	Electrolytic decomposition of amaranth dyestuff using diamond electrodes	S. Hattori, M. Doi, E. Takahashi, T. Kurosu and M. Nara, et al.
93-100	Hydrogen coevolution and permeation in nickel electroplating	L. Mirkova, G. Maurin, M. Monev and Chr. Tsvetkova
101-106	An electrochemical investigation of sintered thick metal hydride electrodes for oxygen-metal hydride semi-fuel cell applications	J.-J. Jiang
107-112	Submicro-sized LiMn₂O₄ prepared by a sol–gel, spray-drying method	Chuanyun Wan, Yanna Nuli, Qiang Wu, Manming Yan and Zhiyu Jiang
113-119	Removal of toxic chromate ions by the films of poly(1,8-diaminonaphthalene)	A. Nasalska and M. Skompska
121-124	Voltammetry in electrolyte-free liquids using a three-electrode probe with a sol–gel matrix	J. Widera, W.H. Steinecker, G.E. Pacey and J.A. Cox
125-129	Calendar
131-134	Instructions for Authors

Volume 33, Number 2 / February 2003

135-142	Unusual cavity shapes resulting from multistep mass transport controlled dissolution: Numerical simulation and experimental investigation with titanium using oxide film laser lithography	P.-F. Chauvy and D. Landolt
143-150	Influence of electrolyte additives on safety and cycle life of rechargeable lithium cells	S. Tobishima, Y. Ogino and Y. Watanabe
151-154	Electrochemical oxidation of water on synthetic boron-doped diamond thin film anodes	P-A. Michaud, M. Panizza, L. Ouattara, T. Diaco and G. Foti, et al.
155-159	Influence of various parameters on the electrochemical treatment of landfill leachates	A.G. Vlyssides, P.K. Karlis and G. Mahnken
161-169	Electrolytic reduction of trichloroethylene and chloroform at a Pt- or Pd-coated ceramic cathode	G. Chen, E.A. Betterton, R.G. Arnold and W.P. Ela
171-177	Inhibition of acid corrosion of steel using cetylpyridinium chloride	A.A. Atia and M.M. Saleh
179-186	Protection of copper corrosion by carbazole and N-vinylcarbazole self-assembled films in NaCl solution	C-T. Wang, S-H. Chen, H-Y. Ma and C-S. Qi
187-196	Degradation kinetics of ascorbic acid during ohmic heating with stainless steel electrodes	A. Assiry, S.K. Sastry and C. Samaranayake
197-203	Development of a novel redox flow battery for electricity storage system	B. Fang, Y. Wei, T. Arai, S. Iwasa and M. Kumagai
205-215	Study of mass transfer in a vertically moving particle bed electrode	K. Bouzek, R. Chmelíková, M. Paidar and H. Bergmann
217-225	A study of copper electrowinning parameters using a statistically designed methodology	A.M. Alfantazi and D. Valic
227-231	Calendar

Volume 33, Numbers 3-4 / March 2003

233-238	Corrosion inhibition by fatty acid triazoles for mild steel in formic acid	M.A. Quraishi and F.A. Ansari
239-244	Corrosion resistance of compositionally modulated multilayered Zn–Ni alloys deposited from a single bath	I. Ivanov and I. Kirilova
245-252	Detection and characterization of molybdenum oxides formed during the initial stages of cobalt–molybdenum electrodeposition	E. Gómez, E. Pellicer and E. Vallés
253-258	Electrochemical reduction of vinyl chloride on a Au/porous alumina plate/Pt electrode assembly in nonaqueous electrolytes: Toward the development of gas sensors	M-C. Chuang and M-C. Yang
259-264	Electrochemical remediation of acid mine drainage	M.M.G. Chartrand and N.J. Bunce
265-271	Effect of ambient conditions on performance and current distribution of a polymer electrolyte membrane fuel cell	T. Hottinen, M. Noponen, T. Mennola, O. Himanen and M. Mikkola, et al.
273-277	A new approach to electrochemical production of benzaldehyde from toluene in an undivided cell in the presence of the couple V⁵⁺/V⁴⁺	Y. Qingfeng, L. Xiaoping and Z. Xiuling
279-285	Removal and recovery of copper via a galvanic cementation system Part I: Single-pass reactor	Y.P. Hor and N. Mohamed
287-293	Indole and 5-chloroindole as inhibitors of anodic dissolution and cathodic deposition of copper in acidic chloride solutions	M. Scendo, D. Poddebniak and J. Malyszko
295-301	Electrochemical synthesis and structural studies of polypyrroles, poly(3,4-ethylene-dioxythiophene)s and copolymers of pyrrole and 3,4-ethylenedioxythiophene on carbon fibre microelectrodes	A.S. Saraç, G. Sönmez and F.Ç. Cebeci
303-309	Influence of alloying additives on the performance of commercial grade aluminium as galvanic anode in alkaline zincate solution for use in primary alkaline batteries	M. Paramasivam, M. Jayachandran and S. Venkatakrishna Iyer
311-317	Aspects of electrochemical behaviour of carbon steel in different Bayer plant solutions	L. Gavril, R. Breault and E. Ghali
319-323	Electrochemical behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce⁴⁺ redox mediators in methanesulfonic acid	V. Devadoss, M. Noel, K. Jayaraman and C. Ahmed Basha
325-331	Corrosion behaviour of AB₅-type hydride electrodes in alkaline electrolyte solution	C.S. Wang, M. Marrero-Cruz, J.H. Baricuatro, M.P. Soriaga and D. Serafini, et al.
333-338	Electrochemical studies of magnetite coating on carbon steel in ascorbic and picolinic acid	C.M. Das and M. Sudersanan
339-343	Electrochemical investigations of copper behaviour in different cupric complex solutions: Voltammetric study	R. Drissi-Daoudi, A. Irhzo and A. Darchen
345-348	Operating characteristics of aqueous magnetite electrochemical capacitors	S-Y. Wang and N-L. Wu
349-354	Calendar

Volume 33, Number 5 / May 2003

355-360	Preparation and characterization of polyaniline powder synthesized on microstructured aluminium	D. Huerta-Vilca, S.R. Moraes and A.J. Motheo
361-366	Synergistic effect of 2-mercapto benzimidazole and KI on copper corrosion inhibition in aerated sulfuric acid solution	D-Q. Zhang, L-X. Gao and G-D. Zhou
367-372	Anodic linear sweep voltammetric analysis of Ni–Co alloys electrodeposited from dilute sulfate baths	A.N. Correia and S.A.S. Machado
373-379	Effect of benzylideneacetone on the electrodeposition mechanism of Zn–Co alloy	G. Trejo, R. Ortega, Y. Meas, E. Chainet and P. Ozil
381-386	Cu(II) selective sensor based on 5,7,12,14-tetramethyldibenzo[b,i]-1,4,8,11-tetraazacyclotetradecane in PVC matrix	V.K. Gupta, R. Prasad and A. Kumar
387-392	Electrooxidation of Mn(II) to MnO₂ on graphite fibre electrodes	M.M.E. Duarte, A.S. Pilla and C.E. Mayer
393-401	A study of copper deposition in the presence of Group-15 elements by cyclic voltammetry and Auger-electron spectroscopy	J. Brent Hiskey and Y. Maeda
403-410	Anisotropic copper etching with monoethanolamine-complexed cupric ion solutions	C-W. Shih, Y-Y. Wang and C-C. Wan
411-417	The effect of corrugated membranes on salt splitting	N. Tzanetakis, W.M. Taama, K. Scott and R.J.J. Jachuck
419-429	Electrooxidation of methanol at platinum–ruthenium catalysts prepared from colloidal precursors: Atomic composition and temperature effects	L. Dubau, C. Coutanceau, E. Garnier, J-M. Léger and C. Lamy
431-441	Influence of agarose on the electrochemical behaviour of the silver and platinum aqueous acid electrolyte interface	M.A. Pasquale, S.L. Marchiano, A.E. Bolzán and A.J. Arvia
443-446	Electroreduction of oxygen on mercury in the presence of titanium silicalite, TS-1	R. Chithra and R. Renuka
447-450	Electrochemical reduction of CO₂ at Pb- and Sn-electrodes in a fixed-bed reactor in aqueous K₂CO₃ and KHCO₃ media	F. Köleli, T. Atilan, N. Palamut, A.M. Gizir and R. Aydin, et al.
451-455	Calendar

Volume 33, Number 6 / June 2003

457-463	Electrochemical investigations on the influence of electrolyte composition of Watts baths with special regard to throwing power	S. Wehner, A. Bund, U. Lichtenstein, W. Plieth and W. Dahms, et al.
465-473	Electropolymerization of aniline on carbonized polyacrylonitrile aerogel electrodes: applications for supercapacitors	H. Talbi, P.-E. Just and L.H. Dao
475-481	Electroconductive coatings on porous ceramic supports	B.J. Bladergroen, A. Maluleke and V.M. Linkov
483-489	Electrochemical reduction of As(III) and As(V) in acidic and basic solutions	D. Bejan and N.J. Bunce
491-496	Electrochemical properties of Li ion polymer battery with gel polymer electrolyte based on polyurethane	H-S. Kim, G-Y. Choi, S-I. Moon and S-P. Kim
497-504	Effect of copper additive on Zr_0.9Ti_0.1V_0.2Mn_0.6Cr_0.05Co_0.05Ni_1.2 alloy anode for nickel–metal hydride batteries	B. Hariprakash, S.K. Martha and A.K. Shukla
505-514	Effects of a fuel cell test on the structure of irradiation grafted ion exchange membranes based on different fluoropolymers	T. Kallio, K. Jokela, H. Ericson, R. Serimaa and G. Sundholm, et al.
515-518	Preparation and electrochromic properties of V–Nb mixed-oxide films by evaporation	W. Chen, Y. Kaneko and N. Kinomura
519-524	Behaviour of multicomponent lead–tin alloys under cathodic polarization in a sodium hydroxide melt	A.A. Omelchuk, O.G. Zarubitskii, V.P. Opanasyuk, N.F. Zakharchenko and V.Ye. D'Yakov
525-532	Electroorganic reactions. Part 57.^† DDQ mediated anodic oxidation of 2-methyl- and 2-benzylnaphthalenes	J.H.P. Utley and G.G. Rozenberg
533-540	Electroactive polymer films for stainless steel corrosion protection	P. Herrasti, P. Ocón, A. Ibáñez and E. Fatás
541-547	Electrocatalytic hydrogenation of cyclohexanone: Simple dynamic cell design	P. Dubé, F. Kerdouss, F. Laplante, P. Proulx and L. Brossard, et al.
549-552	Calendar

Volume 33, Number 7 / July 2003

553-561	An EXAFS investigation of molybdate-based conversion coatings	J.A. Wharton, D.H. Ross, G.M. Treacy, G.D. Wilcox and K.R. Baldwin
563-569	Ohmic interelectrode voltage drop in alumina reduction cells	H. Vogt and H.-D. Kleinschrodt
571-576	Calculation of the oxygen potential profile across solid-state electrochemical cells	R. Singh and K.T. Jacob
577-587	Electrodiffusion detection of the near-wall flow reversal in liquid films at the regime of solitary waves	J. Tihon, V. Tovchigrechko, V. SobolíK and O. Wein
589-595	γ-Butyrolactone-ethylene carbonate based electrolytes for lithium-ion batteries	A. Chagnes, H. Allouchi, B. Carré, G. Odou and P. Willmann, et al.
597-605	Electroplating of copper onto a preanodized 7005Al/Al₂O_3(P) metal matrix composite	J-C. Lin, W-D. Jehng and S-L. Lee
607-612	Structural and electrochemical characterization of mechanochemically synthesized calcium zincate as rechargeable anodic materials	X-M. Zhu, H-X. Yang, X-P. Ai, J-X. Yu and Y-L. Cao
613-617	Electrochemical hydrogen permeation on steel sheets with in situ electrodeposition of a Pd layer at the exit side	L. Péter, E. Szuűcs, L. Filák, B. Veroő and H. Schneider
619-625	Effects of the stoichiometric ratio of aluminium and manganese on electrochemical properties of hydrogen storage alloys	M.-S. Wu, H.-R. Wu, Y.-Y. Wang and C.-C. Wan
627-633	Electrodeposition of noncrystalline cobalt–tungsten alloys from citrate electrolytes	M.A.M. Ibrahim, S.S. Abd El Rehim and S.O. Moussa
635-642	Effect of nucleation mode on the morphology and texture of electrodeposited zinc	K. Raeissi, A. Saatchi and M.A. Golozar
643-646	Enrichment of ⁴¹K isotope in potassium formed on and in a rhenium electrode during plasma electrolysis in K₂CO₃/H₂O and K₂CO₃/D₂O solutions	T. Ohmori, H. Yamada, S. Narita, T. Mizuno and Y. Aoki
647-650	Electrocoagulation and recovery of tannins from tree barks	S. Chowwanapoonpohn, S. Chewchanwuttiwong, M.J. Garson and D. Buddhasukh
651-653	Calendar

Volume 33, Number 8 / August 2003

655-663	Electrosynthesis of hydrogen peroxide in acidic solutions by mediated oxygen reduction in a three-phase (aqueous/organic/gaseous) system Part I: Emulsion structure, electrode kinetics and batch electrolysis	E.L. Gyenge and C.W. Oloman
665-674	Electrosynthesis of hydrogen peroxide in acidic solutions by mediated oxygen reduction in a three-phase (aqueous/organic/gaseous) system Part II: Experiments in flow-by fixed-bed electrochemical cells with three-phase flow	E.L. Gyenge and C.W. Oloman
675-684	A mathematical model of multiple ion transport across an ion-selective membrane under current load conditions	V. Fíla and K. Bouzek
685-692	Kinetics of copper electrodeposition in the presence of triethyl-benzyl ammonium chloride	S. Varvara, L. Muresan, I.C. Popescu and G. Maurin
693-701	Anodic oxidation of 2,4-dihydroxybenzoic acid for wastewater treatment	R.H. De Lima Leite, P. Cognet, A.-M. Wilhelm and H. Delmas
703-708	AISI 304 L stainless steel decontamination by a corrosion process using cerium IV regenerated by ozone Part I: Study of the accelerated corrosion process	J.P. Caire, F. Laurent, S. Cullie, F. Dalard and J.M. Fulconis, et al.
709-715	AISI 304 L stainless steel decontamination by a corrosion process using cerium IV regenerated by ozone Part II: Process optimization	J.P. Caire, S. Cullie, F. Dalard, J.M. Fulconis and H. Delagrange
717-723	Comparison of pH 6 potentials, alkaline potentials and initial open circuit voltages of electrolytic MnO₂	T.N. Andersen, G.A. Mischler and W.F. Howard
725-732	Multiple-step constant current density electrodeposition of continuous metal material with high porosity	D.L. Wang, C.S. Dai, N. Wu, Z.H. Jiang and J. Li
733-739	The effect of current density on properties of electrodeposited nanocrystalline nickel	F. Ebrahimi and Z. Ahmed
741-745	Paired electrooxidation IV. Decarboxylation of sodium gluconate to D-arabinose	C-F. Chou and T-C. Chou
747-754	Electrodeposition of Au–Sn alloys from acid Au(III) baths	B. Bozzini, A. Fanigliulo, G. Giovannelli, S. Natali and C. Mele
755-758	Purification of carbon nanotubes using anodic oxidation in a solid polymer electrolyte (SPE) cell	W. Chen, J. Li, L. Liu, Z. Jia and Y. Yu, et al.
759-762	Simultaneous determination of dopamine and serotonin in the presence of ascorbic acid and uric acid at poly(o-phenylenediamine) modified electrode	T. Selvaraju and R. Ramaraj
763-766	Calendar

Volume 33, Number 9 / September 2003

767-775	An electrochemical study of the dissolution of gold in thiosulfate solutions Part I: Alkaline solutions	Suchun Zhang and M.J. Nicol
777-784	Preparation of alkaline PVA-based polymer electrolytes for Ni–MH and Zn–air batteries	C-C. Yang and S-J. Lin
785-793	The electroformation of Zr metal, Zr–Al alloy and carbon films on ceramic	M. Kawase and Y. Ito
795-805	Electrochemical characterization of galvanically coupled single phases and nanocrystalline NdFeB-based magnets in NaCl solutions	A.A. El-Moneim and A. Gebert
807-816	Electroless Ni–P composite coatings	J.N. Balaraju, T.S.N. Sankara Narayanan and S.K. Seshadri
817-822	Potential dependent selective dissolution of Ti–6Al–4V and laser treated Ti–6Al–4V in acid/chloride media	M.M. Khaled
823-830	Void-free anisotropic deposition for IC interconnect with polyethylene glycol as the single additive based on uneven adsorption distribution	B.-H. Wu, C.-C. Wan and Y.-Y. Wang
831-834	Thermally coated Ti/TiO₂ as cathode material for the synthesis of succinic and dihydrophthalic acids	C.J. Kennedy and A.J. Rethinam
835-838	Calendar

Volume 33, Number 10 / October 2003

839-851	Mathematical simulation of a vertically moving particle bed electrochemical cell	K. Bouzek and H. Bergmann
853-862	Simultaneous recovery of Pb and PbO₂ from battery plant effluents. Part II	N.P. Brandon, D. Pilone, G.H. Kelsall and Q. Yin
863-873	Laminar and turbulent mass transfer simulations in a parallel plate reactor	G. Nelissen, B. Van Den Bossche, J. Deconinck, A. Van Theemsche and C. Dan
875-884	Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions	A. Mahmoud, L. Muhr, S. Vasiluk, A. Aleynikoff and F. Lapicque
885-892	Electrochemical treatment of wastewater containing phenolic compounds: oxidation at boron-doped diamond electrodes	A.M. Polcaro, A. Vacca, S. Palmas and M. Mascia
893-899	Hydrodehalogenation of 2,4-dibromophenol by electrochemical reduction	H. Cheng, K. Scott and P.A. Christensen
901-908	Electrochemical reduction of indigo in fixed and fluidized beds of graphite granules	A. Roessler, D. Crettenand, O. Dossenbach and P. Rys
909-915	Effect of crystal structure on the electrochemical behaviour of synthetic semiconductor diamond: Comparison of growth and a nucleation surfaces of a coarse-grained polycrystalline film	Yu.V. Pleskov, Yu.E. Evstefeeva, M.D. Krotova, V.G. Ralchenko and I.I. Vlasov, et al.
917-927	Electrochemical oxidation of several chlorophenols on diamond electrodes Part I. Reaction mechanism	P. Cañizares, J. García-Gómez, C. Sáez and M.A. Rodrigo
929-932	Accelerated degradation testing of gas diffusion electrodes for the chlor-alkali process	M. Sugiyama, K. Saiki, A. Sakata, H. Aikawa and N. Furuya
933-937	Catalytic epoxidation with electrochemically in situ generated hydrogen peroxide	Andreas Zimmer, Damian Mönter and Wladimir Reschetilowski
939-949	Development of an integrated process for electrochemical reaction and chromatographic SMB-separation	M. Michel, H. Schmidt-Traub, R. Ditz, M. Schulte and Joachim Kinkel, et al.
951-957	Selective oxidation of pentachlorophenol on diamond electrodes	L. Codognoto, S.A.S. Machado and L.A. Avaca
959-967	Influence of surface inhomogeneities of boron doped CVD-diamond electrodes on reversible charge transfer reactions	D. Becker and K. Jüttner
969-977	Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology	J. Jörissen

Volume 33, Number 11 / November 2003

979-987	Mass transport in the cathode of a free-breathing polymer electrolyte membrane fuel cell	T. Mennola, M. Noponen, M. Aronniemi, T. Hottinen and M. Mikkola, et al.
989-993	Neutralization of used Li batteries: Anodic dissolution of the iron–nickel alloy positive pins of Li–SOCl₂ batteries in seawater	E. Zinigrad, Y. Gofer, D. Aurbach and P. Dan
995-1000	Structural characterization and electrocatalytic properties of Au₃₀Zr₇₀ amorphous alloy obtained by rapid quenching	K. Brunelli, M. Dabalà, R. Frattini and M. Magrini
1001-1009	Investigation of electroless plating of Ni–W–P alloy films	N. Du and M. Pritzker
1011-1016	Exploration of molten hydroxide electrochemistry for thermal battery applications	M.H. Miles
1017-1024	Anodic behaviour of arsenopyrite and cathodic reduction of ferrate(VI) and oxygen in alkaline solutions	M.J. Nicol and N. Guresin
1025-1033	A thermodynamic approach to calculate the yttria-stabilized zirconia pH sensor potential	W. Zhang and E.A. Charles
1035-1042	Electrodeposition and characterization of thin layers of Zn–Co alloys obtained from glycinate baths	S.M. Rashwan, A.E. Mohamed, S.M. Abdel-Wahaab and M.M. Kamel
1043-1047	Electrical conductivity and density of NiSO₄/H₂SO₄ solutions in the range of modern nickel electrorefining and electrowinning electrolytes	R. Wu, M. Oliazadeh and A.M Alfantazi
1049-1055	Electrochemical decomposition of ppb level trihalomethane in tap water	N. Sonoyama, S. Seike, T. Sueoka and T. Sakata
1057-1061	Lead-coated glass fibre mesh grids for lead–acid batteries	J. Wang, Z.P. Guo, S. Zhong, H.K. Liu and S.X. Dou
1063-1068	Hydrophobic interfacing layers for improvement of corrosion protection by polymeric coatings	S-Y. Zhang, Y. Kong, Z-S. Zhang and X-Y. Zhang
1069-1075	Electrochemical study and complete factorial design of Toluidine Blue immobilized on SiO₂/Sb₂O₃ binary oxide	E.S. Ribeiro, S.L.P. Dias, S.T. Fujiwara, Y. Gushikem and R.E. Bruns
1077-1084	Electrodeposition of antimony in a water-stable 1-ethyl-3-methylimidazolium chloride tetrafluoroborate room temperature ionic liquid	M-H. Yang and I-W. Sun
1085-1092	Electrodeposition of Co–Cu alloy coatings from glycinate baths	A.E. Mohamed, S.M. Rashwan, S.M. Abdel-Wahaab and M.M. Kamel
1093-1098	The use of electrochemical noise measurements to detect bad copper electrorefining conditions	B. Veilleux, A.-M. Lafront, E. Ghali and P.R. Roberge
1099-1101	Poly(acrylonitrile-methyl methacrylate) as a non-fluorinated binder for the graphite anode of Li-ion batteries	S.S. Zhang, K. Xu and T.R. Jow
1103-1107	Calendar

Volume 33, Number 12 / December 2003

1107-1123	Effects of process conditions and electrode material on reaction pathways for carbon dioxide electroreduction with particular reference to formate formation	R.P.S. Chaplin and A.A. Wragg
1125-1135	The role of defects, or active states, in surface electrochemistry with particular reference to gold in neutral solution	L.D. Burke, A.M. O'Connell and A.P. O'Mullane
1137-1142	A nonlinear kinetic model introduced for the corrosion inhibitive properties of some organic inhibitors	S. Martinez and M. Metikoš-Huković
1143-1153	Effect of pulse plating on composition of Sn–Pb coatings deposited in fluoroborate solutions	Yongdong Liu and Mark Pritzker
1155-1161	Electrodeposition of copper–zinc alloys in pyrophosphate-based electrolytes	L.F. Senna, S.L. Díaz and L. Sathler
1163-1168	Hector bases – a new class of heterocyclic corrosion inhibitors for mild steel in acid solutions	M.A. Quraishi and R. Sardar
1169-1173	Electrochemical properties of layered Li[Ni_1/2Mn_1/2]O₂ cathode material synthesised by ultrasonic spray pyrolysis	S.H. Park, Y.S. Lee, Y. Sato and Y.-K. Sun
1175-1182	Corrosion inhibition of mild steel by benzotriazole derivatives in acidic medium	S. Tamil Selvi, V. Raman and N. Rajendran
1183-1189	The performance of a migrating corrosion inhibitor suitable for reinforced concrete	W. Morris, A. Vico and M. Vázquez
1191-1198	Methanol oxidation at Pt/MoO_x/MoSe₂ thin film electrodes prepared with exfoliated MoSe₂	H. Bolivar, S. Izquierdo, R. Tremont and C.R. Cabrera
1199-1204	Effect of electrolysis conditions on the deposition of silver–bismuth alloys	I. Krastev, T. Valkova and A. Zielonka
1205-1210	Electrochemical reduction of carbon dioxide at ruthenium dioxide deposited on boron-doped diamond	Nicolae Spataru, Kenichi Tokuhiro, Chiaki Terashima, Tata N. Rao and Akira Fujishima
1211-1215	Electrochemical oxidation of p-chlorophenol on SnO₂–Sb₂O₅ based anodes for wastewater treatment	Carmem L.P.S. Zanta, Pierre-Alan Michaud, Christos Comninellis, Adalgisa R. De Andrade and Julien. F.C. Boodts
1217-1222	Reduction of hexavalent chromium using polyaniline films. Effect of film thickness, potential and flow velocity on the reaction rate and polymer stability	L.A.M. Ruotolo and J.C. Gubulin
1223-1231	Electrochemical synthesis of EDOT–ECZ–EDOT copolymer on carbon fiber micro-electrodes	Esma Sezer, A.H. Sezai Saraç and Elif Altürk Parlak
1233-1237	Effect of resistivity on the corrosion mechanism of mild steel in sodium sulfate solutions	S. Arzola, M.E. Palomar-Pardavé and J. Genesca
1239-1240	Water phase sensitization of nanoporous TiO₂ film	T. Hoshi, T. Nomura, H. Shiroishi and M. Kaneko
1241-1242	Electroless Ni-P composite coatings
1243-1245	Author Index
1247-1250	Index to Volume 33 (2003)

Volume 34, Number 1 / January 2004

1-7	Electrodeposition of lead dioxide on carbon substrates from a high internal phase emulsion (HIPE)	P.J. Blood, I.J. Brown and S. Sotiropoulos
9-17	Relation between potential and catalytic activity of rhodium in propylene combustion	G. Fóti, I. Bolzonella, D. Bachelin and CH. Comninellis
19-30	Electromagnetic control of electroplating of a cylinder in forced convection	Pedro Olivas, Antoine Alemany and Fritz H. Bark
31-36	Water balance in a free-breathing polymer electrolyte membrane fuel cell	Tuomas Mennola, Matti Noponen, Tanja Kallio, Mikko Mikkola and Tero Hottinen
37-46	Electrochemical behaviour of galena (PbS) in aqueous nitric acid and perchloric acid solutions	Yu. Mikhlin, A. Kuklinskiy, E. Mikhlina, V. Kargin and I. Asanov
47-53	Selective dissolution of brass in salt water	F.M. Al-Kharafi, B.G. Ateya and R.M. Abd Allah
55-59	Effect of silver catalyst on the activity and mechanism of a gas diffusion type oxygen cathode for chlor-alkali electrolysis	O. Ichinose, M. Kawaguchi and N. Furuya
61-66	Preparation of Pt–Ru bimetallic anodes by galvanostatic pulse electrodeposition: characterization and application to the direct methanol fuel cell	C. Coutanceau, A.F. Rakotondrainibé, A. Lima, E. Garnier and S. Pronier, et al.
67-70	Electrochemical investigations of pitting corrosion behaviour of type UNS S31603 stainless steel in thiosulfate-chloride environment	A.I. Almarshad and D. Jamal
71-77	A photoelectrochemical and spectroscopic investigation of oxide layers on AISI 301 in sulfate solutions at different pH	S. Maffi, B. Bozzini, A. Fanigliulo and L. Peraldo Bicelli
79-85	Structure and properties of electrodeposited silver–bismuth alloys	I. Krastev, T. Valkova and A. Zielonka
87-94	Electrochemical oxidation of several chlorophenols on diamond electrodes: Part II. Influence of waste characteristics and operating conditions	P. Cañizares, J. García-Gómez, C. Sáez and M.A. Rodrigo
95-102	Effect of PgTPhPBr on the electrochemical and corrosion behaviour of 304 stainless steel in H₂SO₄ solution	A.A. Hermas, M.S. Morad and M.H. Wahdan
103-109	Back extraction of platinum metals from liquid membranes in an electric field	L. Kulikova, O. Petrichenko, V. Serga and A. Jansone
111-117	Combined adsorption and electrochemical processes for the treatment of acidic aqueous phenol wastes	P. Cañizares, J. Lobato, J. García-Gómez and M.A. Rodrigo
119-125	Effects of ceric ammonium nitrate (CAN) additive in HNO₃ solution on the electrochemical behaviour of ruthenium for CMP processes	W.-J. Lee, H.-S. Park, S.-I. Lee and H.-C. Sohn

Volume 34, Number 2 / February 2004

127-136	Electrocatalytic hydrogenation of alkyl-substituted phenols in aqueous solutions at a Raney nickel electrode in the presence of a non-micelle-forming cationic surfactant	H. Ilikti, N. Rekik and M. Thomalla
137-145	Membrane stability studies for vanadium redox cell applications	Theresa Sukkar and Maria Skyllas-Kazacos
147-150	Voltammetric anodic dissolution (VAD) applied to the quantitative analysis of coating discontinuities – influence of electrodeposition parameters	H.A. Ponte, A.C.T. Gomes, A.M. Maul and M.J.J.S. Ponte
151-158	Dissolution from electrodeposited copper–cobalt–copper sandwiches	S.M.S.I. Dulal, E.A. Charles and S. Roy
159-168	Electrochemical impedance spectroscopy of the alkaline manganese dioxide electrode	Scott W. Donne and John H. Kennedy
169-174	The diffusion coefficient of Cu(II) ions in sulfuric acid–aqueous and methanesulfonic acid–methanol solutions	S.J. MacHardy and L.J.J. Janssen
175-179	Electrochemically deposited Ni + WC composite coatings obtained under constant and pulsating current regimes	B. Jugović, J. Stevanović and M. Maksimović
181-185	Study of a high power density sodium polysulfide/bromine energy storage cell	S.H. Ge, B.L. Yi and H.M. Zhang
187-190	Electrochemical properties of nanosize Sn-coated graphite anodes in lithium-ion cells	G.X. Wang, Jane Yao, Jung-Ho Ahn, H.K. Liu and S.X. Dou
191-195	Reduction of hexavalent chromium at a polypyrrole-coated aluminium electrode: Synergistic interactions	Kenneth G. Conroy and Carmel B. Breslin
197-204	Differential pulse voltammetry studies of heavy metal fluoride melts	D.R. Macfarlane, Zhiping Zhou and P.J. Newman
205-215	Two-dimensional analysis of PEM fuel cells	B. Hum and Xianguo Li
217-224	A three-dimensional numerical simulation of the transport phenomena in the cathodic side of a PEMFC	J.J. Hwang, C.K. Chen, R.F. Savinell, C.C. Liu and J. Wainright
225-233	Voltammetric and Raman microspectroscopic studies on artificial copper pits grown in simulated potable water	A.G. Christy, A. Lowe, V. Otieno-Alego, M. Stoll and R.D. Webster
235-240	Composite nickel hydroxide – polyelectrolyte films prepared by cathodic electrosynthesis	I. Zhitomirsky
241-244	Cyclic voltammetric study of arsenic reduction and oxidation in hydrochloric acid using a Pt RDE	Z. Wei and P. Somasundaran
245-248	Calendar

Volume 34, Number 3 / March 2004

249-254	Electrochemical oxidation of aniline at boron-doped diamond electrodes	M. Mitadera, N. Spataru and A. Fujishima
255-262	Current distribution measurements in a PEFC with net flow geometry	M. Noponen, J. Ihonen, A. Lundblad and G. Lindbergh
263-270	Synergistic effects of novel battery manufacturing processes for lead/acid batteries: Part II: Mechanistic studies	A. Rochliadi, R. De Marco and A. Lowe
271-276	Effect of N⁺ ion implantation on the corrosion behaviour of Ti—6Al—7Nb and Ti—5Al—2Nb—1Ta orthopaedic alloys in Hanks solution	S. Gokul Lakshmi, S. Tamilselvi, N. Rajendran and D. Arivuoli
277-281	On the observation of inductive high-frequency impedance behaviour during the electrodeposition of Au—Sn alloys	Benedetto Bozzini, Claudio Mele and Ivonne Sgura
283-290	An evaluation of electrolytic repair of discontinuous PVD copper seed layers in damascene vias	J.H. Sukamto, E. Webb, T. Andryushchenko and J. Reid
291-300	Integration of thin electroless copper films in copper interconnect metallization	E. Webb, C. Witt, T. Andryuschenko and J. Reid
301-304	Gel polymer electrolytes based on a novel quaternary ammonium salt for dye-sensitized solar cells	J. Kang, W. Li, X. Wang, Y. Lin and X. Li, et al.
305-314	Study of anodic layers and their effects on electropolishing of bulk and electroplated films of copper	J. Huo, R. Solanki and J. McAndrew
315-321	Electrodeposition, composition and structure of Zn—Cr alloys	Tz. Boiadjieva, D. Kovacheva, K. Petrov, S. Hardcastle and A. Sklyarov, et al.
323-330	Electrode reaction of the Np³⁺/Np couple at liquid Cd and Bi electrodes in LiCl–KCl eutectic melts	O. Shirai, K. Uozumi, T. Iwai and Y. Arai
331-335	Characterization of some aluminium alloys for application as anodes in alkaline batteries	S. Zein El Abedin and A.O. Saleh
337-343	Characterization of different allotropic forms of calcium carbonate scales on carbon steel by electrochemical impedance spectroscopy	J. Marín-Cruz, R. Cabrera-Sierra, M.A. Pech-Canul and I. González
345-348	An X-ray diffraction and transmission electron microscopy study of Pt—Ru fuel cell catalysts before and after operation	C. Roth, N. Martz and H. Fuess
349-350	Diffusion coefficients of Ta⁵⁺ and Ti⁴⁺ ions in methanesulfonic acid—methanol solutions	L.J.J. Janssen
351-355	Calendar

Volume 34, Number 4 / April 2004

357-369	Current approaches to the electrochemical synthesis of organo-fluorine compounds	M. Noel and V. Suryanarayanan
371-374	Indirect electrooxidation of crotyl and cinnamyl alcohol using a Ni(OH)₂ electrode	A.J. Rethinam and C.J. Kennedy
375-381	Electrochemical removal of arsenic from technical grade phosphoric acid	J.M. Bisang, F. Bogado, M.O. Rivera and O.L. Dorbessan
383-389	Electrochemical properties of cathode materials LiNi_1−yCo_yO₂ synthesized using various starting materials	M.Y. Song, H. Rim and E. Bang
391-396	Chelating ionophores based electrochemical sensor for Hg(II) ions	L.P. Singh and J.M. Bhatnagar
397-401	Development of a bath for codeposition of copper and platinum	J. Obert and S.B. Lalvani
403-408	Metallic-lithium, LiFePO₄-based polymer battery using PEO—ZrO₂ nanocomposite polymer electrolyte	A. D'Epifanio, F. Serraino Fiory, S. Licoccia, E. Traversa and B. Scrosati, et al.
409-415	Development of LSM/YSZ composite cathode for anode-supported solid oxide fuel cells	Y.J. Leng, S.H. Chan, K.A. Khor and S.P. Jiang
417-426	Behaviour, modelling and simulation of a pulsed three-dimensional radial electrode with continuous solid flow: Part I	F.J. Garfias-Vasquez, P. Duverneuil and G. Lacoste
427-438	The role of the WO_x ad-component to Pt and PtRu catalysts in the electrochemical CH₃OH oxidation reaction	L.X. Yang, C. Bock, B. MacDougall and J. Park
439-446	Development of anode catalysts for a direct ethanol fuel cell	F. Vigier, C. Coutanceau, A. Perrard, E.M. Belgsir and C. Lamy
447-453	An oblique rotating barrel electrochemical reactor for removal of copper ions from wastewater	A.A. Al-Shammari, S.U. Rahman and D.-T. Chin
455-459	Effects of conductive polyaniline (PANI) preparation and platinum electrodeposition on electroactivity of methanol oxidation	H.H. Zhou, S.Q. Jiao, J.H. Chen, W.Z. Wei and Y.F. Kuang

Volume 34, Number 5 / May 2004

461-467	Effect of Preparation Conditions of Pt/C Catalysts on Oxygen Electrode Performance in Proton Exchange Membrane Fuel Cells	J.H. Tian, F.B. Wang, ZH.Q. Shan, R.J. Wang and J.Y. Zhang
469-476	Design and Modelling of a Dialysis Membrane Electrochemical Reactor (D-MER) for Oxidoreductase-Catalysed Synthesis	K. Délécouls-Servat, A. Bergel and R. Basseguy
477-486	Transmission Line Modeling of the Manganese Dioxide Electrode in Concentrated KOH Electrolytes	Scott W. Donne and John H. Kennedy
487-493	The Synergistic Effect Between Phosphonocarboxylic Acid Salts and Fatty Amines for the Corrosion Protection of a Carbon Steel	N. Ochoa, F. Moran and N. Pébère
495-500	Self-Assembly of Metalloporphyrin-L-Cysteine Modified Gold Electrode	S. Wang, D. Du and X. Xu
501-506	Electrochemical Removal of Tin from Dilute Aqueous Sulfate Solutions using a Rotating Cylinder Electrode of Expanded Metal	J.C. Bazan and J.M. Bisang
507-516	Effect of Heat-Treatment on the Mechanism and Kinetics of the Hydrogen Evolution Reaction on Ni—P + TiO₂ + Ti Electrodes	B. Łosiewicz, A. Budniok, E. Rówiński, E. Łągiewka and A. Lasia
517-524	Electrochemical Study of Co-Based Alloys in Simulated Physiological Solution	A. Kocijan, I. Milošev, D.K. Merl and B. Pihlar
525-531	Fabrication and Corrosion Behaviour of Platinum-Coated Titanium Electrodes from Low Temperature Molten Salt Electrolytes	W-H. Wu, C-C. Lin and C-C. Yang
533-543	Effects of Thiourea on Anodic Dissolution of Au and Surface Oxidation Behaviour in aq HClO₄ Studied by Means of an EQCN	M. Tian and B.E. Conway
545-550	Protective Properties of An Inhibitor Layer Formed on Copper in Neutral Chloride Solution	H. Otmačić, J. Telegdi, K. Papp and E. Stupnišek-Lisac
551-556	Electrochemical Degradation of Nitroaromatic Wastes in Sulfuric Acid Solutions: Part I	N.E. Jiménez Jado, C. Fernández Sánchez and J.R. Ochoa Gómez
557-561	Calendar

Volume 34, Number 6 / June 2004

563-576	Review in Applied Electrochemistry. Number 54 Recent Developments in Polymer Electrolyte Fuel Cell Electrodes	E. Antolini
577-582	Development of W/WO₃ Sensors for the Measurement of pH in An Emulsion Polymerization System	D.D. Macdonald, J. Liu and D. Lee
583-589	Electrooxidation of Aqueous p-Methoxyphenol on Lead Oxide Electrodes	C. Borrás, P. Rodríguez, T. Laredo, J. Mostany and B.R. Scharifker
591-599	Corrosion Mitigation of Mild Steel by New Rare Earth Cinnamate Compounds	F. Blin, S.G. Leary, K. Wilson, G.B. Deacon and P.C. Junk, et al.
601-605	Voltammetric and Morphological Characterization of Heteropolyanions and Copper Co-Electrodeposition by In Situ AFM	T. Hernández-Pérez, S. Holguín and M. Rivera
607-615	Silver Electrodeposition from AgNO₃ Solutions Containing Organic Additives: Electrodeposition from Binary Water–Methanol Solvent Systems in the Presence of Tartaric Acid	G.M. Zarkadas, A. Stergiou and G. Papanastasiou
617-622	Rapid Reduction of U(VI) on Activated Platinum Wire Gauze Electrode for the Primary Coulometric Determination of Uranium	N. Gopinath, N.N. Mirashi, K. Chander and S.K. Aggarwal
623-629	Corrosion Behaviour of Niobium in Sodium Hydroxide Solutions	A. Robin
631-636	Influence of Dispersed Particulates on Mass Transport in Cross-Corrugated Structures	K. Scott and J. Lobato
637-641	Production of Dense Yttria-Stabilized Zirconia Thin Films by Dip-Coating for IT-SOFC Application	Yonglian Zhang, Jianfeng Gao, Guangyao Meng and Xingqin Liu
643-651	Application of Combinatorial Methodologies to the Synthesis and Characterization of Electrolytic Manganese Dioxide	M. Devenney, S.W. Donne and S. Gorer
653-658	Photocatalytic and Photoelectrocatalytic Performance of 1% Pt Doped TiO₂ for the Detoxification of Water	H. Selcuk, W. Zaltner, J.J. Sene, M. Bekbolet and M.A. Anderson

Volume 34, Number 7 / July 2004

659-669	Electrochemical Corrosion Behaviour of 90—10 Cu—Ni Alloy in Chloride-Based Electrolytes	G. Kear, B.D. Barker, K. Stokes and F.C. Walsh
671-680	Segmented thin-gap flow cells for process intensification in electrosynthesis	S. Rode, S. Altmeyer and M. Matlosz
681-685	Kinetics of the Chemical Dissolution of Vanadium Pentoxide in Acidic Bromide Solutions	Maria Skyllas-Kazacos and Yuni Limantari
687-692	Performance of Cu₂O/ZnO Solar Cell Prepared By Two-Step Electrodeposition	J. Katayama, K. Ito, M. Matsuoka and J. Tamaki
693-696	Aldimines — Effective Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution	A. Subramania, N.T. Kalyana Sundaram, R. Sathiya Priya, K. Saminathan and V.S. Muralidharan, et al.
697-704	Piperidines As Corrosion Inhibitors for Iron in Hydrochloric Acid	K.F. Khaled, K. Babi´-Samardžija and N. Hackerman
705-714	Effects of Nafion^® Dehydration in PEM Fuel Cells	M. Ciureanu
715-722	Preformed Boehmite Nanoparticles As Coating Materials for Long-Cycling LiCoO₂	G.T.K. Fey, Z.X. Weng, J.G. Chen, C.Z. Lu and T.P. Kumar, et al.
723-727	Self Linear Polarization Resistance-Theory and Examples	R.D. Klassen and P.R. Roberge
729-734	Characterization of Acrylic Hydrogels by Open Circuit Potential Monitoring	J.P. Wilburn, M. Ciobanu and D.A. Lowy
735-749	Studies of the Hydrogen Evolution Reaction on Raney Nickel—Molybdenum Electrodes	L. Birry and A. Lasia
751-756	Uniform Thin Film Electrodeposition onto Large Circular Wafer Substrates	Hector Ortiz-Ibarra and J. Antonio Medina
757-762	Electroreduction-Oxidation and Quantitative Determination of CO₂ on A New SPE-Based System	Jun Liu, Heqing Yan, Yifu Yang, Kangli Wang and E'feng Wang
763-767	Calendar

Volume 34, Number 8 / August 2004

797-805	Assessment of the Wettability of Porous Electrodes for Lithium-Ion Batteries	Mao-Sung Wu, Tzu-Ling Liao, Yung-Yun Wang and Chi-Chao Wan
763-770	The Design and Usage of a Visual Direct Methanol Fuel Cell	Joakim Nordlund, Cyril Picard, Erik Birgersson, Michael Vynnycky and Göran Lindbergh
771-780	Measurement of Polarization Parameters Impacting on Electrodeposit Morphology. II: Conventional Zinc Electrowinning Solutions	P.A. Adcock, A. Quillinan, B. Clark, O.M.G. Newman and S.B. Adeloju
857-866	Development of an Electrodeposited Nanomold from Compositionally Modulated Alloys	Che-Yih Lim, Q. Huang, X. Xie, A. Safir and S.A. Harfenist, et al.
849-856	Electrochemical Aspects of Pyrrhotite and Pentlandite in Relation to their Flotation with Xanthate. Part-I: Cyclic Voltammetry and Rest Potential Measurements	A. Khan and S. Kelebek
781-796	Electrocatalytic Reduction of Nitrate on Activated Rhodium Electrode Surfaces	Philip M. Tucker, Michael J. Waite and Brian E. Hayden
841-848	Preparation and Characterisation of Electrodeposited Ni—Cu/Cu Multilayers	M. Alper, M.C. Baykul, L. Péter, J. Tóth and I. Bakonyİ
833-839	Synergistic Influence of Poly(4-Vinylpyridine) and Potassium Iodide on Inhibition of Corrosion of Mild Steel in 1M HCl	L. Larabi, Y. Harek, M. Traisnel and A. Mansri
815-822	Pyrrole Electropolymerization on Copper and Brass in a Single-Step Process from Aqueous Solution	M. Bazzaoui, J.I. Martins, E.A. Bazzaoui, T.C. Reis and L. Martins
807-813	Modeling of the Current Distribution in Aluminum Anodization	Rohan Akolkar, Uziel Landau, Harry Kuo and Yar-Ming Wang
823-831	The Influence of Ni Content on the Stability of Copper—Nickel Alloys in Alkaline Sulphate Solutions	Khaled M. Ismail, Ahlam M. Fathi and Waheed A. Badawy
867-872	Calendar

Volume 34, Number 9 / September 2004

873-878	Corrosion Behaviour of Ti–6Al–4V Alloy in Concentrated Hydrochloric and Sulphuric Acids	A.S. Mogoda, Y.H. Ahmad and W.A. Badawy
879-884	The Effect of Aluminum Ions on the DC Etching of Aluminum Foil	Jong-Ho Ryu, Jong Hyun Seo, Jae-Han Jeong, Sung-Kap Kim and Dong Nyung Lee
885-890	Electrochemical Insertion of Lithium into Graphite–Zinc Composites	A. Dailly, J. Ghanbaja, P. Willmann and D. Billaud
891-897	Corrosion Protection of Mild Steel by Formation of Iron Oxide Polybithiophene Composite Films	S.A.M. Refaey, F. Taha and H.S. Shehata
899-902	Electrosynthesis of Mg(OH)₂ Coatings on Stainless Steel Substrates	M. Dinamani and P. Vishnu Kamath
903-910	Cathodic Decolourisation of Dyes in Concentrates from Nanofiltration and Printing Pastes	T. Bechtold and A. Turcanu
911-918	Cyclic Voltammetric Studies of Carbon Steel in Deaerated NaHCO₃ Solution	M.M. El-Naggar
919-927	Investigation of the Metal–Oxide Buried Interfacial Zone with Linear Sweep Voltammetry	D.L. Cocke, D.E. Mencer, M.A. Hossain, R. Schennach and M. Kesmez, et al.
929-933	Direct Methanol Fuel Cells Using Thermally Catalysed Ti Mesh	Chan Lim, K. Scott, R.G. Allen and S. Roy
935-943	Electron Transfer Kinetics on Boron-Doped Diamond Part I: Influence of Anodic Treatment	I. Duo, C. Levy-Clement, A. Fujishima and C. Comninellis
945-952	Selective Decomposition of NO in the Presence of Excess O₂ in Electrochemical Cells	X. Wang, Q. Zhao and T. Cai
953-961	Effects of Temperature and Concentration on the Structure and Specific Capacitance of Manganese Oxide Deposited in Manganese Acetate Solution	J.-K. Chang and W.-T. Tsai
963-969	Reduction Characteristics of Iodate Ion on Copper: Application to Copper Chemical Mechanical Polishing	M. Anik
971-974	Calendar

Volume 34, Number 10 / October 2004

975-980	Performance of Methanol Oxidation Catalysts with Varying Pt:Ru Ratio as a Function of Temperature	A.J. Dickinson, L.P.L. Carrette, J.A. Collins, K.A. Friedrich and U. Stimming
981-987	The Bromine Electrode. Part I: Adsorption Phenomena at Polycrystalline Platinum Electrodes	S. Ferro and A. De Battisti
989-995	Influence of the Environment on the Atmospheric Corrosion of Bronze	R. Picciochi, A.C. Ramos, M.H. Mendonça and I.T.E. Fonseca
997-1005	High Rate Anodic Dissolution of 100Cr6 Steel in Aqueous NaNO₃ Solution	T. Haisch, E.J. Mittemeijer and J.W. Schultze
1007-1012	Electrochemical Surface Modification of Aluminium Sheets for Application to Nano-electronic Devices: Anodization Aluminium and Electrodeposition of Cobalt-Copper	T. Ohgai, X. Hoffer, L. Gravier and J.-Ph. Ansermet
1013-1019	Codeposition and Microstructure of Nickel—SiC Composite Coating Electrodeposited from Sulphamate Bath	C.S. Lin and K.C. Huang
1021-1027	Contributions to the Ohmic Drop in the Electrolysis of ZnCl₂ in a Molten Chloride Electrolyte	S.C. Lans, A. Van Sandwijk and M.A. Reuter
1029-1038	A Solid-polymer Electrolyte Direct Methanol Fuel Cell with a Methanol-tolerant Cathode and its Mathematical Modelling	R.K. Raman, G. Murgia and A.K. Shukla
1039-1044	Improved Lead—acid Cells Employing Tin Oxide Coated Dynel Fibres with Positive Active-Material	B. Hariprakash, A.U. Mane, S.K. Martha, S.A. Gaffoor and S.A. Shivashankar, et al.
1045-1055	Cell Configurations for Performance Evaluation in Planar Solid Oxide Fuel Cells	S.P. Jiang
1057-1063	Electrodeposition Behaviour of Cadmium Telluride from 1-ethyl-3-methylimidazolium Chloride Tetrafluoroborate Ionic Liquid	S.-I. Hsiu and I.-W. Sun
1065-1070	Effect of Hot Pressing on the Performance of Direct Methanol Fuel Cells	C. Song and P.G. Pickup
1071-1080	Electrochemical Behaviour of Al, Al—In and Al–Ga–In Alloys in Chloride Solutions Containing Zinc Ions	S. Zein El Abedin and F. Endres
1081-1083	Calendar

Volume 34, Number 11 / November 2004

1085-1091	Characterisation of electrodeposited nanocrystalline Ni–Mo alloys	Elisabeth Chassaing, Nicolas Portail, Anne-france Levy and Guillaume Wang
1093-1101	Characterising nonuniform electrodeposition and electrodissolution using the novel wire beam electrode method	Yong-jun Tan and Kim Yong Lim
1103-1112	In situ analysis of high temperature characteristics of prismatic polymer lithium - ion batteries	Mohamed Mohamedi, Hiroaki Ishikawa and Isamu Uchida
1113-1118	Studies of current and potential distributions on lead-acid batteries. II. Discharge of automotive negative plates	Yi Li, Guodong Zhang and Yonglang Guo
1119-1125	Preparation of rechargeable lithium batteries with poly(methyl methacrylate) based gel polymer electrolyte by in situγ-ray irradiation-induced polymerization	Y. F. Zhou, S. Xie, X. W. Ge, C. H. Chen and K. Amine
1127-1133	A novel cureless pure lead oxide plate for valve-regulated lead-acid batteries	J. Wang, G. X. Wang, Y. Chen, C. Y. Wang and H. K. Liu
1135-1139	Performance of a magnesium–lithium alloy as an anode for magnesium batteries	A. Sivashanmugam, T. Prem kumar, N. G. Renganathan and S. Gopukumar
1141-1145	Corrosion performance of NiAl intermetallic with Mo, Ga and Fe in neutral and alkaline media	A. Albiter, M. A. Espinosa-medina, M. Casales and J. G. Gonzalez-rodriguez
1147-1152	Application of poly(o-phenylenediamine) in rechargeable cells	S. R. Sivakkumar and R. Saraswathi
1153-1158	Passivity and passivity breakdown of 304 stainless steel in alkaline sodium sulphate solutions	S. S. El-egamy and W. A. Badaway
1159-1170	Sulfonated derivatives of polyparaphenylene as proton conducting membranes for direct methanol fuel cell application	C. Le Ninivin, A. Balland-longeau, D. demattei, C. Coutanceau and C. Lamy, et al.
1171-1176	Effect of benzotriazole derivatives on the corrosion and dezincification of brass in neutral chloride solution	R. Ravichandran, S. Nanjundan and N. Rajendran
1177-1184	Application of a Doehlert experimental design to the optimization of an Au–Co plating electrolyte	L. Chalumeau, M. Wery, H.F. Ayedi, M.M. Chabouni and C. Leclere

Volume 34, Number 12 / December 2004

1191-1197	Impedance of a rotating disc electrode with a reversible reaction	M. Boillot, S. Didierjean and F. Lapicque
1199-1203	Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries	X.M Feng, X.P. Ai and H.X. Yang
1205-1210	Modification and evaluation of membranes for vanadium redox battery applications	B. Tian, C.-W. Yan and F.-H. Wang
1211-1214	Study of lithiated Nafion ionomer for lithium batteries	H. Y. Liang, X. P. Qiu, S. C. Zhang, W. T. Zhu and L. Q. Chen
1215-1219	Water diffusion coefficients during copper electropolishing	Bing Du and Ian Ivar suni
1221-1227	Fe³⁺--gluconate and Ca²⁺-Fe³⁺--gluconate complexes as mediators for indirect cathodic reduction of vat dyes – Cyclic voltammetry and batch electrolysis experiments	Thomas Bechtold and Aurora Turcanu
1229-1233	The relationship between the structure and electrocatalytic properties of TiO₂ electrodes doped with CeO₂	Célia Machado Ronconi, Paulo Roberto Zanotto, Ursula Brocksom, Pedro A.P. Nascente and Ernesto Chaves Pereira
1235-1240	Flow influenced electrochemical corrosion of nickel aluminium bronze – Part I. Cathodic polarisation	G. Kear, B. D. Barker, K. Stokes and F. C. Walsh
1241-1248	Flow influenced electrochemical corrosion of nickel aluminium bronze – Part II. Anodic polarisation and derivation of the mixed potential	G. Kear, B. D. Barker, K. Stokes and F. C. Walsh
1249-1258	Texture and surface morphology in zinc electrodeposits	K. Raeissi, A. Saatchi, M. A. Golozar and J. A. Szpunar
1259-1263	Reaction rate and electrochemical stability of conducting polymer films used for the reduction of hexavalent chromium	L. A. M. Ruotolo and A. A. Liao
1265-1269	Electrochemical treatment of methyl parathion based on the implementation of a factorial design	A.G. Vlyssides, D.G. Arapoglou, C.J. Israilides, E.M.P. Barampouti and S.T. Mai
1271-1278	Electrodeposition of magnesium from the eutectic LiCl–KCl melt	A.M. Martínez, B. Børresen, G.M. Haarberg, Y. Castrillejo and R. Tunold
1279-1285	Fabrication of TiO₂ composite materials for air purification by magnetic field effect and electrocodeposition	S. Yonemochi, A. Sugiyama, K. Kawamura, T. Nagoya and R. Aogaki
1287-1291	Low-temperature SOFCs using biomass-produced gases as fuels	Yanhong Yin, Wei Zhu, Changrong Xia, Cen Gao and Guangyao Meng

Volume 35, Number 1 / January 2005

1-7	Selection of an oxidant for copper chemical mechanical polishing: Copper-iodate system	M. Anik
9-15	Effect of WC on electrodeposition and corrosion behaviour of chromium coatings	S. Surviliene, V. Jasulaitiene, A. Lisowska-Oleksiak and V. A. Safonov
17-26	Anomalous electrical conductivity of aqueous solutions in submicron cracks and gaps	Victor A. Marichev
27-32	A sealed, starved-electrolyte nickel–iron battery	B. Hariprakash, S. K. Martha, M. S. Hegde and A. K. Shukla
33-39	Thiazoles as corrosion inhibitors for mild steel in formic and acetic acid solutions	M. A. Quraishi and H. K. Sharma
41-47	Environmentally friendly natural polyhydroxylic compounds in electroless copper plating baths: application of xylitol, D
49-60	Electrochemistry of metals and semiconductors in fluoride media	M. Noel and N. Suryanarayanan
61-67	Fabrication of YSZ electrolyte using electrostatic spray deposition (ESD):I – a comprehensive parametric study	Hiroshi Nomura, Sandeep Parekh, J. Robert Selman and Said Al-Hallaj
69-76	Comparative study of copper electrodeposition from sulphate acidic electrolytes in the presence of IT-85 and of its components	S. Varvara, L. Muresan, I. C. Popescu and G. Maurin
77-84	The etching behavior of n-GaP in aqua regia solutions	K. L. Chang, C. K. Lee, J. W. Hsu, H. F. Hsieh and H. C. Shih
85-90	Characterization of different Pt/Metal/Complex catalysts as anode catalysts for the PEM fuel cell	N. Martz, C. Roth and H. Fueß
91-96	Direct methanol alkaline fuel cells with catalysed anion exchange membrane electrodes	E. H. Yu and K. Scott
97-99	Thermal characteristics of a cell employed for the anodic oxidation of certain naphthalene derivatives	R. E. Sioda and T. Z. Fahidy
101-111	Copper recovery in a spouted vessel electrolytic reactor (SBER)	P. A. Shirvanian and J. M. Calo

Volume 35, Number 2 / February 2005

117-122	A low external temperature method for synthesis of active electrode materials for Li batteries – Part A: Synthesis of pure manganese spinel	S. Uzunova, B. Banov, A. Momchilov, S. Vassilev and T. Stankulov, et al.
123-130	Electrochemical studies of the interaction between a modified activated carbon surface and heavy metal ions	M. Walczyk, A. Świątkowski, M. Pakuła and S Biniak
131-137	Effects of sulfide and lead nitrate addition to a gold cyanidation circuit using potentiodynamic measurements	O. May, S. Jin, E. Ghali and G. Deschênes
139-149	The influence of microstructure on the corrosion rate of various carbon steels	D. Clover, B. Kinsella, B. Pejcic and R. De Marco
151-156	Synthesis and electrochemical properties of layered LiNi_1/2Mn_1/2O₂prepared by coprecipitation	Y.-K. Sun, Y.C. Bae and S.-T. Myung
157-162	Physical and electrochemical characteristics of nanostructured nickel hydroxide powder	Q.S. Song, Y.Y. Li and S.L.I. Chan
163-168	Improvement of electrochemical properties of PEO–LiTFSI electrolyte by incorporation of boroxine polymers with different backbone lengths	Ruoyuan Tao and Tatsuo Fujinami
169-176	Substrate-induced coagulation (SIC) of nano-disperse carbon black in non-aqueous media: a method of manufacturing highly conductive cathode materials for Li-ion batteries by self-assembly	Angelika Basch, Bernhard Gollas, Roger Horn and Jürgen O. Besenhard
177-184	Enhanced cyclability of LiCoO₂ cathodes coated with alumina derived from carboxylate–alumoxanes	George Ting-Kuo Fey, Jian-Ging Chen and T. Prem Kumar
185-191	Comparison of Ti/BDD and Ti/SnO₂–Sb₂O₅ electrodes for pollutant oxidation	Xueming Chen, Furong Gao and Guohua Chen
193-198	Electro-oxidation of ethylene glycol on PtRu/C and PtSn/C electrocatalysts prepared by alcohol-reduction process	A.O. Neto, T.R.R. Vasconcelos, R.W.R.V. Da Silva, M. Linardi and E.V. Spinacé
199-206	Influence of oxide dopants on the wetting of doped graphite by cryolite/alumina melts	E. Laé, V. Sahajwalla, B. Welch and M. Skyllas-Kazacos
207-212	Zeolite-based composite membranes for high temperature direct methanol fuel cells	V. Baglio, A.S. Arico, A. Di Blasi, P. L. Antonucci and F. Nannetti, et al.
213-216	Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution	X.Y. Wang, J.M. Wang, H.B. Shao, J.Q. Zhang and C.N. Cao
217-227	Electrochemical and AFM study of Zn electrodeposition in the presence of benzylideneacetone in a chloride-based acidic bath	P. Díaz-Arista, Y. Meas, R. Ortega and G. Trejo

Volume 35, Number 3 / March 2005

229-233	High capacity supercapacitors based on modified activated carbon aerogel	B. Fang, Y. Z. Wei, K. Maruyama and M. Kumagai
235-241	Interactions of polypyridyl cobalt complexes with DNA studied by rotating electrode methods	Hong Li, Zhenghe Xu, Liang-Nian Ji and Wei-Shan Li
243-248	Feasibility study for reductive destruction of carbon tetrachloride using bare and polymer coated nickel electrodes	Jiankang Wang and James Farrell
249-258	Improvement of a cementation process by ultrasound: case of the cadmium–zinc couple at a RDE	N.T. Pham, M. Aurousseau, F. Gros and P. Ozil
259-265	Open circuit voltage for solid polymer electrolyte/salt systems in lithium batteries	Sung Jin Pai and Young Chan Bae
267-271	Effects of some ions on ion-selectivity of ferrous sulfide film	J. M. Zhao, Z. Wei, Y. Zuo and X. H. Zhao
273-278	The bromine electrode Part II: reaction kinetics at polycrystalline Pt	Sergio Ferro, Chiara Orsan and Achille De Battisti
279-283	The bromine electrode Part III: reaction kinetics at highly boron-doped diamond electrodes	Sergio Ferro
285-291	Mass transfer studies at rotating cylinder electrodes of expanded metal	J.M. Grau and J.M. Bisang
293-295	Suppression of electrolyte creepage with polymer hydrogel electrolyte for nickel/metal hydride batteries	Chiaki Iwakura, Mikimasa Horiuchi, Shinji Nohara, Naoji Furukawa and Hiroshi Inoue
297-303	Electrochemical removal of hydrogen sulfide from polluted brines using porous flow through electrodes	B.G. Ateya, F.M. Al-Kharafi, R.M. Abdallah and A. S. Al-Azab
305-310	Calculation of the current density distribution of submicron copper electroplating based on uneven adsorption of poly(ethylene glycol)	Bang-Hao Wu, Chi-Chao Wan and Yung-Yun Wang
311-317	Effects of ultrasonics on the properties of continuous nickel foam	C.S. Dai, D.L. Wang, X.G. Hu and F. Ding
319-325	Electrochemical Regeneration of Activated Carbon Saturated with Toluene	MIGUEL GARCÍA-OTÓN, FRANCISCO MONTILLA, M. ANGELES LILLO-RÓDENAS, EMILIA MORALLÓN and JOSÉ LUÍS VÁZQUEZ
327-337	On efficiency of both single fuel cells and stacks I	ROBERTO C. DANTE, JOCHEN LEHMANN and OMAR SOLORZA-FERIA
339-345	An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper	Suchun Zhang and M. J. Nicol
347-353	Electrochemical impedance study on brass corrosion in NaCl and (NH₄)₂SO₄ solutions during cyclic wet–dry conditions	Gamal A. EL-Mahdy

Volume 35, Number 4 / April 2005

355	Foreword
357-361	Electrochemical degradation of anionic surfactants	M. Panizza, M. Delucchi and G. Cerisola
363-368	Electroreduction of volatile organic halides on activated silver cathodes	Giorgio Fiori, Sandra Rondinini, Guido Sello, Alberto Vertova and Magdalena Cirja, et al.
369-374	Removal of vegetal tannins from wastewater by electroprecipitation combinedwith electrogenerated Fenton oxidation	B. Boye, G. Farnia, G. Sandonà, A. Buso and M. Giomo
375-380	Polymer assisted ultrafiltration for copper–citric acid chelate removal from wash solutions of contaminated soil	R. Molinari, T. Poerio and P. Argurio
381-390	Tannery wastewater treatment by electro-oxidation coupled with a biological process	Lidia Szpyrkowicz, Santosh N. Kaul and Rao N. Neti
391-398	Oxidation efficiency in the electro-Fenton process	Anna da Pozza, Paola Ferrantelli, Carlo Merli and Elisabetta Petrucci
399-403	Analysis of the oxygen reduction process on SOFC composite electrodes	A. Barbucci, M. Viviani, M. Panizza, M. Delucchi and G. Cerisola
405-411	Deactivation and regeneration of Pt anodes for the electro-oxidation of phenol	D. Fino, C. Carlesi Jara, G. Saracco, V. Specchia and P. Spinelli
413-419	An experimental comparison of a graphite electrode and a gas diffusion electrode for the cathodic production of hydrogen peroxide	Anna Da Pozzo, Luca Di Palma, Carlo Merli and Elisabetta Petrucci

Volume 35, Number 5 / May 2005

421-427	Electrochemical reduction of nitrate ion on various cathodes – reaction kinetics on bronze cathode	C. Polatides and G. Kyriacou
429-436	Modelling of the steel–concrete interface to obtain information on reinforcement bar corrosion	V. Feliu, J.A. Gonzàlez and S. Feliu
437-443	Electrochemical kinetic behaviour of the aqueous manganese dioxide electrode	Gregory J. Browning and Scott W. Donne
445-447	Corrosion-resistant lightweight metallic bipolar plates for PEM fuel cells	Yue Hung, K. M. EL-Khatib and Hazem Tawfik
449-458	The Influence of electrochemical surface modifications on naval steel corrosion	C. F. Zinola, V. Díaz, S. Martínez and J. Rodríguez
459-465	Electrochemical synthesis of perovskite oxides	G. Helen Annal Therese, M. Dinamani and P. Vishnu Kamath
467-472	Corrosion protection of AA6061 T6-10 % Al₂O₃ composite by molybdate conversion coatings	Abdel Salam Hamdy, Anna Maria Beccaria and Pierluigi Traverso
473-478	Effect of surface preparation prior to cerium pre-treatment on the corrosion protection performance of aluminum composites	Abdel Salam Hamdy and Anna Maria Beccaria
479-485	CdTe semiconductor nanowires and NiFe ferro-magnetic metal nanowires electrodeposited into cylindrical nano-pores on the surface of anodized aluminum	Takeshi Ohgai, Laurent Gravier, Xavier Hoffer and Jean-Philippe Ansermet
487-498	Determination of heterogeneities in a scraped
499-506	3-Hydroxybenzoic acid as AISI 316L stainless steel corrosion inhibitor
507-512	Li–H₂ cells with molten alkali chlorides electrolyte	Hiroshi Ito, Yasuo Hasegawa and Yasuhiko Ito
513-519	Selective detection of dopamine using a functionalised polyaniline composite electrode	J. Mathiyarasu, S. Senthilkumar, K. L. N. Phani and V. Yegnaraman

Volume 35, Number 6 / June 2005

521-528	Carbon deposition and alkali poisoning at each point of the reforming catalysts in DIR-MCFC	Jung-ho Wee and Kwan-Young Lee
529-537	Electrochemical behavior of coupled carbon fiber-reinforced polymer (CFRP) rods in concrete	A.A. Torres-Acosta and R. Sen
539-544	Internal stress in multilayer silver–bismuth coatings	I. Krastev, T. Valkova and A. Zielonka
545-549	Electrodeposition of nickel in the presence of Al³⁺ from sulfate baths	U. S. Mohanty, B. C. Tripathy, P. Singh, S. C. Das and V. N. Misra
551-560	Application of a solid polymer electrolyte reactor to remove nitrate ions from wastewater	H. Cheng, K. Scott and P.A. Christensen
561-566	Electrolytic oxidation of Ce(III) in nitric acid and sulfuric acid media using a flow type cell	Y. Wei, B. Fang, T. Arai and M. Kumagai
567-571	Measuring mercury ion concentration with a carbon nano tube paste electrode using the cyclic voltammetry method	Suw Young LY, Sung Kuk Kim, Tae Hyun Kim, Young Sam Jung and Sang Min Lee
573-579	Interactions between lignosulphonates and the components of the lead acid battery. Part 2. Interactions with the electrolyte and lead sulphate growth	Bernt O. Myrvold
581-587	High surface area, supported precious metal cathodes utilizing metal microfibrous collectors for application in chlor-alkali cells	Ryan A. Nickell and Bruce J. Tatarchuk
589-598	Simulation and experimental determination of the macro-scale layer thickness distribution of electrodeposited Cu-line patterns on a wafer substrate	Karen Pantleon, Bart Van Den Bossche, Marius Purcar, Paolo Bariani and Gert Floridor
599-607	On the electrochemical flow measurements using carbon-based screen-printed electrodiffusion probes	Xavier Adolphe, Ilaria Palchetti, Marco Mascini and Serguei Martemianov
609-613	Removal and recovery of copper via a galvanic cementation system part II: batch-recycle reactor	Y.P. Hor and N. Mohamed
615-623	The function of vinylene carbonate as a thermal additive to electrolyte in lithium batteries	Hsiang-Hwan Lee, Yung-Yun Wang, Chi-Chao Wan, Mo-Hua Yang and Hung-Chun Wu, et al.
625-631	Electrochemical oxidation of phenolic compounds using a flow-through electrolyser with porous solid electrodes	R. Menini, Y. M. Henuset and J. Fournier
633-639	Journal of Applied Electrochemistry Diary

Volume 35, Numbers 7-8 / July 2005

641-653	Thick titania films for semiconductor photocatalysis	Andrew Mills, George Hill, Matthew Crow and Stephanie Hodgen
655-663	State of the art and perspectives on materials and applications of photocatalysis over TiO₂	Alexander G. Agrios and Pierre Pichat
665-673	The fate of organic nitrogen in photocatalysis: an overview	P. Calza, E. Pelizzetti and C. Minero
675-681	A fluidized bed photoreactor exploiting a supported photocatalyst with adsorption pre-concentration capacity	E. Vaisman, M. F. Kabir, A. Kantzas and C. H. Langford
683-692	The photoelectrocatalytic oxidation of aqueous nitrophenol using a novel reactor	P. A. Christensen, T. A. Egerton, S. A. M. Kosa, J. R. Tinlin and K. Scott
693-697	Photocatalytic microreactor study using TiO₂-coated porous ceramics	Sittidej Teekateerawej, Junichi Nishino and Yoshio Nosaka
699-708	Development of an optical fiber monolith reactor for photocatalytic wastewater Treatment	Hongfei Lin and Kalliat T. Valsaraj
709-714	Modeling of the photocatalytic decomposition of gaseous benzene in a TiO₂ coated optical fiber photoreactor	W. Wang, Y. Ku, C. M. Ma and F. T. Jeng
715-721	Photoelectrolytic oxidation of organic species at mesoporous tungsten trioxide film electrodes under visible light illumination	R. Solarska, C. Santato, C. Jorand-Sartoretti, M. Ulmann and J. Augustynski
723-731	Photocatalytic and electrochemically assisted photocatalytic oxidation of formic acid on TiO₂ films under UVA and UVB irradiation	T.A. McMurray, J.A. Byrne, P.S.M. Dunlop and E.T. McAdams
733-740	Mechanism of degradation of nitrilotriacetic acid by heterogeneous photocatalysis over TiO₂ and platinized TiO₂	Carina A. Emilio, Raquel Gettar and Marta I. Litter
741-750	Photoelectrocatalytic degradation of bisphenol A in aqueous solution using a Au–TiO₂/ITO film	X.Z. Li, C. He, Nigel Graham and Y. Xiong
751-756	Synthesis of metal–cadmium sulfide nanocomposites using jingle-bell-shaped core-shell photocatalyst particles	Bonamali Pal, Tsukasa Torimoto, Kentaro Iwasaki, Tamaki Shibayama and Heishichiro Takahashi, et al.
757-763	Enhanced photocatalytic degradation of tetramethylammonium on silica-loaded titania	Muhammad Shariq Vohra, Jaesang Lee and Wonyong Choi
765-774	Removal of drugs in aqueous systems by photoassisted degradation	M. Addamo, V. Augugliaro, A. Di Paola, E. García-López and V. Loddo, et al.
775-781	Heterogeneous photocatalytic reduction of Fe(VI) in UV-irradiated titania suspensions: effect of ammonia	Virender K. Sharma and Benoit V.N. Chenay
783-791	Photocatalytic partial oxidation of methylpyridine isomers on TiO₂ particles under an anaerobic condition	Teruhisa Ohno, Toshiki Tsubota and Ryoji Inaba
793-797	Photooxidation of organic compounds in a solution containing hydrogen peroxide and TiO₂ particles under visible light	Yoshiko K. Takahara, Yasushi Hanada, Teruhisa Ohno, Shin Ushiroda and Shigeru Ikeda, et al.
799-813	The effect of UV absorption on the photocatalytic oxidation of 2-nitrophenol and 4-nitrophenol	T.A. Egerton, P.A. Christensen, R.W. Harrison and J.W. Wang
815-820	Photocatalytic degradation of aromatic sulfonates present in industrial percolates	Debora Fabbri, Alessandra Bianco Prevot and Edmondo Pramauro
821-829	Mass transfer and photocatalytic degradation of leather dye using TiO₂/UV	Regina de Fátima Peralta Muniz Moreira, Ticiane Pokrywiecki Sauer, Leonardo Casaril and Eduardo Humeres
831-836	Photodegradation of dyes in aqueous solutions catalyzed by highly efficient nanocrystalline titania films	P. Bouras and P. Lianos

Volume 35, Number 9 / September 2005

837-843	Correlation between accelerated corrosion tests and atmospheric corrosion tests on steel	Chuen-Chang Lin and Chi-Xiang Wang
845-849	Electroreduction of (1S,2S)-2-amino-1-(4-nitrophenyl)-propane-1,3-diol derivatives. Behaviour of electrogenerated species and applications to organic synthesis	C.V. Cristea, C. Moinet, M. JITARU and M. Darabantu
851-855	Electrosynthesis of nitroso compounds from (1S, 2S)-2-amino-l-(4-nitrophenyl)-propane-1,3-diol derivatives	C. V. Cristea, C. Moinet, M. Jitaru and I. C. Popescu
857-864	Synthetic diamond electrodes: The effect of surface microroughnesson the electrochemical properties of CVD diamond thin films on titanium	Yu. V. Pleskov, Yu. E. Evstefeeva, M. D. Krotova, P. Y. Lim and H. C. Shih, et al.
865-870	Effect of water vapor on proton conduction of cesium dihydrogen phosphateand application to intermediate temperature fuel cells	Junichiro Otomo, Takanori Tamaki, Satoru Nishida, Shuqiang Wang and Masaru Ogura, et al.
871-878	Proton diffusion in γ-manganese dioxide	G.J. Browning and S.W. Donne
879-888	Environmentally safe corrosion inhibition of the Cu–Ni alloys in acidic sulfate solutions	Waheed A. Badawy, Khaled M. Ismail and Ahlam M. Fathi
889-895	Effect of amino acids containing sulfur on the corrosion of mild steel in phosphoric acid solutions containing Cl⁻, F⁻ and Fe³⁺ ions: Behavior under polarization conditions	M. S. Morad
897-902	Evaluation of electrolysis for oxidative deodorization of hog manure	Dorin Bejan, Farida Sagitova and Nigel J. Bunce
903-913	The electrochemical and electrocatalytic behaviour of glassy metals	H. C. Brookes, C. M. Carruthers and T. B. Doyle
915-924	Effect of preparation procedure of Iro₂–Nb₂o₅ anodes on surface and electrocatalytic properties	Màrio H.P. Santana, Luiz A. De Faria and Julien F.C. Boodts
925-930	Recovery of aluminum from oxide particles in aluminum dross using AlF₃–NaF–BaCl₂ molten salt	Mikito Ueda, Shiro Tsukamoto, Shoichi Konda and Toshiaki Ohtsuka
931-938	Metastability and electrocatalytic activity of ruthenium dioxide cathodes used in water electrolysis cells	L. Declan Burke and Nageb S. Naser

Volume 35, Number 10 / October 2005

945-953	Electro-Oxidation of Carbonate in Aqueous Solution on a Platinum Rotating Ring Disk Electrode	Jiujun Zhang and Colin W. Oloman
955-965	The Electro-Reduction of Carbon Dioxide in a Continuous Reactor	Hui Li and Colin Oloman
967-973	Electrochemical Oxidation of Ferulic Acid in Aqueous Solutions at Gold Oxide and Lead Dioxide Electrodes	S. Kallel Trabelsi, N. Belhadj Tahar, B. Trabelsi and R. Abdelhedi
975-984	Passivity and Corrosion of Cu–xZn (x = 10–40 wt%) Alloys in Borate Buffer Containing Chloride Ions	T. Kosec. Mikić, I. Milošev and B. Pihlar
985-989	On-Line Measuring Method for the Concentration of Peroxodisulphate	E. Giebler and H. Kirmse
991-997	Preparation of a Novel Composite Material Based on a Nafion^® Membrane and Polypyrrole for Potential Application in a PEM Fuel Cell	S. Moravcová, Z. Cílová and K. Bouzek
999-1004	Anodic Dissolution of Metals in Oxide-Free Cryolite Melts	L. Cassayre, P. Chamelot, L. Arurault and P. Taxil
1005-1013	Capacity Fade Analysis of a Battery/Super Capacitor Hybrid and a Battery under Pulse Loads – Full Cell Studies	Rajeswari Chandrasekaran, Godfrey Sikha and Branko N. Popov
1015-1024	Peroxide Formation in a Zero-Gap Chlor-Alkali Cell with an Oxygen-Depolarized Cathode	Ludwig Lipp, Shimshon Gottesfeld and Jerzy Chlistunoff
1025-1032	Effect of Schiff Bases Containing Pyridyl Group as Corrosion Inhibitors for Low Carbon Steel in 0.1 M HCl	A. Yurt, G. Bereket, A. Kivrak, A. Balaban and B. Erk
1033-1038	Preparation and Characterization of LiNi_0.8Co_0.2O₂ Synthesized by an Emulsion Drying Method	Tae-Hyung Cho and Hoon-Taek Chung
1039	A Simple and Effective Porous Plug for a Practical Standard Reference Electrode in Nonaqueous Media	José A. Caram

Volume 35, Number 11 / November 2005

1045-1050	Synthesis and electrochemical behaviour of tin oxide for use as anode in lithium rechargeable batteries	A. Sivashanmugam, T. Premkumar, S. Gopukumar, N. G. Renganathan and M. Wohlfahrt-mehrens, et al.
1051-1057	Methodology for zinc phosphate pigment incorporation into polypyrrole matrix	Denise M. Lenz, Michel Delamar and Carlos A. Ferreira
1059-1065	The effect of electrolyte flow rate and temperature on corrosion and protection
1067-1072	Comparison of the characteristics of electric double-layer capacitors with
1073-1080	Synthesis of cathode material LiNi_1-
1081-1085	Inhibition of copper corrosion in aerated hydrochloric acid solution by amino-acid compounds	Da-quan Zhang, Li-xin Gao and Guo-ding Zhou
1087-1093	Electrochemical incineration of oxalic acid: Reactivity and engineering parameters	C.A. MARTÍNEZ-HUITLE, S. FERRO and A. DE BATTISTI
1095-1101	Thiophene derivatives as effective inhibitors for the corrosion of steel in 0.5 m
1103-1109	Preparation and characterisation of Pt deposition on ion conducting membrane
1111-1120	Development of high-capacity primary alkaline manganese dioxide/zinc cells consisting of Bi-doping of MnO₂	Deyang Qu, Donald Diehl, B.E. Conway, W.G. Pell and S.Y. Qian
1121-1126	Fabrication of YSZ electrolyte for intermediate temperature solid oxide fuel cell using electrostatic spray deposition: II – Cell performance	HIROSHI NOMURA, SANDEEP PAREKH, J. ROBERT SELMAN and SAID AL-HALLAJ
1127-1132	Selective etching of CoFeNiCu/Cu multilayers	Q. Huang and E.J. Podlaha
1133-1139	Electrodeposition of Zn–Mn alloys in acidic and alkaline baths. Influence of additives on the morphological and structural properties	D. SYLLA, C. REBERE, M. GADOULEAU, C. SAVALL and J. CREUS, et al.
1141-1144	Performance characteristics of organic–inorganic composite electrodes in magnesium reserve batteries	R. THIRUNAKARAN, S. VASUDEVAN, N. MUNIYANDI, A. SIVASHANMUGAM and S. GOPUKUMAR
1145-1156	Electrochemical characterization of La_0.8Sr_0.2MnO₃-coated NiO as cathodes for molten carbonate fuel cells	Bo Huang, Shao-rong Wang, Qing-chun Yu, Yu Liu and Ke-Ao Hu
1157-1161	Electro-reduction of hydrogen peroxide on iron tetramethoxy phenyl porphyrin

Volume 35, Number 12 / December 2005

1167	Editor’s foreword for Kreysa special issue
1169	Professor Dr Gerhard Kreysa
1171-1181	Macrokinetic analysis of polarisation characteristics of gas-diffusion electrodes in contact with liquid electrolytes, Part II: Oxygen reduction as example for a higher order reaction	Kai Sundmacher and Thorsten Schultz
1183-1190	Simplified model to predict the effect of the leakage current on primary and secondary current distributions in electrochemical reactors with a bipolar electrode	E.R. Henquín and J.M. Bisang
1191-1202	Modelling potentials, concentrations and current densities in porous electrodes for metal recovery from dilute aqueous effluents	C.Y. Cheng, G.H. Kelsall and D. Pilone
1203-1211	Electrocatalytic activity of copper alloys for
1213-1223	Effect of composition on the surface and electrocatalytic properties of Ti/IrO
1225-1230	Improvement of protection performance of polypyrrole by dopant anions	U. Rammelt, L. M. Duc and W. Plieth
1231-1237	Potential-controlled chromatography for the separation of amino acids and peptides	F. Kocak, K. Vuorilehto, J. Schrader and D. Sell
1239-1243	Methanol crossover effect on the cathode potential of a direct PEM fuel cell	V. A. Paganin, E. Sitta, T. Iwasita and W. Vielstich
1245-1251	Effect of the electrolyte composition on In and Ag–In alloy electrodeposition
1253-1264	Electrochemical promotion of the oxidation of propane on Pt/YSZ and Rh/YSZ catalyst-electrodes	N. Kotsionopoulos and S. Bebelis
1265-1270	Evaluation of boron doped diamond electrodes for organic electrosynthesis
1271-1276	Noise characterization of surface processes of the Li/organic electrolyte interface	B.M. Grafov, L.S. Kanevskii and M.G. Astafiev
1277-1282	Electrical efficiencies of methane fired, high- and low- temperature fuel cell power plants	Hartmut Wendt
1283-1292	Cleavage of alkenes by anodic oxidation	U.-St. Bäumer and H.J. Schäfer
1293-1301	Ion exchange properties and selectivity of PSS in an electrochemically switchable PPy matrix	K.-M. Mangold, C. Weidlich, J. Schuster and K. Jüttner
1303-1309	Effect of curing on the corrosion protective properties of thin organosilane films on aluminium	C. LE PEN and J. VEREECKEN
1311-1319	Recovery of chlorine from dilute hydrochloric acid by electrolysis using a chlorine resistant anion exchange membrane	V. BARMASHENKO and J. JÖRISSEN
1321-1329	Studies on electrochemical disinfectant production using anodes containing RuO₂	M. E. H. Bergmann and A. S. Koparal
1331-1333	Journal of Applied Electrochemistry Diary

Volume 36, Number 1 / January 2006

1-10	Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO₃	S. Van Damme, G. Nelissen, B. Van den Bossche and J. Deconinck
11-16	Enhanced electrochemical properties of nonstoichiometric amorphous Mg₂Ni_1.3 electrodes	Z. P. Guo, Z. G. Huang, Z. W. Zhao, X. Menard and H. K. Liu
17-23	Effect of operational parameters of mini-direct methanol fuel cells operating
25-32	Application of sodium conducting membranes in direct methanol alkaline fuel cells	E. H. Yu, K. Scott and R. W. Reeve
33-41	Impedance spectroscopy study of anodic growth of thick zirconium oxide films in H₂SO₄, Na₂SO₄ and NaOH solutions	THIERRY PAUPORTÉ and JÖRGEN FINNE
43-47	Synthesis and characterization of poly-(allylbenzene p-sulphonate) films
49-61	Copper electrodeposition in sulphate solutions in the presence of benzotriazole	Nisit Tantavichet and Mark Pritzker
63-67	Copper-doped mesoporous activated carbons as electrode material
69-75	Electroless deposition of copper in acidic solutions using hypophosphite
77-85	Post-discharge kinetics associated with a plasmachemical nucleophilic substitution and application to the analysis of plasma activated CO	Avaly Doubla and Jean-Louis Brisset
87-96	Electrodeposition of Cu from Acidic Sulphate Solutions in the Presence of PEG - Part II Visible Electroreflectance Spectroscopy Measurements during Electrodeposition	B. Bozzini, C. Mele and L. D’Urzo
97-103	Effects of ball milling on the physical and electrochemical characteristics of nickel hydroxide powder	Q.S. SONG, C.H. CHIU and S.L.I. CHAN
105-113	Electrodeposition and corrosion behaviour of a Ni–W–B amorphous alloy	R. A. C. Santana, S. Prasad, A. R. N. Campos, F. O. Araújo and G. P. da Silva, et al.
115-130	Mathematical model for a direct propane phosphoric acid fuel cell	G. Psofogiannakis, Y. Bourgault, B. E. Conway and M. Ternan

Volume 36, Number 2 / February 2006

131-137	Electrodeposition of cobalt on gold during voltammetric cycling	I. Flis-kabulska
139-146	Continuous potentiometric monitoring of viagra (sildenafil) in pharmaceutical preparations using novel membrane sensors	Saad S.M. Hassan, Eman M. Elnemma, Wagiha H. Mahmoud and Ayman H.K. Mohammed
147-151	Electrocatalytic oxidation of lactose on gold nanoparticle modified carbon in carbonate buffer	K. B. Kokoh and N. Alonso-Vante
153-160	Protection of stainless steel by polyaniline films against corrosion in aqueous environments	M.E. NICHO, HAILIN HU, J.G. GONZÁLEZ-RODRIGUEZ and V.M. SALINAS-BRAVO
161-172	Calculation for the cathode surface concentrations in the electrochemical reduction of CO₂ in KHCO₃ solutions	N. Gupta, M. Gattrell and B. MacDougall
173-178	Potentiometric SO₂ gas sensor based on a thick film of Ca²⁺ ion conducting solid electrolyte	L. Wang and R.V. Kumar
179-186	Absorption/desorption of calcium ions on polypyrrole-loaded reticulated vitreous carbon	Mahmoud M. Saleh, C. Weidlich, K.-M. Mangold and K. Jüttner
187-193	On efficiency of both single fuel cells and stacks II	ROBERTO C. DANTE, FRANK MENZL, JOCHEN LEHMANN, CHRISTIAN SPONHOLZ and ORTRUD LUSCHTINETZ, et al.
195-204	Electrochemical behaviour of a magnesium alloy containing rare earth elements	F. Zucchi, V. Grassi, A. Frignani, C. Monticelli and G. Trabanelli
205-214	Polypyrrole artificial muscles: a new rhombic element. Construction and␣electrochemomechanical characterization	T.F. Otero and M. Broschart
215-226	Weight loss, polarization, electrochemical impedance spectroscopy, SEM and EDX studies of the corrosion inhibition of copper in aerated NaCl solutions	Mohammed A. Amin
227-232	Electrochemical waste water treatment: Electrooxidation of acetaminophen	Katie Waterston, Jenny Weijun Wang, Dorin Bejan and Nigel J. Bunce
233-238	Electrocatalytic oxidation of monosaccharides on platinum electrodes modified
239-247	Structures, physicochemical properties and oxygen reduction activities of carbons derived from ferrocene-poly(furfuryl alcohol) mixtures	Jun-ichi Ozaki, Kiyomi Nozawa, Kunitaka Yamada, Yoshinori Uchiyama and Yoko Yoshimoto, et al.
249-253	Electrosynthesis of trimethylorthoformate on BDD electrodes	Romain Fardel, Ulrich Griesbach, Hermann Pütter and Christos Comninellis
255-264	Alkaline peroxide generation using a novel perforated bipole trickle-bed electrochemical reactor	Neeraj Gupta and Colin W. Oloman

Volume 36, Number 3 / March 2006

265-275	Theoretical investigation of steady state multiplicities in solid oxide fuel cells^*	Michael Mangold, Mykhaylo Krasnyk and Kai Sundmacher
277-285	Ohmic drops in the ion-exchange bed of cationic electrodeionisation cells	Akrama Mahmoud, Laurence Muhr, Georges Grévillot, Gérard Valentin and François Lapicque
287-293	On-site formation of hypochlorite for indigo oxidation – Scale-up and full scale operation of an electrolyser for denim bleach processes	T. Bechtold, A. Turcanu, R. Campese, P. Maier and W. Schrott
295-301	Black nickel electrodeposition from a modified Watts bath	Magdy A. M. Ibrahim
303-308	Corrosion behaviour of aluminium metal matrix composites reinforced with TiC processed by pressureless melt infiltration	A. Albiter, A. Contreras, M. Salazar and J. G. Gonzalez-Rodriguez
309-314	Fatty acid oxadiazoles as corrosion inhibitors for mild steel in formic acid	M. A. Quraishi and Farhat A. Ansari
315-322	Role of additives in bright zinc deposition from cyanide free alkaline baths	Shanmugasigamani and Malathy Pushpavanam
323-332	Electrochemical reduction of dilute chromate solutions on carbon felt electrodes	Ines Frenzel, Hans Holdik, Vladimir Barmashenko, Dimitrios F. Stamatialis and Matthias Wessling
333-338	Induced electrodeposition of tungsten with nickel from acidic citrate electrolyte	S.O. Moussa, M.A.M. Ibrahim and S.S. Abd El Rehim
339-345	Mo oxide modified catalysts for direct methanol, formaldehyde
347-353	Pitting corrosion of Cr–Mn–N steel in sulphuric acid media	B.R. Tzaneva, L.B. Fachikov and R.G. Raicheff
355-362	Carbon supported Pt–Cr alloys as oxygen-reduction catalysts for direct methanol fuel cells	E. ANTOLINI, J.R.C. SALGADO, L.G.R.A. SANTOS, G. GARCIA and E.A. TICIANELLI, et al.
363-368	In situ
369-374	Determining the atomic hydrogen surface coverage on iron and nickel electrodes under water treatment conditions	Jiankang Wang and James Farrell
375-383	Evaluation of the corrosion behavior of galvannealed steel in chloride aqueous solution and in tropical marine environment	Paulo S. G. da Silva, Alberto N. C. Costa, Oscar R. Mattos, Adriana N. Correia and P. de Lima-Neto

Volume 36, Number 4 / April 2006

385-394	Hardening effect induced by incorporation of SiC particles in nickel electrodeposits	E.A. Pavlatou, M. Stroumbouli, P. Gyftou and N. Spyrellis
395-402	Corrosion inhibition of carbon steel in acid chloride solution using ethoxylated fatty alkyl amine surfactants	M.A. Migahed, M. Abd-El-Raouf, A.M. Al-Sabagh and H.M. Abd-El-Bary
403-409	Study of an alkaline bath for tin deposition in the presence of sorbitol and physical and morphological characterization of tin film	R. L. Broggi, G. M. de Oliveira, L. L. Barbosa, E. M. J. A. Pallone and I. A. Carlos
411-418	Development of electroconductive polyacrylonitrile fibers through chemical metallization and galvanisation	Djamal Akbarov, Bakhodir Baymuratov, Philippe Westbroek, Rustam Akbarov and Karen De Clerck, et al.
419-423	A novel method of hydrogen generation by water electrolysis using an ultra-short-pulse power supply	Naohiro Shimizu, Souzaburo Hotta, Takayuki Sekiya and Osamu Oda
425-431	A rotating ring–disk study of the initial stages of the anodic dissolution of chalcopyrite in acidic solutions	I. Lazaro and M.J. Nicol
433-439	Oxidation of
441-448	Mechanism of di(methyl)ether (DME) electrooxidation at platinum electrodes in acid medium	G. Kéranguéven, C. Coutanceau, E. Sibert, F. Hahn and J- M. Léger, et al.
449-454	Pulsed electrodeposition of (Bi_1-xSb_x)₂Te₃ thermoelectric thin films	Doriane Del Frari, Sebastien Diliberto, Nicolas Stein, Clotilde Boulanger and Jean-Marie Lecuire
455-462	The Effect of Surfactant Adsorption at a Glassy Carbon Electrode on Electrochemical Oxidation of Propyl Gallate	M. Szymula and J. Narkiewicz-Michałek
463-474	Photoelectrochemical characterisation of thermal and particulate titanium dioxide electrodes	I. Mintsouli, N. Philippidis, I. Poulios and S. Sotiropoulos
475-479	Anodic oxide coatings on Ti–6Al–4V produced from electrolyte containing Ca and P – Corrosion aspects	R. Narayanan and S.K. Seshadri
481-486	Thermal effects associated with hard anodizing of cast aluminum alloys	L.E. Fratila-Apachitei, I. Apachitei and J. Duszczyk
487-497	Discharge characteristics of silver vanadium oxide cathodes	R.P. Ramasamy, C. Feger, T. Strange and B.N. Popov
499-505	Formation of nanocrystalline Zinc on ITO and Silicon substrates by electrochemical deposition	Beatriz H. Juárez and Concepción Alonso

Volume 36, Number 5 / May 2006

507-522	Progress in the synthesis of carbon nanotube- and nanofiber-supported Pt electrocatalysts for PEM fuel cell catalysis	Kunchan Lee, Jiujun Zhang, Haijiang Wang and David P. Wilkinson
523-530	Characterisation of a laboratory electrochemical ozonation system and its application in advanced oxidation processes	Leonardo M. Da Silva, Débora V. Franco, Juliane C. Forti, Wilson F. Jardim and Julien F.C. Boodts
531-538	Underpotential deposition of Tl on Ag in the presence of bromide ions – Estimation of specific capacitance for design of electrochemical supercapacitors	T.C. Girija and M.V. Sangaranarayanan
539-544	Inhibition of mild steel corrosion in sulfuric acid solution by thiadiazoles	M. A. Quraishi and S. Khan
545-556	Electrochemical behaviour of poly(pyrrole) coatings on steel	L. Koene, W.J. Hamer and J.H.W. de Wit
557-565	The titanium/hydrogen system as the solid-state reference in high-temperature proton conductor-based hydrogen sensors	C. Schwandt and D.J. Fray
567-576	A model for the electrochemical reduction of 2-ethylpicolinate under galvanostatic control	A.M. Romulus, J. Lozar and A. Savall
577-581	Removal of oil from oil/water emulsions using electroflotation process	L. Ben Mansour and S. Chalbi
583-590	Anodically grown films on copper and copper–nickel alloys in slightly alkaline solutions	F. Brizuela, R. Procaccini, S. Ceré and M. Vázquez
591-597	Characteristics of zinc electrodeposits from acetate solutions	R. Sekar and Sobha Jayakrishnan
599-602	Electrochemical behavior of anatase TiO₂ in aqueous lithium hydroxide electrolyte	Minakshi Manickam, Pritam Singh, Touma B. Issa and Stephen Thurgate
603-608	Dissolution kinetics of WO₃ in acidic solutions	Mustafa Anik and Tuba Cansizoglu
609-616	Electrochemical investigation of copper–DTPI interactions	Cahit Hicyilmaz and N. Emre Altun

Volume 36, Number 6 / June 2006

617-634	Towards paired and coupled electrode reactions for clean organic microreactor electrosyntheses	Christopher A. Paddon, Mahito Atobe, Toshio Fuchigami, Ping He and Paul Watts, et al.
635-642	Reaction pathways in the electrochemical degradation of thiocarbamate herbicides in NaCl solution	FERENC MOGYORÓDY
643-647	Electrosynthesis of 2,3-dimethyltartaric acid from pyruvic acid in acid medium	C. Martin, K. Servat, H. Huser and K.B. Kokoh
649-654	Effect of Cr(III) solution chemistry on electrodeposition of chromium	S. Survilienė, O. Nivinskienė, A. Češunienė and A. Selskis
655-661	Alkaline blend polymer electrolytes based on polyvinyl alcohol (PVA)/tetraethyl ammonium chloride (TEAC)	Chun-Chen Yang, Gwo-Mei Wu and Sheng-Jen Lin
663-668	Preparation and characterization of TiO₂/Ti film electrodes by anodization at low voltage for photoelectrocatalytic application	Y.B. XIE and X.Z. LI
669-676	Effects of current density on the structure of Ni and Ni–Mn electrodeposits	E. A. Marquis, A. A. Talin, J. J. Kelly, S. H. Goods and J. R. Michael
677-683	Removal of Pb(II) from simulated wastewaters using a stainless-steel wool cathode in a flow-through cell	Luiz H.S. Gasparotto, Nerilso Bocchi, Romeu C. Rocha-Filho and Sonia R. Biaggio
685-690	Electrodeposited MnO₂ as electrocatalyst for carbohydrate oxidation	Debasmita Das, Pratik Kumar Sen and Kaushik Das
691-701	Effect of nickel on copper anode passivation in a copper sulfate solution by electrochemical impedance spectroscopy	G. Jarjoura and G.J. Kipouros
703-710	Influence of counter-ions on the permeability of polypyrrole films to hydrogen	P. Holzhauser and K. Bouzek
711-722	Lead-acid cells with polyaniline-coated negative plates	S.K. Martha, B. Hariprakash, S.A. Gaffoor and A.K. Shukla
723-726	Electrolytic production of metallic cadmium and cadmium–sodium alloys in alkali melts	N.M. Barbin
727-732	The influence of sorbitol on zinc film deposition, zinc dissolution process

Volume 36, Number 7 / July 2006

733-738	Promotion of the electrochemical hydrogenation of nitrobenzene at hydrogen
739-743	Electrochemical properties of Ti_0.17Zr_0.08V_0.35Cr_0.10Ni_0.30 alloy electrode	Yujun Chai, Zhiying Li, Wenya Yin, Xinbo Zhang and Minshou Zhao
745-757	A novel approach for computing tertiary current distributions based on
759-763	Mass transfer studies at packed bed rotating cylinder electrodes of woven-wire meshes	J. M. Grau and J. M. Bisang
765-771	Influence of chlorine-water equilibria on the electrochemical destruction
773-781	Electrochemical Degradation of Thiocarbamates in NaCl Solutions	Ferenc Mogyoródy
783-787	Sr doped Co substituted Li nickelate cathode materials for Li cells with improved cycling and thermal stability	R. Moshtev, P. Zlatilova and S. Vassilev
789-800	Electrodeposition of Cu from Acidic Sulphate Solutions in the Presence of PEG: An Electrochemical and Spectroelectrochemical Investigation – Part I	B. Bozzini, C. Mele, L. D’urzo, G. Giovannelli and S. Natali
801-805	Synthesis of LiNiO₂ cathode by the combustion method	MYOUNGYOUP SONG, IKHYUN KWON, HUNUK KIM, SUNGBO SHIM and DANIEL R. MUMM
807-812	Electrodeposition of Pd–Ag alloy nanowires on highly oriented pyrolytic graphite	Yaokun Xiao, Baicheng Weng, Gang Yu, Jinyin Wang and Bonian Hu, et al.
813-819	Evaluation of concepts for hydrogen – chlorine fuel cells	Magnus Thomassen, Espen Sandnes, Børre Børresen and Reidar Tunold
821-826	A pulse plating method for the electrosynthesis of ZnSe	M. Bouroushian, T. Kosanovic and N. Spyrellis
827-833	Steady-state mass transport between a thin liquid layer separating a fixed (stationary) and a rotating disk in laminar flow	F. Cœuret and T.Z. Fahidy
835-842	Simple design of cast myoglobin/polyethyleneimine modified electrodes	Aurélie Pardo, Régine Basséguy and Alain Bergel
843	Batteries for Portable Devices	Richard Wills
845-846	Studies on Electrochemical Disinfectant Production Using Anodes Containing RuO₂	M. E. H. Bergmann and A. S. Koparal

Volume 36, Number 8 / August 2006

847-862	Deposition of clusters and nanoparticles onto boron-doped diamond electrodes for electrocatalysis	G. Siné, I. Duo, B. El Roustom, G. Fóti and Ch. Comninellis
863-870	Electrogeneration of Hydrogen Peroxide in Acid Medium using Pyrolyzed Cobalt-based Catalysts: Influence of the Cobalt Content on the Electrode Performance	N. Guillet, L. Roué, S. Marcotte, D. Villers and J. P. Dodelet, et al.
871-882	Electrodeposition of FeCoNiCu nanowires	Q. Huang, D. Davis and E.J. Podlaha
883-888	Preparation of Ir_0.3Sn_(0.7-x)Ti_xO₂ Electrodes by the Polymeric Precursor Method: Characterization and Lifetime Study	D. Profeti, T. A. F. Lassali and P. Olivi
889-898	Electrolyte and solvent effects of electrocoated polycarbazole thin films on carbon fiber microelectrodes	A. Sezai Sarac, Murat Ates and Elif Altürk Parlak
899-905	Effects of structure of the ionic head of cationic surfactant on its inhibition of acid corrosion of mild steel	Mahmoud M. Saleh and Asem A. Atia
907-912	Electrochemical co-deposition of ternary Sn–Bi–Cu films for solder bumping applications	Shany Joseph, Girish J. Phatak, K. Gurunathan, Tanay Seth and D.P. Amalnerkar, et al.
913-918	Electro-Catalytic Oxidation of Methanol on a Ni–Cu Alloy in Alkaline Medium	M. Jafarian, R.B. Moghaddam, M.G. Mahjani and F. Gobal
919-929	Involvement of a metastable surface state in the electrocatalytic, electrodeposition and bath additive behaviour of copper in acid solution	L. D. Burke, A. M. O’Connell, R. Sharna and C. A. Buckley
931-936	Nd(III)-PVC Membrane Sensor Based on 2-{[(6-aminopyridin-2-yl)imino]methyl}-phenol	M.R. Ganjali, A. Ahmadalinezhad, P. Norouzi and M. Adib
937-944	Electrodeposition of High-quality Polycarbazole Films in Composite Electrolytes of Boron Trifluoride Diethyl Etherate and Ethyl Ether	Guangming Nie, Jingkun Xu, Shusheng Zhang and Xuejun Han
945-950	A novel preparation method for NiCo₂O₄ electrodes stacked with hexagonal nanosheets for water electrolysis	Jun Yang, Jianbao Li, Hong Lin, Xiaozhan Yang and Xuguang Tong, et al.
951-956	Silver coated lead coins: An appraisal of ancient technology	Giuseppe Giovannelli, Stefano Natali and Benedetto Bozzini

Volume 36, Number 9 / September 2006

957-972	Recent developments in the electrodeposition of nickel and some nickel-based alloys	Renáta Oriňáková, Andrea Turoňová, Daniela Kladeková, Miriam Gálová and Roger M. Smith
973-981	An electrochemical and in situ SERS study of Cu electrodeposition from acidic sulphate solutions in the presence of 3-diethylamino-7-(4-dimethylaminophenylazo)-5-phenylphenazinium chloride (Janus Green B)	B. Bozzini, C. Mele, L. D’Urzo and V. Romanello
983-989	A non-linear AC spectrometry study of the electrodeposition of Cu from acidic sulphate solutions in the presence of PEG	Benedetto Bozzini and Ivonne Sgura
991-996	Numerical optimization of bipolar plates and gas diffusion layers for PEM fuel cells	S.A. Grigoriev, A.A. Kalinnikov, V.N. Fateev and A.A. Wragg
997-998	Numerical optimization of bipolar plates and gas diffusion layers for
999-1003	Photoluminescence properties of porous silicon layers prepared by electrochemical etching in extremely dilute HF solutions	Hideki Koyama
1005-1009	Hydrogen evolution on Ni/WC composite coatings	V. Marinović, J. Stevanović, B. Jugović and M. Maksimović
1011-1019	Testing of electrochromic materials using symmetrical devices	C. Lefrou, C. Gentilhomme and M. Ast
1021-1025	Synthesis of highly dispersed Pt/C electrocatalysts in ethylene glycol using acetate stabilizer for methanol electrooxidation	Guiyan Yu, Weixiang Chen, Jie Zhao and Qiulin Nie
1027-1034	Mechanistic study of the electropolymeric synthesis of a conducting polyacetylene chloride polymer	Ai-Lin Shen and Tse-Chuan Chou
1035-1041	Electrooxidation of benzyl alcohol and benzaldehyde on a nickel oxy-hydroxide electrode in a filter-press type cell	A.J. Motheo, G. Tremiliosi-Filho, E.R. Gonzalez, K.B Kokoh and J.-M. Léger, et al.
1043-1049	A highly stabilized–inhibited nitric acid/ferric nitrate-based solder stripping solution	N. Shaigan and S.N. Ashrafizadeh
1051-1056	Optical, electrical and discharge profiles for (PVC + NaIO₄) polymer electrolytes	Ch. V. Subba Reddy, Quan-Yao Zhu, Li-Qiang Mai and Wen Chen
1057-1068	Electrochemical behaviour of retrogressed and reaged (RRA) 8090 and 1441 Al–Li–Cu–Mg–Zr alloys	K.S. Ghosh, K. Das and U.K. Chatterjee

Volume 36, Number 10 / October 2006

1069-1074	High speed platinum deposition from a sulphamate formulation	Malathy Pushpavanam
1075-1081	Amperometric determination of thiourea in alkaline media on a copper oxide–copper electrode	F. Manea, C. Radovan and J. Schoonman
1083-1089	Thermal runaway of valve-regulated lead-acid batteries	Junmei Hu, Yonglang Guo and Xuechou Zhou
1091-1097	Electrochemical studies on nanofiller incorporated poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries	A. Manuel Stephan, Kee Suk Nahm, M. Anbu Kulandainathan, G. Ravi and J. Wilson
1099-1104	Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries	Libao Chen, Xiaohua Xie, Jingying Xie, Ke Wang and Jun Yang
1105-1115	Development of a continuous reactor for the electro-reduction of carbon dioxide
1117-1125	Performance of ternary PtRuRh/C electrocatalyst with varying Pt:Ru:Rh ratio for methanol electro-oxidation	Tomoyuki Kawaguchi, Yasuhiro Rachi, Wataru Sugimoto, Yasushi Murakami and Yoshio Takasu
1127-1132	Rinsing effect of alkaline electrolyzed water on nickel surfaces	Toshikazu Takenouchi and Shin-ichi Wakabayashi
1133-1141	Scale-up of the perforated bipole trickle-bed electrochemical reactor for the generation of alkaline peroxide	Neeraj Gupta and C.W. Oloman
1143-1149	Electrocatalytic behaviour for oxygen reduction reaction of small nanostructured crystalline bimetallic Pt–M supported catalysts	A. Stassi, C. D’urso, V. Baglio, A. Di Blasi and V. Antonucci, et al.
1151-1156	Scale-up of an electrochemical reactor for treatment of industrial wastewater with an electrochemically generated redox mediator	Lidia Szpyrkowicz and Marta Radaelli
1157-1162	Magneto-sensitive nickel nanowires fabricated by electrodeposition into multi- and single-ion track templates	T. Ohgai, I. Enculescu, C. Zet, L. Westerberg and K. Hjort, et al.
1163-1168	Eco friendly corrosion inhibitors: Inhibitive action of quinine for corrosion of low carbon steel in 1 m HCl	Mohamed Ismail Awad
1169-1173	Electrodeposition of aluminum from molten AlCl₃–NaCl–KCl mixture	M. Jafarian, M. G. Mahjani, F. Gobal and I. Danaee
1175-1182	Electrochemical treatment of olive mill wastewaters: Removal of phenolic compounds and decolourization	Chokri Belaid, Monem Kallel, Moncef Khadhraou, Gérard Lalleve and Boubaker Elleuch, et al.

Volume 36, Number 11 / November 2006

1183	Editor’s foreword	Tony Wragg
1185	Professor Dr Joachim Heitbaum	M. Wohlfahrt-Mehrens
1187-1198	Electrooxidation of acetaldehyde on carbon-supported Pt, PtRu and Pt₃Sn and unsupported PtRu_0.2 catalysts: A quantitative DEMS study	H. Wang, Z. Jusys and R.J. Behm
1199-1206	The behaviour of graphite, carbon black, and Li₄Ti₅O₁₂ in LiBOB-based electrolytes	Mario Wachtler, Margret Wohlfahrt-Mehrens, Sandra Ströbele, Jan-Christoph Panitz and Ulrich Wietelmann
1207-1214	Formic acid oxidation on Pd-modified Pt(100) and Pt(111) electrodes: A DEMS study	F. J. Vidal-Iglesias, J. Solla-Gullón, E. Herrero, A. Aldaz and J. M. Feliu
1215-1221	On-line mass spectrometry system for measurements at single-crystal electrodes in hanging meniscus configuration	A.H. Wonders, T.H.M. Housmans, V. Rosca and M.T.M. Koper
1223-1229	Optimization of CdTe nanofilm formation by electrochemical atomic layer epitaxy (EC-ALE)	V. Venkatasamy, N. Jayaraju, S.M. Cox, C. Thambidurai and U. Happek, et al.
1231-1235	Stochastic simulations of electrochemical electron transfer reactions	J. Grimminger and W. Schmickler
1237-1240	Electrochemically promoted olefin isomerization reactions at polymer electrolyte fuel␣cell membrane electrode assemblies	Maria Salazar and Eugene S. Smotkin
1241-1252	Copper dissolution in the presence of a binary 2D-compound: CuI on Cu(100)	P. Broekmann, N. T. M. Hai and K. Wandelt
1253-1260	A DEMS study of the electrocatalytic hydrogenation and oxidation
1261-1269	Effect of Cu(II) ligands on electroless copper deposition rate in formaldehyde solutions: An EQCM study	R. PauliukaitĖ, G. Stalnionis, Z. Jusys and A. Vaškelis
1271-1279	Heterogeneously assisted oxidation of adsorbates from carbonmonoxide, methanol and ethanol by hydrogen peroxide solutions on platinum electrodes in sulphuric acid	J.L. Rodríguez, E. Pastor, C.F. Zinola and V.M. Schmidt
1281-1290	Electrochemical detoxification of waste water without additives using solid polymer electrolyte (SPE) technology	A. Heyl and J. Jörissen
1291-1295	Purification process for an inorganic rechargeable lithium battery and new safety concepts	L. Zinck, M. Borck, C. Ripp and G. Hambitzer
1297-1306	Towards a determination of the active surface area of polycrystalline and nanoparticle electrodes by Cu upd and CO oxidation	T. Nagel, N. Bogolowski and H. Baltruschat
1307-1310	Electrochemical performance of a novel surface modified spherical graphite as anode material for lithium ion batteries	K. Endo, H.P. Zhang, L.J. Fu, Kyeong Jik Lee and K. Sekine, et al.

Volume 36, Number 12 / December 2006

1311-1315	The inhibition of copper–nickel alloy corrosion under controlled hydrodynamic condition in seawater	S. Martinez and M. Metikoš-Huković
1317-1326	Electrochemical studies of gold ore processing wastewater containing cyanide, copper, and sulfur compounds	S. C. Cheng, M. Gattrell, T. Guena and B. MacDougall
1327-1332	Kinetic characterization of Prussian Blue-modified graphite electrodes for amperometric detection of hydrogen peroxide	Raluca C. Cretu, Delia M. Gligor, Laura Muresan, Ionel Catalin Popescu and Liana M. Muresan
1333-1339	A low external temperature method for synthesis of active electrode materials for Li batteries – Part B: Synthesis of lithium iron oxides Li_xFe_yO_z	S. Uzunova, I. Uzunov, D. Kovacheva, A. Momchilov and B. Puresheva
1341-1346	Photoelectrochemical studies on the n-MoS₂–Cysteine interaction	T. Moehl, M. Abd El Halim and H. Tributsch
1347-1352	Interfacial tension between aluminum and cryolite melts during electrolysis
1353-1359	Corrosion of brass in natural and artificial seawater	C.I.S. Santos, M.H. Mendonça and I.T.E. Fonseca
1361-1366	Investigation of Ti mesh-supported anodes for direct borohydride fuel cells	H. Cheng and K. Scott
1367-1379	Numerical and experimental study of the effect of gas evolution in electrolytic pickling	N. Ipek, N. Lior, M. Vynnycky and F. H. Bark
1381-1389	The influence of bubble shape and the thickness of the wetting film on the incremental electrical resistance caused by the presence of a single bubble in Hall-Héroult cells	A.L. Perron, L.I. Kiss and S. Poncsák
1391-1397	Electrocatalytic oxidation of ethanol on Pt–Mo bimetallic electrodes in acid medium	D. M. dos Anjos, K. B. Kokoh, J.M. Léger, A.R. DE Andrade and P. Olivi, et al.
1399-1405	Cathodic electrosynthesis of iron oxide films for electrochemical supercapacitors	N. Nagarajan and I. Zhitomirsky
1407-1414	Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents	B. Stypuła, J. Banaś, M. Starowicz, H. Krawiec and A. Bernasik, et al.
1415-1426	Electrolytic decomposition of ammonia to nitrogen in a multi-cell-stacked electrolyzer with a self-pH-adjustment function	Kwang-Wook Kim, In-Tae Kim, Geun-Il Park and Eil-Hee Lee
1427-1431	Improved electrochemical redox performance of 2,5-dimercapto-1,3,4-thiadiazole by poly(3-methoxythiophene)	Dong Shu, Jinghua Zhang, Chun He, Yuezhong Meng and Hongyu Chen, et al.
1433-1439	Rutile TiO₂-modified multi-wall carbon nanotubes in TiO₂ film electrodes for dye-sensitized solar cells	Sun Lae Kim, Song-Rim Jang, R. Vittal, Jiwon Lee and Kang-Jin Kim

Volume 37, Number 1 / January 2007

1	Editorial	A.A. Wragg
3-14	Recovery of platinum group metals from secondary materials. I. Palladium dissolution in iodide solutions	R.J. Dawson and G.H. Kelsall
15-20	Electrochemical characterization of perovskite-based SOFC cathodes	S. Bebelis, N. Kotsionopoulos, A. Mai and F. Tietz
21-26	Feasibility of using PtFe alloys as cathodes in direct methanol fuel cells	K. Scott, W. Yuan and H. Cheng
27-32	Characterization of boron-doped diamond electrodes by electrochemical impedance spectroscopy	K. Jüttner and D. Becker
33-39	Modelling natural convection at complex surfaces and solid bodies using electrochemical techniques and flow visualisation	A.A. Wragg and J. Krýsa
41-47	A kinetic study of the electrochemical oxidation of maleic acid on boron doped diamond	Elsa Weiss, Karine Groenen-Serrano, André Savall and Christos Comninellis
49-55	Electrodiffusion diagnostics of the flow and mass transfer inside a network of crossing minichannels	F. Huchet, J. Comiti, J. Tihon, A. Montillet and P. Legentilhomme
57-62	Electrochemical analysis of Taylor vortices	F. Wouahbi, K. Allaf and V. Sobolik
63-70	Characterization of boron doped diamond during oxidation processes: Relationship between electronic structure and electrochemical activity	Simonetta Palmas, Anna M. Polcaro, Annalisa Vacca, Michele Mascia and Francesca Ferrara
71-76	Kinetics of the electrochemical oxidation of organic compounds at BDD anodes: modelling of surface reactions	Michele Mascia, Annalisa Vacca, Simonetta Palmas and Anna Maria Polcaro
77-85	Effect of hydrodynamics on Faradaic current efficiency in a fluorine electrolyser	G. Espinasse, M. Peyrard, F. Nicolas and J.P. Caire
87-93	Computer aided fuel cell design and scale-up, comparison between model and experimental results	G. Squadrito, O. Barbera, G. Giacoppo, F. Urbani and E. Passalacqua
95-101	Electrochemical studies on Sr doped LaMnO₃ and LaCoO₃ layers synthesised in a low-pressure plasma reactor equipped with a convergent nozzle	Frédéric Rousseau, Mehrdad Nikravech, Linda Benabdelmoumène, Cédric Guyon and Daniel Morvan, et al.
103-110	Investigation of the response of separate electrodes in a polymer electrolyte membrane fuel cell without reference electrode	Mathieu Boillot, Caroline Bonnet, Sophie Didierjean and François Lapicque
111-119	Systematic analysis of the direct methanol fuel cell	T. Schultz, U. Krewer, T. Vidaković, M. Pfafferodt and M. Christov, et al.
121-127	Modification of porous carbon tubes with enzymes: application for biofuel cells	K. Servat, S. Tingry, L. Brunel, S. Querelle and M. Cretin, et al.
129-136	Modelling the porous cathode of a SOFC: oxygen reduction mechanism effect	J. Deseure, Y. Bultel, L. Dessemond, E. Siebert and P. Ozil
137-145	Utilization of Nafion^®/conducting polymer composite in the PEM type fuel cells	K. Bouzek, P. Holzhauser, R. Kodym, S. Moravcova and M. Paidar
147-153	Platinum supported on resorcinol–formaldehyde based carbon aerogels for PEMFC electrodes: Influence of the carbon support on electrocatalytic properties	Julien Marie, Sandrine Berthon-Fabry, Marian Chatenet, Eric Chainet and René Pirard, et al.
155-160	Electrochemical behaviour of silver and rhenium electrodes in molten alkali fluorides	Abed M. Affoune, Abedelkader Saila, Jacques Bouteillon and Jean C. Poignet
161-171	Electrical and thermal investigation of a self-breathing fuel cell	S. Sailler, S. Rosini, M.A. Chaib, J.-Y. Voyant and Y. Bultel, et al.
173-179	Electroactive biofilms: new means for electrochemistry	Sophie Dulon, Sandrine Parot, Marie-Line Delia and Alain Bergel
181-186	Cathodic current efficiency in the chlorate process	Josefin Wulff and Ann Cornell

Volume 37, Number 2 / February 2007

187-194	An electrochemical study of corrosive wear of phosphate grinding mill	D. Tao, G.L. Chen and B.K. Parekh
195-201	Pitting corrosion studies of super austenitic stainless steels in natural sea water using dynamic electrochemical impedance spectroscopy	S. Nagarajan, M. Karthega and N. Rajendran
203-208	Propane conversion over a Ru/CGO catalyst and its application in intermediate temperature solid oxide fuel cells	M. Lo Faro, D. La Rosa, G. Monforte, V. Antonucci and A.S. Arico, et al.
209-217	Cr(VI) transport through ceramic ion-exchange membranes for treatment of industrial wastewaters	Yu. S. Dzyazko, A. Mahmoud, F. Lapicque and V.N. Belyakov
219-224	Selective area deposition of Tin–Nickel alloy coating – an alternative for decorative chromium plating	B. Subramanian, S. Mohan and Sobha Jayakrishnan
225-231	Chemical and morphological analyses of zinc powders for alkaline batteries	Martin G. Perez, Matthew J. O’Keefe, Thomas O’Keefe and Douglas Ludlow
233-239	A nucleation and growth study of gold nanowires and nanotubes in polymeric membranes	R.J. Gilliam, S.J. Thorpe and D.W. Kirk
241-248	Electrochemical dissolution and passivation of nickel powder randomly dispersed in a graphite + polypropylene matrix	J. Gregori, J.J. García-Jareño, F. Negrete, M.P. Peña and C. Sanz, et al.
249-253	Effects of stannous ions on the electrochemical performance of the alkaline zinc electrode	Y.F. Yuan, J.P. Tu, H.M. Wu, S.F. Wang and W.K. Zhang, et al.
255-260	Electrochemical membrane reactor for the reduction of carbondioxide to formate	K. Subramanian, K. Asokan, D. Jeevarathinam and M. Chandrasekaran
261-267	Electrochemical behavior of carbon paste electrodes modified with methylene green immobilized on two different X type zeolites	Delia Gligor, Liana M. Muresan, Anca Dumitru and I.C. Popescu
269-274	Structure––reactivity relationships: the oxidation of aliphatic amines on the gold electrode	Teresa Łuczak
275-282	Electrochemical removal of cadmium from dilute aqueous solutions using a rotating cylinder electrode of wedge wire screens	J.M. Grau and J.M. Bisang
283-289	Effects of some additives on the corrosion behaviour and preferred orientations of zinc obtained by continuous current deposition	M. Mouanga, L. Ricq, J. Douglade and P. Berçot
291-296	Kinetics of the electrolytic coloring process on anodized aluminum	Rohan Akolkar, Yar-Ming Wang and Hong-Hsiang (Harry) Kuo
297-301	The use of hydrated nickel–cobalt mixed oxide electrodes for oxidation of aliphatic and aromatic alcohols	T. Vijayabarathi, S. Muzhumathi and M. Noel

Volume 37, Number 3 / March 2007

303-310	Mathematical model to evaluate the ohmic resistance caused by the presence of a large number of bubbles in Hall-Héroult cells	A.L. Perron, L.I. Kiss and S. Poncsák
311-314	Phase structure and electrochemical properties of Ml_1−xMg_xNi_2.78Co_0.50Mn_0.11Al_0.11 hydrogen storage alloys	Z. Zhang, S. M. Han, W. Guan, Y. Li and Y. W. Liu, et al.
315-324	Calculation of temperature transients in pulse electrochemical machining (PECM)	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
325-330	Sinapinic acid as Al–2.5Mg alloy corrosion inhibitor in sodium chloride solution	L. Vrsalović, M. Kliškić, J. Radošević and S. Gudić
331-337	Electrochemical oxidation of p-sulfonated calix[8]arene	MING CHEN, HUI-LAN WANG, JING GU and GUO-WANG DIAO
339-344	Redox and transport behaviors of Cu(I) ions in TMHA-Tf₂N ionic liquid solution	Takuma Katase, Kuniaki Murase, Tetsuji Hirato and Yasuhiro Awakura
345-351	Influence of bath composition and pH on the electrocodeposition of alumina nanoparticles and copper	Andreas Bund and Denny Thiemig
353-358	Interlayer defect evolution in an organic coating system on steel under hydromechanical loading	A. Miszczyk, M. Szociński and K. Darowicki
359-365	Electrochemical hydrogen pump for recirculation of hydrogen in a fuel cell stack	Frano Barbir and Haluk Görgün
367-373	Electrochemical oxidation of sulfide ion at a boron-doped diamond anode	Katie Waterston, Dorin Bejan and Nigel J. Bunce
375-383	Comparative study of hydrogen peroxide electro-generation on gas-diffusion electrodes in undivided and membrane cells	G.R. Agladze, G.S. Tsurtsumia, B.-I. Jung, J.-S. Kim and G. Gorelishvili
385-393	The “In-cell” and “Ex-cell” Fenton treatment of phenol, 4-chlorophenol and aniline	G. R. Agladze, G. S. Tsurtsumia, B.-I. Jung, J.-S. Kim and G. Gorelishvili
395-404	Kinetics of the electrochemical deposition of sulfur from sulfide polluted brines	B.G. Ateya, F.M. AlKharafi, A.S. Alazab and A.M. Abdullah
405-413	Stability of spontaneous passive films on high strength Mo-containing stainless steels in aqueous solutions	F. El-Taib Heakal, A.A. Ghoneim and A.M. Fekry

Volume 37, Number 4 / April 2007

415-420	TiO₂-mediated photoelectrochemical decoloration of methylene blue in the presence of peroxodisulfate	E. Valatka and Ž. Kulėšius
421-427	Variation of LiNiO₂ cathode properties with substitution of Ga, In and Tl by the combustion method	MyoungYoup Song, SungNam Kwon, IkHyun Kwon and HyeRyoung Park
429-438	A model for mass transport in the electrolyte membrane of a DMFC	Thomas Vernersson and Göran Lindbergh
439-449	Surface and electrochemical characterization of pitting corrosion behaviour of 304 stainless steel in ground water media	D. Gopi, S. Manimozhi, K. M. Govindaraju, P. Manisankar and S. Rajeswari
451-459	Oxidation of herbicides by in situ synthesized hydrogen peroxide and fenton’s reagent in an electrochemical flow reactor: study of the degradation of 2,4-dichlorophenoxyacetic acid	Carla Badellino, Christiane Arruda Rodrigues and Rodnei Bertazzoli
461-466	Activity of gold towards methylamine electrooxidation	Teresa Łuczak
467-471	Electrodeposition of gallium onto vitreous carbon	D. O. Flamini, S. B. Saidman and J. B. Bessone
473-481	Response surface modeling and optimization to study the influence of deposition parameters on the electrodeposition of Cu–Zn alloys in citrate medium	F. B. A. Ferreira, F. L. G. Silva, A. S. Luna, D. C. B. Lago and L. F. Senna
483-489	Anomalous codeposition of Co–Ni: alloys from gluconate baths	M. M. Kamel
491-497	Influence of tramadol [2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrate] on corrosion inhibition of mild steel in acidic media	R. A. Prabhu, A. V. Shanbhag and T. V. Venkatesha
499-504	Sodium molybdate—a possible alternate additive for sodium dichromate in the electrolytic production of sodium chlorate	Ming Li, Zbigniew Twardowski, Felix Mok and Norbert Tam
505-510	Electrochemical characterization of the electrooxidation of methanol, ethanol and formic acid on Pt/C and PtRu/C electrodes	Zhaolin Liu and Liang Hong
511-517	Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva	Alain Robin and Jeferson Paulino Meirelis
519-525	Corrosion protection of carbon steel and copper by polyaniline and poly(ortho-methoxyaniline) films in sodium chloride medium. Electrochemical and morphological study	R. Vera, R. Schrebler, P. Cury, R. Del Río and H. Romero
527-532	Azobenzene-modified oxygen-fed graphite/PTFE electrodes for hydrogen peroxide synthesis	J. C. Forti, J. A. Nunes, M. R. V. Lanza and R. Bertazzoli

Volume 37, Number 5 / May 2007

533-541	Effect of some polymeric materials on the corrosion behaviour of tin in succinic acid solution	E.E. Foad El-Sherbini, S.O. Moussa, S.S. Abd El-Rehim and E. Hamed
543-548	Matching ratio between positive and negative electrodes for double-layer capacitors	Yuehua Wen, Jie Cheng, Gaoping Cao and Yusheng Yang
549-555	Electrodeposition of AuCo alloys and multilayers	M. Guan and E.J. Podlaha
557-566	Electrocatalytic activity of copper alloys for NO
567-573	Synthesis and electrochemical evaluation of carbon coated Cu₆Sn₅ alloy-graphite composite lithium battery anodes	N. Jayaprakash, N. Kalaiselvi and C. H. Doh
575-582	Electrodeposition of copper–magnetite magnetic composite films	A. Roldan, E. Gómez, S. Pané and E. Vallés
583-592	Electrochemical oxidation of an acid dye by active chlorine generated using Ti/Sn₍₁₋
593-604	Conducting poly(
605-616	Adaptive, multi-parameter battery state estimator with optimized time-weighting factors	Mark Verbrugge
617-624	Electro-oxidation of rutin in the presence of
625-630	Selective electrochemical reactions of an alumina hydrate crystallization inhibitor	Nicolas-Alexandre Bouchard, Anne Brisach-Wittmeyer, Raymond Breault and Hugues Ménard
631-636	Electrochemical behavior of a new
637-642	Characterization of (PVDF + LiFePO₄) solid polymer electrolyte	Ch. V. Subba Reddy, M. Chen, W. Jin, Q. Y. Zhu and W. Chen, et al.
643-651	Effect of tartaric acid in the electrodeposition of zinc	J. Torrent-Burgués and E. Guaus

Volume 37, Number 6 / June 2007

653-660	Electrochemical oxidation of alcoholamines at gold	Teresa Łuczak
661-668	Some environmentally friendly formulations as inhibitors for mild steel corrosion in sulfuric acid solution	M. S. Morad
669-674	Current efficiency and kinetics of cobalt electrodeposition in acid chloride solutions. Part I: The influence of current density, pH and temperature	O. E. Kongstein, G. M. Haarberg and J. Thonstad
675-680	Current efficiency and kinetics of cobalt electrodeposition in acid chloride solutions. Part II: the influence of chloride and sulphate concentrations	O. E. Kongstein, G. M. Haarberg and J. Thonstad
681-689	Inhibitors with biocidal functionalities to mitigate corrosion on mild steel in natural aqueous environment	D. Gopi, K. M. Govindaraju, S. Manimozhi, S. Ramesh and S. Rajeswari
691-698	Electrochemical oxidation of 4-chlorophenol and its by-products using Ti/Ru_0.3M_0.7O₂ (M = Ti or Sn) anodes: preparation route versus degradation efficiency	R. D. Coteiro and A. R. De Andrade
699-704	Mathematical characterization of internal pressure variation of Ni-MH batteries	Zhong-qiang Shan, Wei Hu, Zheng Chen and Jian-hua Tian
705-710	Voltammetric studies of a novel bicopper complex modified glassy carbon electrode for the simultaneous determination of dopamine and ascorbic acid	Mingyan Wang, Xingyou Xu and Jian Gao
711-716	Electro-osmotic drag of methanol in proton exchange membranes	T. Tschinder, T. Schaffer, S. D. Fraser and V. Hacker
717-721	Influence of electrode preparation on the electrochemical behaviour of carbon-based supercapacitors	V. Ruiz, C. Blanco, M. Granda, R. Menéndez and R. Santamaría
723-728	The electrochemistry of TEMPO-mediated oxidation of alcohols in ionic liquid	R. Barhdadi, C. Comminges, A. P. Doherty, J. Y. Nédélec and S. O’Toole, et al.
729-735	Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties	Metin Ak, Asuman Durmus and Levent Toppare
737-746	Electrochemical impedance and conductivity measurements in a heterogeneous Fe powder particle—electrolyte system with or without electrochemical reaction	M. F. Gál, J. Híveš, M. Benová and M. Gálová
747-752	Electrochemical applications of net-benefit analysis via Bayesian probabilities	T. Z. Fahidy
753-758	The corrosion and electrochemical behaviour of pure aluminium in alkaline methanol solutions	Jun-Bo Wang, Jian-Ming Wang, Hai-Bo Shao, Jian-Qing Zhang and Chu-Nan Cao
759-764	Effects of mechanical grinding on initial activation and rate capability of Zr–Ti based Laves phase alloy electrode	Masao Matsuoka and Kazuaki Tamura

Volume 37, Number 7 / July 2007

765-787	Hydrogen generation at irradiated oxide semiconductor–solution interfaces	Krishnan Rajeshwar
789-797	Electrochemical impedance spectroscopic study of barrier layer thinning in nanostructured aluminium	G. D. Sulka, V. Moshchalkov, G. Borghs and J.-P. Celis
799-803	Influence of ammonia concentration on anodic deposition of nickel oxide	Guo-qu Zheng, Hua-zhen Cao and Li-feng Zheng
805-812	Deposition and characterization of nickel–niobium composite electrocoatings	Alain Robin and R. Q. Fratari
813-817	RF oxygen plasma treatment of activated carbon electrodes for electrochemical capacitors	Chuen-Chang Lin and Chia-Cheng Yen
819-826	The effect of poly(vinyl caprolactone-co-vinyl pyridine) and poly(vinyl imidazol-co-vinyl pyridine) on the corrosion of steel in H₃PO₄ media	M. Benabdellah, A. Ousslim, B. Hammouti, A. Elidrissi and A. Aouniti, et al.
827-833	Highly selective and sensitive Th⁴⁺-PVC-based membrane sensor based on 2-(diphenylphosphorothioyl)-N′,N′-diphenylacetamide	M. R. Ganjali, P. Norouzi, F. Faridbod, S. Riahi and M. R. Yaftian, et al.
835-841	Opuntia-Ficus-Indica (Nopal) mucilage as a steel corrosion inhibitor in alkaline media	Andrés A. Torres-Acosta
843-852	Multicriteria optimization of mechanical and morphological properties of chromium electrodeposits under reverse pulse plating	L. Hallez, M. De Petris-Wery, M. Assoul, M. Feki and H. F. Ayedi
853-859	Fabrication of a novel holmium(III) PVC membrane sensor based on 4-chloro-1,2-bis(2-pyridinecarboxamido)benzene as a neutral ionophore	Hassan Ali Zamani, Mohammad Reza Ganjali, Parviz Norouzi and Soraia Meghdadi
861-870	Oxidation kinetics of 4-methylanisole in methanol solution at carbon electrodes	Anis Attour, Sabine Rode, Tomas Bystron, Michael Matlosz and François Lapicque
871-875	Electrochemical hydriding of nanocrystalline TiFe alloys	B. Abrashev, S. Bliznakov, T. Spassov and A. Popov

Volume 37, Number 8 / August 2007

877-886	Effect of leakage currents on the primary current distribution in bipolar electrochemical reactors	E. R. Henquín and J. M. Bisang
887-892	Influence of current density on oxygen transfer in an electroflotation cell	L. Ben Mansour, K. Kolsi and I. Ksentini
893-898	Rapid determination of triazophos using acetylcholinesterase biosensor based on sol–gel interface assembling multiwall carbon nanotubes	Dan Du, Jie Cai, Dandan Song and Aidong Zhang
899-904	Effects of K₄Fe(CN)₆ on electroless copper plating using hypophosphite as reducing agent	Xueping Gan, Yating Wu, Lei Liu and Wenbin Hu
905-912	Roles of adsorbed OH and adsorbed H in the oxidation of hydrogen and the reduction of UO
913-919	Ameliorating effect of silica addition in the anode-catalyst layer of the membrane electrode assemblies for polymer electrolyte fuel cells	A. K. Sahu, G. Selvarani, S. Pitchumani, P. Sridhar and A. K. Shukla
921-931	Prediction of shunt currents in a bipolar electrolyzer stack by difference calculus	Ravichandra S. Jupudi, Guillermo Zappi and Richard Bourgeois
933-940	Corrosion inhibition studies of copper in highly concentrated NaCl solutions	Omar Abdullah Hazzazi
941-948	Voltammetric investigation of polyelectrolyte-Cu(II) complexes	A. Gökçeören, C. Erbil and E. Sezer
949-959	Electrochemical investigations on composite iron electrodes	N. Comisso and G. Mengoli
961-969	Electrochemical investigation of the passive behaviour of biomaterials based on Ag–Sn and Cu–Zn–Al in carbonate buffer in the absence and presence of chloride	Valéria A. Alves, Luís A. da Silva, Luís F. de F. Santos, Dane T. Cestarolli and Alexandre Rossi, et al.
971-982	A thin-film/agglomerate model of a proton-exchange-membrane fuel cell cathode catalyst layer with consideration of solid-polymer-electrolyte distribution	Ken-Ming Yin
983	Conducting poly(

Volume 37, Number 9 / September 2007

985-990	Comparative study of chemical and electrochemical Fenton treatment of organic pollutants in wastewater	G. R. Agladze, G. S. Tsurtsumia, B. -I. Jung, J. -S. Kim and G. Gorelishvili
991-1000	Studies on electrodeposited nickel–yttria doped ceria composite coatings	S. T. Aruna, V. K. William Grips, V. Ezhil Selvi and K. S. Rajam
1001-1008	The growth kinetics and properties of potentiodynamically formed thin oxide films on aluminium in citric acid solutions	D. Hasenay and M. Šeruga
1009-1014	Straightforward energetic approach to studies of the corrosion behaviour of nano-copper thin-layer coatings	Maria Trzaska and Zdzislaw Trzaska
1015-1019	Development of nickel incorporated aluminum alloy matrix as an efficient sacrificial anode	S. M. A. Shibli, V. S. Dilimon and Asha Mohan
1021-1026	Use of silver nanoparticles as an electron transfer facilitator in electrochemical ligand-binding of haemoglobin	Saeed Rezaei-Zarchi, Ali Akbar Saboury, Parviz Norouzi, Jun Hong and Shahin Ahmadian, et al.
1027-1037	Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys	S. Feliu, J. A. González, V. López, M. J. Bartolome and E. Escudero, et al.
1039-1046	Biophotofuel cell (BPFC) generating electrical power directly from aqueous solutions of biomass and its related compounds while photodecomposing and cleaning	Junichi Nemoto, Mizuki Horikawa, Keita Ohnuki, Toshiyuki Shibata and Hirohito Ueno, et al.
1047-1053	Ionic permeability of polymeric membranes: part 1—steady state transport of binary electrolytes through polyethylene films	E. E. Oguzie, A. I. Onuchukwu and U. J. Ekpe
1055-1061	Effect of synthesis routes on the performance of hydrated Mn(IV) oxide-exfoliated graphite composites for electrochemical capacitors	Chuanyun Wan, Kazuhisa Azumi and Hidetaka Konno
1063-1068	A tubular microbial fuel cell	K. Scott, C. Murano and G. Rimbu
1069-1075	Characterization of reactive magnetron sputtered nanocrystalline titanium nitride (TiN) thin films with brush plated Ni interlayer	B. Subramanian and M. Jayachandran
1077-1084	Catalysed titanium mesh electrodes for ethylene glycol fuel cells	Raghuram Chetty and Keith Scott
1085-1091	A parametric study of a platinum ruthenium anode in a direct borohydride fuel cell	N. Duteanu, G. Vlachogiannopoulos, M. R. Shivhare, E. H. Yu and Keith Scott

Volume 37, Number 10 / October 2007

1093-1097	Influence of concentrations of copper, levelling agents and temperature on the diffusion coefficient of cupric ions in industrial electro-refining electrolytes	O. Gladysz, P. Los and E. Krzyzak
1099-1106	Electrochemical behavior of aluminum bronze in sulfate-chloride media	Waheed A. Badawy, Rabab M. El-Sherif and Hassan Shehata
1107-1117	Development of a continuous reactor for the electro-reduction of carbon dioxide to formate – Part 2: Scale-up	Hui Li and Colin Oloman
1119-1128	Surface active state involvement in electrocatalytic reductions at copper in acid solution	L. D. Burke and R. Sharna
1129-1135	Preparation and characterization of RuO₂ ·
1137-1144	Electrochemical treatment of ammonia in wastewater by RuO₂–IrO₂–TiO₂/Ti electrodes	Jinluan Chen, Hanchang Shi and Jinghua Lu
1145-1152	Electrochemical study of the activating solution for electroless plating of polymers	M. García-Gabaldón, V. Pérez-Herranz, J. García-Antón and J. L. Guiñón
1153-1162	Corrosion inhibition of aluminium in acid solutions by some imidazoline derivatives	M. A. Quraishi, M. Z. A. Rafiquee, Sadaf Khan and Nidhi Saxena
1163-1169	Application of a novel gelled-electrolyte in valve-regulated lead-acid batteries with tubular positive plates	Zheng Tang, Jian-Ming Wang, Xian-Xian Mao, Quan-Qi Chen and Chen Shen, et al.
1171-1176	Direct reduction of As(V) physically attached to a graphite electrode mediated by Fe(III)	G. Cepriá, S. Hamida, F. Laborda and J. R. Castillo
1177-1182	A quartz crystal microbalance study of the kinetics of interaction of benzotriazole with copper	F. M. Al Kharafi, A. M. Abdullah and B. G. Ateya
1183-1190	Effect of ascorbic acid on mild steel dissolution in sulphuric acid solution investigated by electrochemical polarization and surface probe techniques	E. E. Oguzie, Y. Li and F. H. Wang
1191-1200	Effect of sulfur-containing amino acids on the corrosion of mild steel in sulfide-polluted sulfuric acid solutions	M. S. Morad

Volume 37, Number 11 / November 2007

1201	Editorial	A. A. Wragg
1203-1217	Models of Hypochlorite production in electrochemical reactors with plate and porous anodes	C. Y. Cheng and G. H. Kelsall
1219-1226	Activity and long-term stability of PEDOT as Pt catalyst support for the DMFC anode	J.-F. Drillet, R. Dittmeyer and K. Jüttner
1227-1236	A novel method for the preparation of bi-metallic (Pt–Au) nanoparticles on boron doped diamond (BDD) substrate: application to the oxygen reduction reaction	B. El Roustom, G. Siné, G. Fóti and Ch. Comninellis
1237-1243	Investigation of optimal conditions for zinc electrowinning from aqueous sulfuric acid electrolytes	P. Guillaume, N. Leclerc, C. Boulanger, J. M. Lecuire and François Lapicque
1245-1259	Modelling and experimental validation of a high temperature polymer electrolyte fuel cell	K. Scott, S. Pilditch and M. Mamlouk
1261-1270	Strategies for the determination of the convective-diffusion limiting current from steady state linear sweep voltammetry	C. Ponce-de-León, C. T. J. Low, G. Kear and F. C. Walsh
1271-1278	On the potential utility of 2 × 2 contingency tables in electrochemical engineering	Thomas Z. Fahidy
1279-1286	Silver electrowinning from silver(I)–calixarene complexes by two-phase electrolysis	V. Stanković, I. Duo, Ch. Comninellis and F. Zonnevijlle
1287-1302	Effects of non-linear kinetics on free convection in an electrochemical cell with a porous separator	K. I. Borg, K. E. Birgersson and F. H. Bark
1303-1312	Potential and current density distributions along a bipolar electrode	R. Kodým, K. Bouzek, D. Šnita and J. Thonstad
1313-1319	Effect of oxidisable substrates on the photoelectrocatalytic properties of thermally grown and particulate TiO₂ layers	Josef Krýsa, Martin Zlámal and Georg Waldner
1321-1328	Electrodiffusion diagnostics of laminar flows using the delay-time method	S. Martemianov, Yu. K. Evdokimov and X. Adolphe
1329-1335	Electrochemical pre-treatment of effluents containing chlorinated compounds using an adsorbent	N. W. Brown and E. P. L. Roberts
1337-1344	Electrochemical mineralization of sodium dodecylbenzenesulfonate at boron doped diamond anodes	Elsa Weiss, Karine Groenen-Serrano and André Savall
1345-1355	Time averaged temperature calculations in pulse electrochemical machining. Part I: theoretical basis	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
1357-1365	Influence of the operating conditions on the electrochemical disinfection process of natural waters at BDD electrodes	Simonetta Palmas, Anna Maria Polcaro, Annalisa Vacca, Michele Mascia and Francesca Ferrara
1367-1373	Influence of ultrasound irradiation on the adsorption of bovine serum albumin on copper	Edilson M. Pinto, David M. Soares and Christopher M. A. Brett
1375-1381	Surface characterization of zincated aluminium and selected alloys at the early stage of the autocatalytic electroless nickel immersion process	Enam Khan, C. F. Oduoza and T. Pearson
1383-1387	Hydrogen fuel cells for cars and buses	L. J. J. Janssen
1389-1394	Adsorption of thallium cations on RuO₂–TiO₂ electrodes	S. Ferro, M. Donatoni, A. De Battisti and V. N. Andreev

Volume 37, Number 12 / December 2007

1395	Editorial	A. A. Wragg
1397	Foreword	Christoph Hartnig
1399-1411	Carbon supported Ru–Se as methanol tolerant catalysts for DMFC cathodes. Part II: preparation and characterization of MEAs	K. Wippermann, B. Richter, K. Klafki, J. Mergel and G. Zehl, et al.
1413-1427	Activity, selectivity, and methanol tolerance of novel carbon-supported Pt and Pt₃Me (Me = Ni, Co) cathode catalysts	L. Colmenares, E. Guerrini, Z. Jusys, K. S. Nagabhushana and E. Dinjus, et al.
1429-1437	Influence of carbon support on the performance of platinum based oxygen reduction catalysts in a polymer electrolyte fuel cell	Jörg Kaiser, Pavel A. Simonov, Vladimir I. Zaikovskii, Christoph Hartnig and Ludwig Jörissen, et al.
1439-1446	Electroreduction of oxygen at tungsten oxide modified carbon-supported RuSe_x nanoparticles	P. J. Kulesza, K. Miecznikowski, B. Baranowska, M. Skunik and A. Kolary-Zurowska, et al.
1447-1454	Realising a reference electrode in a polymer electrolyte fuel cell by laser ablation	Dietmar Gerteisen
1455-1462	Ruthenium selenide catalysts for cathodic oxygen reduction in direct methanol fuel cells	Alexander Racz, Petra Bele, Carsten Cremers and Ulrich Stimming
1463-1474	Physical and electrochemical characterization of catalysts for oxygen reduction in fuel cells	C. Christenn, G. Steinhilber, M. Schulze and K. A. Friedrich
1475-1484	Carbon supported Ru–Se as methanol tolerant catalysts for DMFC cathodes. Part I: preparation and characterization of catalysts	G. Zehl, P. Bogdanoff, I. Dorbandt, S. Fiechter and K. Wippermann, et al.
1485-1494	Activity of selenium modified ruthenium-electrodes and determination of the real surface area	Nicky Bogolowski, Tina Nagel, Barbora Lanova, Siegfried Ernst and Helmut Baltruschat, et al.
1495-1502	Investigation of structure and ORR reactivity of fuel cell catalysts by in-situ STM	R. Hiesgen, D. Eberhardt, E. Aleksandrova and K. A. Friedrich
1503-1513	Development of platinum-free catalyst and catalyst with low platinum content for cathodic oxygen reduction in acidic electrolytes	M. R. Tarasevich, V. A. Bogdanovskaya, L. N. Kuznetsova, A. D. Modestov and B. N. Efremov, et al.
1515-1522	Reductive annealing for generating Se doped 20 wt% Ru/C cathode catalysts for the oxygen reduction reaction	K. S. Nagabhushana, E. Dinjus, H. Bönnemann, V. Zaikovskii and C. Hartnig, et al.

Volume 38, Number 1 / January 2008

1-5	Effects of viscosity-dependent diffusion in the analysis of rotating disk electrode data	Joseph H. Han, Audrey Bowen, Tatyana N. Andryushchenko, Radek P. Chalupa and Anne E. Miller, et al.
7-16	Kinetic modelling of the electrochemical mineralization of organic pollutants for wastewater treatment	Agnieszka Kapałka, György Fóti and Christos Comninellis
17-24	Methanol and formic acid oxidation in zinc electrowinning under process conditions	M. Wesselmark, C. Lagergren and G. Lindbergh
25-30	Electrochemical reduction of CI sulphur black 1—correlation between electrochemical parameters and colour depth in exhaust dyeing	T. Bechtold, A. Turcanu and W. Schrott
31-37	Optimization of Ti/SnO₂–Sb₂O₅ anode preparation for electrochemical oxidation of organic contaminants in water and wastewater	Richard J. Watts, Megan S. Wyeth, Dennis D. Finn and Amy L. Teel
39-42	Li-LiFePO₄ rechargeable polymer battery using dual composite polymer electrolytes	H. H. Sumathipala, J. Hassoun, S. Panero and B. Scrosati
43-50	Electrochemical behaviour of benzylamine, 2-phenylethylamine and 4-hydroxyphenylethylamine at gold. A comparative study	Teresa Łuczak
51-62	Direct methanol fuel cells with reticulated vitreous carbon, uncompressed graphite felt and Ti mesh anodes	Tommy T. Cheng and Előd L. Gyenge
63-69	Electrochemical synthesis and characterization of TiO₂-polyaniline composite layers	M. Ilieva, S. Ivanov and V. Tsakova
71-76	Undecyl substitution in imidazole and its action on corrosion inhibition of copper in aerated acidic chloride media	Da-quan Zhang, Li-xin Gao, Guo-ding Zhou and Kang Yong Lee
77-82	Comparative study of lead-acid batteries for photovoltaic stand-alone lighting systems	B. Hariprakash, S. K. Martha, S. Ambalavanan, S. A. Gaffoor and A. K. Shukla
83-91	Electrodeposition of CoWP film II. Effect of electrolyte concentration	S. M. S. I. Dulal, Chee Burm Shin, Joon Yong Sung and Chang-Koo Kim
93-100	Electrochemical synthesis of peroxomonophosphate using boron-doped diamond anodes	E. Weiss, C. Sáez, K. Groenen-Serrano, P. Cañizares and A. Savall, et al.
101-108	Electrocatalytic oxidation of nitrophenols in aqueous solution using modified PbO₂electrodes	Huiling Liu, Yuan Liu, Cheng Zhang and Rongshu Shen
109-114	P(VDF-HFP)-based micro-porous composite polymer electrolyte prepared by in situ hydrolysis of titanium tetrabutoxide	Z. H. Li, H. P. Zhang, P. Zhang and Y. P. Wu
115-125	Electrodeposition of zinc–iron alloy from an alkaline bath in the presence of sorbitol	L. L. Barbosa, Guilherme Antonio Finazzi, P. C. Tulio and I. A. Carlos
127-129	Dr. J. Peter Millington 1937–2006

Volume 38, Number 2 / February 2008

131-149	Modeling a perforated bipole trickle bed electrochemical reactor for the generation of alkaline peroxide	Neeraj Gupta and Colin W. Oloman
151-159	Mixed first and zero order kinetics in the electrooxidation of sulfamethoxazole at a boron-doped diamond (BDD) anode	Shuhuan Li, Dorin Bejan, M. S. McDowell and Nigel J. Bunce
161-166	Dynamic behaviour of electrochemical reactors for a step change in inlet concentration under potentiostatic control according to the dispersion model	J. M. Bisang
167-173	Galvanostatic Pb(II) removal from a simulated wastewater by using a stainless-steel wool cathode in a flow-through cell: a factorial-design study	Lucio C. Almeida, Luiz H. S. Gasparotto, Nerilso Bocchi, Romeu C. Rocha-Filho and Sonia R. Biaggio
175-186	Effect of alkyl chain length on the electrochemical perfluorination of
187-188	Effect of alkyl chain length on the electrochemical perfluorination of
189-195	All-solid secondary polyaniline-zinc battery	P. Sivaraman, A. P. Thakur, R. K. Kushwaha, D. Ratna and A. B. Samui
197-202	Еlectrochemical hydriding/dehydriding of nanocrystalline Mg₂₋
203-206	Photoinduced synthesis of CdTe nanoparticles using Te-modified gold electrode in poly(vinyl pyrrolidone)-containing electrolyte	Sunyoung Ham, Ki-Jung Paeng, Jinhyuck Park, Noseung Myung and Si-Kwan Kim, et al.
207-214	Comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D	J. W. Chang, L. M. Peng, X. W. Guo, A. Atrens and P. H. Fu, et al.
215-224	Influence of cobalt ions on the anodic oxidation of a lead alloy under conditions typical of copper electrowinning	T. Nguyen, N. Guresin, M. Nicol and A. Atrens
225-229	EIS investigation of passive film formation on mild steel in oxalic acid solution	A. Ashrafi, M. A. Golozar and S. Mallakpour
231-238	Effects of thiourea and urea on zinc–cobalt electrodeposition under continuous current	M. Mouanga, L. Ricq and P. Berçot
239-244	Role of Mo⁶⁺ during nickel electrodeposition from sulfate solutions	U. S. Mohanty, B. C. Tripathy, P. Singh, S. C. Das and V. N. Misra
245-249	Effect of surfactant BAS on MoS₂ codeposition behaviour	L. M. Wang
251-257	Electrochemical behavior of magnesium alloys AZ91D, AZCe2, and AZLa1 in chloride and sulfate solutions	Guohua Wu, Yu Fan, Andrej Atrens, Chunquan Zhai and Wenjiang Ding
259-268	Electrochemical deposition of platinum nanoparticles on different carbon supports and conducting polymers	Sonia Domínguez-Domínguez, Joaquín Arias-Pardilla, Ángel Berenguer-Murcia, Emilia Morallón and Diego Cazorla-Amorós
269-271	Photo-selective chemical etching of InAs and GaSb to manufacture microscopic mirrors	G. Huerta-Cuéllar, S. Guel-Sandoval, F. De Anda, V. H. Méndez and B. Torres-Loredo, et al.

Volume 38, Number 3 / March 2008

273-277	Using an electrode with renewable surface for study of silver reduction from acid thiourea solutions	A. G. Zelinsky and S. K. Ershov
279-287	Corrosion inhibition of mild steel in acidic medium using hydrazide derivatives	A. V. Shanbhag, T. V. Venkatesha, R. A. Prabhu, R. G. Kalkhambkar and G. M. Kulkarni
289-295	Some new triazole derivatives as inhibitors for mild steel corrosion in acidic medium	Wei-hua Li, Qiao He, Sheng-tao Zhang, Chang-ling Pei and Bao-rong Hou
297-308	Hydrogen filter press electrolyser modelled by coupling Fluent
309-313	Effect of temperature on nickel electrodeposition from a nickel sulfamate electrolyte	M. Saitou, S. Oshiro and S. M. Asadul Hossain
315-320	Initial stages of nucleation of molybdenum and tungsten carbide phases in tungstate–molybdate–carbonate melts	V. Malyshev, A. Gab and M. Gaune-Escard
321-327	Use of experimental design to empirically model atmospheric corrosion of galvanised steel	Emilie Dubuisson, Sabine Szunerits, Jean-Pierre Caire, Philippe Lavie and Sarah Cordier
329-337	A comparison of electrochemical degradation of phenol on boron doped diamond and lead dioxide anodes	Elsa Weiss, Karine Groenen-Serrano and André Savall
339-347	A thin-gap cell for selective oxidation of 4-methylanisole to 4-methoxy-benzaldehyde-dimethylacetal	Anis Attour, Sabine Rode, Athanassios Ziogas, Michael Matlosz and François Lapicque
349-355	Rhodium stabilized Prussian Blue-modified graphite electrodes for H₂O₂ amperometric detection	Laura Mureşan, Graziella Liana Turdean and Ionel Cătălin Popescu
357-362	Effect of diffusion-layer porosity on the performance of polymer electrolyte fuel cells	G. Selvarani, A. K. Sahu, P. Sridhar, S. Pitchumani and A. K. Shukla
363-369	Cathodic processes in the leaching and electrochemistry of covellite in mixed sulfate–chloride media	M. S. Lee, M. J. Nicol and P. Basson
371-375	NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells	Namsin Park, Takeyuki Shiraishi, Kazuyoshi Kamisugi, Yoshitaka Hara and Keita Iizuka, et al.
377-384	The oxide electrochemistry of ruthenium and its relevance to trench liner applications in damascene copper plating	L. D. Burke, N. S. Naser and R. Sharna
385-394	Electroless deposition of ternary Ni–P alloy coatings containing tungsten or nano-scattered alumina composite on steel	Abdel Salam Hamdy, M. A. Shoeib, H. Hady and O. F. Abdel Salam
395-402	Sonoelectrochemical (20 kHz) production of Co₆₅Fe₃₅ alloy nanoparticles from Aotani solutions	M. Dabalà, B. G. Pollet, V. Zin, E. Campadello and T. J. Mason
403-408	Electroreduction of carbonyl compounds at a Ti/ceramic TiO₂ cathode	D. Vasudevan and C. J. Kennady
409-413	A strategy for the electro-organic synthesis of new hydrocaffeic acid derivatives	Habibeh Haddad Dabaghi, Abdolmajid Bayandori Moghaddam, Mahmood Kazemzad, Rassoul Dinarvand and Fezze Aryanasab, et al.
415-424	Estimation of the characteristic parameters of proton exchange membrane fuel cells under normal operating conditions	Ákos Kriston and György Inzelt

Volume 38, Number 4 / April 2008

425-436	Chromium electrodeposition from Cr(VI) low concentration solutions	Claudio Fontanesi, Roberto Giovanardi, Maria Cannio and Ercole Soragni
437-444	Influence of alloying and microstructure on the electrochemical hydriding of TiNi-based ternary alloys	Boris Drenchev, Tony Spassov and Dimitar Radev
445-450	Tolerance limit of chloride for steel in blended cement mortar using the cyclic polarisation technique	Ha-Won Song, V. Saraswathy, S. Muralidharan and K. Thangavel
451-456	An empirical fuel cell polarization curve fitting equation for small current densities and no-load operation	S. D. Fraser and V. Hacker
457-468	An investigation of copper interconnect deposition bath ageing by electrochemical impedance spectroscopy	C. Gabrielli, P. Moçotéguy, H. Perrot, D. Nieto-Sanz and A. Zdunek
469-476	Electrochemical behaviour of phenylethanolamine at gold in aqueous solution	Teresa Łuczak
477-482	Electrochemical performance of chemically synthesized oligo-indole as a positive electrode for lithium rechargeable batteries	Kwang Sun Ryu and Kwang Man Kim
483-490	Supported Pt and Pt–Ru catalysts prepared by potentiostatic electrodeposition for methanol electrooxidation	J. M. Sieben, M. M. E. Duarte and C. E. Mayer
491-496	Radical formation in polymer electrolyte fuel cell components as studied by ESR spectroscopy	Masahiro Kitazawa, Atsuko Y. Nosaka and Yoshio Nosaka
497-505	Current and voltage distributions in a tubular solid oxide fuel cell (SOFC)	J.-M. Klein, Y. Bultel, M. Pons and P. Ozil
507-514	Carbon nanocapsules as an electrocatalyst support for the oxygen reduction reaction in alkaline electrolyte	Y. M. Lin, Y. M. Chang, P. W. Wu, P. Lin and Y. Y. Li, et al.
515-522	Immobilization of dendrimer-encapsulated platinum nanoparticles on pretreated carbon-fiber surfaces and their application for oxygen reduction	J. Ledesma-García, I. L. Escalante García, Francisco J. Rodríguez, Thomas W. Chapman and Luis A. Godínez
523-529	Electrochemical synthesis of 2,2-dinitropropanol	Tedd E. Lister and Robert V. Fox
531-536	Copper plating on titanium alloy 6-2-4-2 using an in situ high voltage pulse followed by plate-up	R. J. von Gutfeld and Alan C. West
537-542	Electrodeposition of tin and antimony in 1-ethyl- 3-methylimidazolium tetrafluoroborate ionic liquid	Wenzhong Yang, Hui Cang, Yongming Tang, Jintang Wang and Yuanxiang Shi
543-550	PEO–PPO–PEO triblock copolymer/Nafion blend as membrane material for intermediate temperature DMFCs	Jin Hu, Vincenzo Baglio, Vincenzo Tricoli, Antonino S. Aricò and Vincenzo Antonucci
551-560	Time averaged temperature calculations in pulse electrochemical machining, part II: numerical simulation	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
561-567	Electrochemical studies on [M(diars)₂X₂]⁺ where [X = Cl, Br; M = Os, Re, Ru, Rh; diars = o-phenylenebis (dimethylarsine)] at bare and Nafion modified electrodes	A. Suganthi, M. Rajarajan and R. Murugesan
569-577	Influence of lead dioxide surface films on anodic oxidation of a lead alloy under conditions typical of copper electrowinning	T. Nguyen and A. Atrens
579-581	An aqueous rechargeable lithium battery based on LiV₃O₈ and Li[Ni_1/3Co_1/3Mn_1/3]O₂	G. J. Wang, L. J. Fu, B. Wang, N. H. Zhao and Y. P. Wu, et al.

Volume 38, Number 5 / May 2008

583-590	A 2^7-3 fractional factorial optimization of polybenzimidazole based membrane electrode assemblies for H₂/O₂ fuel cells	R. Kannan, Md. N. Islam, D. Rathod, M. Vijay and U. K. Kharul, et al.
591-595	Electrochemical reduction of O₂ and NO on Ni, Pt and Au	K. K. Hansen
597-603	Electrochemical homolytic and heterolytic coupling of activated olefins in the absence and presence of benzyl bromide in microemulsion	R. Sripriya, M. Chandrasekaran and M. Noel
605-612	Influence of cathodic overpotential on grain size in nanocrystalline nickel deposition on rotating cylinder electrodes	E. Moti’, M. H. Shariat and M. E. Bahrololoom
613-617	Comparative study of the preparation and electrochemical performance of LiNi₁_/2Mn_1/2O₂ electrode material for rechargeable lithium batteries	F. Lian, P. Axmann, C. Stinner, Q. G. Liu and M. Wohlfahrt-Mehrens
619-625	Structure, mechanical and corrosion properties of DC reactive magnetron sputtered aluminum nitride (AlN) hard coatings on mild steel substrates	B. Subramanian, K. Ashok and M. Jayachandran
627-635	Corrosion of brass in natural and artificial seawater under anaerobic conditions	M. C. Bastos, M. H. Mendonça, M. M. M. Neto, M. M. G. S. Rocha and L. Proença, et al.
637-644	A membrane free electrochemical cell using porous flow-through graphite felt electrodes	Chul Bae, Harun Chakrabarti and Edward Roberts
645-651	Effective design of a precision removal process of ITO thin-films	P. S. Pa
653-662	Effect of W on PtSn/C catalysts for ethanol electrooxidation	J. Ribeiro, D. M. dos Anjos, J. -M. Léger, F. Hahn and P. Olivi, et al.
663-668	Polarisation behaviour of Al–Zn–Ga alloy in chloride medium	D. O. Flamini and S. B. Saidman
669-677	Structure and properties of electrodeposited Ni–Co–YZA composite coatings	Meenu Srivastava, V. K. William Grips and K. S. Rajam
679-687	Influence of surface roughness on the semiconducting properties of oxide films formed on 304 stainless steel	N. E. Hakiki
689-694	Effects of saccharin on the electrodeposition of Ni–Co nanocrystalline coatings	Sh. Hassani, K. Raeissi and M. A. Golozar
695-701	Activity of a novel titanium-supported bimetallic PtSn/Ti electrode for electrocatalytic oxidation of formic acid and methanol	Qingfeng Yi, Jingjing Zhang, Aicheng Chen, Xiaoping Liu and Guorong Xu, et al.
703-712	Photoelectrocatalytic activity of mesoporous TiO₂ films prepared using the sol–gel method with tri-block copolymer as structure directing agent	W. Y. Gan, M. W. Lee, R. Amal, H. Zhao and K. Chiang
713-719	Electrodeposition of cobalt based ferro-magnetic metal nanowires in polycarbonate films with cylindrical nanochannels fabricated by heavy-ion-track etching	T. Ohgai, K. Hjort, R. Spohr and R. Neumann
721-727	Electrocombustion of humic acid and removal of algae from aqueous solutions	Andrea A. Liao, Marcos Spitzer, Artur J. Motheo and Rodnei Bertazzoli
729	O. Tabata and T. Tsuchiya (eds.): Reliability of MEMS: Testing of Materials and Devices

Volume 38, Number 6 / June 2008

731-742	Advances in electrochemical Fe(VI) synthesis and analysis	Xingwen Yu and Stuart Licht
743-749	Oxidation of some aliphatic polyols on anodically deposited MnO₂	Debasmita Das, Purabi Rani Samaddar, Pratik Kumar Sen and Kaushik Das
751-758	Electrochemical behaviour of a new triiron-substituted polyoxomolybdate	Graziella Liana Turdean, Adrian Patrut, Leontin David and Ionel Catalin Popescu
759-766	Thin-film composite nanofiltration membranes prepared by electropolymerization	Robert Gloukhovski, Yoram Oren, Charles Linder and Viatcheslav Freger
767-775	Morphological and electrochemical investigation of RuO₂–Ta₂O₅ oxide films prepared by the Pechini–Adams method	Josimar Ribeiro, Michael S. Moats and Adalgisa R. De Andrade
777-783	Candidate membranes for the electrochemical salt-splitting of Sodium Sulfate	Samuel M. Davis, Gary E. Gray and Paul A. Kohl
785-791	A potential method for electrochemical micromachining of titanium alloy Ti6Al4V	L. M. Jiang, W. Li, A. Attia, Z. Y. Cheng and J. Tang, et al.
793-802	Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells	J. Lobato, P. Cañizares, M. A. Rodrigo, C. Ruiz-López and J. J. Linares
803-808	Formation of autonomous ion sensors based on ion insertion-type materials	F. Sauvage, J.-M. Tarascon and E. Baudrin
809-815	Experimental and theoretical study of the effect of some heterocyclic compounds on the corrosion of low carbon steel in 3.5% NaCl medium	M. Şahin, G. Gece, F. Karcı and S. Bilgiç
817-825	Controlled stripping of aluminide coatings on nickel superalloys through electrolytic techniques	B. Bouchaud, J. Creus, C. Rébéré, J. Balmain and F. Pedraza
827-832	Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes	Paulo Henrique Campos Prado Tavares and Paulo Jorge Sanches Barbeira
833-836	Electrochemical determination of estradiol using a poly(l
837-843	Electrocatalytic oxidation of ethanol on Sn₍₁₋
845-851	Iodide mediated electrolysis of acidic coke/coal suspension	A. Demoz, C. Khulbe, C. Fairbridge and S. Petrovic
853-859	Galvanic corrosion of titanium-based dental implant materials	Halit Arslan, Hüseyin Çelikkan, Nisa Örnek, Oğuz Ozan and A. Ersan Ersoy, et al.
861-867	Synthesis, characterization and catalytic properties of palladium-containing poly(allylbenzene p-sulphonic acid) films	A. M. Fundo, F. L. S. Purgato, J. R. Romero and L. M. Abrantes
869-874	Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction	Ahmad Nozad Golikand, Elaheh Lohrasbi, Mohammad Ghannadi Maragheh and Mehdi Asgari
875-879	Nickel phthalocyanine-tetrasulfonic acid as a promoter of methanol electro-oxidation on Pt/C catalyst	Wentao Ma, Jingjie Wu, Chunhui Shen, Haolin Tang and Mu Pan

Volume 38, Number 7 / July 2008

881	Editorial	A. A. Wragg
883	Foreword	Sandra Rondinini
885-891	Thermodynamic and kinetic aspects of the electron transfer reaction of bovine cytochrome c immobilized on 4-mercaptopyridine and 11-mercapto-1-undecanoic acid films	Stefano Monari, Gianantonio Battistuzzi, Marco Borsari, Diego Millo and Cees Gooijer, et al.
893-896	Direct evidence of oxygen evolution from Li₁₊
897-906	SFG and DFG investigation of Au(111), Au(210), polycrystalline Au, Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing KCN and 4-cyanopyridine	Benedetto Bozzini, Bertrand Busson, Claudio Mele and Abderrahmane Tadjeddine
907-913	Electrochemical performance of mechanically treated SnO₂ powders for OER in acid solution	S. Palmas, A. M. Polcaro, F. Ferrara, J. Rodriguez Ruiz and F. Delogu, et al.
915-922	Combined direct and indirect electroxidation of urea containing water	Carlos Carlesi Jara, Simona Di Giulio, Debora Fino and Paolo Spinelli
923-929	Anodic oxidation of mecoprop herbicide at lead dioxide	Marco Panizza, Ignasi Sirés and Glacomo Cerisola
931-938	Effect of functionalized silica particles on cross-linked poly(vinyl alcohol) proton conducting membranes	M. A. Navarra, A. Fernicola, S. Panero, A. Martinelli and A. Matic
939-945	Influence of electrode thickness on the performance of composite electrodes for SOFC	Antonio Barbucci, Mariapaola Carpanese, Andrea P. Reverberi, Giacomo Cerisola and Mireia Blanes, et al.
947-954	Anodic, cathodic and combined treatments for the electrochemical oxidation of an effluent from the flame retardant industry	Daniele Montanaro, Elisabetta Petrucci and Carlo Merli
955-963	SOFC-MGT hybrid power plants fuelled by methanol and DME	Daniele Cocco and Vittorio Tola
965-971	Cavity microelectrodes for the voltammetric investigation of electrocatalysts: the electroreduction of volatile organic halides on micro-sized silver powders	Alberto Vertova, Rachid Barhdadi, Christine Cachet-Vivier, Cristina Locatelli and Alessandro Minguzzi, et al.
973-978	New electrocatalytic materials based on mixed metal oxides: electrochemical quartz crystal microbalance characterization	A. Vertova, L. Borgese, G. Cappelletti, C. Locatelli and A. Minguzzi, et al.
979-984	Product and by-product formation in electrolysis of dilute chloride solutions	A. M. Polcaro, A. Vacca, M. Mascia and F. Ferrara
985-992	Development of gel-polymer electrolytes and nano-structured electrodes for Li-ion polymer batteries	C. Gerbaldi, J. Nair, C. Bonatto Minella, G. Meligrana and G. Mulas, et al.
993-996	Aprotic ionic liquids as electrolyte components in protonic membranes	Alessandra Fernicola, Maria Assunta Navarra and Stefania Panero
997-1003	Electrogeneration of hydrogen peroxide in seawater and application to disinfection	Anna Da Pozzo, Elisabetta Petrucci and Carlo Merli
1005-1010	FEM model of the ohmic resistance of IP-SOFCs	Laura Repetto and Paola Costamagna
1011-1018	Simulation of mass transport in SOFC composite electrodes	Marco Cannarozzo, Adriana Del Borghi and Paola Costamagna
1019-1027	Mesoporous carbons as low temperature fuel cell platinum catalyst supports	Elisa Paola Ambrosio, Carlotta Francia, Claudio Gerbaldi, Nerino Penazzi and Paolo Spinelli, et al.
1029-1033	Mechanistic aspects of oxalic acid oxidation by photocatalysis and ozonation	G. Marcì, E. García-López and L. Palmisano
1035-1041	Electrokinetic remediation of soils contaminated with heavy metals	L. Rutigliano, D. Fino, G. Saracco, V. Specchia and P. Spinelli
1043-1051	Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results	Laura Gabrieli, Cristina Jommi, Guido Musso and Enrique Romero
1053-1060	Electroless deposited Ni–P alloys: corrosion resistance mechanism	Bernhard Elsener, Maura Crobu, Mariano Andrea Scorciapino and Antonella Rossi

Volume 38, Number 8 / August 2008

1061	Editorial	A. A. Wragg
1063	Foreword	Christos Comninellis, Demetrios Tsiplakides and Constantinos G. Vayenas
1065-1073	Computer simulation of the effective double layer occurring on a catalyst surface under electro-chemical promotion conditions	E. P. M. Leiva, C. Vázquez, M. I. Rojas and M. M. Mariscal
1075-1082	The phenomenon of “permanent” electrochemical promotion of catalysis (P-EPOC)	Cyril Falgairette, Arnaud Jaccoud, György Fóti and Christos Comninellis
1083-1088	Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion	Reda Karoum, Antonio de Lucas-Consuegra, Fernando Dorado, Jose Luis Valverde and Alain Billard, et al.
1089-1096	Amperometric/potentiometric hydrocarbon sensors: real world solutions for use in ultra high vacuum	Georgios Kyriakou, Amy V. Stevens, David J. Davis, Robert B. Grant and Mintcho S. Tikhov, et al.
1097-1110	Temperature programmed desorption of oxygen from Pd films interfaced with Y₂O₃-doped ZrO₂	A. Katsaounis
1111-1119	Electrochemical promotion of deep oxidation of methane on Pd/YSZ	V. Roche, R. Karoum, A. Billard, R. Revel and P. Vernoux
1121-1126	Comparative studies between classic and wireless electrochemical promotion of a Pt catalyst for ethylene oxidation	Danai Poulidi and Ian S. Metcalfe
1127-1133	Electrochemical promotion of CO₂ hydrogenation on Rh/YSZ electrodes	S. Bebelis, H. Karasali and C. G. Vayenas
1135-1142	NO reduction performance of Rh paste catalyst on YSZ under steady state and forced oscillation electropromotion conditions	S. Brosda and C. G. Vayenas
1143-1149	ΝΗ₃ decomposition in a proton conducting solid electrolyte cell	S. Zisekas, G. Karagiannakis, C. Kokkofitis and M. Stoukides
1151-1157	Electrochemical promotion of Pt impregnated catalyst for the treatment of automotive exhaust emissions	Antonio de Lucas-Consuegra, Fernando Dorado, Carmen Jiménez-Borja and José Luís Valverde
1159-1170	Electrochemical promotion of NO reduction by C₂H₄ in 10% O₂ using a monolithic electropromoted reactor with Rh/YSZ/Pt elements	S. Souentie, A. Hammad, S. Brosda, G. Foti and C. G. Vayenas
1171-1176	Tailor-structured skeletal Pt catalysts employed in a monolithic electropromoted reactor	A. Hammad, S. Souentie, S. Balomenou, D. Tsiplakides and J. C. Figueroa, et al.

Volume 38, Number 9 / September 2008

1177-1194	Chlor-alkali electrolysis with oxygen depolarized cathodes: history, present status and future prospects	Imad Moussallem, Jakob Jörissen, Ulrich Kunz, Stefan Pinnow and Thomas Turek
1195-1201	Durability of carbon-supported manganese oxide nanoparticles for the oxygen reduction reaction (ORR) in alkaline medium	I. Roche, E. Chaînet, M. Chatenet and J. Vondrák
1203-1210	Voltammetric and morphological characterization of zinc electrodeposition from acid electrolytes containing boric–polyalcohol complexes	E. M. de Oliveira and I. A. Carlos
1211-1216	Production of nickel powder by the titanium redox method and its application to conductive materials	Shinji Inazawa, Masatoshi Majima, Keiji Koyama, Yoshie Tani and Hideaki Toshioka, et al.
1217-1222	A disposable sensor based on immobilization of acetylcholinesterase to multiwall carbon nanotube modified screen-printed electrode for determination of carbaryl	Jie Cai and Dan Du
1223-1227	Electrochemical determination of Pb²⁺ using a carbon nanotube/Nafion composite film-modified electrode	Dong Sun and Zhongmin Sun
1229-1232	Fabrication of Ti–Al–Zr alloy oxide nanotube arrays in organic electrolytes by anodization	Rongqing Xu, Jianling Zhao, Jinliang Tao, Xixin Wang and Yangxian Li
1233-1239	Electrodeposition of nickel oxide nanoparticles on glassy carbon surfaces: application to the direct electron transfer of tyrosinase	Abdolmajid Bayandori Moghaddam, Mohammad Reza Ganjali, Ali Akbar Saboury, Ali Akbar Moosavi-Movahedi and Parviz Norouzi
1241-1252	The effect of convection in the external diffusion layer on the results of a mathematical model of multiple ion transport across an ion-selective membrane	V. Fíla and K. Bouzek
1253-1258	Novel calixarene derivatives as inhibitors of mild C-38 steel corrosion in 1 M HCl	M. Kaddouri, N. Cheriaa, R. Souane, M. Bouklah and A. Aouniti, et al.
1259-1267	Effect of leakage currents on the secondary current distribution in bipolar electrochemical reactors	E. R. Henquín and J. M. Bisang
1269-1274	Development of an amperometric sensor for simultaneous determination of uric acid and ascorbic acid using 2-[bis(2-aminoethyl)amino]ethanol, 4,4′-bipyridine bridged dicopper(II) complex	Ming Yan Wang, Xing You Xu, Fan Yang, Sheng Yu Zhang and Xu Jie Yang
1275-1283	Stability of the electrodeposition process for CoPt alloy formation	O. Berkh, Y. Shacham-Diamand and E. Gileadi
1285-1292	Voltammetric study of polyviologen and the application of polyviologen-modified glassy carbon electrode in amperometric detection of vitamin C	P.-F. Hsu, W.-L. Ciou and P.-Y. Chen
1293-1299	Electrochemical study of cerium(IV) in the presence of ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetate (DTPA) ligands	P. Modiba and A. M. Crouch
1301-1311	Evaluation of some bipyridinium dihalides as inhibitors for low carbon steel corrosion in sulfuric acid solution	M. S. Morad, A. A. Hermas, A. Y. Obaid and A. H. Qusti
1313-1319	Power from marine sediment fuel cells: the influence of anode material	K. Scott, I. Cotlarciuc, D. Hall, J. B. Lakeman and D. Browning
1321-1328	Studies of some operating parameters and cyclic voltammetry for a direct ethanol fuel cell	H. Pramanik, A. A. Wragg and S. Basu

Volume 38, Number 10 / October 2008

1329-1337	Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC)	Chun-Chen Yang, Ying-Jeng Lee, Shwu-Jer Chiu, Kuo-Tong Lee and Wen-Chen Chien, et al.
1339-1345	Reactivity imaging of a passive ferritic FeAlCr steel	Kirsten Agnes Lill, Koji Fushimi, Masahiro Seo and Achim Walter Hassel
1347-1356	Investigation of dissolution inhibitors for electrochemical mechanical planarization of copper using beta-alanine as a complexing agent	B. K. Klug, C. M. Pettit, S. Pandija, S. V. Babu and D. Roy
1357-1362	Effect of mixed support of carbon black and nanographite on the activity of Pt catalyst for ethanol oxidation	Yuanyuan Chu, Zhaohui Teng, Bing Wu, Yawen Tang and Tianhong Lu, et al.
1363-1368	Application of electrochemical noise to evaluate outdoor atmospheric corrosion of copper after relatively short exposure periods	E. García-Ochoa, J. González-Sánchez, F. Corvo, Z. Usagawa and L. Dzib-Pérez, et al.
1369-1374	Open circuit potential shifts of activated carbon in aqueous solutions during chemical and adsorption interactions	Mikhail M. Goldin, Vladimir A. Kolesnikov, Mogely Sh. Khubutiya, Alexander G. Volkov and Gary J. Blanchard, et al.
1375-1383	Incorporation of zirconia nanoparticles into coatings formed on aluminium by AC plasma electrolytic oxidation	E. Matykina, R. Arrabal, P. Skeldon and G. E. Thompson
1385-1390	Effects of Co₃(PO₄)₂ coatings on LiNi_0.8Co_0.16Al_0.04O₂ cathodes during application of high current	Kwang Sun Ryu, Sang Hyo Lee, Bon Keup Koo, Ju Wook Lee and Kwang Man Kim, et al.
1391-1399	Inhibiting properties and adsorption of some thioamides on mild steel in sulphuric acid solutions	E. Lazarova, G. Petkova, T. Iankova, L. Ivan and G. Neikov
1401-1407	Mechanistic investigation into the electrolytic formation of iron from iron(III) oxide in molten sodium hydroxide	A. Cox and Derek J. Fray
1409-1413	Influence of pitch-based carbon foam current collectors on the electrochemical properties of lead acid battery negative electrodes	Ya Chen, Bai-Zhen Chen, Li-Wen Ma and Yan Yuan
1415-1419	Pd–Ru/C as the electrocatalyst for hydrogen peroxide reduction	Limei Sun, Dianxue Cao and Guiling Wang
1421-1426	Tunable electrochemical properties of liquid phase deposited TiO₂ films	Jingdong Zhang and Munetaka Oyama
1427-1433	Stable, colourless and water-soluble electron-transfer mediators used in enzyme electrochemistry	K. Vuorilehto
1435-1443	Deposition of Zn–Cr alloy coatings from sulfate electrolyte: effect of polypropylene glycol 620 and glycine and combinations thereof	Tz. Boiadjieva, D. Kovacheva, L. Lyutov and M. Monev
1445-1451	Non-platinum electrocatalysts: Manganese oxide nanoparticle-cobaltporphyrin binary catalysts for oxygen reduction	Mohamed S. El-Deab, Sameh H. Othman, Takeyoshi Okajima and Takeo Ohsaka
1453-1457	Synthesis and electrochemical properties of monoclinic Li₃V₂(PO₄)₃/C composite cathode material prepared from a sucrose-containing precursor	A. P. Tang, X. Y. Wang, S. Y. Yang and J. Q. Cao
1459-1466	Electrochemical formation and characterization of porous titania (TiO₂) films on Ti	Sahar A. Fadl-Allah, Rabab M. El-Sherief and Waheed A. Badawy
1467-1476	Feasibility of determining corrosion rates by means of stray current-induced polarisation	C. Andrade, I. Martínez and M. Castellote
1477-1481	High-rate, high capacity ZrO₂ coated Li[Li_1/6Mn_1/2Co_1/6Ni_1/6]O₂ for lithium secondary batteries	Gu-Yeon Kim, Yong Joon Park, Kwang Hee Jung, Dae-Jin Yang and Ju Wook Lee, et al.
1483	A. Zuttel, A. Borgschulte, L. Schlapbach (eds.): Hydrogen as a Future Energy Carrier

Volume 38, Number 11 / November 2008

1485-1494	Electrochemical impedance spectroscopy investigation of spinel type cobalt oxide thin film electrodes in alkaline medium	E. Laouini, M. Hamdani, M. I. S. Pereira, J. Douch and M. H. Mendonça, et al.
1495-1500	Improved shape evolution of copper interconnects prepared by jet-stream etching	Tsung-Kuang Yeh, Ming-Han Tsai, Mei-Ya Wang and Chen-Kuo Weng
1501-1508	SERS and EQCM studies on the effect of allyl thiourea on copper dissolution and deposition in aqueous sulfuric acid	Guo-Liang Chen, Heng Lin, Jiang-Hong Lu, Li Wen and Jian-Zhang Zhou, et al.
1509-1518	Corrosion inhibition of mild steel in sulfamic acid solution by S-containing amino acids	M. S. Morad
1519-1526	Electrochemical gold deposition from sulfite solution: application for subsequent polyaniline layer formation	Gintaras Baltrūnas, Aušra Valiūnienė, Justas Vienožinskis, Ernestas Gaidamauskas and Teofilis Jankauskas, et al.
1527-1533	Electrochemical determination diethylstilbestrol by a single-walled carbon nanotube/platinum nanoparticle composite film electrode	Junjie Fei, Xiaoqin Wen, Lanhua Yi, Fang Ge and Ying Zhang, et al.
1535-1543	Platinization of Ti for the fabrication of a Sn-modified Pt/Ti electrode for reduction of nitrate	Kwang-Wook Kim, Seong-Min Kim, Yeon-Hwa Kim, Eil-Hee Lee and Dong-Woo Shin, et al.
1545-1552	Analysis of raw and trend removed EN data in time domain to evaluate corrosion inhibition effects of New Fuchsin dye on steel corrosion and comparison of results with EIS	H. Ashassi-Sorkhabi and D. Seifzadeh
1553-1559	Electrochemical and theoretical studies of thienyl-substituted amino triazoles on corrosion inhibition of copper in 0.5 M H₂SO₄	Yong-Ming Tang, Yun Chen, Wen-Zhong Yang, Ying Liu and Xiao-Shuang Yin, et al.
1561-1569	Electrodeposition of Cu from acidic sulphate solutions containing cetyltrimethylammonium bromide (CTAB)	Benedetto Bozzini, Lucia D’Urzo, Marilena Re and Federica De Riccardis
1571-1575	The electrochemical behaviour of an exfoliated graphite electrode in simulated seawater containing oil	Xiaoyan Cao, Guipeng Yang, Shuwei Wei and Chunling Li
1577-1582	Time averaged concentration calculations in pulse electrochemical machining	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
1583-1588	PEDOT/Palladium composite material: synthesis, characterization and application to simultaneous determination of dopamine and uric acid	S. Harish, J. Mathiyarasu, K. L. N. Phani and V. Yegnaraman
1589-1598	Role of alloyed silicon and some inorganic inhibitors in the inhibition of meta-stable and stable pitting of Al in perchlorate solutions	Mohammed A. Amin, Hamdy H. Hassan, Omar A. Hazzazi and Mohsen M. Qhatani
1599-1607	Impedance spectroscopy studies of the dissolution of ferrous- and zinc-based materials in aqueous timber preservatives	Gareth Kear, Hăi-Zhèn Wú, Mark S. Jones and Frank C. Walsh
1609-1621	Computational and electrochemical investigation for corrosion inhibition of nickel in molar nitric acid by piperidines	K. F. Khaled and Mohammed A. Amin
1623-1627	Determination of cadmium (II) using H₂O₂-oxidized activated carbon modified electrode	Hongchao Yi and Ping Mei
1629-1636	Synergism in copper corrosion inhibition by sodium dodecylbenzenesulphonate and 2-mercaptobenzoimidazole	M. G. Hosseini, H. Tavakoli and T. Shahrabi

Volume 38, Number 12 / December 2008

1637-1646	Degradation of oxygen-depolarized Ag-based gas diffusion electrodes for chlor-alkali cells	S. Siracusano, T. Denaro, V. Antonucci, A. S. Aricò and C. Urgeghe, et al.
1647-1652	Effects of substituents of imidazolium cations on the performance of dye-sensitized TiO₂ solar cells	Kyung Mo Son, Man Gu Kang, R. Vittal, Jiwon Lee and Kang-Jin Kim
1653-1657	Surface roughness of thin silver films pulse-plated using silver cyanide-thiocyanate electrolyte	S. M. Asadul Hossain and M. Saitou
1659-1664	A novel nanocomposite of Pd nanocluster/poly(
1665-1670	Ethanol electrooxidation on platinum particles dispersed on poly(neutral red) film	Xinxian Zhong, Jinhua Chen and Xiaohua Zhang
1671-1676	Synthesis, characterization and electrochemical performance of LiNiVO₄ anode material for lithium-ion batteries	Xiaoyan Han, Wenchao Tang, Zonghui Yi and Jutang Sun
1677-1681	Manganese oxide precipitated into activated carbon electrodes for electrochemical capacitors	Chuen-Chang Lin and Chia-Cheng Yen
1683-1690	Electrochemical determination of plant-derived leuco-indigo after chemical reduction by glucose	Anne Vuorema, Philip John, Marjo Keskitalo and Frank Marken
1691-1694	Synthesis and properties of novel organic thiolane polymer as cathode material for rechargeable lithium batteries	Li Zhi Zhan, Zhi Ping Song, Jing Yu Zhang, Jing Tang and Hui Zhan, et al.
1695-1705	Influence of plating parameters and solution chemistry on the voiding propensity at electroplated copper–solder interface
1707-1714	Electrodeposition of NiCu-matrix nanocomposites using a rotating cylinder Hull cell	A. Lozano-Morales and E. J. Podlaha
1715-1720	Pulse anodic stripping voltammetric determination of copper with an amoxicillin–nafion modified glassy carbon electrode	A. A. Ramadan, H. Mandil and M. A. Saleh
1721-1726	Pulse-mode electrochemical reduction of carbon dioxide using copper and copper oxide electrodes for selective ethylene formation	J. Yano and S. Yamasaki
1727-1734	Control of composition and size for Pd–Ni alloy nanowires electrodeposited on highly oriented pyrolytic graphite	Weiwei Si, Gang Yu, Yuejun Ouyang, Lili Tang and Xiaomei He, et al.
1735-1741	Adenosine 5′-triphosphate incorporated poly(3,4-ethylenedioxythiophene) modified electrode: a bioactive platform with electroactivity, stability and biocompatibility	Y. H. Xiao, C. M. Li, M.-L. Toh and R. Xue
1743-1747	Electrochemical study of catechols in the presence of 2-thiazoline-2-thiol: application to electrochemical synthesis of new 4,5-dihydro-1,3-thiazol-2-ylsulfanyl-1,2-benzenediol derivatives	A. R. Fakhari, S. S. Hosseiny Davarani, H. Ahmar and S. Makarem
1749-1755	Enhanced degradation of aqueous methyl orange by contact glow discharge electrolysis using Fe²⁺ as catalyst	Jianying Gong, Juan Wang, Weijie Xie and Weimin Cai
1757-1761	Electropolymerization of benzotriazole in room temperature ionic liquid [bmim]PF₆	Z. Zhou, D. L. He, R. H. Yang, Y. N. Guo and J. F. Zhong, et al.
1763-1769	Response surface analysis to evaluate the influence of deposition parameters on the electrodeposition of Cu–Co alloys in citrate medium	F. L. G. Silva, J. R. Garcia, V. G. M. Cruz, A. S. Luna and D. C. B. Lago, et al.
1771-1778	Influence of constant magnetic field on the electrodeposition of Co–Mo–W alloys	M. Zieliński and E. Miękoś
1779-1783	Determination of catechol based on an oscillating chemical reaction involving a macrocyclic complex as catalyst	Panpan Chen, Gang Hu, Wei Wang, Jimei Song and Lingguang Qiu, et al.

Volume 39, Number 1 / January 2009

1-5	MnO₂ cathode in an aqueous Li₂SO₄ solution for battery applications	Manickam Minakshi and David R. G. Mitchell
7-14	Direct electrochemistry of chemically modified catalase immobilized on an oxidatively activated glassy carbon electrode	Sedigheh Hashemnia, Hedayatollah Ghourchian, Ali Aakbar Moosavi-Movahedi and Hassan Faridnouri
15-22	Role of alkaline nitrites in the corrosion performance of steel in composite cements	Ha-won Song, V. Saraswathy, S. Muralidharan, Chang-Hong Lee and K. Thangavel
23-30	Studies on promising cell performance with H₂SO₄ as the catholyte for electrogeneration of Ag²⁺ from Ag⁺ in HNO₃ anolyte in mediated electrochemical oxidation process	K. Chandrasekara Pillai, M. Matheswaran, Sang Joon Chung and Il-Shik Moon
31-38	Influence of the particle size on the mechanical and electrochemical behaviour of micro- and nano-nickel matrix composite coatings	C. Zanella, M. Lekka and P. L. Bonora
39-44	Synthesis and characterization of nano-sized calcium zincate powder and its application to Ni–Zn batteries	Chen-Chen Yang, Wen-Chen Chien, Po-Wei Chen and Cheng-Yeou Wu
45-53	Methanol tolerant oxygen-reduction activity of carbon supported platinum–bismuth bimetallic nanoparticles	C. Jeyabharathi, J. Mathiyarasu and K. L. N. Phani
55-64	Nickel-dimethylglyoxime complex modified graphite and carbon paste electrodes: preparation and catalytic activity towards methanol/ethanol oxidation	William S. Cardoso, Vera L. N. Dias, Wendell M. Costa, Isaide de Araujo Rodrigues and Edmar P. Marques, et al.
65-70	Carbon nanotube-modified glassy carbon electrode for anodic stripping voltammetric detection of Uranyle	Ahmad Nozad Golikand, Mehdi Asgari, Mohammad Ghannadi Maragheh and Elaheh Lohrasbi
71-81	Effects of electrolyte parameters on the iron/steel cathode potential in the chlorate process	Linda Nylén and Ann Cornell
83-91	Inhibition of corrosion processes on copper in aerated sodium chloride solutions by 5-(3-aminophenyl)-tetrazole	El-Sayed M. Sherif, R. M. Erasmus and J. D. Comins
93-100	Polypyrrole electropolymerized on aluminum alloy 1100 doped with oxalate and tungstate anions	Kátia R. L. Castagno, Denise S. Azambuja and Viviane Dalmoro
101-106	Simulation of energy consumption in electrochemical grinding of hard-to-machine materials	Mariusz Łupak and Stanisław Zaborski
107-116	Wet film application techniques and their effects on the stability of RuO₂–TiO₂ coated titanium anodes	Prachi Shrivastava and Michael S. Moats
117-121	Pt film electrodes prepared by the Pechini method for electrochemical decolourisation of Reactive Orange 16	L. Gomes, R. G. Freitas, G. R. P. Malpass, E. C. Pereira and A. J. Motheo
123-134	Preparation of Pt–Co alloy catalysts by electrodeposition for oxygen reduction in PEMFC	Yupa Saejeng and Nisit Tantavichet
135-140	Effect of the preparation conditions of carbon-supported Pt catalyst on PEMFC performance	Ji Bong Joo, Pil Kim, Wooyoung Kim, Younghun Kim and Jongheop Yi
141-146	Uniform coating of a crystalline TiO₂ film onto steel plates by electrochemical deposition using staged pulse current	Naoki Suzuki, Subbian Karuppuchamy and Seishiro Ito
147-154	Synthesis of pyridine derivatives and their influence as additives on the photocurrent of dye-sensitized solar cells	Xiong Yin, Weiwei Tan, Jingbo Zhang, Yuan Lin and Xurui Xiao, et al.

Volume 39, Number 2 / February 2009

155-158	EIS study of the influence of BrCl on the behavior of electrodes in Li/SOCl₂ cells	Hong-Hua Ge, Yong-Sheng Guo, Rui-Feng Guo, Yi-Ping Wu and Guo-Ding Zhou
159-166	Development of MnO₂-incorporated high performance aluminum alloy matrix sacrificial anodes	S. M. A. Shibli and K. K. Binoj
167-176	Properties and mechanism of solar absorber CdTe thin film synthesis by unipolar galvanic pulsed electrodeposition	A. C. Rastogi and R. K. Sharma
177-184	Oxygen reduction on Cu–Zn alloys	R. Procaccini, S. Ceré and M. Vázquez
185-189	Indirect electrochemical synthesis of active oxygen in dilute sulfate solutions	Mark M. Goldin, Mogely Sh. Khubutiya, Vladimir A. Kolesnikov, Michail M. Abakumov and Anatoly K. Evseev, et al.
191-196	Preparation and evaluation of RuO₂–IrO₂, IrO₂–Pt and IrO₂–Ta₂O₅ catalysts for the oxygen evolution reaction in an SPE electrolyzer	A. Di Blasi, C. D’Urso, V. Baglio, V. Antonucci and A. S. Arico’, et al.
197-204	Carbon-supported manganese oxide nanoparticles as electrocatalysts for oxygen reduction reaction (orr) in neutral solution	I. Roche and K. Scott
205-211	Derivation of the explicit equation relating mass-transport-limited-current to voltage at the interface between two immiscible electrolyte solutions (ITIES)	R. A. H. Edwards, M. Vignali and V. J. Cunnane
213-225	A method for rough estimation of the catalyst surface area in a fuel cell	Tanja Vidaković, Mihai Christov and Kai Sundmacher
227-232	Electro-reduction of carbon dioxide to formate on lead electrode in aqueous medium	B. Innocent, D. Liaigre, D. Pasquier, F. Ropital and J.-M. Léger, et al.
233-240	Modulation of magnetic and structural properties of cobalt thin films by means of electrodeposition	Jose García-Torres, Elvira Gómez and Elisa Vallés
241-245	Electrochemical properties of amorphous Li
247-251	Preparation and electrochemical performance of gel polymer electrolytes with a novel star network	Qizhen Xiao, Zhaohui Li, Deshu Gao, Tao He and Hailiang Zhang
253-260	Synthesis of functionalized copolymer electrolytes based on polysiloxane and analysis of their conductivity	Fu-Ming Wang, Chi-Chao Wan and Yung-Yun Wang
261-267	Effects of 1-butyl-3-methylimidazolium hydrogen sulfate-[BMIM]HSO₄ on zinc electrodeposition from acidic sulfate electrolyte	Qibo Zhang and Yixin Hua
269-276	Inhibition of mild steel corrosion in groundwater by pyrrole and thienylcarbonyl benzotriazoles	D. Gopi, K. M. Govindaraju, V. Collins Arun Prakash, V. Manivannan and L. Kavitha
277-282	Temperature dependence of the electrochemical corrosion characteristics of carbon steel in a salty soil	X. H. Nie, X. G. Li, C. W. Du and Y. F. Cheng
283-291	Effects of SiC and Al₂O₃ particles on the electrodeposition of Zn, Co and ZnCo. I. Electrodeposition in the absence of SiC and Al₂O₃	Paulo C. Tulio and Ivani A. Carlos
293-301	High temperature water electrolysis using metal supported solid oxide electrolyser cells (SOEC)	G. Schiller, A. Ansar, M. Lang and O. Patz
303-309	EIS investigation of the deposition of trivalent chromium coatings on Al 6063 alloy	Hui Cheng Yu, Bai Zhen Chen, Xi Chang Shi, Hai Ying Wu and Bin Li
311-312	D. A. J. Rand and R. M. Dell, Hydrogen Energy: Challenge and Prospects

Volume 39, Number 3 / March 2009

313-320	Agarose-based hydrogel as an electrografting cell	Brigitte Mouanda, Veronique Eyeffa and Serge Palacin
321-327	Electrocatalytic reduction of hydrogen peroxide at nanostructured copper modified electrode	Thangavelu Selvaraju and Ramasamy Ramaraj
329-337	Electrooxidation and inhibition of the antibacterial activity of oxytetracycline hydrochloride using a RuO₂ electrode	A. Rossi, V. A. Alves, L. A. Da Silva, M. A. Oliveira and D. O. S. Assis, et al.
339-345	Corrosion behavior of composition modulated multilayer Zn–Co electrodeposits produced using a single-bath technique	V. Thangaraj, N. Eliaz and A. Chitharanjan Hegde
347-360	DMFC electrode preparation, performance and proton conductivity measurements	L. Birry, C. Bock, X. Xue, R. McMillan and B. MacDougall
361-367	Reliability models for electrochemical processes: some applications of the Weibull and Rayleigh probability distributions	Thomas Z. Fahidy
369-375	Voltammetric study of the influence of benzotriazole on copper deposition from a sulphuric plating bath	A. C. M. de Moraes, J. L. P. Siqueira, L. L. Barbosa and I. A. Carlos
377-381	Structure and electrochemical properties of nickel hydroxide electrodes with cobalt additives	Xiaofeng Li, Shumian Li, Jiayong Li and Huichao Dong
383-389	Electrochemical desulfurization of geothermal fluids under high temperature and pressure	B. G. Ateya, F. M. Al Kharafi, A. M. El-Shamy, A. Y. Saad and R. M. Abdalla
391-402	Role of some thiadiazole derivatives as inhibitors for the corrosion of C-steel in 1 M H₂SO₄	A. S. Fouda, F. E. Heakal and M. S. Radwan
403-410	Electrocatalytic oxidation of methanol on Cu modified polyaniline electrode in alkaline medium	K. L. Nagashree and M. F. Ahmed
411-419	Effect of support conductivity of catalytic powder on electrocatalytic hydrogenation of phenol	Dihourahouni Tountian, Anne Brisach-Wittmeyer, Paul Nkeng, Gérard Poillerat and Hugues Ménard
421-427	Electrochemical behavior of vanadium-substituted Keggin-type polyoxometalates in aqueous solution	Chunxiang Li, Yan Zhang, Kevin P. O’Halloran, Jiawei Zhang and Huiyuan Ma
429-438	Evaluation of electrochemical frequency modulation as a new technique for monitoring corrosion and corrosion inhibition of carbon steel in perchloric acid using hydrazine carbodithioic acid derivatives	K. F. Khaled
439-445	Conductivity modification of proton conducting polymer gel electrolytes containing a weak acid (
447-453	Corrosion behavior of TiN and TiN/Ti composite films on Ti6Al4V alloy in Hank’s solution	Bo Tian, Dong Bai Xie and Fu Hui Wang
455-461	Electrochemical study of the codeposition of Mg–Li–Al alloys from LiCl–KCl–MgCl₂–AlCl₃ melts	Yong De Yan, Mi Lin Zhang, Yun Xue, Wei Han and Dian Xue Cao, et al.
463-465	Electrocarboxylation and related radical coupling processes of aryl and benzyl halides in microemulsion	S. Anandhakumar, R. Sripriya, M. Chandrasekaran, S. Govindu and M. Noel

Volume 39, Number 4 / April 2009

467	Editorial	A. A. Wragg
469	Foreword	Antonio Barbucci, Massimo Viviani and Paolo Piccardo
471-475	Proton diffusivity in the BaZr_0.9Y_0.1O_3−δ proton conductor	Artur Braun, Sophie Duval, Peter Ried, Jan Embs and Fanni Juranyi, et al.
477-483	Comparison of the electrochemical properties of intermediate temperature solid oxide fuel cells based on protonic and anionic electrolytes	Daniela La Rosa, Massimiliano Lo Faro, Giuseppe Monforte, Vincenzo Antonucci and Antonino Salvatore Aricò
485-495	Tape casting of proton conducting ceramic material	Rémi Costa, Julien Hafsaoui, Ana Paula Almeida de Oliveira, Arnaud Grosjean and Matthieu Caruel, et al.
497-502	Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports	Paul Gannon, Stephen Sofie, Max Deibert, Richard Smith and Vladimir Gorokhovsky
503-511	Morphology and electrochemical activity of SOFC composite cathodes: II. Mathematical modelling	Cristiano Nicolella, Antonio Bertei, Massimo Viviani and Antonio Barbucci
513-521	Morphology and electrochemical activity of SOFC composite cathodes: I. experimental analysis	Antonio Barbucci, M. Paola Carpanese, Massimo Viviani, Nicolaos Vatistas and Cristiano Nicolella
523-528	Possible proton conduction in Ce_0.9Gd_0.1O_2−δ nanoceramics	Enrique Ruiz-Trejo and John A. Kilner
529-534	Effect of nano-layered ceramic coatings on the electrical conductivity of oxide scale grown on ferritic steels	S. Chevalier, G. Caboche, K. Przybylski and T. Brylewski
535-543	Current status of proton-conducting solid oxide fuel cells development	Florence Lefebvre-Joud, Gilles Gauthier and Julie Mougin
545-551	Interconnect materials for next-generation solid oxide fuel cells	Paolo Piccardo, Roberta Amendola, Sébastien Fontana, Sébastien Chevalier and Gilles Caboches, et al.
553-557	Synthesis and proton incorporation in BaCe_0.9−

Volume 39, Number 5 / May 2009

559-567	RVC as new carbon material for batteries	A. Czerwiński, Z. Rogulski, Sz. Obrębowski, H. Siwek and I. Paleska, et al.
569-576	Effect of sodium molybdate on the corrosion behavior of cold rolled steel in peracetic acid solution	Qing Qu, Lei Li, Shuan Jiang, Wei Bai and Zhongtao Ding
577-582	Electrochemical treatment of pharmaceutical azo dye amaranth from waste water	Rajeev Jain, Nidhi Sharma and Keisham Radhapyari
583-591	Electrochemical behavior of AZ91D magnesium alloy in phosphate medium—part I. Effect of pH	Fakiha El-Taib Heakal, Amany Mohammed Fekry and Mohammed Ziad Fatayerji
593-600	Powdered activated carbon and carbon paste electrodes: comparison of electrochemical behaviour	S. Biniak, M. Pakuła, W. Darlewski, A. Świątkowski and P. Kula
601-607	Electrochemical and structural characterization of cobalt recycled from cathodes of spent Li-ion batteries	M. B. J. G. Freitas, E. M. Garcia and V. G. Celante
609-615	Sub-freezing endurance of PEM fuel cells with different catalyst-coated membranes	Wei Song, Junbo Hou, Hongmei Yu, Lixing Hao and Zhigang Shao, et al.
617-625	Electrochemical properties of Li_1−z(Ni_1−yFe_y)_1+zO₂ synthesized by the combustion method in an air atmosphere	Myoung Youp Song, Ik Hyun Kwon, Jiunn Song and Sungbo Shim
627-636	Simultaneous determination of trace aluminum (III), copper (II) and cadmium (II) in water samples by square-wave adsorptive cathodic stripping voltammetry in the presence of oxine	A. M. Beltagi and M. M. Ghoneim
637-645	Analysis of the dynamics of Intergranular corrosion process of sensitised 304 stainless steel using recurrence plots	E. García-Ochoa, J. González-Sánchez, N. Acuña and J. Euan
647-652	A modified composite film electrode of polyoxometalate/carbon nanotubes and its electrocatalytic reduction	Weihua Guo, Lin Xu, Bingbing Xu, Yanyan Yang and Zhixia Sun, et al.
653-661	Electrochemical polymerization and characterization of a poly(azulene)-TiO₂ nanoparticle composite film	R.-M. Latonen, B. Meana Esteban, C. Kvarnström and A. Ivaska
663-669	Electrochemical polymerisation of phenol in aqueous solution on a Ta/PbO₂ anode	Noureddine Belhadj Tahar, Ridha Abdelhédi and André Savall
671-679	Improved electrochemical properties of Li(Ni_0.7Co_0.3)O₂ cathode for lithium ion batteries with controlled sintering conditions	Dae Geun Lee, Ravindra K. Gupta, Yong Soo Cho and Kwang Taek Hwang
681-687	Ascorbic acid oxidation in SDS micellar systems	M. Szymula and J. Narkiewicz-Michałek
689-696	Understanding the inhibitory effect of sodium oleate on the corrosion of Al and Al–Cu alloys in 1.0 M H₃PO₄ solution—Polarization studies	Mohammed A. Amin
697-704	Effects of cathodic potential on the local electrochemical environment under a disbonded coating	Xu Chen, Cuiwei Du, Xiaogang Li and Yizhong Huang
705-711	Electrochemical reduction of oxygen with iron phthalocyanine in neutral media	Eileen Hao Yu, Shaoan Cheng, Bruce E. Logan and Keith Scott
713-717	Preparation and characterization of nanocrystalline Fe–Ni–Cr alloy electrodeposits on Fe substrate	Lijian Xu, Jingjing Du, Shuxun Ge, Nongyue He and Song Li
719-725	Effects of anodization and electrodeposition conditions on the growth of copper and cobalt nanostructures in aluminum oxide films	Abbas Ghaddar, Jacek Gieraltowski and Frederic Gloaguen
727-736	Comparative electrocatalytic behavior of self-assembled monolayer of thiol derivatised Co (II) phthalocyanines on gold disk, ultramicro cylinder and fiber electrodes	Nolwazi Nombona, Daniela A. Geraldo, Jean Hakuzimana, Anne Schwarz and Philippe Westbroek, et al.
737-745	Effect of alternating voltage passivation on the corrosion resistance of duplex stainless steel	Huan He, Tao Zhang, Chengzhi Zhao, Kai Hou and Guozhe Meng, et al.
747-750	Electrochemical preparation of polyaniline microspheres incorporated with DNA	Jun Yano, Takeaki Kohno and Akira Kitani

Volume 39, Number 6 / June 2009

751-759	Effect of nickel sulphate and magnesium sulphate on pH of sulphuric acid solutions at elevated temperatures	Z. Jankovic, V. G. Papangelakis and S. N. Lvov
761-767	Corrosion behavior of ferritic stainless steel alloyed with different amounts of niobium in hydrochloric acid solution	Hulya Demiroren
769-778	Adsorption and inhibitive corrosion properties of thiourea derivatives on cold rolled steel in 1 M HClO₄ solutions	O. Benali, L. Larabi and Y. Harek
779-784	Synergistic inhibition between the gemini surfactant and bromide ion for steel corrosion in sulphuric acid	Zhen-Yu Wu, Zheng Fang, Ling-Guang Qiu, Yun Wu and Zong-Qun Li, et al.
785-790	Poly(taurine)/MWNT-modified glassy carbon electrodes for the detection of acetaminophen	Qinjin Wan, Xiuwen Wang, Fen Yu, Xiaoxia Wang and Nianjun Yang
791-798	Time averaged temperature calculations in pulse electrochemical machining, spectral approach	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
799-805	Homogeneous electrocatalytic oxidation of d-penicillamine with ferrocyanide at a carbon paste electrode: application to voltammetric determination	J. B. Raoof, R. Ojani, M. Majidian and F. Chekin
807-814	Electrochemical properties of LiNi_1−yM_yO₂ (M=Ni, Ga, Al and/or Ti) cathodes synthesized by the combustion method	Myoung Youp Song, Sung Nam Kwon, Soon-Do Yoon and Daniel R. Mumm
815-825	Water transfer simulation of an electrolytic dehumidifier	Shuichi Sakuma, Shiro Yamauchi and Osamu Takai
827-835	Electrochemical redox reactions of chromium and iron ions in molten NaCl–2CsCl eutectic for pyro-reprocessing of nuclear fuels	A. Uehara, O. Shirai, T. Nagai, T. Fujii and H. Yamana
837-847	Effect of dopants on wetting properties and electrochemical behaviour of graphite anodes in molten Al₂O₃-cryolite melts	Philippe Meunier, Barry Welch, Maria Skyllas-Kazacos and Veena Sahajwalla
849-857	Joint effect of halides and ethanol extract of Lasianthera africana on inhibition of corrosion of mild steel in H₂SO₄	N. O. Eddy, S. A. Odoemelam and A. O. Odiongenyi
859-866	Influence of hot-pressing temperature on physical and electrochemical performance of catalyst coated membranes for direct methanol fuel cells	Peng Liu, Ge-Ping Yin, Er-Dong Wang, Jian Zhang and Zhen-Bo Wang
867-871	Mechanistic studies for the limitation of carbon supercapacitor voltage	Deyang Qu
873-877	CO₂ corrosion of carbon steel in the presence of acetic acid at higher temperatures	Peter C. Okafor, Bruce Brown and Srdjan Nesic
879-885	Electroless plating of Ni–P coatings on carbon steel in a stirred bed of glass balls	Zhaoxia Ping, Yedong He, Changdong Gu and Tong-Yi Zhang
887-897	Electrochemical, SEM and XPS investigations on phosphoric acid treated surgical grade type 316L SS for biomedical applications	K. Prabakaran and S. Rajeswari
899-906	Effect of oxidation on the performance of low-temperature petroleum cokes as anodes in lithium ion batteries	A. Concheso, R. Santamaría, R. Menéndez, J. M. Jiménez-Mateos and R. Alcántara, et al.
907-912	Effect of copper content on the properties of Ni–Cu–P plated polyester fabric	R. H. Guo, S. Q. Jiang, C. W. M. Yuen and M. C. F. Ng
913-920	Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr	Li-Ming Peng, Jian-Wei Chang, Xing-Wu Guo, Andrej Atrens and Wen-Jiang Ding, et al.
921-925	Electrogenerated chemiluminescence of ruthenium (II) bipyridyl complex directly immobilized on glassy carbon electrodes	Minghui Xiang, Rong Lei, Na Li and Kean Li
927-933	Electrochemical reduction of Gd(III) and Nd(III) on reactive cathode material in molten fluoride media	C. Nourry, L. Massot, P. Chamelot and P. Taxil
935-945	Electrochemical detection of the neomycin phosphotransferase gene (NPT-II) in transgenic plants with a novel DNA biosensor	Jian Wang, Qinling Sheng, Na Tian, Liyu Chen and Ziqin Xu, et al.
947-951	Synthesis and characterization of lithium holmium silicate solid electrolyte for high temperature lithium batteries	M. Ganesan
953-954	G. Inzelt: Conducting Polymers

Volume 39, Number 7 / July 2009

955-960	Electrolyte optimization for a Li ion battery by charge profile analysis	Minwhan Cha and Cheolsoo Jung
961-969	A review of the effects of benzotriazole on the corrosion of copper and copper alloys in clean and polluted environments	Nageh K. Allam, Ahmed Abdel Nazeer and Elsayed A. Ashour
971-977	Development of a new biosensor for mediatorless voltammetric determination of hydrogen peroxide and its application in milk samples	Şenol Alpat, Sibel Kılınç Alpat, Zekerya Dursun and Azmi Telefoncu
979-988	A voltammetric approach to an estimate of metal release from tinplate promoted by ligands present in canned vegetables	R. Toniolo, A. Pizzariello, F. Tubaro, S. Susmel and N. Dossi, et al.
989-994	Electrodeposition of silver–tin alloys from pyrophosphate-cyanide electrolytes	A. Hrussanova and I. Krastev
995-1001	Performance of lithium-ion cells with a γ-ray radiated electrolyte	N. Ding, X. Fang, J. Xu, Y. X. Yao and J. Zhu, et al.
1003-1009	Experimental analysis of platinum utilization in a DMFC cathode	Balaji Krishnamurthy and S. Deepalochani
1011-1015	Electrochemical behavior of an inorganic–organic hybrid based on isopolymolybdate anions and ethylenediamine	Chunxiang Li, Yan Zhang, Kevin P. O’Halloran and Huiyuan Ma
1017-1023	Underscale corrosion behavior of carbon steel in a NaCl solution using a new occluded cavity cell for simulation	Yuanliang Zhu, Yubing Qiu and Xingpeng Guo
1025-1031	Ferric-oxalate-gluconate based redox mediated electrochemical system for vat dyeing	K. Firoz Babu, R. Senthil Kumar, M. Anbu Kulandainathan and M. Noel
1033-1038	Morphology-dependent electrochemical supercapacitive characteristics of nanostructured manganese dioxide	Guo-Qing Zhang and Sheng-Tao Zhang
1039-1044	Electrooxidation and dischargeability of transition-metal borides as possible anodic materials in neutral aqueous electrolytes	Y. Wang, X. Y. Guang, Y. L. Cao, X. P. Ai and H. X. Yang
1045-1051	Influence of ethylene glycol, ethanol and formic acid on platinum and ruthenium electrodeposition on carbon support material	Juan Manuel Sieben, Marta M. E. Duarte, Carlos E. Mayer and Julio C. Bazán
1053-1058	Electro-oxidation of methanol on co-deposited Pt-MoO_x prepared by cyclic voltammetry with different scanning potential ranges	Tao Huang, Jihua Zhuang and Aishui Yu
1059-1066	Effects of surface area on electrochemical performance of Li[Ni_0.2Li_0.2Mn_0.6]O₂ cathode material	Jea Hyeok Ryu, Bo Gun Park, Seuk Buom Kim and Yong Joon Park
1067-1073	Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity	Jing-Chie Lin, Chien-Ming Lai, Fu-Ping Ting, San-Der Chyou and Kan-Lin Hsueh
1075-1079	Piperazine derivatives as inhibitors of the corrosion of mild steel in 3.9 M HCl	A. Ousslim, K. Bekkouch, B. Hammouti, A. Elidrissi and A. Aouniti
1081-1086	Spherical natural graphite coated by a thick layer of carbonaceous mesophase for use as an anode material in lithium ion batteries	Chuanyun Wan, Hui Li, Mingchang Wu and Chongjun Zhao
1087-1095	Bmim ionic liquids as media for the electrochemical oxidation of 2,6-di-t-butylphenol	P. Loyson, C. Imrie, S. Gouws, B. Barton and E. Kruger
1097-1103	Design of an “all solid-state” supercapacitor based on phosphoric acid doped polybenzimidazole (PBI) electrolyte	Dhanraj Rathod, Meenu Vijay, Nazrul Islam, Ramaiyan Kannan and Ulhas Kharul, et al.
1105-1110	Improved thermal stability of graphite electrodes in lithium-ion batteries using 4-isopropyl phenyl diphenyl phosphate as an additive	Qingsong Wang, Jinhua Sun and Chunhua Chen
1111-1116	Amplification of electrocatalytic oxidation of NADH based on cysteine nanolayers	Abolfazl Barzegar, Ali A. Moosavi-Movahedi and Mohammad R. Ganjali
1117-1124	Electrocatalytic oxidation of ascorbic acid at a 2,2′-(1,8-octanediylbisnitriloethylidine)-bis-hydroquinone modified carbon paste electrode	Mohammad Mazloum-Ardakani, Fahime Habibollahi, Hamid Reza Zare, Hossein Naeimi and Maryam Nejati
1125-1135	Inhibition by tween-85 of the corrosion of cold rolled steel in 1.0 M hydrochloric acid solution	Xiang-Hong Li, Shu-Duan Deng, Hui Fu and Guan-Nan Mu
1137-1143	Electrochemical treatment of aqueous solutions containing urea	Wojciech Simka, Jerzy Piotrowski, Adam Robak and Ginter Nawrat
1145-1151	Effects of capacitance and resistance of MWNT-film coated electrodes on voltammetric detection of acetaminophen	Qijin Wan, Xiuwen Wang, Fen Yu, Xiaoxia Wang and Nianjun Yang
1153-1156	Electro-oxidation of ethanol on PtSn/CeO₂–C electrocatalyst	Almir Oliveira Neto, Marcelo Linardi, Daniela M. dos Anjos, Germano Tremiliosi-Filho and Estevam V. Spinacé

Volume 39, Number 8 / August 2009

1157-1162	An amorphous Si thin film anode with high capacity and long cycling life for lithium ion batteries	L. B. Chen, J. Y. Xie, H. C. Yu and T. H. Wang
1163-1167	Electrochemical sensing of the ion-channel formation of OmpF	Han Xiao, Deli Hong, Tongyang Zhu, Shanli Liu and Genxi Li
1169-1175	Electrocatalytic oxidation of glutathione at carbon paste electrode modified with 2,7-bis (ferrocenyl ethyl) fluoren-9-one: application as a voltammetric sensor	J. B. Raoof, R. Ojani and H. Karimi-Maleh
1177-1184	Determination of analgesics in pharmaceutical formulations and urine samples using nano polypyrrole modified glassy carbon electrode	B. Muralidharan, G. Gopu, C. Vedhi and P. Manisankar
1185-1192	Effects of [HMIM]HSO₄ and [OMIM]HSO₄ on the electrodeposition of zinc from sulfate electrolytes	Qibo Zhang and Yixin Hua
1193-1198	Arginine self-assembled monolayers against copper corrosion and synergistic effect of iodide ion	Da-Quan Zhang, Xian-Ming He, Qi-Rui Cai, Li-Xin Gao and Gui Soon Kim
1199-1205	Dodigen 213-N as corrosion inhibitor for ASTM 1010 mild steel in 10% HCL	M. F. L. Granero, P. H. L. S. Matai, I. V. Aoki and I. C. Guedes
1207-1216	Effects of temperature and current density on zinc electrodeposition from acidic sulfate electrolyte with [BMIM]HSO₄ as additive	Qi Bo Zhang, Yi Xin Hua, Tie Guang Dong and Dan Gui Zhou
1217-1227	Silver–copper electrodeposition from ammonium hydroxide solution: influence of EDTA and HEDTA	G. M. de Oliveira and I. A. Carlos
1229-1236	Effects of electrospun polyacrylonitrile-based carbon nanofibers as catalyst support in PEMFC	Jae-Hyun Park, Young-Wan Ju, Seok-Hwan Park, Hong-Ryun Jung and Kap-Seung Yang, et al.
1237-1242	Electro-generation of 3-methyl-2-formylaminopyridine using a bipolar membrane as separator	Yan-Hong Wang, Ri-Yao Chen, Xi Zheng, Xiu-Lin Ma and Zhen Chen
1243-1249	Correlation of thermal properties and electrical conductivity of La_0.7Sr_0.3Cu_0.2Fe_0.8O_3−δ material for solid oxide fuel cells	Jürgen Wackerl, Thomas Koppitz, Dong-Hyun Peck, Sang-Kuk Woo and Torsten Markus
1251-1257	Remediation of chromium(VI) at polypyrrole-coated titanium	Seán T. Earley, Bernadette E. Alcock, John P. Lowry and Carmel B. Breslin
1259-1265	Electrochemical corrosion properties of metal alloys used in orthopaedic implants	Murat Songür, Hüseyin Çelikkan, Faruk Gökmeşe, S. Aykin Şimşek and N. Şükrü Altun, et al.
1267-1272	Cathodic reaction kinetics and its implication on flow-assisted corrosion of aluminum alloy in aqueous ethylene glycol solution	Y. Liu and Y. F. Cheng
1273-1278	Electrochemical behavior of K₄Fe(CN)₆ in [bmim]PF₆/TX-100/H₂O based microemulsions	Xiaofang Ying, Haihui Zhou, Jiaqi Hu, Yan Xu and Jinxiang Zeng, et al.
1279-1285	Effect of polarization type on properties of Ni–W nanocrystalline electrodeposits	S. Kabi, K. Raeissi and A. Saatchi
1287-1296	Influence of electrical potential on the crystallization and adhesion of potassium hydrogen tartrate crystals	Benjamin Huerta-Ortega, Nadine Gabas and Maurice Comtat
1297-1303	Electrodeposition of Al, Mn, and Al–Mn Alloy on aluminum electrodes from molten salt (AlCl₃–NaCl–KCl)	M. Jafarian, A. Maleki, I. Danaee, F. Gobal and M. G. Mahjani
1305-1311	Effect of SiC and Al₂O₃ particles on the electrodeposition of Zn, Co and ZnCo: II. Electrodeposition in the presence of SiC and Al₂O₃ and production of ZnCo–SiC and ZnCo–Al₂O₃ coatings	Paulo C. Tulio and Ivani A. Carlos
1313-1321	ZnNi alloy electrodeposition from acid baths containing sorbitol or glycerol and characterization of ZnNi deposits	E. M. de Oliveira, W. Rubin and I. A. Carlos
1323-1330	One-step electrodeposition synthesis and electrochemical properties of Cu₆Sn₅ alloy anodes for lithium-ion batteries	Xiao-Yong Fan, Quan-Chao Zhuang, Guo-Zhen Wei, Ling Huang and Quan-Feng Dong, et al.
1331-1337	Supercapacitive properties of composite electrodes consisting of polyaniline, carbon nanotube, and RuO₂	Jang Myoun Ko, Kwang Sun Ryu, Sanghyo Kim and Kwang Man Kim
1339-1347	Synergistic effect of some antiscalants as corrosion inhibitor for industrial cooling water system	Harish Kumar Moudgil, S. Yadav, R. S. Chaudhary and Dheeraj Kumar
1349-1360	Direct electrolytic reduction of solid alumina using molten calcium chloride-alkali chloride electrolytes	Xiao Y. Yan and Derek J. Fray
1361-1367	Electrochemical comparison of IrO₂ prepared by anodic oxidation of pure iridium and IrO₂ prepared by thermal decomposition of H₂IrCl₆ precursor solution	Lassiné Ouattara, Stéphane Fierro, Olivier Frey, Milena Koudelka and Christos Comninellis
1369-1377	Electrocatalytic oxygen reduction on single-walled carbon nanotubes supported Pt alloys nanoparticles in acidic and alkaline conditions	Ahmad Nozad Golikand, Mehdi Asgari, Elaheh Lohrasbi and Mohammad Yari
1379-1384	Estimation of the effectiveness factor of an outer-sphere redox couple (Fe³⁺/Fe²⁺) using rotating disk Ti/IrO₂ electrodes of different loading	Erika Herrera Calderon, Rolf Wüthrich, Philippe Mandin, György Fóti and Christos Comninellis
1385-1392	Effects of minor additions of ruthenium on the passivation of duplex stainless-steel corrosion in concentrated hydrochloric acid solutions	El-Sayed M. Sherif, J. H. Potgieter, J. D. Comins, L. Cornish and P. A. Olubambi, et al.
1393-1397	Pulsed electrodeposition of microcrystalline chromium from trivalent Cr-DMF bath	G. Saravanan and S. Mohan
1399-1407	Synergistic effect of iodide ions on inhibitive performance of 2,5-bis(4-methoxyphenyl)-1,3,4-thiadiazole during corrosion of mild steel in 0.5 M sulfuric acid solution	Fouad Bentiss, Mounim Lebrini, Michel Traisnel and Michel Lagrenée
1409-1417	Investigation of some oleochemicals as green inhibitors on mild steel corrosion in sulfuric acid	M. Z. A. Rafiquee, Sadaf Khan, Nidhi Saxena and M. A. Quraishi

Volume 39, Number 9 / September 2009

1419-1424	Swelling effect of a polymer electrolyte membrane on the development of a semi-empirical cell voltage model	Ji Eun Choi and Young Chan Bae
1425-1436	Effect of a net on the limiting current distribution in a parallel plate electrochemical reactor: part I. Individual effects	Murali Venkatraman and J. W. Van Zee
1437-1442	Effect of a net on the limiting current distribution in a parallel plate electrochemical reactor. Part II: combined effects	Murali Venkatraman and J. W. Van Zee
1443-1449	Enhancement of electrocatalytic O₂ reduction on carbon nanotube-supported Pt alloys nanoparticles in gas diffusion electrodes	Ahmad Nozad Golikand, Elaheh Lohrasbi, Mohammad Ghannadi Maragheh and Mehdi Asgari
1451-1455	Electrochemical determination of phloroglucinol using a carbon nanotube modified electrode enhanced by surfactant	Xiao-gang Wang and Ya-juan Fan
1457-1464	Effect of laser surface melting on corrosion behaviour of AZ91D Mg alloy in simulated-modified body fluid	Y. C. Guan, Wei Zhou and H. Y. Zheng
1465-1475	Potential of aqueous extract of Hibiscus sabdariffa leaves for inhibiting the corrosion of aluminum in alkaline solutions	Ehteram A. Noor
1477-1485	A complete testing environment for the automated parallel performance characterization of biofuel cells: design, validation, and application	S. Kerzenmacher, K. Mutschler, U. Kräling, H. Baumer and J. Ducrée, et al.
1487-1495	Electrochemical properties of mixed cathode consisting of μm-sized LiCoO₂ and nm-sized Li[Co_0.1Ni_0.15Li_0.2Mn_0.55]O₂ in lithium rechargeable batteries	Kwang Man Kim, Sang Hyo Lee, Sanghyo Kim and Young-Gi Lee
1497-1501	Corrosion inhibition of mild steel in acidic media by Basic yellow 13 dye	H. Ashassi-Sorkhabi, B. Masoumi, P. Ejbari and E. Asghari
1503-1508	Effect of heat treatment on PtRu/C catalyst for methanol electro-oxidation	Min Ku Jeon, Ki Rak Lee, Hee Jung Jeon and Seong Ihl Woo
1509-1516	Electroreduction of oxygen over iron macrocyclic catalysts for DMFC applications	Alexey Alexandrovich Serov, Myoungki Min, Geunseok Chai, Sangil Han and Sang Joon Seo, et al.
1517-1523	Ceftriaxone: a novel corrosion inhibitor for mild steel in hydrochloric acid	Sudhish Kumar Shukla and M. A. Quraishi
1525-1533	Mechanism of boron tribromide electroreduction	Hüseyin Çelikkan, A. Elif Sanli, Hasan Aydin and M. Levent Aksu
1535-1543	Square-wave adsorptive stripping voltammetric determination of candesartan cilexetil in pharmaceutical formulations	İncilay Süslü, Nuran Özaltın and Sacide Altınöz
1545-1551	Electrochemical characteristics of boron doped polycrystalline diamond electrode sintered by high pressure and high temperature	J. B. Zang, Y. H. Wang, H. Huang and W. Q. Liu
1553-1558	Preparation and electrochemical characterization of platinum and ruthenium catalysts deposited on fluorinated carbon supports	Seok Kim, Hee-Jin Sohn, Sung-Kwon Hong and Soo-Jin Park
1559-1564	Comparative amperometry on ocular-surgery electrolytes in eye-splinter trauma from galvanized-steel electrochemistry	D. R. Rosseinsky, C. P. Winlove, S. M. Strawbridge, C. R. James and T. L. Kersey
1565-1572	Effect of AB₅ alloy on Ti_0.10Zr_0.15V_0.35Cr_0.10Ni_0.30 hydrogen storage alloy	Yanzhi Wang, Minshou Zhao and Limin Wang
1573-1578	Effect of additives in PEO/PAA/PMAA composite solid polymer electrolytes on the ionic conductivity and Li ion battery performance	Sang Yong An, Il Chen Jeong, Mi-Sook Won, Euh Duck Jeong and Yoon-Bo Shim
1579-1585	Influence of voltammetric parameters on Zn–Ni alloy deposition under potentiodynamic conditions	A. Petrauskas, L. Grincevičienė and A. Češūnienė
1587-1595	Effect of electrolyte characteristics on electrowinning of copper powder	Ashour Owais
1597-1602	Improving electrochemical performance of NiO films by electrodeposition on foam nickel substrates	Hongbo Wang, Qinmin Pan, Xiaopeng Wang, Geping Yin and Jianwei Zhao
1603-1608	Simultaneous determination of dopamine and uric acid on nafion/sodium dodecylbenzenesulfonate composite film modified glassy carbon electrode	Xiaomei Cao, Liqiang Luo, Yaping Ding, Dawang Yu and Yibo Gao, et al.
1609-1615	Pitch-based carbon foam electrodeposited with lead as positive current collectors for lead acid batteries	Li-Wen Ma, Bai-Zhen Chen, Ya Chen and Yan Yuan
1617-1623	Effect of nitrate ions on the corrosion of stellite in permanganate media	Veena Subramanian, Sinu Chandran, S. Velmurugan, S. Rangarajan and S. V. Narasimhan
1625-1632	Novel and efficient electrochemical way for silver nanoparticles deposition onto solid conductors: a new concept of metal-silver cathodes	Jacques Simonet
1633-1642	Electrochemical behavior of AZ91D magnesium alloy in phosphate medium: Part II. Induced passivation	Fakiha El-Taib Heakal, Amany Mohammed Fekry and Mohamad Ziad Fatayerji
1643-1649	Nano-porous SiO/carbon composite anode for lithium-ion batteries	Wei-Ren Liu, Yu-Chan Yen, Hung-Chun Wu, Martin Winter and Nae-Lih Wu
1651-1654	Electrochemical oxidation of catechol in the presence of an aromatic amine in aqueous media	Fatemeh Khaleghi, Mohammad A. Khalilzadeh, Jahan Bakhsh Raoof, Mahmood Tajbakhsh and Hassan Karimi-Maleh

Volume 39, Number 10 / October 2009

1655-1663	Electrochemical determination of elemental sulfur in Brazilian naphtha: method and validation	Daniella R. Fernandes, Paula F. de Aguiar, Jussara L. Miranda and Eliane D’Elia
1665-1670	Synthesis of Ni nanoparticles by plasma-induced cathodic discharge electrolysis	Manabu Tokushige, Tokujiro Nishikiori and Yasuhiko Ito
1671-1681	Electrodeposition and tribocorrosion behaviour of ZrO₂–Ni composite coatings	Lidia Benea
1683-1693	Electrolytic magnesium recovery from drinking water membrane residuals	Krishnakumar Raman and John J. Lenhart
1695-1702	Enhancing aluminum corrosion in water	J. Skrovan, A. Alfantazi and T. Troczynski
1703-1708	Effect of temperature change rate on the critical pitting temperature for duplex stainless steel	Lihua Zhang, Yiming Jiang, Bo Deng, Daoming Sun and Juan Gao, et al.
1709-1717	Electrochemical technique to measure Fe(II) and Fe(III) concentrations simultaneously	Xin Jin and Gerardine G. Botte
1719-1724	An investigation of phosphate based ECMP electrolyte performance on feature scale planarization	Kristin G. Shattuck and Alan C. West
1725-1731	Novel approach using EIS to study flow accelerated pitting corrosion of AA5083-H321 aluminum–magnesium alloy in NaCl solution	K. Jafarzadeh, T. Shahrabi and A. A. Oskouei
1733-1738	Electrochemical oxidation of sulfide ion at a Ti/IrO₂–Ta₂O₅ anode in the presence and absence of naphthenic acids	Jamie Haner, Dorin Bejan and Nigel J. Bunce
1739-1744	Anodic behavior of indium in KOH solution	Hebing Zhou, Mengqing Xu, Qiming Huang, Zongping Cai and Weishan Li
1745-1753	Electrochemical preparation of TiO₂/SiO₂ composite film and its high activity toward the photoelectrocatalytic degradation of methyl orange	Zhixiong Zhou, Lihua Zhu, Jing Li and Heqing Tang
1755-1762	Comparison between primary and secondary current distributions in bipolar electrochemical reactors	E. R. Henquín and J. M. Bisang
1763-1770	The effect of catalyst support on the performance of PtRu in direct borohydride fuel cell anodes	Vincent W. S. Lam, Akram Alfantazi and Előd L. Gyenge
1771-1778	Effect of wettability of anode microporous layer on performance and operation duration of passive air-breathing direct methanol fuel cells	Jun Li, Ding-ding Ye, Xun Zhu, Qiang Liao and Yu-dong Ding, et al.
1779-1787	Development of composite anode electrocatalyst for direct methanol fuel cells	Xiaoxia Li, Xinping Qiu, Long Zhao, Liquan Chen and Wentao Zhu
1789-1795	Correlation between Cu (I)-complexes and filling of via cross sections by copper electrodeposition	Kazuo Kondo, Taichi Nakamura and Naoki Okamoto
1797-1802	An electrochemical method for the preparation of CaB₆ crystal powder	Xu Wang and Yuchun Zhai
1803-1808	Pseudo-capacitance properties of porous metal oxide nanoplatelets derived from hydrotalcite-like compounds	Jun Wang, Hao Qin, Jia You, Zhanshuang Li and Piaoping Yang, et al.
1809-1819	Electrochemical evaluation of aminotriazole corrosion inhibitor under flow conditions	Armando Garnica-Rodriguez, J. Genesca, Juan Mendoza-Flores and Ruben Duran-Romero
1821-1826	Cobalt coated electrodes for high efficiency PEM fuel cells by plasma sputtering deposition	Zhe Tang, Chee Kok Poh, Kok Chung Chin, Daniel H. C. Chua and Jianyi Lin, et al.
1827-1833	Effectiveness factor of fast (Fe³⁺/Fe²⁺), moderate (Cl₂/Cl⁻) and slow (O₂/H₂O) redox couples using IrO₂-based electrodes of different loading	Erika Herrera Calderon, Alexandros Katsaounis, Rolf Wüthrich, Philippe Mandin and György Foti, et al.
1835-1848	New oxygen evolution anodes for metal electrowinning: MnO₂ composite electrodes	Sönke Schmachtel, Martina Toiminen, Kyösti Kontturi, Olof Forsén and Michael H. Barker
1849-1856	Study of the effect of mannitol on ZnNi alloy electrodeposition from acid baths and on the morphology, composition, and structure of the deposit	E. M. de Oliveira and I. A. Carlos
1857-1862	Conversion coating treatment for AZ31 magnesium alloys by a phytic acid bath	C. H. Liang, R. F. Zheng, N. B. Huang and L. S. Xu
1863-1870	Electrochemical degradation of glyphosate formulations at DSA^® anodes in chloride medium: an AOX formation study	S. Aquino Neto and A. R. De Andrade
1871-1876	Preparation and properties of Co₃O₄ nanorods as supercapacitor material	Li Cui, Juan Li and Xiao-Gang Zhang
1877-1881	Electrochemical characteristics of manganese oxide electrodes prepared by an immersion technique	Chuen-Chang Lin and Hung-Wei Chen
1883-1887	Using a galvanostatic anodization system as a water heater	M. S. Sikora, F. Trivinho-Strixino, M. E. B. R. Bello and E. C. Pereira
1889-1895	Preparation of platinum nanoparticles on polyaniline-coat multi-walled carbon nanotubes for adsorptive stripping voltammetric determination of formaldehyde in aqueous solution	Guan-Ping Jin, Juan Li and Xia Peng
1897-1905	Photoelectrochemical reaction of biomass-related compounds in a biophotochemical cell comprising a nanoporous TiO₂ film photoanode and an O₂-reducing cathode	Hirohito Ueno, Junichi Nemoto, Keita Ohnuki, Mizuki Horikawa and Mikio Hoshino, et al.
1907-1910	The oxidation of trivalent chromium at the reconstructed Au(100) electrode	P. Skołuda
1911-1916	Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy	N. Rajasekaran and S. Mohan
1917-1923	A deuterium–palladium electrode as a new sensor in non-aqueous media: the potentiometric titration of weak acids in alcohols	Lj. V. Mihajlović, S. D. Nikolić-Mandić and R. P. Mihajlović
1925-1938	Novel catalyst-support interaction for direct formic acid fuel cell anodes: Pd electrodeposition on surface-modified graphite felt	Tommy T. Cheng and Előd L. Gyenge
1939-1942	An efficient and nonflammable organic phosphate electrolyte for dye-sensitized solar cells	Yan Jiang, Pin Liu, Yuliang Cao, Jiangfeng Qian and Hanxi Yang
1943-1948	Improved performances of mechanical-activated LiMn₂O₄/MWNTs cathode for aqueous rechargeable lithium batteries	Shengyao Chen, Changhuan Mi, Linghao Su, Bo Gao and Qingbin Fu, et al.
1949-1953	Morpholinium-based ionic liquid mixtures as electrolytes in electrochemical double layer capacitors	Maciej Galinski and Izabela Stepniak
1955-1962	Extraction–electrodeposition (EX–EL) process for the recovery of palladium from high-level liquid waste	M. Jayakumar, K. A. Venkatesan, T. G. Srinivasan and P. R. Vasudeva Rao
1963-1973	Model calculations to optimise multi-cathode flow through electrolysers: direct cathodic reduction of C.I. Sulphur Black 1	Thomas Bechtold, Aurora Turcanu, Heiko Brunner and Wolfgang Schrott
1975-1982	Electrochemical studies of Zn–Ni alloy coatings from acid chloride bath	S. Basavanna and Y. Arthoba Naik
1983-1992	Fabrication of carbon nanotube and dysprosium nanowire modified electrodes as a sensor for determination of curcumin	Parandis Daneshgar, Parviz Norouzi, Ali Akbar Moosavi-Movahedi, Mohammad Reza Ganjali and Esmael Haghshenas, et al.
1993-1999	Electrochemical oxidation of perfluorobutane sulfonate using boron-doped diamond film electrodes	Zhaohui Liao and James Farrell
2001-2006	Synthesis, structural, and electrochemical performance of V₂O₅ nanotubes as cathode material for lithium battery	V. M. Mohan, Bin Hu, Weiliang Qiu and Wen Chen
2007-2013	Study of electrochemical properties and the charge/discharge mechanism for Li₄Mn₅O₁₂/MnO₂-AC hybrid supercapacitor	Hong Yan Chu, Qiong Yu Lai, Yan Jing Hao, Yan Zhao and Xiao Yun Xu
2015-2020	Electrochemical assembly of [Ru(bpy)₂tatp]²⁺ associated with surfactants on the MWNTs/GC electrode	Weiyong Zou, Li Wang, Baoyi Lu, Hong Li and Hongyu Chen
2021-2026	Codeposition of copper and tin from acid sulphate solutions containing polyether sintanol DS-10 and benzaldehyde	A. Survila, Z. Mockus, S. Kanapeckaitė, V. Jasulaitienė and R. Juškėnas
2027-2033	A new method for the simultaneous determination of Fe(III), Cu(II), Pb(II), Zn(II), Cd(II), and Ni(II) in wine using differential pulse polarography	Güler Somer and Ali Cengiz Çalışkan
2035-2042	Polymethylthiophene/Nafion-modified glassy carbon electrode for selective detection of dopamine in the presence of ascorbic acid	Vu Thi Huong, Toshinori Shimanouchi, Do Phuc Quan, Hiroshi Umakoshi and Pham Hung Viet, et al.
2043-2048	Capacitive behavior of polycarbazole- and poly(N-vinylcarbazole)-coated carbon fiber microelectrodes in various solutions	Murat Ates and A. Sezai Sarac

Volume 39, Number 11 / November 2009

2049	Foreword	Marco Panizza
2051-2059	Electrodialytic recovery of light carboxylic acids from industrial aqueous wastes	Alberto Vertova, Gabriele Aricci, Sandra Rondinini, Roberta Miglio and Lino Carnelli, et al.
2061-2072	Characterization and corrosion performance of poly(pyrrole-siloxane) films on commercial Al alloys	Monica Trueba and Stefano P. Trasatti
2073-2081	From ceria nanotubes to nanowires through electrogeneration of base	P. Bocchetta, M. Santamaria and F. Di Quarto
2083-2092	Electrochemical treatment of waters with BDD anodes: kinetics of the reactions involving chlorides	A. M. Polcaro, A. Vacca, M. Mascia, S. Palmas and J. Rodiguez Ruiz
2093-2105	Physico-chemical characterization of IrO₂–SnO₂ sol-gel nanopowders for electrochemical applications	Silvia Ardizzone, Claudia L. Bianchi, Laura Borgese, Giuseppe Cappelletti and Cristina Locatelli, et al.
2107-2113	Study of metal protective hydrophobic coatings from waterborne polyurethane ionomers	M. Delucchi, T. Trombetta, R. Ricotti, G. Cerisola and S. Turri
2115-2121	Nanostructured bimetallic alloys prepared via mechanochemical synthesis as PEMFC electrocatalysts for automotive applications	Mihaela Aneta Dumitrescu, Marialaura Lucariello, Elisabetta Arca, Maela Manzoli and Carlotta Francia, et al.
2123-2128	Molten carbonate fuel cell performance under different cathode conditions	Vittorio Odemondo, S. Dellepiane, R. Bampi and P. Capobianco
2129-2141	Conductivity studies of sol-gel prepared BaCe_0.85−xZr_xY_0.15O_3−δ solid electrolytes using impedance spectroscopy	L. Doubova, S. Barison, S. Boldrini, M. Fabrizio and C. Mortalò, et al.
2143-2149	Synthesis of novel oxidants by electrochemical technology	P. Cañizares, C. Sáez, A. Sánchez-Carretero and M. A. Rodrigo
2151-2157	Electrochemical characterisation of protective organic coatings for food packaging	F. Deflorian, S. Rossi, M. d. C. Vadillo and M. Fedel
2159-2163	Cyclic voltammetry simulation at microelectrode arrays with COMSOL Multiphysics^®	Alessandro Lavacchi, U. Bardi, C. Borri, S. Caporali and A. Fossati, et al.
2165-2172	Activation of porous Ni cathodes towards hydrogen evolution by electrodeposition of Ir nuclei	Lourdes Vázquez-Gómez, Sandro Cattarin, Rosalba Gerbasi, Paolo Guerriero and Marco Musiani
2173-2179	Investigation of low cost carbonaceous materials for application as counter electrode in dye-sensitized solar cells	T. Denaro, V. Baglio, M. Girolamo, V. Antonucci and A. S. Arico’, et al.
2181-2190	Redox thermodynamics of cytochromes c subjected to urea induced unfolding	Stefano Monari, Antonio Ranieri, Giulia Di Rocco, Gert van der Zwan and Silvia Peressini, et al.
2191-2197	Electrodeposition of PbS multilayers on Ag(111) by ECALE	V. C. Fernandes, E. Salvietti, F. Loglio, E. Lastraioli and M. Innocenti, et al.
2199-2207	Highly ionic conducting methacrylic-based gel-polymer electrolytes by UV-curing technique	C. Gerbaldi, J. R. Nair, G. Meligrana, R. Bongiovanni and S. Bodoardo, et al.
2209-2216	Voltammetric determination of methylmercury and inorganic mercury with an home made gold nanoparticle electrode	Ornella Abollino, Agnese Giacomino, Mery Malandrino, Sara Marro and Edoardo Mentasti
2217-2225	Electrocatalysis and electron transfer mechanisms in the reduction of organic halides at Ag	Abdirisak Ahmed Isse, Giacomo Berzi, Luigi Falciola, Manuela Rossi and Patrizia R. Mussini, et al.
2227-2237	Influence of calcite on the electrokinetic treatment of a natural clay	Fabio Airoldi, Cristina Jommi, Guido Musso and Elena Paglino
2239-2249	Electrochemical oxidation process for water condensates recycling in a shuttle orbiter	L. Rutigliano, D. Fino, G. Saracco, V. Specchia and P. Spinelli, et al.
2251-2255	Quantitative evaluation of oxide impurities in bright annealed stainless steels for deep drawing	M. Delucchi, A. Barbucci, R. Ricotti and G. Cerisola
2257-2264	Electrochemical performance of Ni-based anodes for solid oxide fuel cells	S. Presto, A. Barbucci, M. P. Carpanese, M. Viviani and R. Marazza
2265-2273	Photo-catalytic coating of polystyrene for household cooling appliances with self cleaning surfaces	S. Di Giulio, P. Faraldi, N. Russo, D. Fino and G. Saracco, et al.
2275-2284	Electrochemical study of self-assembled cysteine monolayers on polycrystalline gold electrodes and functionalization with microperoxidase MP-11	Ignasi Sirés, Marina Delucchi, Marco Panizza, Rico Ricotti and Giacomo Cerisola
2285-2289	Electrochemical oxidation of Acid Yellow 1 using diamond anode	J. Rodriguez, M. A. Rodrigo, M. Panizza and G. Cerisola
2291-2295	Using EIS for diagnosis of dye-sensitized solar cells performance	M. Liberatore, F. Decker, L. Burtone, V. Zardetto and T. M. Brown, et al.

Volume 39, Number 12 / December 2009

2297-2313	Electrochemical microstructured reactors: design and application in organic synthesis	A. Ziogas, G. Kolb, M. O’Connell, A. Attour and F. Lapicque, et al.
2315-2321	Electrochemical behavior of aluminum in 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid electrolytes for capacitor applications	F. Trombetta, M. O. de Souza, R. F. de Souza and E. M. A. Martini
2323-2328	Selective determination of uric acid in the presence of ascorbic acid at poly(p-aminobenzene sulfonic acid)-modified glassy carbon electrode	Hao Tang, Guang-zhi Hu, Sheng-xiang Jiang and Xia Liu
2329-2335	Effects of antimony(III) on zinc electrodeposition from acidic sulfate electrolyte containing [BMIM]HSO₄	Qibo Zhang, Yixin Hua, Yan Li and QiFei Pei
2337-2344	Copper–nickel codeposition as a model for mass-transfer characterization in copper–indium–selenium thin-film production	A. Ollivier, L. Muhr, S. Delbos, P. P. Grand and M. Matlosz, et al.
2345-2352	Inhibiting effects of 4-amino-antipyrine based schiff base derivatives on the corrosion of mild steel in hydrochloric acid	K. M. Govindaraju, D. Gopi and L. Kavitha
2353-2358	EIS and ENM as tools to evaluate inhibitive performance of second generation of phosphate-based anticorrosion pigments	R. Naderi and M. M. Attar
2359-2367	Neodymium and gadolinium extraction from molten fluorides by reduction on a reactive electrode	C. Nourry, L. Massot, P. Chamelot and P. Taxil
2369-2374	Characterization of MgMn_xFe_2−xO₄ as a possible cathode material for electrochemical reduction of NO_x	F. Bræstrup and K. K. Hansen
2375-2384	Utilization of a montmorillonite-Ca-modified carbon paste electrode for the stripping voltammetric determination of diflunisal in its pharmaceutical formulations and human blood	A. M. Beltagi
2385-2395	Organosilanes and polypyrrole as anticorrosive treatment of aluminium 2024	A. L. Correa-Borroel, S. Gutierrez, E. Arce, R. Cabrera-Sierra and P. Herrasti
2397-2408	In situ active chlorine generation for the treatment of dye-containing effluents	François Zaviska, Patrick Drogui, Jean-François Blais and Guy Mercier
2409-2414	Electro-reduction of oxygen and electro-oxidation of methanol at Pd monolayer-modified macroporous Pt electrode	Yongling Du, Kangle Lv, Biquan Su, Nuo Zhang and Chunming Wang
2415-2419	Mesoporous silica-based electrochemical sensor for simultaneous determination of honokiol and magnolol	Jun Zhao, Wensheng Huang and Xiaojiang Zheng
2421-2431	Carbon nano-tube supported Pt–Pd as methanol-resistant oxygen reduction electrocatalyts for enhancing catalytic activity in DMFCs	Ahmad Nozad Golikand, Elaheh Lohrasbi, Mohammad Ghannadi Maragheh and Mehdi Asgari
2433-2438	Preparation and electrochemical properties of spherical LiFePO₄ and LiFe_0.9Mg_0.1PO₄ cathode materials for lithium rechargeable batteries	Zhaolin Liu, Xinhui Zhang and Liang Hong
2439-2452	AC impedance investigation of conductivity of automotive lubricants using two- and four-electrode electrochemical cells	Vadim F. Lvovich and Matthew F. Smiechowski
2453-2459	Turbulent fluid flow and electrochemical mass transfer in an annular duct with an obstruction	G. Weyns, G. Nelissen, J. G. A. Pembery, P. Maciel and J. Deconinck, et al.
2461-2467	Ionic liquids based on 1-aza-bicyclo[2,2,2]octane (Quinuclidine) salts: synthesis and physicochemical properties	Jean-Yves Kazock, Mohamed Taggougui, Meriem Anouti, Patrick Willman and Bernard Carré, et al.
2469-2479	Electrochemical behaviour of Fe_xCo_3−xO₄ with (x = 0, 1, 2 and 3) oxides thin film electrodes in alkaline medium	E. Laouini, Y. Berghoute, J. Douch, M. H. Mendonça and M. Hamdani, et al.
2481-2488	Time-averaged concentration calculations in pulse electrochemical machining, spectral approach	Nico Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
2489-2496	Comparison of anodic dissolution, surface brightness and surface roughness of nanocrystalline nickel coatings with conventional decorative chromium coatings	P. Najafi Sayar and M. E. Bahrololoom
2497-2503	Electrochemical properties and simultaneous determination of dihydroxybenzene isomers at ordered mesoporous carbon-modified electrode	Jing Bai, Liping Guo, Jean Chrysostome Ndamanisha and Bin Qi
2505-2511	An electronic tongue for qualitative and quantitative analyses of anions in natural waters	Roberto Labrador, Juan Soto, Ramón Martínez-Máñez and Luis Gil
2513-2519	Electro-deposition and characterizations of nickel coatings on the carbon–polythene composite	Qian Xu, Yong-lian Qiao, Hui-jun Liu and Wei-wei Meng
2521-2528	Citrate-based zinc–polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte	B. Z. Jugović, T. Lj. Trišović, J. S. Stevanović, M. M. Gvozdenović and B. N. Grgur
2529-2533	Electrochemical synthesis of coenzymes Q_n by oxidation of tetramethoxy precursors	Maria Antonietta Sabatino, Giuseppe Filardo, Alessandro Galia and Onofrio Scialdone
2535-2543	Inhibition of CO₂ corrosion of N80 carbon steel by carboxylic quaternary imidazoline and halide ions additives	P. C. Okafor, C. B. Liu, X. Liu and Y. G. Zheng
2545-2552	Characterization of copper powder particles obtained by electrodeposition as function of different current densities	V. M. Maksimović, Lj. J. Pavlović, M. G. Pavlović and M. V. Tomić
2553-2568	Electrochemical and molecular dynamics simulation studies on the corrosion inhibition of aluminum in molar hydrochloric acid using some imidazole derivatives	K. F. Khaled and Mohammed A. Amin
2569-2577	Redox mediated electrochemical method for vat dyeing in ferric-oxalate-gluconate system: process optimization studies	R. Senthil Kumar, K. Firoz Babu, M. Noel and M. Anbu Kulandainathan
2579-2585	Composite electrodes for electrochemical supercapacitors	Gideon Moses Jacob, Quan Min Yang and Igor Zhitomirsky
2587-2592	A calibration technique for an Ag/AgCl reference electrode utilizing the relationship between the electrical conductivity and the KCl concentration of the internal electrolyte	Myung-Hee Yun, Jei-Won Yeon, Jaesik Hwang, Chang Seop Hong and Kyuseok Song
2593-2596	Electrochemical peroxidation of contaminated aqueous leachate	Ian K. Paton, Mark Lemon, Ben Freeman and Jeffrey D. Newman
2597-2603	Vinyl ethylene carbonate as an additive to ionic liquid electrolyte for lithium ion batteries	Yanbao Fu, Cheng Chen, Chenchen Qiu and Xiaohua Ma

Volume 40, Number 1 / January 2010

1-6	Structure, current efficiency, and corrosion properties of brush electrodeposited (BED) Cr from Cr(III)dimethyl formamide (DMF)-bath	G. Saravanan and S. Mohan
7-11	A three-dimensional carbon-coated LiFePO₄ electrode for high-power applications	Catia Arbizzani, Sabina Beninati and Marina Mastragostino
13-21	A microbial fuel cell using manganese oxide oxygen reduction catalysts	I. Roche, K. Katuri and K. Scott
23-28	Electrochemical and structural characterization of copper recycled from anodes of spent Li-ion batteries	V. G. Celante, M. K. Pietre and M. B. J. G. Freitas
29-38	Pseudo-half-cell measurements on symmetrical catalyst-coated membranes and their relevance for optimizing DMFC anodes	C. Wannek, S. Nehr, M. Vahlenkamp, J. Mergel and D. Stolten
39-47	The electrochemical corrosion behavior of sealed Ni–TiO₂ composite coating for sintered NdFeB magnet	Xiao-kui Yang, Qing Li, Jun-ying Hu, Xian-kang Zhong and Shi-yan Zhang
49-57	Effect of additives on electrodeposition of tin and its structural and corrosion behaviour	R. Sekar, C. Eagammai and Sobha Jayakrishnan
59-63	Hydrothermal preparation of Zn₂SnO₄ nanocrystals and photocatalytic degradation of a leather dye	Edson Luiz Foletto, Sérgio Luiz Jahn and Regina de Fátima Peralta Muniz Moreira
65-71	Novel potentiometric sensors for the selective determination of domperidone	K. Girish Kumar, Pearl Augustine and Sareena John
73-77	Ball milled cobalt oxyhydroxide coat on the surface of nickel hydroxide	Xiaofeng Li, Huichao Dong, Jiayong Li and Xia Tongchi
79-89	Electrochemical response of the two isomers conjugated acids, maleic and fumaric, on glassy carbon electrode modified with platinum nanoparticles	F. M. El-Cheikh, F. A. Rashwan, H. A. Mahmoud and Mahmoud El-Rouby
91-98	Modification of expanded graphite resulting in enhancement of electrochemical activity in the process of phenol oxidation	P. Krawczyk and J. M. Skowroński
99-107	A voltammetric study on the corrosion of prestressed steel in saturated Ca(OH)₂ solution containing chloride ions	T. Henriques, A. Reguengos, L. Proença, E. V. Pereira and M. M. Rocha, et al.
109-114	Electrochemical impedance spectroscopic characterization on nano-sized Ca₃Co₃FeO₉ electrode with enhanced capacity retention	Young-Dae Ko, Jin-Gu Kang, Jae-Gwan Park and Dong-Wan Kim
115-122	Investigation of the electrochemical behavior of catechol and 4-methylcatechol in the presence of methyl mercapto thiadiazol as a nucleophile: application to electrochemical synthesis	S. Shahrokhian and S. Rastgar
123-131	Transient film formation on chalcopyrite in acidic solutions	C. A. C. Sequeira and D. M. F. Santos
133-141	Fabrication of manganese oxide electrodes by radio frequency sputtering for electrochemical capacitors	Chuen-Chang Lin and Chih-Chung Lee
143-149	Study of bimetallic corrosion related to Cu interconnects using micropattern corrosion screening method and Tafel plots	Kyle Kai-Hung Yu, Karthikeyan S. M. Pillai, Praveen R. Nalla and Oliver Chyan
151-162	Modelling microbial fuel cells with suspended cells and added electron transfer mediator	Cristian Picioreanu, Krishna P. Katuri, Mark C. M. van Loosdrecht, Ian M. Head and Keith Scott
163-173	Antibacterial drugs as inhibitors for the corrosion of stainless steel type 304 in HCl solution	A. S. Fouda, H. A. Mostafa and H. M. El-Abbasy
175-190	Deposition of nanostructurated gold on n-doped silicon substrate by different electrochemical methods	M. Gamero and C. Alonso
191-195	Electrochemical preparation of an electroactive polymer poly(dodecyloxy dibenzothiophene) (polyDDBTh) from hydroxyl dibenzothiophene (HDBTh) as a bioconverted monomer	Hiromasa Goto, Yong-Soo Jeong, Kohsuke Kawabata, Masaki Takada and Takuya Kotanagi, et al.
197-204	Effect of adding magnesium to lithium on the performance of discharge and hydrogen evolution of the lithium anode	Kanghua Chen, Ziyan Zhang and Erfu Ni
205-207	Comment on “Numerical model for predicting the efficiency behaviour during pulsed electrochemical machining of steel in NaNO₃” [Van Damme S. et al. (2006) J Appl Electrochem 36(1):1]	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
209-213	LiVOPO₄ as an anode material for lithium ion batteries	M. M. Ren, Z. Zhou and X. P. Gao

Volume 40, Number 2 / February 2010

215-223	Protection of mild steel corrosion with new thia-derivative Salens in 0.5 M H₂SO₄ solution	M. G. Hosseini, H. Khalilpur, S. Ershad and L. Saghatforoush
225-232	Treatment of dairy wastes with a microbial anode formed from garden compost	Bibiana Cercado-Quezada, Marie-Line Delia and Alain Bergel
233-239	Electrodeposition of copper from spent Li-ion batteries by electrochemical quartz crystal microbalance and impedance spectroscopy techniques	V. G. Celante and M. B. J. G. Freitas
241-246	3D Electrodes from aluminium foams prepared by replication process	Horacio Salavagione, Richard Prieto, Emilia Morallón and Javier Narciso
247-256	Theoretical and experimental study of galvanic coupling effects between carbon steel and stainless steels	S. Qian and D. Qu
257-263	Electrodeposited platinum catalysts over hierarchical carbon monolithic support	Mariano M. Bruno, Esteban A. Franceschini, Gabriel A. Planes and Horacio R. Corti
265-275	Chemical composition and electrochemical activity of some chemically synthesized γ-MnO₂	Hemant Malankar, S. S. Umare and K. Singh
277-284	Effects of cathode impedance on the performances of power-oriented lithium ion batteries	Yi-Shiun Chen, Chi-Chang Hu and Yuan-Yao Li
285-293	Evaluation of corrosion behavior of surface modified Ti–6Al–4V ELI alloy in hanks solution	S. Tamilselvi, V. Raman and N. Rajendran
295-301	Conformation changes of polyphenol oxidase and lipoxygenase induced by PEF treatment	Wei Luo, Ruo Bing Zhang, Li Ming Wang, Jie Chen and Zhi Cheng Guan
303-310	Anodic oxidation of chlorophenols in micelles and microemulsions on glassy carbon electrode: the medium effect on electroanalysis and electrochemical detoxification	S. Anandhakumar, M. Chandrasekaran and M. Noel
311-320	Electrochemical evaluation of patinas formed on nineteenth century bronze bells	F. Rodríguez-Acuña, J. Genescá and J. Uruchurtu
321-325	The electrochemical performance of lithium–sulfur batteries with LiClO₄ DOL/DME electrolyte	Weikun Wang, You Wang, Yaqin Huang, Chongjun Huang and Zhongbao Yu, et al.
327-332	Effect of different plasticizer on structural and electrical properties of PEMA-based polymer electrolytes	S. Rajendran and M. Ramesh Prabhu
333-339	Studies on black electroless nickel coatings on titanium alloys for spacecraft thermal control applications	R. Uma Rani, A. K. Sharma, C. Minu, G. Poornima and S. Tejaswi
341-344	Ag nanowires and its application as electrode materials in electrochemical capacitor	Zhong-Ai Hu, Yao-Xian Wang, Yu-Long Xie, Yu-Ying Yang and Zi-Yu Zhang, et al.
345-356	Electrochemical assessment of the restoration and conservation of a heavily corroded archaeological iron artifact	M. Hernandez-Escampa, J. Gonzalez and J. Uruchurtu-Chavarin
357-364	Structural and photoelectrochemical characterization of oxide films formed on AISI 304 stainless steel	N. E. Hakiki
365-374	Plasma electrolytic ceramic-like aluminum oxide coatings on iron	S. A. Karpushenkov, G. L. Shchukin, A. L. Belanovich, V. P. Savenko and A. I. Kulak
375-382	Hydrazine oxidation catalyzed by ruthenium hexacyanoferrate-modified glassy carbon electrode	Wendell M. Costa, Aldaléa L. B. Marques, Edmar P. Marques, Cicero W. B. Bezerra and Eliane R. Sousa, et al.
383-391	A new look at determining acid absorption of lead oxide used in the manufacturing of Pb-acid batteries	E. E. Ferg, T. Phangalala and T. van Dyl
393-399	A study of hydroxyethyl imidazoline as H₂S corrosion inhibitor using electrochemical noise and electrochemical impedance spectroscopy	M. A. Lucio-Garcia, J. G. Gonzalez-Rodriguez, A. Martinez-Villafañe, G. Dominguez-Patiño and M. A. Neri-Flores, et al.
401-408	Ionic interactions and transport characteristics of a new polymer electrolyte system containing poly(propylene glycol) 4000 complexed with AgCF₃SO₃	S. Austin Suthanthiraraj, R. Kumar and B. Joseph Paul
409-417	Electrochemical impedance spectroscopy and cyclic voltammetry of ferrocene in acetonitrile/acetone system	Nikos G. Tsierkezos and Uwe Ritter
419-425	A novel synthesis of Fe₂P–LiFePO₄ composites for Li-ion batteries	Youyong Liu, Chuanbao Cao, Jing Li and Xingyan Xu
427-433	Comparative investigation on electroreduction of Cu(II) using polypyrrole electrode and stainless steel electrode	Ying Tian, Yanbo Wu, Liping Huang and Fenglin Yang
435-444	Electroless nickel current collector for 3D-microbatteries	T. Ripenbein, D. Golodnitsky, M. Nathan and E. Peled
445-456	Adsorption, synergistic inhibitive effect and quantum chemical studies of ampicillin (AMP) and halides for the corrosion of mild steel in H₂SO₄	Nnabuk O. Eddy, Eno E. Ebenso and Udo J. Ibok
457-461	The passivity of AISI 316L stainless steel in 0.05 M H₂SO₄	A. Fattah-alhosseini, A. Saatchi, M. A. Golozar and K. Raeissi
463-474	Influence of CTAB on the electrochemical behavior of dopamine and on its analytic determination in the presence of ascorbic acid	Silvia Corona-Avendaño, María Teresa Ramírez-Silva, Manuel Palomar-Pardavé, Leonardo Hernández-Martínez and Mario Romero-Romo, et al.

Volume 40, Number 3 / March 2010

475-483	The use of macrocyclic compounds as electrocatalysts in fuel cells	Z. P. Li and B. H. Liu
485-492	Mutagenic activity removal of selected disperse dye by photoeletrocatalytic treatment	Patrícia A. Carneiro, Danielle P. Oliveira, Gisela A. Umbuzeiro and Maria Valnice Boldrin Zanoni
493-497	Ionic liquid assisted one step green synthesis of Au–Ag bimetallic nanoparticles	Tsung-Hsuan Tsai, Soundappan Thiagarajan and Shen-Ming Chen
499-505	Differential pulse voltammetric determination of chlorphenoxamine hydrochloride and its pharmaceutical preparations using platinum and glassy carbon electrodes	Nour T. Abdel-Ghani, Gouda M. Abu-Elenien and Salwa H. Hussein
507-513	Characterization of copper–silicon nitride composite electrocoatings	Alain Robin, Júlio Cesar Pinheiro de Santana and Antonio Fernando Sartori
515-524	Lithium-metal potential in Li⁺ containing ionic liquids	Andrzej Lewandowski and Agnieszka Swiderska-Mocek
525-532	Investigation on the flow field of W-shape electrolyte flow mode in electrochemical machining	Dong Zhu, Di Zhu, Zhengyang Xu, Qing Xu and Jia Liu
533-542	Yttria-stabilized zirconia as membrane material for electrolytic deoxidation of CaO–CaCl₂ melts	A. Martin, J. C. Poignet, J. Fouletier, M. Allibert and D. Lambertin, et al.
543-549	Thermodynamics of chromate replacements by various homologous transition metal oxyanions	E. McCafferty
551-559	Screening study of spray solution parameters for depositing cerium-based conversion coatings on Al alloy 2024-T3	Shujiang Geng, Pu Yu, Matthew J. O’Keefe, William G. Fahrenholtz and Thomas J. O’Keefe
561-573	Potentiometric determination of the chloride ion activity in cement based materials	Ueli Angst, Bernhard Elsener, Claus K. Larsen and Øystein Vennesland
575-580	Direct-hydrothermal synthesis of LiFe_1−xMn_xPO₄ cathode materials	Jing Xu, Gang Chen, Hong-Jian Li and Zu-Shui Lv
581-592	New oxygen evolution anodes for metal electrowinning: investigation of local physicochemical processes on composite electrodes with conductive atomic force microscopy and scanning electrochemical microscopy	Sönke Schmachtel, Sascha E. Pust, Kyösti Kontturi, Olof Forsén and Gunther Wittstock
593-599	Functionalization of multi-walled carbon nanotube for electrocatalytic oxidation of nitric oxide	Kan Kan, Tingliang Xia, Ying Yang, Hongmei Bi and Honggang Fu, et al.
601-613	On the corrosion inhibition and adsorption behaviour of some benzotriazole derivatives during copper corrosion in nitric acid solutions: a combined experimental and theoretical study	K. F. Khaled, Mohamed A. Amin and N. A. Al-Mobarak
615-619	Degradation of indole in aqueous solution using contact glow discharge plasma	Ke Gai, Huili Qi, Yuquan Zhang and Dongping Ma
621-630	Behaviour of Al–Ga alloy during cathodic polarization	A. Višekruna, J. Radošević, S. Slavica Matešić and N. Krnić
631-637	Electrochemical corrosion behavior of Al7075 rotating disc electrode in neutral solution containing l-glutamine as a green inhibitor	H. Ashassi-Sorkhabi and E. Asghari
639-651	XPS and EIS studies of sputtered Al–Ce films formed on AA6061 aluminum alloy in 3.5% NaCl solution	M. A. Domínguez-Crespo, A. M. Torres-Huerta, S. E. Rodil, S. B. Brachetti-Sibaja and W. de la Cruz, et al.
653-662	Electrochemical behavior of copper current collector in imidazolium-based ionic liquid electrolytes	Chengxin Peng, Li Yang, Shaohua Fang, Jixian Wang and Zhengxi Zhang, et al.
663-673	Electrochemical pretreatment of distillery wastewater using aluminum electrode	B. M. Krishna, Usha N. Murthy, B. Manoj Kumar and K. S. Lokesh
675-681	Structural optimization of gas diffusion electrodes loaded with LaMnO₃ electrocatalysts	Masayoshi Yuasa, Akiko Koga, Tetsuya Kida, Kengo Shimanoe and Noboru Yamazoe
683-690	Mesh-capped probe design for direct pH measurements at an actively corroding metal surface	Jiabin Han, Bruce N. Brown, David Young and Srdjan Nešić
691-699	Electrochemical and physical characterisation of lead-based anodes in comparison to Ti–(70%) IrO₂/(30%) Ta₂O₅ dimensionally stable anodes for use in copper electrowinning	Z. S. Msindo, V. Sibanda and J. H. Potgieter
701-708	An attempt to produce NiFe₂O₄ powder from electrodeposited Fe–Ni alloy powders by subsequent recrystallization in air	U. Lačnjevac, B. M. Jović, V. M. Maksimović and V. D. Jović
709-718	Theoretical and experimental study of electrochemical reactors with three-dimensional bipolar electrodes	O. González Pérez and J. M. Bisang

Volume 40, Number 4 / April 2010

719-727	A novel IrO₂ electrode with iridium–titanium oxide interlayers from a mixture of TiN nanoparticle and H₂IrCl₆ solution	Hai-Bo Xu, Yong-Hong Lu, Chun-Hu Li and Jie-Zhen Hu
729-737	DSA electrochemical treatment of olive mill wastewater on Ti/RuO₂ anode	N. Papastefanakis, D. Mantzavinos and A. Katsaounis
739-747	Corrosion protection of mild steel by polyvinylsilsesquioxanes coatings in 3% NaCl solution	A. M. Fekry, Adlia A. A. Gasser and M. A. Ameer
749-755	Residential electrical power storage scenario simulations with a large-scale lithium ion battery	K. Darcovich, N. Gupta, I. J. Davidson and T. Caroni
757-765	Electrochemical methods to analyse the light-induced plating process	J. Bartsch, V. Radtke, C. Schetter and S. W. Glunz
767-776	Electrochemical characterization of Cu dissolution and chemical mechanical polishing in ammonium hydroxide–hydrogen peroxide based slurries	R. Prasanna Venkatesh and S. Ramanathan
777-782	Influence of cobalt on manganese incorporation in Ni–Co coatings	Meenu Srivastava, V. K. William Grips and K. S. Rajam
783-789	Preparation and electrochemical performance of Li-rich layered cathode material, Li[Ni_0.2Li_0.2Mn_0.6]O₂, for lithium-ion batteries	Feng Wu, Huaquan Lu, Yuefeng Su, Ning Li and Liying Bao, et al.
791-797	Determination of hydrogenation ability and exchange current of H₂O/H₂ system on hydrogen-absorbing metal alloys	Henryk Bala, Krystyna Giza and Iwona Kukula
799-807	Effects of iron-tetrasulfophthalocyanine on the catalytic activities of Pt/C, PtRu/C, and Pd/C catalysts in a multi-anode direct formic acid fuel cell	Xingwen Yu and Peter G. Pickup
809-819	Response of a proton exchange membrane fuel cell to a sinusoidal current load	Helge Weydahl, Magnus S. Thomassen, Børre T. Børresen and Steffen Møller-Holst
821-831	Facile synthesis and high rate capability of Li₄Ti₅O₁₂/C composite materials with controllable carbon content	Guixin Wang, Kangping Yan, Zuolong Yu and Meizhen Qu
833-840	Study on the effect of vanillin on the corrosion inhibition of aluminum alloy	R. Rosliza, A. Nora’aini and W. B. Wan Nik
841-847	Electrochemical determination of ascorbic acid at the surface of a graphite electrode modified with multi-walled carbon nanotubes/tetradecyltrimethylammonium bromide	Mahdie Motahary, Sayed Mehdi Ghoreishi, Mohsen Behpour and Mahshid Golestaneh
849-854	Behavior of hydrogen nanobubbles in alkaline electrolyzed water and its rinse effect for sulfate ion remained on nickel-plated surface	Toshikazu Takenouchi
855-864	Characterization of an electrochemical reactor for the ozone production in electrolyte-free water	Leonardo M. Da Silva, Débora V. Franco, Lindomar G. Sousa and Ismael C. Gonçalves
865-873	Electrochemical copolymerization and characterization of dianilines linked by polyether bridge with aniline	Seha Tirkeş and Ahmet M. Önal

Volume 40, Number 5 / May 2010

875	Foreword	Karel Bouzek
877-883	The use of in situ X-ray absorption spectroscopy in applied fuel cell research	Virginie Croze, Frank Ettingshausen, Julia Melke, Matthias Soehn and Dominic Stuermer, et al.
885-902	Recent developments and trends in the electrochemical promotion of catalysis (EPOC)	A. Katsaounis
903-910	Catalyst electrode preparation for PEM fuel cells by electrodeposition	Nopphawan Saibuathong, Yupa Saejeng, Kejvalee Pruksathorn, Mali Hunsom and Nisit Tantavichet
911-920	EIS measurements in the diagnosis of the environment within a PEMFC stack	S. Rodat, S. Sailler, F. Druart, P.-X. Thivel and Y. Bultel, et al.
921-932	Mathematical modeling of high-pressure PEM water electrolysis	S. A. Grigoriev, A. A. Kalinnikov, P. Millet, V. I. Porembsky and V. N. Fateev
933-941	Simulation of a high temperature electrolyzer	Dominique Grondin, Jonathan Deseure, Annabelle Brisse, Mohsine Zahid and Patrick Ozil
943-954	SOFC fuelled by methane without coking: optimization of electrochemical performance	J. M. Klein, S. Georges and Y. Bultel
955-965	Developments in the soluble lead-acid flow battery	R. G. A. Wills, J. Collins, D. Stratton-Campbell, C. T. J. Low and D. Pletcher, et al.
967-980	Mathematical modeling of AC electroosmosis in microfluidic and nanofluidic chips using equilibrium and non-equilibrium approaches	Jiří Hrdlička, Petr Červenka, Michal Přibyl and Dalimil Šnita
981-988	Pulse nickel electrolytic colouring process of anodised aluminium	M. Zemanová, M. Gál, E. Ušák and J. Jurišová
989-995	Synchronization properties of coupled electrochemical bursters
997-1004	Deposition of tin oxide, iridium and iridium oxide films by metal-organic chemical vapor deposition for electrochemical wastewater treatment	Songsak Klamklang, Hugues Vergnes, François Senocq, Kejvalee Pruksathorn and Patrick Duverneuil, et al.
1005-1018	Heterogeneous ion-selective membranes: the influence of the inert matrix polymer on the membrane properties	Karel Bouzek, Sabina Moravcová, Jan Schauer, Libuše Brožová and Zbyněk Pientka
1019-1028	The influence of electrolyte composition on electrochemical ferrate(VI) synthesis. Part I: anodic dissolution kinetics of pure iron	Zuzana Mácová, Karel Bouzek and Virender K. Sharma

Volume 40, Number 6 / June 2010

1029-1030	Foreword	Alexandra B. Ribeiro
1031-1038	Electrochemical peroxidation as a tool to remove arsenic and copper from smelter wastewater	Claudia Gutiérrez, Henrik K. Hansen, Patricio Nuñez, Pernille E. Jensen and Lisbeth M. Ottosen
1039-1047	Pulsed electrokinetic removal of Cd and Zn from fine-grained soil	Byung-Gon Ryu, Jung-Seok Yang, Do-Hyung Kim and Kitae Baek
1049-1060	Test of electrodialytic upgrading of MSWI APC residue in pilot scale: focus on reduced metal and salt leaching	Gunvor M. Kirkelund, Pernille E. Jensen, Arne Villumsen and Lisbeth M. Ottosen
1061-1068	Bentonite electrical conductivity: a model based on series–parallel transport	Ana T. Lima, J. P. Gustav Loch and Pieter J. Kleingeld
1069-1078	Electrokinetic phosphorus recovery from packed beds of sewage sludge ash: yield and energy demand	Georg Sturm, Harald Weigand, Clemens Marb, Wilfried Weiß and Bernd Huwe
1079-1083	Chloride behaviour in electromembrane treatment of brine issued from desalination plants	M. Naimi, C. Innocent and D. E. Akretche
1085-1093	Electrokinetic restoration of saline agricultural lands	Jung-Min Cho, Seon-Young Park and Kitae Baek
1095-1100	Electrodialytic remediation of copper mine tailings with sinusoidal electric field	Adrian Rojo, Henrik K. Hansen and Jorge del Campo
1101-1111	Removal of phosphate from agricultural soil by electrokinetic remediation with iron electrode	Jeong-Hee Choi, Sundaram Maruthamuthu, Hyun-Goo Lee, Tae-Hyun Ha and Jeong-Hyo Bae, et al.
1113-1121	Influence of boundary conditions on transient excess pore pressure during electrokinetic applications in soils	Laura Gabrieli and Akram N. Alshawabkeh
1123-1130	Effect of processing fluid and initial concentration on electrokinetic removal of environmental hormone—nonylphenol (NP) from soil matrix	Chung-Hsuang Hung, Ching Yuan and Kun-Cho Chen
1131-1138	The efficacy of using electrokinetic transport in highly-contaminated offshore sediments	Muhammad Haroun, George V. Chilingar and Sibel Pamukcu
1139-1144	Electrokinetic removal of chloride and sodium from tidelands	Kyung-Jo Kim, Jung-Min Cho, Kitae Baek, Jung-Seok Yang and Sung-Hwan Ko
1145-1152	Evaluation of lead removal from sandy soils using different electrolytes in electrokinetic experiments: prospective for remediation of a real site contaminated with mining wastes	B. Murillo-Rivera, I. González, M. T. Oropeza-Guzman, V. Escobar-Guerrero and E. G. Sumbarda-Ramos, et al.
1153-1160	Stepwise addition of chemical reagents for enhancing electrokinetic removal of cu from real site contaminated soils	Jih-Hsing Chang, Yan-Hsong Shi and Cheng-Hung Tung
1161-1171	Electrokinetic desalination of glazed ceramic tiles	Lisbeth M. Ottosen, Célia M. D. Ferreira and Iben V. Christensen
1173-1181	Electroremediation of air pollution control residues in a continuous reactor	Pernille E. Jensen, Célia M. D. Ferreira, Henrik K. Hansen, Jens-Ulrik Rype and Lisbeth M. Ottosen, et al.
1183-1193	Electrokinetic removal of creosote from treated timber waste: a comprehensive gas chromatographic view	Eduardo P. Mateus, Jytka Zrostlíková, Marco D. R. Gomes da Silva, Alexandra B. Ribeiro and Philip Marriott
1195-1208	Assessment of electrophoresis and electroosmosis in construction materials: effect of enhancing electrolytes and heavy metals contamination	M. Castellote, S. Botija and C. Andrade
1209-1216	Decontamination of radioactive concrete using electrokinetic technology	Gye-Nam Kim, Wang-Kyu Choi and Kune-Woo Lee
1217-1223	Alternating current electrical field effects on lettuce (Lactuca sativa) growing in hydroponic culture with and without cadmium contamination	Ran Bi, Michael Schlaak, Eike Siefert, Richard Lord and Helen Connolly
1225-1237	Physico-chemical effects on clay due to electromigration using stainless steel electrodes	C. Liaki, C. D. F. Rogers and D. I. Boardman
1239-1248	Electrokinetic remediation of gasoil contaminated soil enhanced by rhamnolipid	O. Gonzini, A. Plaza, L. Di Palma and M. C. Lobo
1249-1254	Geochemical effects of electro-osmosis in clays	J. P. Gustav Loch, Ana Teresa Lima and Pieter J. Kleingeld
1255-1261	Electrokinetic treatment for clayed and sandy soils	E. G. Sumbarda-Ramos, O. X. Guerrero-Gutierrez, B. Murillo-Rivera, I. González and M. T. Oropeza-Guzman
1263-1268	Bio-electro-remediation: electrokinetic transport of nitrate in a flow-through system for enhanced toluene biodegradation	A. Tiehm, T. Augenstein, D. Ilieva, H. Schell and C. Weidlich, et al.
1269-1279	Integrated electrokinetic-soil flushing to remove mixed organic and metal contaminants	Krishna R. Reddy, Claudio Cameselle and Prasanth Ala

Volume 40, Number 7 / July 2010

1281-1291	Photoelectrocatalysis reactivity of independent titania nanotubes	Yibing Xie and Degang Fu
1293-1306	Inhibiting effects of 5-substituted isatin-based Mannich bases on the corrosion of mild steel in hydrochloric acid solution	Ashish Kumar Singh and M. A. Quraishi
1307-1316	Synthesis of 7-ketolithocholic acid via indirect electrooxidation of chenodeoxycholic acid	Hongbin Zhao, He Tian, Yonghong Jin and Xuejun Cao
1317-1323	The formation of hydrophobic and corrosion resistant surfaces on copper and bronze by treatment in myristic acid	Ingrid Milošev, Tadeja Kosec and Marjan Bele
1325-1336	Pulse electrodeposition of Ni/nano-TiO₂ composites: effect of pulse frequency on deposits properties	S. Spanou and E. A. Pavlatou
1337-1347	Photoactive WO₃ and Se-WO₃ thin films for photoelectrochemical oxidation of organic compounds	Simona Ostachaviciute, Jonas Baltrušaitis and Eugenijus Valatka
1349-1356	Investigation of triazole derived Schiff bases as corrosion inhibitors for mild steel in hydrochloric acid medium	D. Gopi, K. M. Govindaraju and L. Kavitha
1357-1363	Catechol as an electrochemical indicator for voltammetric determination of N-acetyl-l-cysteine in aqueous media at the surface of carbon paste electrode	J. B. Raoof, R. Ojani, M. Amiri-Aref and F. Chekin
1365-1370	High temperature lithium cells using conversion oxide electrodes	Francesc Mestre-Aizpurua, Stéphane Laruelle, Sylvie Grugeon, Jean-Marie Tarascon and M. Rosa Palacín
1371-1378	Modified glassy carbon electrode with Nafion/MWNTs as a sensitive voltammetric sensor for the determination of paeonol in pharmaceutical and biological samples	Suling Yang, Lingbo Qu, Ran Yang, Jianjun Li and Lanlan Yu
1379-1385	Selective determination of dopamine in the presence of ascorbic acid using ferrocenyl-tethered PAMAM dendrimers modified glassy carbon electrode	Quanpeng Chen, Shiyun Ai, Qiang Ma and Huanshun Yin
1387-1393	Study on the preparation of Mg–Li–Mn alloys by electrochemical codeposition from LiCl–KCl–MgCl₂–MnCl₂ molten salt	Ke Ye, Mi Lin Zhang, Ye Chen, Wei Han and Yong De Yan, et al.
1395-1405	Time averaged calculations in pulse electrochemical machining, using a strongly non-linear model	N. Smets, S. Van Damme, D. De Wilde, G. Weyns and J. Deconinck
1407-1413	Electro ultrasonic remediation of polycyclic aromatic hydrocarbons from contaminated soil	Reena Amatya Shrestha, Thuy Duong Pham and Mika Sillanpää
1415-1419	Nanocrystalline NiO hollow spheres in conjunction with CMC for lithium-ion batteries	Chao Zhong, Jia-Zhao Wang, Shu-Lei Chou, Konstantin Konstantinov and Mokhlesur Rahman, et al.
1421-1427	An innovative approach to electro-oxidation of dopamine on titanium dioxide nanotubes electrode modified by gold particles	Mirghasem Hosseini, Mohamad Mohsen Momeni and Masoud Faraji
1429-1439	Electrodeposition of CuNiW alloys: thin films, nanostructured multilayers and nanowires	M. Gupta and E. J. Podlaha
1441-1442	A first course in electrode processes, 2nd edition

Volume 40, Number 8 / August 2010

1443-1448	Characteristics of a tungsten film electrodeposited in a KF–B₂O₃–WO₃ melt and preparation of W–Cu–W three-layered films for heat sink application	Koji Nitta, Toshiyuki Nohira, Rika Hagiwara, Masatoshi Majima and Shinji Inazawa
1449-1454	Electrochemical determination of thiamazole at a multi-wall carbon nanotube modified glassy carbon electrode	Xia Xi, Liang Ming and Jie Liu
1455-1460	Anodic electrodeposition of ZnO onto p-Si substrates assisted by light irradiation	K. Laurent, D. P. Yu and Y. Leprince-Wang
1461-1474	Reverse electrodialysis: evaluation of suitable electrode systems	J. Veerman, M. Saakes, S. J. Metz and G. J. Harmsen
1475-1481	Novel PEO-based solid composite polymer electrolytes with inorganic–organic hybrid polyphosphazene microspheres as fillers	Jiawei Zhang, Xiaobin Huang, Hao Wei, Jianwei Fu and Yawen Huang, et al.
1483-1491	Corrosion inhibition efficiency study in a microalloyed steel for sour service at 50 °C	A. Torres-Islas, S. Serna, J. Uruchurtu, B. Campillo and J. G. González-Rodríguez
1493-1510	Comparison between Fenton oxidation process and electrochemical oxidation for PAH removal from an amphoteric surfactant solution	Lan-Huong Tran, Patrick Drogui, Guy Mercier and Jean-François Blais
1511-1517	Electrocoagulation of fermentation wastewater by low carbon steel (Fe) and 5005 aluminium (Al) electrodes	Andrew Gadd, Dan Ryan, John Kavanagh, Anne-Laure Beaurain and Simon Luxem, et al.
1519-1527	Electrodeposited Zn–TiO₂ nanocomposite coatings and their corrosion behavior	Adriana Vlasa, Simona Varvara, Aurel Pop, Caius Bulea and Liana Maria Muresan
1529-1536	Rare earth metal salts as potential alternatives to Cr(VI) in the chlorate process	J. Gustavsson, L. Nylén and A. Cornell
1537-1543	A new sensor for the simultaneous determination of paracetamol and mefenamic acid in a pharmaceutical preparation and biological samples using copper(II) doped zeolite modified carbon paste electrode	Ali Babaei, Balal Khalilzadeh and Mohammad Afrasiabi
1545-1553	Effect of electrolyte concentration on morphology, microstructure and electrochemical impedance of anodic oxide film on titanium alloy Ti-10V–2Fe–3Al	Jianhua Liu, Junlan Yi, Songmei Li, Mei Yu and Guolong Wu, et al.
1555-1562	Surface protection of copper in aerated 3.5% sodium chloride solutions by 3-amino-5-mercapto-1,2,4-triazole as a copper corrosion inhibitor	El-Sayed M. Sherif and Abdulhakim A. Almajid
1563-1570	Electrochemical studies of zinc–cobalt alloy coatings deposited from alkaline baths containing glycine as complexing agent	M. Heydari Gharahcheshmeh and M. Heydarzadeh Sohi
1571-1574	Stearic acid modified glassy carbon electrode for electrochemical sensing of parathion and methyl parathion	J. Nancy Nirmala, A. Kumaravel and M. Chandrasekaran

Volume 40, Number 9 / September 2010

1575-1582	Effect of some tripodal bipyrazolic compounds on C38 steel corrosion in hydrochloric acid solution	B. Zerga, A. Attayibat, M. Sfaira, M. Taleb and B. Hammouti, et al.
1583-1591	Electrochemical preparation of oligo(azulene) on nanoporous TiO₂ and characterization of the composite layer	Rose-Marie Latonen, Carita Kvarnström and Ari Ivaska
1593-1603	Separation and direct detection of heavy lanthanides using new ion-exchange chromatography: fast Fourier transform continuous cyclic voltammetry system	Mohammad Reza Pourjavid, Parviz Norouzi, Hamid Rashedi and Mohammad Reza Ganjali
1605-1617	Adsorption and corrosion inhibition of amphiphilic compounds on steel pipeline grade API 5L X52 in sulphuric acid 1 M	Jonathán-Boanerge Pérez-Navarrete, C. O. Olivares-Xometl and N. V. Likhanova
1619-1624	LiFePO₄ cathode in N-methyl-N-propylpiperidinium and N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide	Andrzej Lewandowski, Ilona Acznik and Agnieszka Swiderska-Mocek
1625-1632	Study of the influence of the polyalcohol mannitol on zinc electrodeposition from an alkaline bath	M. F. de Carvalho, W. Rubin and I. A. Carlos
1633-1640	H₂S corrosion inhibition of an ultra high strength pipeline by carboxyethyl-imidazoline	E. F. Diaz, J. G. Gonzalez-Rodriguez, A. Martinez-Villafañe and C. Gaona-Tiburcio
1641-1649	Inhibition by Jasminum nudiflorum Lindl. leaves extract of the corrosion of cold rolled steel in hydrochloric acid solution	Xiang-Hong Li, Shu-Duan Deng and Hui Fu
1651-1657	Direct electrochemistry of myoglobin immobilized in NiO/MWNTs hybrid nanocomposite for electrocatalytic detection of hydrogen peroxide	Jian-Ding Qiu, San-Guan Cui, Min-Qiang Deng and Ru-Ping Liang
1659-1663	A simplified model to predict the current–voltage relationship of an electro-chlorination cell	A. Mukherjee, J. Raut and R. Venkataraghavan
1665-1670	Preparation and electrochemical characterization of LiNi_0.8Co_0.2O₂ cathode material by a modified sol–gel method	Chongqiang Zhu, Chunhui Yang, Wein-Duo Yang, Mao-Sung Wu and Huei-Mei Ysai, et al.
1671-1681	Effect of current density and electrolyte concentration on hillock growth from pure bright Sn electrodeposits	K.-W. Moon, S.-K. Kim, M. E. Williams, W. J. Boettinger and G. R. Stafford
1683-1687	Effect of metal oxides on electrochemical performances of La–Mg–Ni-based alloys	Jiansheng Hao, Shumin Han, Peng Gao, Yuan Li and Jingwu Zhang
1689-1697	Experimental and modeling of the electrodialytic and dialytic treatment of a fly ash containing Cd, Cu and Pb	A. T. Lima, A. B. Ribeiro, J. M. Rodríguez-Maroto, E. P. Mateus and A. M. Castro, et al.
1699-1704	Fabrication of indium tin oxides (ITO)-supported poly(3,4-ethylenedioxythiophene) electrodes coated with active IrO₂ layer for morphine electrooxidation	Ke-Zhong Tang, Liang Liu, Yu-Peng Hong, Ji-Ming Hu and Jian-Qing Zhang, et al.
1705-1711	Journal of Applied Electrochemistry Diary

Volume 40, Number 10 / October 2010

1713-1714	Honoring Christos Comninellis	György Foti
1715-1719	Electrochemical synthesis of perbromate using conductive-diamond anodes	C. Sáez, P. Cañizares, A. Sánchez-Carretero and M. A. Rodrigo
1721-1727	Electrochemical process for the treatment of landfill leachate	Marco Panizza, Marina Delucchi and Ignasi Sirés
1729-1736	Heterogeneous photo-electro-Fenton process using different iron supporting materials	Jonathan Ramírez, Luis A. Godínez, Marcela Méndez, Yunny Meas and Francisco J. Rodríguez
1737-1742	Photocatalytic inactivation and removal of algae with TiO₂-coated materials	Tsuyoshi Ochiai, Tomohiro Fukuda, Kazuya Nakata, Taketoshi Murakami and Donald A. Tryk, et al.
1743-1750	Adsorption layer and its characteristic to modulate the electro-oxidation runway of organic species	Nicolaos Vatistas
1751-1757	Electrochemical degradation of the Acid Blue 62 dye on a β-PbO₂ anode assessed by the response surface methodology	José M. Aquino, Romeu C. Rocha-Filho, Nerilso Bocchi and Sonia R. Biaggio
1759-1765	Electrochemical degradation of Reactive Red 120 using DSA and BDD anodes	T. Panakoulias, P. Kalatzis, D. Kalderis and A. Katsaounis
1767-1777	Single-step polyol synthesis of alloy Pt₇Sn₃ versus bi-phase Pt/SnO_x nano-catalysts of controlled size for ethanol electro-oxidation	Elena A. Baranova, Tariq Amir, Patrick H. J. Mercier, Bussaraporn Patarachao and Dashan Wang, et al.
1779-1787	Electroxidation of oxalic acid at different electrode materials	S. Ferro, C. A. Martínez-Huitle and A. De Battisti
1789-1795	Structural analyses of RuO₂–TiO₂/Ti and IrO₂–RuO₂–TiO₂/Ti anodes used in industrial chlor-alkali membrane processes	Yoshio Takasu, Wataru Sugimoto, Yoshinori Nishiki and Shuji Nakamatsu
1797-1805	Effects of the geometry and operating temperature on the stability of Ti/IrO₂–SnO₂–Sb₂O₅ electrodes for O₂ evolution	Xusong Qin, Furong Gao and Guohua Chen
1807-1816	Diamond electrodes for electrochemical analysis	Yasuaki Einaga
1817-1827	On the activation and physical degradation of boron-doped diamond surfaces brought on by cathodic pretreatments	Giancarlo R. Salazar-Banda, Adriana E. de Carvalho, Leonardo S. Andrade, Romeu C. Rocha-Filho and Luis A. Avaca
1829-1838	Peroxodisulfate generation on boron-doped diamond microelectrodes array and detection by scanning electrochemical microscopy	D. Khamis, E. Mahé, F. Dardoize and D. Devilliers
1839-1844	The effect of CVD-diamond film thickness on the electrochemical properties of synthetic diamond thin-film electrodes	M. D. Krotova, Yu. V. Pleskov, V. P. Varnin and I. G. Teremetskaya
1845-1851	Voltammetric determination of the critical micellar concentration of surfactants by using a boron doped diamond anode	Charlotte Racaud, Karine Groenen Serrano and André Savall
1853-1858	A mechanistic model of the gas film dynamics during the electrochemical discharge phenomenon	R. El-Haddad and R. Wüthrich
1859-1865	The role of TiO₂ layers deposited on YSZ on the electrochemical promotion of C₂H₄ oxidation on Pt	E. I. Papaioannou, S. Souentie, F. M. Sapountzi, A. Hammad and D. Labou, et al.
1867-1873	CGO-based electrochemical catalysts for low temperature combustion of propene	R. Karoum, V. Roche, C. Pirovano, Rose-Noelle Vannier and A. Billard, et al.
1875-1881	Synthesis and characterization of La_0.75Sr_0.25Cr_0.9M_0.1O₃ perovskites as anodes for CO-fuelled solid oxide fuel cells	K. M. Papazisi, S. Balomenou and D. Tsiplakides
1883-1891	Electrochemical characterization of the Pt/β′′–Al₂O₃ system under conditions of in situ electrochemical modification of catalytic activity for propane combustion	N. Kotsionopoulos and S. Bebelis
1893-1900	Solid electrochemical mass spectrometry (SEMS) for investigation of supported metal catalysts under high vacuum	Cyril Falgairette, Chun Xia, YongDan Li, Wolfgang Harbich and Christos Comninellis
1901-1907	Investigation of the Pt/YSZ interface at low oxygen partial pressure by solid electrochemical mass spectroscopy under high vacuum conditions	Cyril Falgairette, Chun Xia, YongDan Li, Wolfgang Harbich and György Foti, et al.
1909-1915	Journal of Applied Electrochemistry Diary

Volume 40, Number 11 / November 2010

1917-1923	Temperature dependence of morphology and oxygen reduction reaction activity for carbon-supported Pd–Co electrocatalysts	E. F. Abo Zeid, Dae-Suk Kim, Hee Soo Lee and Yong-Tae Kim
1925-1931	Usefulness of a composite electrode with a carbon surface modified by electrosynthesized polypyrrole for supercapacitor applications	A. Faye, G. Dione, M. M. Dieng, J. J. Aaron and H. Cachet, et al.
1933-1939	Influence of Nafion^® ionomer on carbon corrosion	O. V. Cherstiouk, P. A. Simonov, V. B. Fenelonov and E. R. Savinova
1941-1947	A kinetic study on the electrodeposition of nickel nanostructure and its electrocatalytic activity for hydrogen evolution reaction	Morteza Torabi and A. Dolati
1949-1956	The influence of nanocrystalline state of iron on the corrosion inhibitor behavior in aqueous solution	Vahid Afshari and Changiz Dehghanian
1957-1966	Experimental investigation of cell design for the electrolysis of iron oxide suspensions in alkaline electrolyte	Antoine Allanore, H. Lavelaine, J. P. Birat, G. Valentin and F. Lapicque
1967-1975	Electrochemical characterization of arylene vinylene oligomers containing triphenylamine and carbazole units	Loredana Vacareanu and Mircea Grigoras
1977-1984	An interesting and efficient green corrosion inhibitor for aluminium from extracts of Chlomolaena odorata L. in acidic solution	I. B. Obot and N. O. Obi-Egbedi
1985-1990	Chromium hexacyanoferrate as a cathode material in microbial fuel cells	R. Amutha, J. J. M. Josiah, J. Adriel Jebin, P. Jagannathan and Sheela Berchmans
1991-1995	Synthesis of face centered cubic and hexagonal closed packed nickel using ionic liquids	Abhishek Lahiri and Rupak Das
1997-2003	Poly(phenylenediamine) film for the construction of glucose biosensors based on platinized glassy carbon electrode	Dong-Mei Zhou, Yi-Qing Dai and Kwok-Keung Shiu
2005-2012	Studies on the electrochemical reduction processes of HTeO₂⁺ by CV and EIS	Fei-Hui Li and Wei Wang
2013-2022	Electrodeposition of Cu–Zn alloy coatings from citrate baths containing benzotriazole and cysteine as additives	F. L. G. Silva, D. C. B. do Lago, E. D’Elia and L. F. Senna
2023-2032	Electrocoagulation studies on removal of cadmium using magnesium electrode	Subramanyan Vasudevan, Jothinathan Lakshmi and Murthy Packiyam
2033-2037	Investigation on conductivity of mixed surfactants reverse microemulsion	Jiaqi Hu, Haihui Zhou, Guoping Zhang, Yanqing Cui and Liang Huang, et al.
2039-2050	Characterization of poly(vinylferrocenium) coated surfaces and their applications in DNA sensor technology	Filiz Kuralay, Arzum Erdem, Serdar Abacı, Haluk Özyörük and Attila Yıldız
2051-2059	Electrolytic preparation of cyclic multilayer Zn–Ni alloy coating using switching cathode current densities	K. Venkatakrishna and A. Chitharanjan Hegde
2061-2063	Analysis of free glycerol in biodiesel using an electrochemical assay based on a two-enzyme platinum microelectrode system	Michelle Macedo Pêgas, Roberto Salgado Amado, Eduardo Vieira de Castro and Eliane D’Elia
2065-2069	Journal of Applied Electrochemistry Diary

Volume 40, Number 12 / December 2010

2071-2076	Green synthesized Au–Ag bimetallic nanoparticles modified electrodes for the amperometric detection of hydrogen peroxide	Tsung-Hsuan Tsai, Soundappan Thiagarajan and Shen-Ming Chen
2077-2090	Flow injection potentiometric determination of Chlorphenoxamine Hydrochloride	Nour T. Abdel-Ghani and Salwa H. Hussein
2091-2098	An understanding of the electrodeposition process of Al–Mg alloys using an organometallic-based electrolyte	Sankara Sarma V. Tatiparti and Fereshteh Ebrahimi
2099-2105	Amperometric hydrogen peroxide biosensor based on a modified gold electrode with silver nanowires	Min-Jung Song, Sung Woo Hwang and Dongmok Whang
2107-2115	Inhibition effect of methyl violet on the corrosion of cold rolled steel in 1.0 M sulfuric acid solution	Shu-Duan Deng, Xiang-Hong Li and Hui Fu
2117-2124	Fluorination of Vulcan XC-72R for cathodic microporous layer of passive micro direct methanol fuel cell	Mei Chen, Shengjun Wang, Zhiqing Zou, Ting Yuan and Zhilin Li, et al.
2125-2133	Improved performance of the direct methanol redox fuel cell	Alan B. Ilicic, Mohammad S. Dara, David P. Wilkinson and Khalid Fatih
2135-2143	Corrosion inhibition of mild steel in acidic medium by poly (aniline-co-o-toluidine) doped with p-toluene sulphonic acid	Varsha Srivastava and M. M. Singh
2145-2151	Properties of silver-tin alloys obtained from pyrophosphate-cyanide electrolytes containing EDTA salts	Antoaneta Hrussanova, I. Krastev, G. Beck and A. Zielonka
2153-2160	Estimation of dehumidifying performance of solid polymer electrolytic dehumidifier for practical application	Shuichi Sakuma, Shiro Yamauchi and Osamu Takai
2161-2169	Synthesis and characterization of Ni–Al₂O₃ composite coatings containing different forms of alumina	S. T. Aruna, V. K. William Grips and K. S. Rajam
2171-2183	An experimental and theoretical investigation of adsorption characteristics of a Schiff base compound as corrosion inhibitor at mild steel/hydrochloric acid interface	I. Ahamad, C. Gupta, R. Prasad and M. A. Quraishi
2185-2191	Non-woven fabric supported poly(acrylonitrile-vinyl acetate) gel electrolyte for lithium ion battery use	Xiaoping Li, Mumin Rao, Youhao Liao, Weishan Li and Mengqing Xu
2193-2202	A new class of Sol–gel derived LiM_1xM_2yMn_2−x−yO_3.8F_0.2 (M₁ = Cr, M₂ = V; x = y = 0.2) cathodes for lithium batteries	N. Jayaprakash, N. Kalaiselvi, C. H. Doh, Gangulibabu and D. Bhuvaneswari
2203	C. Comninellis and G. Chen (eds): Electrochemistry for the environment
2205-2208	Journal of Applied Electrochemistry Diary

Volume 41, Number 1 / January 2011

1-6	Highly active carbon-supported PdNi catalyst for formic acid electrooxidation	Yanwei Gao, Gang Wang, Bing Wu, Chao Deng and Ying Gao
7-18	Adsorption properties and inhibition of mild steel corrosion in hydrochloric acid solution by ceftobiprole	Ashish Kumar Singh and M. A. Quraishi
19-27	Corrosion performance of the electroless Ni–P coatings prepared in different conditions and optimized by the Taguchi method	A. Farzaneh, M. Ehteshamzadeh and M. Mohammadi
29-37	Development of ultrasensitive surfactants doped poly(3,4-ethylenedioxythiophene)/multiwalled carbon nanotube sensor for the detection of pyrethroids and an organochlorine pesticide	PL. Abirama Sundari and P. Manisankar
39-49	Synergistic effect of additives on bright nanocrystalline zinc electrodeposition	K. O. Nayana, T. V. Venkatesha, B. M. Praveen and K. Vathsala
51-62	Electrochemical discolouration and degradation of reactive dichlorotriazine dyes: reaction pathways	Elzbieta Kusmierek, Ewa Chrzescijanska, Magdalena Szadkowska-Nicze and Joanna Kaluzna-Czaplinska
63-70	Electrocatalytic oxidation of hydroxylamine at Ni(II)-morin complex modified carbon nanotube paste electrode	Li Zheng and Jun-feng Song
71-75	Supercapacitive behaviors of worm-like mesoporous carbon in non-aqueous electrolyte	Nannan Xia, Tianxiang Zhou, Shanshan Mo, Shuangli Zhou and Wujun Zou, et al.
77-81	Ordered arrays of copper nanowires enveloped in polyaniline nanotubes	A. Prună, V. Brânzoi and F. Brânzoi
83-88	Novel Li-ion conduction on poly(vinyl acetate)-based hybrid polymer electrolytes with double plasticizers	M. Ulaganathan and S. Rajendran
89-97	The use of a rotating cylinder electrode to selective recover palladium from acid solutions used to manufacture automotive catalytic converters	J. E. Terrazas-Rodríguez, S. Gutiérrez-Granados, M. A. Alatorre-Ordaz, C. Ponce de León and F. C. Walsh
99-106	Characteristics of lithium iron phosphate mixed with nano-sized acetylene black for rechargeable lithium-ion batteries	Guoen Sun, Bo Jin, Guangping Sun, Enmei Jin and Hal-Bon Gu, et al.
107-114	Chromium electrodeposition from [BMIm][BF₄] ionic liquid	S. Survilienė, S. Eugénio and R. Vilar
115-121	Application of cobalt oxide nanoparticles as an electron transfer facilitator in direct electron transfer and biocatalytic reactivity of cytochrome c	Ali Mohammadi, Abdolmajid Bayandori Moghaddam, Sara Ahadi, Rassoul Dinarvand and Abbas Ali Khodadadi
123-127	Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium	Satendra Kumar and T. S. N. Sankara Narayanan

Volume 41, Number 2 / February 2011

129-136	Synthesis and characterization of 5 V LiCo_xNi_yMn_2−x−yO₄ (x = y = 0.25) cathode materials for use in rechargeable lithium batteries	S. Rajakumar, R. Thirunakaran, A. Sivashanmugam, Jun-ichi Yamaki and S. Gopukumar
137-142	Electrochemistry and voltammetric determination of furazolidone with a multi-walled nanotube composite film-glassy carbon electrode	Lida Fotouhi, Maryam Nemati and Majid M. Heravi
143-149	Electrochemical preparation of poly(bromothymol blue) film and its analytical application	Qin Xu, Lan-lan Chen, Gui-ju Lu, Xiao-Ya Hu and Hong-bo Li, et al.
151-159	Characterization of passivity and pitting corrosion of 3003 aluminum alloy in ethylene glycol–water solutions	Y. Liu and Y. F. Cheng
161-171	Study on the wire electrochemical groove turning process	Taha Ali El-Taweel and Sherif Araby Gouda
173-181	Photoelectrocatalytic activity of bi-layer TiO₂/WO₃ coatings for the degradation of 4-chlorophenol: effect of morphology and catalyst loading	J. Georgieva, S. Sotiropoulos, S. Armyanov, N. Philippidis and I. Poulios
183-187	The microstructure and performance of solid-state hydrogen sensor using CH₃COONH₄-doped chitosan as electrolyte	J. F. Du, Y. Bai, W. Y. Chu and L. J. Qiao
189-196	Voltammetric behavior and the determination of quercetin at a flowerlike Co₃O₄ nanoparticles modified glassy carbon electrode	MingYan Wang, DongEn Zhang, ZhiWei Tong, XingYou Xu and XuJie Yang
197-206	Performance of EDLCs using Nafion and Nafion composites as electrolyte	C. K. Subramaniam, C. S. Ramya and K. Ramya
207-214	Study on simultaneous measurements of trace gallium(III) and germanium(IV) by adsorptive stripping voltammetry using mercury film electrode	Robert Piech
215-222	Electrochemical reforming of an acidic aqueous glycerol solution on Pt electrodes	Sangkorn Kongjao, Somsak Damronglerd and Mali Hunsom
223-233	3,4-Dimethoxybenzaldehydethiosemicarbazone as corrosion inhibitor for aged 18 Ni 250 grade maraging steel in 0.5 M sulfuric acid	T. Poornima, Jagannath Nayak and A. Nityananda Shetty
235-239	The influence of aliphatic amines on the potential of the structural transition (hex) → (1 × 1) for Au (100) electrode	Piotr Skołuda
241-247	Electrochemical investigation of Al–Li/Li_xFePO₄ cells in oligo(ethylene glycol) dimethyl ether/LiPF₆	X. J. Wang, Y. N. Zhou, H. S. Lee, K. W. Nam and X. Q. Yang, et al.
249-255	A simple method for electroanalytical determination of ceftiofur in UHT milk samples using square-wave voltammetry technique	Antonio Marcos Jacques Barbosa, Tatiane Alfonso de Araújo, Magno Aparecido Gonçalves Trindade and Valdir Souza Ferreira

Volume 41, Number 3 / March 2011

257-270	Electrodeposition: a versatile and inexpensive tool for the synthesis of nanoparticles, nanorods, nanowires, and nanoclusters of metals	U. S. Mohanty
271-275	Electrochemical investigation of Li–Al anodes in oligo(ethylene glycol) dimethyl ether/LiPF₆	Y. N. Zhou, X. J. Wang, H. S. Lee, K. W. Nam and X. Q. Yang, et al.
277-287	Experimental and computational investigations of corrosion and corrosion inhibition of iron in acid solutions	K. F. Khaled
289-298	Electrochemical noise analysis on the crevice corrosion behavior of Ni–Cr–Mo–V high strength steel using recurrence plots	Tao Zhang, Yuan Cong, Yawei Shao, Guozhe Meng and Fuhui Wang
299-305	Effects of various factors on capacitive properties of VO_x·nH₂O powders in aqueous electrolyte	Lian Mei Chen, Qiong Yu Lai, Hong Mei Zeng, Yan Jing Hao and Jian Hua Huang
307-315	Effect of aluminium microstructure on corrosion and inhibiting effect of polyacrylic acid in H₂SO₄ solution	S. A. Umoren, Y. Li and F. H. Wang
317-320	Development of a new electrochemical methodology at carbon steel/Na₂S system for corrosion monitoring in oil refineries	P. R. Silva, H. A. Ponte, M. J. J. S. Ponte and N. M. S. Kaminari
321-336	Novel electrochemical measurements on direct electro-deoxidation of solid TiO₂ and ZrO₂ in molten calcium chloride medium	K. S. Mohandas and D. J. Fray
337-343	Electrochemical behavior of Ti-20Cr-X alloys in artificial saliva containing fluoride	Wen-Fu Ho, Shih-Ching Wu, Cheng-Wei Lin, Shih-Kuang Hsu and Hsueh-Chuan Hsu
345-353	A practical photoelectrochemical cell using non precious metal electrodes	Patrick Enright, Anthony Betts and John Cassidy
355-361	Mapping of pH gradients in a micrometric occluded cell: comparison with a pseudo-2D transport model	Aurélien Percheron, Bruno Vuillemin, Roland Oltra and Laurent Markey

Volume 41, Number 4 / April 2011

363-375	Electro-organic reactions. Part 60[1]. The electro-oxidative conversion at laboratory scale of a lignosulfonate into vanillin in an FM01 filter press flow reactor: preparative and mechanistic aspects	Carmen Z. Smith, James H. P. Utley and John K. Hammond
377-382	Poly(2,5-dimercapto-1,3,4-thiadiazole)/sulfonated graphene composite as cathode material for rechargeable lithium batteries	Lifeng Jin, Gengchao Wang, Xingwei Li and Liangbin Li
383-388	Inhibiting effect of cerium ions on corrosion of 3003 aluminum alloy in ethylene glycol–water solutions	Y. Liu and Y. F. Cheng
389-395	A novel perforated electrode flow through cell design for chlorine generation	Hilary Nath, Xjian Wang, Rob Torrens and Alan Langdon
397-403	Electrochromism in composite WO₃–Nb₂O₅ thin films synthesized by spray pyrolysis technique	S. H. Mujawar, A. I. Inamdar, C. A. Betty, R. Cerc Korošec and P. S. Patil
405-413	Investigation of N₂-fixation on polyaniline electrodes in methanol by electrochemical impedance spectroscopy	Fatih Köleli, Derya Röpke, Rezzan Aydin and Thorsten Röpke
415-422	The influence of citrate and tartrate on the electrodeposition and surface morphology of Cu–Ni layers	Luisa C. Melo, Pedro de Lima-Neto and Adriana N. Correia
423-433	Molecular modeling and electrochemical investigations of the corrosion inhibition of nickel using some thiosemicarbazone derivatives	K. F. Khaled
435-444	Effect of pre-treatment approach of a carbon support on activity of PtSn/C electrocatalysts for direct ethanol fuel cells	Jarupuk Thepkaew, Supaporn Therdthianwong and Apichai Therdthianwong
445-452	Solid-state dye-sensitized ZnO solar cells prepared by low-temperature methods	Yvonne Selk, Melanie Minnermann, Torsten Oekermann, Michael Wark and Jürgen Caro
453-460	Improved high-rate cyclability of sol–gel derived Cr-doped spinel LiCr_yMn_2 − yO₄ in an aqueous electrolyte	Wanmei Xu, Anbao Yuan, Lei Tian and Yuqin Wang
461-468	Corrosion- and wear-resistant properties of Ni–Al₂O₃ composite coatings containing various forms of alumina	S. T. Aruna, V. Ezhil Selvi, V. K. William Grips and K. S. Rajam
469-480	Effect of the deposition parameters on the voiding propensity of solder joints with Cu electroplated in a Hull cell	F. Wafula, Y. Liu, L. Yin, P. Borgesen and E. J. Cotts, et al.
481-490	Effect of ionic liquid additive [BMIM]HSO₄ on zinc electrodeposition from impurity-containing sulfate electrolyte. Part I: current efficiency, surface morphology, and crystal orientations	Qibo Zhang and Yixin Hua

Volume 41, Number 5 / May 2011

491-498	Inhibition of copper corrosion in acidic chloride solution by methionine combined with cetrimonium bromide/cetylpyridinium bromide	Da-Quan Zhang, Bin Xie, Li-Xin Gao, Hyung Goun Joo and Kang Yong Lee
499-506	The zirconium/hydrogen system as the solid-state reference of a high-temperature proton conductor-based hydrogen sensor	M. P. Hills, C. Schwandt and R. V. Kumar
507-517	Adsorption and inhibitive action of hexadecylpyridinium bromide on steel in phosphoric acid produced by dihydrate wet method process	Xiang-Hong Li, Shu-Duan Deng and Hui Fu
519-525	Semiconducting behavior of passive film formed on stainless steel in borate buffer solution containing sulfide	Hong-Hua Ge, Xue-Min Xu, Li Zhao, Fei Song and Jing Shen, et al.
527-534	Platinum nanoparticles self-assembled onto chitosan membrane as anode for direct methanol fuel cell	Mehri-Saddat Ekrami-Kakhki, Mozhgan Khorasani-Motlagh and Meissam Noroozifar
535-541	Study of the effect of new brightener on Zn–Ni alloy electrodeposition from acid sulphate bath	S. Basavanna and Y. Arthoba Naik
543-550	Impact of electrode separator on performance of a zinc/alkaline/manganese dioxide packed-bed electrode flow battery	Bryan D. Sawyer, Galen J. Suppes, Michael J. Gordon and Michael G. Heidlage
551-559	Surface modification effects of [Li,La]TiO₃ on the electrochemical performance of Li[Ni_0.35Co_0.3Mn_0.35]O₂ cathode material for lithium–ion batteries	Kwang Hee Jung, Ho-Gi Kim, Kwang Man Kim and Yong Joon Park
561-576	Electrochemical investigation of the roles of oxyanions in chemical–mechanical planarization of tantalum and tantalum nitride	C. M. Sulyma, C. M. Pettit, C. V. V. S. Surisetty, S. V. Babu and D. Roy
577-587	Anodic oxidation of organic pollutants on a Ti/SnO₂–Sb₂O₄ anode	L. Ciríaco, D. Santos, M. J. Pacheco and A. Lopes
589-597	Screening of PdM and PtM catalysts in a multi-anode direct formic acid fuel cell	Xingwen Yu and Peter G. Pickup
599-607	Study of electrochemical bleaching of p-nitrosodimethylaniline and its role as hydroxyl radical probe compound	Jens Muff, Lars R. Bennedsen and Erik G. Søgaard
609-616	Modelling of three-dimensional bipolar electrodes with irreversible reactions	O. González Pérez and J. M. Bisang
617-622	Nanocomposite hybrid membranes containing polyvinyl alcohol or poly(tetramethylene oxide) for fuel cell applications	Uma Thanganathan, Javier Parrondo and B. Rambabu

Volume 41, Number 6 / June 2011

623-631	Bench-scale electrochemical system for generation of CO and syn-gas	Eric J. Dufek, Tedd E. Lister and Michael E. McIlwain
633-643	Sulfuric acid–methanol electrolytes as an alternative to sulfuric–hydrofluoric acid mixtures for electropolishing of niobium	Xin Zhao, Sean G. Corcoran and Michael J. Kelley
645-656	Process intensification: water electrolysis in a centrifugal acceleration field	L. Lao, C. Ramshaw and H. Yeung
657-662	Deposition of titanium on SiC fibres from chloride melts	Joachim G. Gussone and Joachim M. Hausmann
663-668	Electrochemical fabrication of Rh–Pd particles and electrocatalytic applications	Muniyandi Rajkumar, Soundappan Thiagarajan and Shen-Ming Chen
669-679	Effect of aromatic aldehydes on the electrodeposition of ZnCo alloy from cyanide-free alkaline-gluconate electrolytes	José Luis Ortiz-Aparicio, Yunny Meas, Gabriel Trejo, Raúl Ortega and Thomas W. Chapman, et al.
681-686	Using coin cells for ultracapacitor electrode material testing	Meryl D. Stoller, Scott A. Stoller, Neil Quarles, Ji Won Suk and Shanthi Murali, et al.
687-694	Electrochemical simultaneous determination of nitrophenol isomers at nano-gold modified glassy carbon electrode	Lin Chu, Lu Han and Xiaoli Zhang
695-703	Electrokinetic decontamination of heavy metals in construction materials: contribution of the different parameters to the global efficiency	M. Castellote and S. Botija
705-712	Nucleation and growth of zinc on aluminum from acidic sulfate solution with [BMIM]HSO₄ as additive	Qibo Zhang and Yixin Hua
713-719	Impedance studies of copper electro-reduction on a disc-shaped ultramicroelectrode in industrial electrolytes	Olimpia Gładysz and Przemysław Łoś
721-730	Buffered electrochemical polishing of niobium	Gianluigi Ciovati, Hui Tian and Sean G. Corcoran
731-740	Cathodic behaviour of CoFe₂O₄ spinel electrodes in alkaline medium	E. Laouini, J. Douch, M. Hamdani, Y. Berghoute and M. H. Mendonça, et al.
741-749	Effect of sodium chloride on corrosion of mild steel in CO₂-saturated brines	Jiabin Han, J. William Carey and Jinsuo Zhang
751-756	Structural and electrochemical impedance spectroscopic studies on reactive magnetron sputtered titanium oxynitride (TiON) thin films	P. Padmavathy, R. Ananthakumar, B. Subramanian, C. Ravidhas and M. Jayachandran

Volume 41, Number 7 / July 2011

757-763	Carbon corrosion characteristics of CN_x nanostructures in acidic media and implications for ORR performance	Dieter von Deak, Elizabeth J. Biddinger and Umit S. Ozkan
765-771	Copper electrocrystallization from acidic sulfate electrolyte containing MPS additive	M. Gu and Q. Zhong
773-785	Reducing the energy cost of protective anodizing	M. Curioni, P. Skeldon, J. Ferguson and G. E. Thompson
787-793	Voltammetric studies of titanium (IV) phosphate modified with copper hexacyanoferrate and electroanalytical determination of N-acetylcysteine	Angelo Ricardo Fávaro Pipi and Devaney Ribeiro do Carmo
795-801	Electrocatalytic activity of [Ru(bpy)₃]²⁺ toward guanine oxidation upon incorporation of surfactants and SWCNTs	Miao-Jing Chen, Xue-Min Weng, Lei-Qing He, Shidang Xu and Hong Li
803-808	New anode materials of Li_1+xV_1−xO₂ (0 ≤ x ≤ 0.1) for secondary lithium batteries: correlation between structures and properties	Won-Tae Kim, Yeon Uk Jeong, Hyun Chul Choi, Young Jun Kim and Jun Ho Song, et al.
809-815	Investigations on electrochemical α-methoxylation of selected dipeptides	Wojciech Simka, Tadeusz Gorewoda, Roman Mazurkiewicz and Ginter Nawrat
817-827	Electrochemical repair techniques in carbonated concrete. Part I: electrochemical realkalisation	Elena Redaelli and Luca Bertolini
829-837	Electrochemical repair techniques in carbonated concrete. Part II: cathodic protection	Elena Redaelli and Luca Bertolini
839-848	V–I characteristics of solid polymer electrolytic (SPE) dehumidifier	Shuichi Sakuma, Shiro Yamauchi and Osamu Takai
849-857	Characterization of sulfonated poly(styrene-co-pyrrolidone) pore-filling membranes for fuel cell applications	Seung-Hee Park, Young-Woo Choi and Jin-Soo Park
859-865	Effect of sodium benzoate on zinc electrodeposition in chloride solution	Yeqiang Mo, Qiming Huang, Weishan Li, Shejun Hu and Meiling Huang, et al.
867-872	Photoelectrochemical characterization of the synthetic crednerite CuMnO₂	B. Bellal, B. Hadjarab, N. Benreguia, Y. Bessekhouad and M. Trari
873-879	Improvement of passivity of Fe–xCr Alloys (x < 10%) by cycling through the reactivation potential	Jaganathan Ulaganathan, Nick A. Senior and Roger C. Newman
881-884	A simple two-step electrochemical synthesis of graphene sheets film on the ITO electrode as supercapacitors	Sheng Liu, Junfei Ou, Jinqing Wang, Xiaohong Liu and Shengrong Yang

Volume 41, Number 8 / August 2011

885-890	Siloxane-based thin films for corrosion protection of stainless steel in chloride media	Sérgio Meth, Natali Savchenko, Federico A. Viva, David Starosvetsky and Alec Groysman, et al.
891-899	Effect of praseodymium oxide and cerium–praseodymium mixed oxide in the Pt electrocatalyst performance for the oxygen reduction reaction in PAFCs	Q. He, S. Mukerjee, S. Parres-Esclapez and A. Bueno-López
901-907	Preparation of Ni/Mn compounds/ordered mesoporous carbon composite for use in an electrochemical supercapacitor	Jicheng Feng, Bohejin Tang, Jiachang Zhao, Ping Liu and Jingli Xu
909-917	A novel zeolite-multiwalled carbon nanotube composite for the electroanalysis of copper(II) ion	S. Senthilkumar and R. Saraswathi
919-923	Using electrophoretic deposition to identify protein charge in biological medium	Decheng Meng, Lydia Francis, Ipsita Roy and Aldo R. Boccaccini
925-937	Preparation and characterisation of carbon-supported palladium nanoparticles for oxygen reduction in low temperature PEM fuel cells	G. F. Alvarez, M. Mamlouk, S. M. Senthil Kumar and K. Scott
939-949	High throughput systems for screening biomembrane interactions on fabricated mercury film electrodes	Zachary Coldrick, Abra Penezić, Blaženka Gašparović, Paul Steenson and Jon Merrifield, et al.
951-959	Corrosion behavior of Eurofer 97 and ODS-Eurofer alloys compared to traditional stainless steels	Maysa Terada, Angelo José de Oliveira Zimmermann, Hugo Ricardo Zschommler Sandim, Isolda Costa and Angelo Fernando Padilha
961-963	Electrochemical synthesis of magnesium borate whisker	Zhenhai Liang, Su Li, Pengzeng Lu and Caimei Fan
965-971	Optimizing the compatibility between dimethyl methylphosphonate (DMMP)-based electrolytes and carbonaceous anodes	H. F. Xiang, Q. Wang, D. Z. Wang, D. W. Zhang and H. H. Wang, et al.
973-981	Corrosion monitoring of type 304L stainless steel in nuclear near-high level waste by electrochemical noise	Girija Suresh, U. Kamachi Mudali and Baldev Raj
983-989	Electropolymerization of phenol on a vitreous carbon electrode in acidic aqueous solution at different temperatures	Noureddine Belhadj Tahar and André Savall
991-997	Synergistic effect of polyethylene glycol 600 and polysorbate 20 on corrosion inhibition of zinc anode in alkaline batteries	Man Liang, Hebing Zhou, Qiming Huang, Shejun Hu and Weishan Li
999-1002	Preparation and electrochemical performance of SiCN–CNTs composite anode material for lithium ion batteries	Yan Feng, Gui-Xiang Du, Xiao-Jun Zhao and En-Cui Yang

Volume 41, Number 9 / September 2011

1003	Foreword	Karel Bouzek
1005-1012	Micro-tubular solid oxide fuel cells fabricated from hollow fibres	N. Droushiotis, U. Doraswami, G. H. Kelsall and K. Li
1013-1019	Gas diffusion electrodes for high temperature PEM-type fuel cells: role of a polymer binder and method of the catalyst layer deposition	P. Mazúr, J. Soukup, M. Paidar and K. Bouzek
1021-1032	Nonlinear frequency response analysis for the diagnosis of carbon monoxide poisoning in PEM fuel cell anodes	Thomas Kadyk, Richard Hanke-Rauschenbach and Kai Sundmacher
1033-1042	Characterisation of a electrochemical hydrogen pump using electrochemical impedance spectroscopy	M.-T. Nguyen, S. A. Grigoriev, A. A. Kalinnikov, A. A. Filippov and P. Millet, et al.
1043-1052	Polymer anion selective membranes for electrolytic splitting of water. Part I: stability of ion-exchange groups and impact of the polymer binder	Jaromír Hnát, Martin Paidar, Jan Schauer, Jan Žitka and Karel Bouzek
1053-1064	Thin-film flooded agglomerate model for silver-based oxygen depolarized cathodes	Stefan Pinnow, Naresh Chavan and Thomas Turek
1065-1075	Voltage-step transient on circular electrodes	Ondrej Wein and Valentin V. Tovchigrechko
1077-1085	Pulse current electrodeposition and corrosion properties of Ni–W alloy coatings	M. Zemanová, M. Krivosudská, M. Chovancová and V. Jorík
1087-1097	Electrochemical treatment of water containing chlorides under non-ideal flow conditions with BDD anodes	A. Vacca, M. Mascia, S. Palmas and A. Da Pozzo
1099-1107	Costs estimation of an integrated process for the treatment of heavy-metal loaded aqueous effluents	J. Llanos, R. Camarillo, A. Pérez, P. Cañizares and M. A. Rodrigo
1109-1123	The occurrence of bromate and perbromate on BDD anodes during electrolysis of aqueous systems containing bromide: first systematic experimental studies	M. E. Henry Bergmann, Tatiana Iourtchouk and Johanna Rollin
1125-1133	The influence of electrolyte composition on electrochemical ferrate(VI) synthesis. Part II: anodic dissolution kinetics of a steel anode rich in silicon	Zuzana Mácová and Karel Bouzek

Volume 41, Number 10 / October 2011

1135-1136	Preface	Adam Z. Weber and Jeremy P. Meyers
1137-1164	Redox flow batteries: a review	Adam Z. Weber, Matthew M. Mench, Jeremy P. Meyers, Philip N. Ross and Jeffrey T. Gostick, et al.
1165-1166	Erratum to: Redox flow batteries: a review	Adam Z. Weber, Matthew M. Mench, Jeremy P. Meyers, Philip N. Ross and Jeffrey T. Gostick, et al.
1167-1174	Simulation and optimization of a flow battery in an area regulation application	James A. Mellentine, Walter J. Culver and Robert F. Savinell
1175-1182	Polarization curve analysis of all-vanadium redox flow batteries	Doug Aaron, Zhijiang Tang, Alexander B. Papandrew and Thomas A. Zawodzinski
1183-1190	Acceleration of the redox kinetics of VO²⁺/VO₂⁺ and V³⁺/V²⁺ couples on carbon paper	Xiong Wei Wu, Tomoo Yamamura, Suguru Ohta, Qi Xiu Zhang and Fu Cong Lv, et al.
1191-1199	Electrode kinetics in non-aqueous vanadium acetylacetonate redox flow batteries	Aaron A. Shinkle, Alice E. S. Sleightholme, Levi T. Thompson and Charles W. Monroe
1201-1213	Chemical and mechanical degradation of sulfonated poly(sulfone) membranes in vanadium redox flow batteries	Soowhan Kim, Timothy B. Tighe, Birgit Schwenzer, Jingling Yan and Jianlu Zhang, et al.
1215-1221	Effects of additives on the stability of electrolytes for all-vanadium redox flow batteries	Jianlu Zhang, Liyu Li, Zimin Nie, Baowei Chen and M. Vijayakumar, et al.
1223-1232	Performance of vanadium-oxygen redox fuel cell	Chris Menictas and Maria Skyllas-Kazacos
1233-1243	Evaluation of iodide and titanium halide redox couple combinations for common electrolyte redox flow cell systems	Maria Skyllas-Kazacos and Nicholas Milne
1245-1252	Analysis of a gas-phase Br₂–H₂ redox flow battery	Rui Zhang and John W. Weidner

Volume 41, Number 11 / November 2011

1253-1260	Anodic behaviour of fulvestrant and its voltammetric determination in pharmaceuticals and human serum on highly boron-doped diamond electrode using differential pulse adsorptive stripping voltammetry	B. Dogan-Topal, Dilek Kul, Sibel A. Ozkan and B. Uslu
1261-1267	The compatibility of transition metal oxide/carbon composite anode and ionic liquid electrolyte for the lithium-ion battery	Shu-Lei Chou, Lin Lu, Jia-Zhao Wang, M. M. Rahman and Chao Zhong, et al.
1269-1277	Evaluation of corrosion inhibitors performance using real-time monitoring methods	W. Villamizar-Suárez, J. M. Malo, A. Martínez-Villafañe and J. G. Chacon-Nava
1279-1285	Development of an adsorptive catalytic stripping voltammetric method for the determination of an endocrine disruptor pesticide chlorpyrifos and its application to the wine samples	Füsun Okçu Pelit, Hasan Ertaş and F. Nil Ertaş
1287-1294	The effect of electrochemical lithiation on physicochemical properties of RF-sputtered Sn thin films	C. S. Nimisha, G. Venkatesh, N. Munichandraiah and G. Mohan Rao
1295-1299	Formation of an SEI on a LiMn₂O₄ cathode during room temperature charge–discharge cycling studied by soft X-ray absorption spectroscopy at the Fluorine K-edge	Kyung Yoon Chung, Won-Sub Yoon, Kwang-Bum Kim, Byung-Won Cho and Xiao-Qing Yang
1301-1309	Studies on the oxidation rate of metallic inert anodes by measuring the oxygen evolved in low-temperature aluminium electrolysis	V. A. Kovrov, A. P. Khramov, Yu. P. Zaikov, V. N. Nekrasov and M. V. Ananyev
1311-1321	Adsorptive stripping voltammetric determination of podophyllotoxin, an antitumour herbal drug, at multi-walled carbon nanotube paste electrode	Riyaz Ahmad Dar, Pradeep Kumar Brahman, Sweety Tiwari and Krishna Sadashiv Pitre
1323-1328	Electrochemical sensor for bisphenol A detection based on molecularly imprinted polymers and gold nanoparticles	Jiadong Huang, Xiuming Zhang, Su Liu, Qing Lin and Xiaorui He, et al.
1329-1340	Characterization of the performance and failure mechanisms of boron-doped ultrananocrystalline diamond electrodes	Brian P. Chaplin, Ian Wyle, Hongjun Zeng, John A. Carlisle and James Farrell
1341-1347	A conducting polymer/Ag nanoparticle composite as a nitrate sensor	Muath Atmeh and Bernadette E. Alcock-Earley
1349-1355	Synthesis of LiFe_0.4Mn_0.6−xNi_xPO₄/C by co-precipitation method and its electrochemical performances	Ke Du, Luo-Hu Zhang, Yan-Bing Cao, Hong-wei Guo and Zhong-Dong Peng, et al.
1357-1366	Effect of activation on the carbon fibers from phenol–formaldehyde resins for electrochemical supercapacitors	Rong Xue, Jingwang Yan, Xiaoxue Liu, Ying Tian and Baolian Yi
1367-1371	Localized CO₂ corrosion propagation at moderate FeCO₃ supersaturation initiated by mechanical removal of corrosion scale	Jiabin Han and J. William Carey
1373-1379	Electrochemical recycling of cobalt from spent cathodes of lithium–ion batteries: its application as coating on SOFC interconnects	Eric M. Garcia, Hosane A. Tarôco, Tulio Matencio, Rosana Z. Domingues and Jacqueline A. F. dos Santos, et al.
1381-1382	Erratum to: Evaluation of electrochemical frequency modulation as a new technique for monitoring corrosion and corrosion inhibition of carbon steel in perchloric acid using hydrazine carbodithioic acid derivatives	K. F. Khaled
1383	Erratum to: Characterisation of a electrochemical hydrogen pump using electrochemical impedance spectroscopy	M.-T. Dinh Nguyen, S. A. Grigoriev, A. A. Kalinnikov, A. A. Filippov and P. Millet, et al.

Volume 41, Number 12 / December 2011

1385-1388	The enhancement effect of phosphomolybdic acid (H₃PMo₁₂O₄₀) on Pd/C catalyst for the electroreduction of hydrogen peroxide	Limei Sun, Liang Xu, Yan Zhao and Yanli Wang
1389-1396	Electrochemical detection and removal of lead in water using poly(propylene imine) modified re-compressed exfoliated graphite electrodes	Thabile Ndlovu, Omotayo A. Arotiba, Srinivasan Sampath, Rui W. Krause and Bhekie B. Mamba
1397-1406	Properties of electrodeposited silver–cobalt coatings	S. Nineva, Ts. Dobrovolska and I. Krastev
1407-1417	Time-efficient microwave synthesis of Pd nanoparticles and their electrocatalytic property in oxidation of formic acid and alcohols in alkaline media	S. K. Mehta and Sakshi Gupta
1419-1423	Silver nanoparticles/poly(2-(N-morpholine) ethane sulfonic acid) modified electrode for electrocatalytic sensing of hydrogen peroxide	Keying Zhang, Na Zhang, Jigui Xu, Hongyan Wang and Cong Wang, et al.
1425-1431	Morphology-controlled synthesis and electrocatalytic characteristics of platinum structures on micro-patterned carbon nanotube platforms	Cheng Ai Li, Kwi Nam Han, Minh-Phuong Ngoc Bui, Xuan-Hung Pham and Myung Hyo Hong, et al.